Dump while running Workflow
Hi Gurus,
I get the following dump whenever I execute my workflow :
The following syntax error occurred in the program
CL_SWF_RUN_WIM_LOCAL==========CP :
"You can only define attributes in the PUBLIC, PROTECTED or PRIVATE section"
Error in ABAP application program.
The current ABAP program "CL_SWF_RUN_WIM_FACTORY========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
I have checked the workflow config in SWU3 and find all green tick marks.
As suggested in the Dump I did the syntax check on the Class Interface CL_SWF_RUN_WIM_LOCAL
I get the following Syntax error.
Include <SWFCNTN01>
You can only define attributes in the PUBLIC,PROTECTED or PRIVATE section.
Can anybody advice me on how should I go ahead and rectify this Syntax error.
I have checked that the Include <SWFCNTN01> is defined in the Program SAPLSWUS and the Include
LSWUSTOP.
Any help is appreciated.
Thanks,
Bluesh
Include <SWFCNTN01>
Why are you using the above include? to use the macros for creating conatiner and passing teh elements.
Then instead of the above one try to use INCLUDE cntn01_swc
Similar Messages
-
Short dump while running Payroll
Dear Experts,
I am getting short dump while running the payroll for around 150 employees, but am not able to see the short dump also as it says that "process terminated".
please help me in this regard and also let me know if there could be any configuration errors.
Regards
ShansarThank you all for the response.
The issue has been resolved. i have learnt that log field should not be flagged when you are executing payroll for more than 50 employees.
Regards
Shansar -
ABAP dump while running the tcode MIGO
Hi All,
I am getting the abap dump while running the tcode MIGO when I searched I got two relevant sap notes but our functional team said that its not applicable in our case.
Please find the details of ST22 analysis-:
Runtime Errors MESSAGE_TYPE_X
Date and Time 17.04.2009 13:18:45
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
SAP Notes i have reffered 1098491, 1041122
Currently we are running on SAP_APPL 600 0007 SAPKH60007
Regards,
PrashantHi Rohit,
This particular note is valid for
Support
Packages Release Package
Name
PI 2004_1_46B SAPKIPZI38
PI 2004_1_46C SAPKIPZI48
PI 2004_1_470 SAPKIPZI58
PI 2004_1_500 SAPKIPZI68
Our system is running on PI_BASIS 2006_1_700 0005 SAPKIPYM05
Pls suggest.
Regards,
Prashant -
Core dump while running jmf application
I am running a bit customised version of Transcode & Concat from JMF samples as a single application on Solaris 10.
I got core dump while running the application.
Any clue ?
Below are the content from hs_err_pid#.out file.
+#+
+# An unexpected error has been detected by HotSpot Virtual Machine:+
+#+
+# SIGSEGV (0xb) at pc=0xfecaa04c, pid=23754, tid=97822+
+#+
+# Java VM: Java HotSpot(TM) Server VM (1.5.0_11-b03 mixed mode)+
+# Problematic frame:+
+# V [libjvm.so+0x4aa04c]+
+#+
--------------- T H R E A D ---------------
+Current thread (0x05b62e40): JavaThread "Loop thread: com.sun.media.parser.audio.WavParser$WavTrack@8d6f11" [_thread_in_vm, id=97822]+
siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x00000000
Registers:
O0=0x00008000 O1=0x00000b90 O2=0x016d8b90 O3=0xff02d024
O4=0x0000942c O5=0x00009400 O6=0xbfa7f1e0 O7=0x00009400
G1=0x00000000 G2=0x000077bc G3=0x00000000 G4=0x80000000
G5=0x00000006 G6=0x00000000 G7=0xae787200 Y=0x00000000
PC=0xfecaa04c nPC=0xfecaa050
Top of Stack: (sp=0xbfa7f1e0)
+0xbfa7f1e0: ff02d02c 00000002 00001ffc 00000001+
+0xbfa7f1f0: fefd8000 ff02d028 00008800 ff03106c+
+0xbfa7f200: ff02d9e4 00000000 00000000 05b62e40+
+0xbfa7f210: 00008374 00009638 bfa7f240 bfd04dc4+
+0xbfa7f220: 00000000 00000000 00000000 00000000+
+0xbfa7f230: 00000000 00000000 00000000 00000000+
+0xbfa7f240: feca9f1c 00007fec 00000006 00034cb8+
+0xbfa7f250: 00000005 00000002 01000000 006d81a8+
Instructions: (pc=0xfecaa04c)
+0xfecaa03c: 7f f8 86 38 90 10 00 1b 8a 10 20 06 ca 26 e0 e4+
+0xfecaa04c: ec 06 60 00 fa 05 a0 08 80 a7 60 00 02 40 00 11+
Stack: [0xbfa00000,0xbfa80000), sp=0xbfa7f1e0, free space=508k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
+V [libjvm.so+0x4aa04c]+
+C [libjmmpa.so+0x4dcc] Java_com_sun_media_codec_audio_mpa_NativeEncoder_nFlush+0x1c+
+j com.sun.media.codec.audio.mpa.NativeEncoder.nFlush(I[B)I+0+
+j com.sun.media.codec.audio.mpa.NativeEncoder.nFlush(I[B)I+0+
j com.sun.media.codec.audio.mpa.NativeEncoder.process(Ljavax/media/Buffer;Ljavax/media/Buffer;)I20+
v ~C2IAdapter
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.SourceThread.process()Z
J com.sun.media.util.LoopThread.run()V
v ~I2CAdapter
v ~StubRoutines::call_stub
+V [libjvm.so+0x19b95c]+
+V [libjvm.so+0x2c1a24]+
+V [libjvm.so+0x2e1010]+
+V [libjvm.so+0x2dcbac]+
+V [libjvm.so+0x67a7e0]+
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
+j com.sun.media.codec.audio.mpa.NativeEncoder.nFlush(I[B)I+0+
j com.sun.media.codec.audio.mpa.NativeEncoder.process(Ljavax/media/Buffer;Ljavax/media/Buffer;)I20+
v ~C2IAdapter
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.BasicFilterModule.process()V
J com.sun.media.SourceThread.process()Z
J com.sun.media.util.LoopThread.run()V
v ~I2CAdapter
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
+0x0557db38 JavaThread "Thread-3024" [_thread_blocked, id=97827]+
+0x05390a28 JavaThread "Loop thread" [_thread_blocked, id=97823]+
+=>0x05b62e40 JavaThread "Loop thread: com.sun.media.parser.audio.WavParser$WavTrack@8d6f11" [_thread_in_vm, id=97822]+
+0x05725a68 JavaThread "JMF thread: SendEventQueue: com.sun.media.ProcessEngine" [_thread_blocked, id=97814]+
+0x05303e38 JavaThread "JMF thread: SendEventQueue: com.sun.media.processor.unknown.Handler" [_thread_blocked, id=97813]+
+0x053d6848 JavaThread "Loop thread" [_thread_blocked, id=97812]+
+0x05b8d508 JavaThread "RawBufferStream Thread" [_thread_blocked, id=97811]+
+0x04a957b8 JavaThread "JMF thread: SendEventQueue: com.sun.media.ProcessEngine" [_thread_blocked, id=97806]+
+0x0573c8a0 JavaThread "JMF thread: SendEventQueue: com.sun.media.processor.unknown.Handler" [_thread_blocked, id=97805]+
+0x04be2248 JavaThread "Keep-Alive-Timer" daemon [_thread_blocked, id=97804]+
+0x00189ea0 JavaThread "Timer-1" daemon [_thread_blocked, id=38]+
+0x00e2d5f8 JavaThread "OamBus" daemon [_thread_in_native, id=26]+
+0x00e5d168 JavaThread "Dispatcher-Thread-3" daemon [_thread_blocked, id=25]+
+0x00c972b8 JavaThread "Thread-2" [_thread_blocked, id=20]+
+0x00c4e9b0 JavaThread "RMI TCP Accept-19912" daemon [_thread_in_native, id=18]+
+0x00c56c90 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=17]+
+0x00c51da0 JavaThread "Timer-0" daemon [_thread_blocked, id=16]+
+0x001ae158 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=15]+
+0x001ac898 JavaThread "CompilerThread1" daemon [_thread_blocked, id=14]+
+0x001aba20 JavaThread "CompilerThread0" daemon [_thread_blocked, id=13]+
+0x001aab08 JavaThread "AdapterThread" daemon [_thread_blocked, id=12]+
+0x001a9d68 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11]+
+0x001a90d8 JavaThread "Surrogate Locker Thread (CMS)" daemon [_thread_blocked, id=10]+
+0x0019c718 JavaThread "Finalizer" daemon [_thread_blocked, id=9]+
+0x0019c1d8 JavaThread "Reference Handler" daemon [_thread_blocked, id=8]+
+0x0003b260 JavaThread "main" [_thread_blocked, id=1]+
Other Threads:
+0x0019a0f8 VMThread [id=7]+
+0x00c55fe0 WatcherThread [id=19]+
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
par new generation total 24512K, used 3242K [0xd4800000, 0xd6000000, 0xd6000000)
eden space 24448K, 13% used [0xd4800000, 0xd4b2aa50, 0xd5fe0000)
from space 64K, 0% used [0xd5fe0000, 0xd5fe0000, 0xd5ff0000)
to space 64K, 0% used [0xd5ff0000, 0xd5ff0000, 0xd6000000)
concurrent mark-sweep generation total 499712K, used 263197K [0xd6000000, 0xf4800000, 0xf4800000)
concurrent-mark-sweep perm gen total 50712K, used 30431K [0xf4800000, 0xf7986000, 0xf8800000)
Dynamic libraries:
+0x00010000 /usr/jdk/instances/jdk1.5.0/bin/java+
+0xff390000 /usr/lib/libthread.so.1+
+0xff360000 /usr/lib/libdl.so.1+
+0xff200000 /usr/lib/libc.so.1+
+0xff380000 /platform/SUNW,Netra-440/lib/libc_psr.so.1+
+0xfe800000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/server/libjvm.so+
+0xff300000 /usr/lib/libsocket.so.1+
+0xff330000 /usr/lib/libsched.so.1+
+0xff1c0000 /usr/lib/libCrun.so.1+
+0xff190000 /usr/lib/libm.so.1+
+0xff080000 /usr/lib/libnsl.so.1+
+0xfe700000 /usr/lib/libm.so.2+
+0xff160000 /usr/lib/libscf.so.1+
+0xff140000 /usr/lib/libdoor.so.1+
+0xff060000 /usr/lib/libuutil.so.1+
+0xfe7d0000 /usr/lib/libgen.so.1+
+0xfe6d0000 /usr/lib/libmd.so.1+
+0xfe6b0000 /platform/SUNW,Netra-440/lib/libmd_psr.so.1+
+0xfe690000 /usr/lib/libmp.so.2+
+0xfe650000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/native_threads/libhpi.so+
+0xfe5c0000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libverify.so+
+0xfe580000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libjava.so+
+0xfe560000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libzip.so+
+0xfe410000 /usr/lib/locale/en_US/en_US.so.3+
+0xfe310000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libmanagement.so+
+0xfe250000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libnet.so+
+0xcc450000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libj2pkcs11.so+
+0xcc410000 /usr/lib/libpkcs11.so+
+0xcc3f0000 /usr/lib/libcryptoutil.so.1+
+0xcc340000 /usr/lib/security/pkcs11_softtoken.so+
+0xcc3d0000 /opt/tib/EAG/tibrv/lib/libtibrvj.so+
+0xcc310000 /opt/tib/EAG/tibrv/lib/libtibrvcmq.so+
+0xcc250000 /opt/tib/EAG/tibrv/lib/libtibrvcm.so+
+0xcc230000 /opt/tib/EAG/tibrv/lib/libtibrvft.so+
+0xcc110000 /opt/tib/EAG/tibrv/lib/libtibrv.so+
+0xccbf0000 /usr/lib/libpthread.so.1+
+0xcc210000 /usr/lib/libkstat.so.1+
+0xcc050000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libnio.so+
+0xcc030000 /usr/lib/librt.so.1+
+0xcc010000 /usr/lib/libaio.so.1+
+0xc0680000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libawt.so+
+0xc0500000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libmlib_image.so+
+0xcb920000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/headless/libmawt.so+
+0xcb850000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libjmutil.so+
+0xbfd80000 /usr/lib/libX11.so.4+
+0xcb810000 /usr/openwin/lib/libXext.so.0+
+0xbfd00000 /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libjmmpa.so+
VM Arguments:
jvm_args: -DappInstanceId=19912 -DsocketCountPorts= -Dlog4j.configuration=DCL_BusListener-19912-5.1.2-log4j.xml -Dcfg.uri=/u01/home/ihome/ops/Server/cfg/dcl_bus_responder.xml -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Dcom.sun.management.jmxremote.port=19912 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.awt.headless=true -Dargos.group=VMABusListener -Dspring.bootstrap=spring/VoiceMailAdapter/dcl/DCLSpringBootstrapContext.xml -Xmx512m -Xms512m -verbose:gc -XX:PrintGCDetails -XX:+PrintGCApplicationConcurrentTime -XX:+PrintGCApplicationStoppedTime -XX:MaxNewSize=24m -XX:NewSize=24m -XX:+UseParNewGC -XX:+CMSParallelRemarkEnabled -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancyFraction=60+
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=/usr/jdk/latest
PATH=/usr/jdk/latest/bin:/usr/local/bin:/usr/jdk/latest/bin:/usr/local/bin:/usr/sbin:/usr/bin:/usr/sfw/bin:/opt/sfw/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/sadm/bin:/usr/proc/bin:/opt/tib/EAG/tibrv:.:/u01/home/ihome/.bin:/usr/sfw/bin:/opt/tib/EAG/tibrv/bin:/u01/app/oracle/product/10.2.0/db10g/bin:/opt/tib/EAG/tibrv:.:/u01/home/ihome/.bin:/usr/sfw/bin:/opt/tib/EAG/tibrv/bin:/u01/app/oracle/product/10.2.0/db10g/bin
LD_LIBRARY_PATH=/usr/jdk/instances/jdk1.5.0/jre/lib/sparc/server:/usr/jdk/instances/jdk1.5.0/jre/lib/sparc:/usr/jdk/instances/jdk1.5.0/jre/../lib/sparc:/opt/tib/EAG/tibrv/lib:/opt/tib/EAG/tibrv/lib
SHELL=/usr/bin/bash
Signal Handlers:
+SIGSEGV: [libjvm.so+0x709bb4], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
+SIGBUS: [libjvm.so+0x709bb4], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
+SIGFPE: [libjvm.so+0x274474], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c+
SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
+SIGILL: [libjvm.so+0x274474], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c+
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGHUP: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
+SIGQUIT: [libjvm.so+0x67bb74], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
+SIGTERM: [libjvm.so+0x67bb74], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
--------------- S Y S T E M ---------------
OS: Solaris 10 11/06 s10s_u3wos_10 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 14 November 2006
uname:SunOS 5.10 Generic_127111-11 sun4u (T2 libthread)
rlimit: STACK 8192k, CORE infinity, NOFILE 65536, AS infinity
load average:9.45 9.59 9.62
CPU:total 4 has_v8, has_v9, has_vis1, has_vis2, is_ultra3
Memory: 8k page, physical 16777216k(6702928k free)
vm_info: Java HotSpot(TM) Server VM (1.5.0_11-b03) for solaris-sparc, built on Dec 15 2006 01:18:11 by unknown with unknown Workshop:0x550Hello captfoss!
The Linux video drivers are buggy. If you give them video they don't like, they crash.You seem to repeat this statement quite often......but I don't think s/he is using Linux. S/He is using Solaris10 !!!
I don't know if Linux and Solaris are same OS.............
Thanks! And please don't take it as a comment! :-) -
Dump while running a stock report for one year
hi experts,
i'm getting dump error while running a stock summary report for one year
the error is as follows:
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the
exception
condition "CNTL_ERROR".
regards,
andrews.Hi Andrew,
Did you try running the report for a smaller period of maybe a month. Check for any authorisation related issues.
The dump has a lot of detailed and valuable information about the error. If feasible, post the dump data for further analysis.
Regards,
Pranav.
Edited by: Pranav Mandelia on Sep 6, 2011 2:07 PM -
DUMP while running the program RSAR_RSISOSMAP_REPAIR
Hi Experts,
I am facing the dump while executing the DTP. the dump is ITAB_DUPLICATE_KEY.to fix the error ITAB_DUPLICATE_KEY I am referring to the below link :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a&overridelayout=true
i have run the program RSAR_RSISOSMAP_REPAIR with the repair indicator set.
the issue is its not executing successfully.kinldy help me in this.
the abap errror i m getting while execution of program RSAR_RSISOSMAP_REPAIR is as :
TSPREFIX for TCD500-1 not found.
Kindly help me in resolving the above error TSPREFIX for TCD500-1 not found, where TCD500-1 is my development R/3 system .
Kindly advise.
thanks & regards ,
M.S
Edited by: M.S on Dec 9, 2009 6:41 AMHi,
1) TCD for testing transactions, especially those that do not use controls
2)TCD has the following advantages
3)It has a built in screen simulation for standard screen element
4) No GUI is required for playback
5) It is suitable for load testing
6) The TCD command has the same limitations as the CATT function of the same name. The flow of data to and from controls, as well as screen input values, are recorded. When the test script runs, the controls are deactivated and the user's actions are simulated by reading the recorded data flows
For more info on TCD go through the below link
http://help.sap.com/saphelp_sm32/helpdata/en/83/77cd3b4261706fe10000000a11402f/content.htm
Regards,
Marasa. -
Short Dump While Running infopackage
Hello All,
While Running infopackae for Master data i am getting a dump MESSAGE_TYPE_X" C
CL_RSDMD_UPDATE_MASTER_DATA===CP" or "CL_RSDMD_UPDATE_MASTER_DATA===CM00R"
CHECKDATA_PACKET".
Data is comming to PSA without any Errors,But while loading to Infoobject Table i am getting the Dump.
What can be the problem?Hi,
Force the request to red and reload to PSA first and then to target manually.
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can try to overcome this issue.
Thanks,
JituK -
Short dump while running Alert Monitor
Hi,
I am getting a short dump while determining alert in Alert Monitor through T. Code /SAPAPO/AMON1. The error says as below:
Runtime Errors BCD_NO_SIGN
Short text : A packed number contains no sign.
What happened? : Error in the ABAP Application Program, The current ABAP program "SAPLKKBL" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Information on where terminated : Termination occurred in the ABAP program "SAPLKKBL" - in "FB_OUTTAB_SORT2".Hi Axon Generic,
Please checkon the following
1) In the overall profile of alert monitor, check the relative
time interval whether specified correctly
2) Under the alert profile in Overall profile, check the
threshold values are defined correctly
3) Check the SAP Note 151709 , 189061
Please confirm your findings.
Regards
R. Senthil Mareeswaran. -
Dump while running report in background
Hi Experts,
I have created one report to create the conditions record by using BDC. The program is uploading the data from file which is located at local server and at selection screen, path of file is defined.
When i run the report in foreground it works fine, first it uploaded that data and then created BDC and record saved successfully. But if i run the program in background and check the job status through SM37 , job get canceled due to the dump. The dump message is "Exception condition "NO_BATCH" raised."
The FM which i am using currently in my code to upload the data is "GUI_UPLOAD", i tried the same thing with FM "ALSM_EXCEL_TO_INTERNAL_TABLE" as well, but same dump is coming.
Please advice if anyone have some solution.
Thanks & Regards,
SwatiHi,
The FM GUI_UPLOAD, wont work in the background jobs. This is the reason for the dump.
As the backround job runs at the application server, the program cannot identidy the presentation server (local system) file path.
To avoid this store and read file from application server.
Thanks & Regards,
Navneeth K. -
Dear All,
I am trying to run MRP for a single item at a single level. The program is giving a dump.
If anyone knows a way around kindly tell me.
Thanks. Anu.
SHORT DUMP:
Runtime errors PERFORM_CONFLICT_TAB_TYPE
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE
Occurred on 28.02.2008 at 12:19:49
Illegal type when passing an internal table to a FORM
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINU" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A FORM was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Incorrect FORM call.
The FORM call is incorrect for parameter number 1.
The current internal table passed to the formal table parameter has
a type that is not compatible with the type of the formal parameter.
The condition selected below has been violated:
(" ") The access types defined for the tables are incompatible.
The following hierarchy shows the compatibility rules:
ANY_TABLE
INDEX_TABLE HASHED_TABLE
STANDARD_TABLE SORTED_TABLE
A concrete access type is only compatible with types higher
in the hierarchy. For example, STANDARD_TABLE is compatible
with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.
("X") The line types of the tables are incompatible.
(" ") The table keys of the tables are not identical.
(" ") One of the tables has a UNIQUE key, but the other has a
NON-UNIQUE key.
How to correct the error
The exception must either be prevented, caught within the procedure
"ME_UPDATE_AGREEMENT_PO"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"SAPLEINU" or "LEINUU04"
"ME_UPDATE_AGREEMENT_PO"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.Dear All,
I am trying to run MRP for a single item at a single level. The program is giving a dump.
If anyone knows a way around kindly tell me.
Thanks. Anu.
SHORT DUMP:
Runtime errors PERFORM_CONFLICT_TAB_TYPE
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE
Occurred on 28.02.2008 at 12:19:49
Illegal type when passing an internal table to a FORM
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINU" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A FORM was called incorrectly.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Incorrect FORM call.
The FORM call is incorrect for parameter number 1.
The current internal table passed to the formal table parameter has
a type that is not compatible with the type of the formal parameter.
The condition selected below has been violated:
(" ") The access types defined for the tables are incompatible.
The following hierarchy shows the compatibility rules:
ANY_TABLE
INDEX_TABLE HASHED_TABLE
STANDARD_TABLE SORTED_TABLE
A concrete access type is only compatible with types higher
in the hierarchy. For example, STANDARD_TABLE is compatible
with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.
("X") The line types of the tables are incompatible.
(" ") The table keys of the tables are not identical.
(" ") One of the tables has a UNIQUE key, but the other has a
NON-UNIQUE key.
How to correct the error
The exception must either be prevented, caught within the procedure
"ME_UPDATE_AGREEMENT_PO"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"SAPLEINU" or "LEINUU04"
"ME_UPDATE_AGREEMENT_PO"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error. -
DUMP while running my import FM
Hi ALL,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither
caught nor passed along using a RAISING clause, in the procedure
"MO_IMPORT_MODIFICATIONS" "(METHOD)"
"Length error occurred during the IMPORT statement."
"The system found when importing that the target object was longer or
shorter than the object to be imported."
where did i mistake while import ? or while transport?
That FM is working properly in our DEV.
Thanks in Advance,
Madhu.If you go from se37 and se80 same result ..its going for DUMP.
it giving me error in this SAP std method MO_IMPORT_MODIFICATIONS
Length error occurred during the IMPORT statement.
<<<<< IMPORT old_import TO old_import
old_export TO old_export
old_change TO old_change
Madhu -
Dear Expert,
Please correct if i am wrong.
We always run payroll with Log only.It does not matter,we are running in test mode or in live run.
Now in my current situation,, when i am running payroll for 2500 emp, system is giving dump stating that no memory location.
Then basis guy increase the memory allocation, but still giving the error.
Now my basis guy said that, you have to run payroll in background.
SO how should i go now.
Request to all experts, please share some information on this.
Regards,
sharmaDear Remi,
Thanks a lot for reply on the same.
Yes i run payroll without log.and also that time its working fine.
I request to you,, please advice me we should run payroll with log or without log in simulation as well in Live run.
Accordingly i update you by checking all the things.
Regards,
sharma -
Dump while running in FG mode at different places
We are running a Z transaction which is related to some trading of shares.
It is handling huge data.
when run in fore ground, its throwing dump at different places each time, its run.
For ex: CL_OS_CA_COMMON->Method SM_UPDATE_SUBSCRIPTIONS
In a different run, it failed at class CA_COL_POSITION_TRQ -> Method MAP_LOAD_FROM_DATABASE_GUID.
But the reason it states in both the cases is Maximum permitted time is reached.
We tried to improve the performance of the program technically and still getting dump.
So we want to post a message to SAP. For this, I need to know the module am dealing with. How Do I find that exactly.
As I was extracting my main data from table FMFINCODE, I thought its FUND MANAGEMENT.
Please help me in both the cases.
I also want to know, if a class is released for customer re-use or not?
Thanks
KiranHi Rob,
Do you mean to say, SAP doesnt support custom transactions?
I did try se30 but I tried to reduce to the extent I could.
Any thoughts on the last question? If a class is for Customer re-use.
Thanks
Kiran -
Reg : Short Dump While Activating Workflow
Hi All,
This morning I added a condition step in my workflow and created two custom methods in the corresponding BO and used them in the task. Initially when i made the changes in the workflow and tested it, it was working fine. But after sometime, when I did the necessary binding and tried to activate the workflow, the workflow started resulting in short dump.
Below is the dump analysis.
SAPSQL_ARRAY_INSERT_DUPREC
The ABAP/4 Open SQL array insert results in duplicate database records.
000310 L_OTYPE EQ ORG_OBJTYPE_WORKFLOW.
000320 LOOP AT ACT_LINES.
000330 MOVE-CORRESPONDING ACT_WFDKEY TO ACT_LINES.
000340 MOVE ACT_CLIENT TO ACT_LINES-CLIENT.
000350 MODIFY ACT_LINES.
000360 ENDLOOP.
000370 ELSE.
000380 MESSAGE E280 WITH L_OTYPE RAISING INVALID_OBJECT_TYPE.
000390 ENDIF.
000400
000410 *- insert lines table
------> INSERT SWD_LINES CLIENT SPECIFIED FROM TABLE ACT_LINES.
000430 IF SY-SUBRC NE 0.
000440 MESSAGE E281 WITH SY-SUBRC 'SWD_LINES'
000450 RAISING INTERNAL_DATABASE_ERROR.
000460 ENDIF.
000470
000480 *- commit
000490 IF DO_COMMIT NE ' '.
000500 COMMIT WORK.
000510 ENDIF.
000520
000530 ENDFUNCTION.
I tried searching sdn. But all other posts were related to passing entries from internal table to DB. Also I'm not even sure if i can raise a OSS, because a few minutes back the system was working fine and all of sudden this started happening.
So can you please guide me what I am missing and how can i fix this?
Thanks & Regards,
RajHi Rick,
When I get acitvate the workflow, the workflow template is gettign active & saved and after that the system results into short dump. And also when i try creating a PR and test this workflow, in SWEL, i can see the below message in RFC status field.
The ABAP/4 Open SQL array insert results in duplicate database records..
I haven't done any duplicate binding. Also I checked what you suggested. Didn't work. Also checked my newly added code. But I'm not accessing database directly anywhere. All is done via SAP standard function module.
Even if i try to display this workflow in PFTC, the system is resulting in the same short dump.
What could be the reason?
Regards,
Raj
Edited by: Raj Karunanidhi on Feb 23, 2010 5:30 AM -
SPOOL_INTERNAL_ERROR short dump while running RBDAPP01
I recently encountered this run-time error when processing IDOCs.
The IDOC message type was WMMBXY, if that helps.
We have been using this message type and have been processing thousands of these transactions for years,
and this just suddenly happened. We got other IDOCs of the same message type to process successfully after
this error occurred, so I think it is some sort of data issue.
We were simply trying to process a simple PO Goods receipt (movement type 101), so this is nothing unique.
Has anyone else out there experienced this issue before?
I would appreciate any help you can give.
Thanks.
MikeHi Michael,
please check the SAP notes regarding SPOOL_INTERNAL_ERROR.
I have found 15 notes, for example the newest ones:
http://service.sap.com/sap/support/notes/1888199
http://service.sap.com/sap/support/notes/1953355
Regards,
Klaus
Maybe you are looking for
-
Removing photos/images from Photo Library (not camera roll) on the 3g iphon
Okay, So i have removed all photos from camera roll one by one......... Now for the photo library, i want remove all pics from that,some are photos i took, some are shots i saved off facebook etcc.... while on the iphone safari browser. but i have no
-
Role based oracle adf security and filtering data
while oracle adf security looks great its only role based... does anyone know of any resources describing an architecture where this is used in addition to filtering of data based on say, organization? it seems that oracle adf security is not really
-
Report S_ALR_87012357 not showing VAT amount for directly entered FI items
Hello experts, In our system, the VAT and sales amount are calculated in another system (not ERP) The VAT amount together with sales amount is transferred to FI via the standard iDoc ACC_DOCUMENT03 The problem that occur is that the report S_ALR_8701
-
Error compiling Illustrator CS6 plugin on Mac OS 10.10 (Yosemite)
Hi @all, if i try to compile a Illustrator (CS6) plugin on Mac OS 10.10 (Yosemite) and use the MacOS 10.5 SDK, I get the following error: /MySDKPath/Illustrator/cs6/illustratorapi/pica_sp/SPFiles.h:84:9: error: mac68k alignment pragma is not su
-
Why is the coating of iPhone 5 black phone comes off within sometime
coating of the black iphone 5 wears off. customer care as an exception replaced the phone. requested them to replace with the white iphone as black phone has an issue. after getting a replacepment the coating came off within 2 months of usage.