Dumping camera HD but not ready for edit

I'm just getting started with shooting video & FCE, storing storing files and all this jargon, so bear with me here. All of this is frighteningly overwhelming and I'm trying to get the "basics" understood.
I want to clear out my camcorder HD and save the files on my external HD for later editing (and general backup), as I'm not ready to jump into editing yet. I've read that the media must remain in its "original file structure", as FCE doesn't work with isolated .mts files. Can I save the video media directly to my external HD or must I use Log & Transfer through FCE? What would you do?
Also, should I connect my camera and external HD to the computer individually or connect the external HD to the computer and then the camera to the external HD?
Thanks for helping this newb!

Hi -
You are correct, you need to save the entire memory structure of the camera storage media in order to successfully use Log and Transfer on video that has been archived off the camera media and on to a hard drive.
Here is a workflow to do that, it looks harder than it is:
Plug the camera in via USB, the media appears as a drive on the desktop -
!http://www.spotsbeforeyoureyes.com/DMG1.jpg!
Then, in the Finder, go to the menu Go > Utilities-
!http://www.spotsbeforeyoureyes.com/DMG2.jpg!
When the Utilities window opens, double click on the Disk Utility.app to launch it -
!http://www.spotsbeforeyoureyes.com/DMG3.jpg!
Select the camera storage on the left hand pane, then click the +new image icon -
!http://www.spotsbeforeyoureyes.com/DMG4.jpg!
Leave the Image format and encryption to their default settings. Navigate where you want your archival disk copy to be placed, and give it a name (like the date, etc.) and click Save -
!http://www.spotsbeforeyoureyes.com/DMG5.jpg!
Disk Utility will do it's thing and make the disk image of everything on you camera storage (all files, folders, data - all intact and all exactly as it appeared on the camera storage media) in this case on an external drive -
!http://www.spotsbeforeyoureyes.com/DMG6.jpg!
Eject the camera from your computer -
!http://www.spotsbeforeyoureyes.com/DMG7.jpg!
Unplug your camera and double click on the disk image archive you just created on your drive. The camera media storage will reappear, mounting to your desktop, this time originating from the archive and not the camera.
BEFORE you reformat the camera media or erase the clips on the camera media (reformatting preferred), launch FCE and Log and Transfer, navigate to the archival disk image on your desktop and verify that all is well.
Hope this helps.
MtD

Similar Messages

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

I assume you have Photostream on, correct?
In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection. Both of these criteria must be met before the sync occurs.

Migo: field not ready for input

hello ,
i am stuck with an issue , which is ---
I have to add two fields in migo tablecontrol with dyndr- 200, for overdelivery tolerance and under delivery tolerance.
I am able to add them with my custom fields (ZZUEBTO,ZZUNTTO). and now fields are their in table control .
But now the issue , when i am initializing values to these fields using badi MB_MIGO_BADI ,and method LINE_MODIFY,
its showing warning that --
BAdI: Field GOITEM-ZZUEBTO not ready to accept input (Change will not be adopted)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZUEBTO have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
if any one , please revert me back .
Thanx,
Jeetendra Chauhan
Edited by: jeet.chauhan on Jun 2, 2011 7:58 AM

Hi
If I understand you, you are modifing the standard dynpro SAPLMIGO 0200 (ie: the table control TV_GOITEM). I suggest you to avoid it and mantain these fields in a new tab with this BADI and methods PBO_DETAIL and PAI_DETAIL.
Regards
Eduardo

PSE 10 will print from the organizer and in sharing mode, but not from full edit

I'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer. The print function works fine while in organizer and sharing mode, but not from full edit. When I try to print from full edit, I get an error message with a red "X" on it that says: "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer." I can't figure it out. The printer is in "ready" state, and works fine in the organizer mode, and in share. Any thoughts on what I'm missing? Thanks for any help in advance.

This occurs frequently with HP printers, though others are implicted as well from time to time
In Control panel>Devices and printers, right click your active printer, go to Printer Properties, and rename the printer to something short, e.g. my printer
http://kb2.adobe.com/cps/865/cpsid_86566.html

Load Matrix and ready for Editing

Hi,
How do I load a matrix and bind to a datasource and have multiples rows ready for editing?
I would usually bind the datasource follow by the columns but that doesn't make the rows editable.
Set oMatrix = oForm.Items.Item("1").Specific
Set oColumns = oMatrix.Columns
Set oDBDataSource = oForm.DataSources.DBDataSources.Add("@TableName")
Set oColumn = oColumns.Item("No")
oColumn.DataBind.SetBound True, "@TableName", "U_ItemNo"
oMatrix.Clear
Please note, I am using VB6. Help appreciated. Thanks.

Yes, certanly, you can simply add one more row when user presses Enter (or Sh-Enter).
Just add the next condition into your ItemEvent-handler:
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_KEY_DOWN)
     if
          pVal.ColUID == "Col1" &&
          pVal.Action_Success == false &&
          pVal.CharPressed == 13 &&
          pVal.Modifiers == SAPbouiCOM.BoModifiersEnum.mt_SHIFT // or mt_None
          tblItems.AddRow(-1, 0)

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

HP Officejet Pro L7590 &/or HP Slimline computer NOT ready for market

I purchased the Officejet last August and used in through December with a Dell with no problems whatsoever. When I bought an HP Slimline with Vista 64 the printer started spitting out a dozen pages with a few lines of garbage characters for each document including the Test Page, and did not completely print the documents. I spoke with three technicians who were all given remote access. We each spent about 3 hours per session. They were unable to make ANY progress in solving the problem. HP provided a VISTA 64 installation disk. It should not have done so. HP has taken no responsibility for releasing a product to market that is not ready for use but will not accept it back and will not give credit for the expensive paper weight that it has become. Moral of story: stick with Dell, don't buy anything from HP.

Thanks for visiting the HP Consumer Support Forums.
This
forum is for suggestions directly related to the forums. If you'd like
to leave feedback regarding issues not directly related to the forums,
please follow this link:
http://welcome.hp.com/country/us/en/contact_us.html
This
is a user-to-user community, and not a venue to receive directly help
or feedback from HP. If you have any further questions or concerns,
please feel free to send me a Private Message.
Thanks!
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Firefox beta 35 not ready for prime time.

I have spent the entire weekend trying to get the Firefox beta 35 to work. What I have found is that *all* extensions fail to work with the exception of Places Maintenance. I can not download any extension Firefox is so famous for. The error is something like "cannot install 'plugin-name' in it's current state." Enabling any extension require a FF restart, even Places Maintenance. Trying to remove an extension fails and must be done manually.
I am on Windows 7 Premium desktop Firefox, 32 bit. I "committed" myself to FF 35 last night (which meant clearing history and cache on exit because the extension "Expire History by Days" was no longer working), when I discovered that 35 was not playing nice with some sites using Flash. It was a capricious thing. Many sites worked as normal but some would not render at all. Examples:
http://www.wunderground.com/US/WI/La_Crosse.html
http://www.weather.com/weather/5day/l/Hustler+WI+54637:4:US
First time I have has a problem with a Firefox beta, but it is definitely not ready for prime time. I realize FF is attempting to get away from what we are calling "Proprietary add-ons" but FF 35 in its present state will just fill the Moz Support forums with millions of complaints (guess I am one of the first). I have at present 1 extension (the only one that works on 35), the above mentioned "Places Maintenance."
I thought you might like this report as "user input." God knows I have tried...I must have downloaded 35 at least a dozen times and then been forced back to 34.0.5. So I am back on 34.0.5
I have submitted a bug report here:
https://bugzilla.mozilla.org/show_bug.cgi?id=1108196
Let me know if anyone else is having these problems or anyone needs more information. I'd love to help fix this. I know some of you good support people have probably tried 35. Are you having the same difficulties?
Below is my (34.0.5 but the same as I had on 35 last night with the exception of "Version") trouble shooting information minus a million entries for my printer:
Application Basics
Name: Firefox
Version: 34.0.5
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:34.0) Gecko/20100101 Firefox/34.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Places Maintenance
Version: 1.3
Enabled: false
ID: [email protected]
Graphics
Adapter Description: NVIDIA GeForce 9400 GT
Adapter Drivers: nvd3dum nvwgf2um,nvwgf2um
Adapter RAM: 1024
ClearType Parameters: Gamma: 2200 Pixel Structure: B ClearType Level: 50 Enhanced Contrast: 300
Device ID: 0x0641
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 12-19-2013
Driver Version: 9.18.13.3221
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 304619da
Vendor ID: 0x10de
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA GeForce 9400 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.search.suggest.enabled: false
browser.search.useDBForOrder: true
browser.sessionstore.enabled: false
browser.sessionstore.max_tabs_undo: 0
browser.sessionstore.upgradeBackup.latestBuildID: 20141126041045
browser.startup.homepage: http://www.wcwcw.com/
browser.startup.homepage_override.buildID: 20141126041045
browser.startup.homepage_override.mstone: 34.0.5
browser.tabs.loadInBackground: false
browser.urlbar.autocomplete.enabled: false
dom.indexedDB.enabled: false
dom.mozApps.used: true
dom.w3c_touch_events.expose: false
extensions.lastAppVersion: 34.0.5
font.internaluseonly.changed: false
general.autoScroll: false
gfx.direct3d.last_used_feature_level_idx: 1
keyword.URL: https://www.google.com/search?q=
media.gmp-gmpopenh264.lastUpdate: 1413301734
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1417991594
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1418059778
places.history.expiration.transient_current_max_pages: 80511
plugin.disable_full_page_plugin_for_types: application/vnd.fdf,application/vnd.adobe.xdp+xml,application/vnd.adobe.xfdf,application/pdf
plugin.importedState: true
plugin.state.np32dsw: 1
plugin.state.npdeployjava: 0
plugin.state.npgoogleupdate: 0
plugin.state.nppdf: 2
plugin.state.npwatweb: 2
privacy.clearOnShutdown.cookies: false
privacy.clearOnShutdown.formdata: false
privacy.clearOnShutdown.offlineApps: true
privacy.clearOnShutdown.sessions: false
privacy.cpd.cache: false
privacy.cpd.cookies: false
privacy.cpd.offlineApps: true
privacy.cpd.sessions: false
privacy.popups.showBrowserMessage: false
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
privacy.sanitize.timeSpan: 0
security.disable_button.openCertManager: false
security.disable_button.openDeviceManager: false
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1415513129
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
---------------------

Just for the record I'm using Fx35b1 with lots of plug-ins and extensions with absolutely no problems now or for quite a long time.

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

Where is the "not ready for input" field stored in SAP?

Hi,
In the tcode CT04, the 'Additional Data' tab has a field called 'not ready for input'. I want to find this value in a table. I thought it was in CABN-ATINP but this does not seem to be populated all the time.
e.g.
1. characteristic ABCDE has the value checked in CT04 but there is no entry in CABN-ATINP
2. characteristic ZYXWV has the value checked in CT04 and there is an entry in CABN-ATINP
Does anyone know:
a) why?
b) how to find the value for point 1 above?
Thanks,
Kroc.

obviously, that is wrong.
It is true that the ATINP value for batches which have a reference field in CT04 does not ever change but having a reference field does not necessarily mean that it should be display mode.
Anyone know why the reference field stops the ATINP field update?
And how does the program know that it should be 'not ready for input' when the ATINP flag is not changed?
Thanks.

Drive not ready for use

when i go to update my ipod, i get this error: "the drive is not ready for use; it's door may be open. Please check drive\device\harddisk2\DR4 and make sure that a disk is inserted and that the driver door is closed." then it proceedes to freeze up itunes and then the computer. So when i get this, i have to format my ipod so that i will be able to put music on it again. then after 3 or 4 updates the same thing happens. but never right after i format it. anyone have this happen before or know why this would happen? it is an older ipod, with the click wheel. and it does have the most recent update.
Windows XP

Try changing the drive letter for your iPod.
If you don't know how to do it, I'll look around a bit and find an article to help
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

Dumping camera HD but not ready for edit

Similar Messages

Maybe you are looking for