Dump with the following message "DYNPRO_SYNTAX_ERROR"
Hi All,
During the call of a Y table over the transaction SM30, the following dump was received "DYNPRO_SYNTAX_ERROR".
Details of the dump:
Runtime Error DYNPRO_SYNTAX_ERROR
Occurred on 25.11.2009 at 05:09:09
Syntax error in a screen
What happened?
While generating a screen, the system discovered that it contained a
syntax error, or that it could not be generated for some other reason.
While generating a screen, the system discovered that it contained a
syntax error.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Screen "SAPLYNCM_SM30" 0002 contains a syntax error.
Please help me out in how to rectify the same.
Thanks.
Hello,
Your table maintanance is sure in some kind of trouble. Am not sure how you were able to create the maintanance generator without assigning a function group. The dump could also be due to any recent changes not getting reflecting . It's better to delete and recreate the maintainance generator once again
Vikranth
Similar Messages
-
hello
I can not update creative cloud. Stuck at 2% with the following message: attempted connection to the server ...
I have a pc
pls help merestart your computer and retry.
-
My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.
Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane -
Hi, whenever I open Dreamweaver CS5 I get this message:
Adobe Extension Manager loops with the following message:
“The Extension Manager will now launch and finish updating Dreamweaver”.
Then the manager starts and I have to wait and click a few buttons until I can close it.
How can I stop the Extension Manager popping up?
Thanks for advice.Seems to be a lot of this going on. Wondering if we're wasting our time with this??!!
-
when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
can't access my ipad, comes up with the following message on screen "Ipad not backed up. this ipad hasn't been backed up. Backups happen when this ipad is plugged in, locked and connected to wifi".
Try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons -
Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3
Go to > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/
-
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails. however when i try to update the software the process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.
Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.
-
I keep getting a pop-up window with the following message, even though I haven't got anything plugged in to any USB points. It comes up every few seconds, often multiple times at once. Can anyone advise why it is happening and how to get rif of it?
Reset your SMC.
Resetting the System Management Controller (SMC) - Support - Apple -
iCloud, when tries to sync with iCal reverts with the following message The server responded with “509” to operation CalDAVWriteEntityQueueableOperation. It would not sync my calendars. Any ideas how to fix it? Thanks.
Same issue here, hope someone has a clue how to solve this.
-
My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000. software for this device could not be launched. The drive is not connected or is busy." How do I regain connection?
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me -
Everytime I try to sync my Ipod touch I et the following message 'cannot be synced An unknown error occured (13019). Can anyone help
Try here:
iTunes: Error 13019 during sync
Maybe you are looking for
-
Recovery to Windows Vista problem for my Satellite A200-10X
My computer was working OK. To speed it up, I decided to reformat the hard disk using the recovery DVD provided by Toshiba. The recovery failed. I have tried many many ways but keep having the same problem i.e. the process goes into a loop. What happ
-
B2B EDI translation ----Is it possible to increase the sub-element length
B2B EDI translation ----Is it possible to increase the sub-element length?? Am new to the B2B 10g- EDI Integration environment. In our production setup, am getting the following error. B2B EDI Translation failed, because one of the fields was too lon
-
Removing checkbox from resultset.
Hi, I am using MDM resultset iview, In the result screen it is appending checkbox for every record. can any one help me on removing check box. Regards, Sandeep Reddy
-
System exec subvi. can't access block diagram for positionin​g
OK I am back! my first issue is that for some reason I can no longer attach files here for you all to see... Second and more to the point is how can I tell the system exec.vi to open where I want it too when access to the block diagram is password pr
-
Intel iMac/Canon printer problew
I have just upgraded from an old Grape iMac (which I had updated to OS X)to a new intel machine. I have a Canon Pixma printer which worked fine with the old iMac but with the new one it prints everything a quarter size, even when it shows it full siz