Dumps in sap pi

Hi Gurus,
Can any body tell me that on what cases we will get Dumps in sap pi ,Can any body share me is there any documents related to dumps.
It is very help ful for me .
Thanks&Regards

Hi Madhu,
There is so much exceptions like stars in the sky. All the adapters can raise an exception if they are not right used or there is a communication/configuration problem, you can have mapping exceptions, there is a standard failures depending of your PI version, configuration PI problems, etc
IMO you can read the troubleshooting guides like:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8071b1b8-3c5c-2e10-e7af-8cadbc49d711?quicklink=index&…
(PI) 7.3.1 Troubleshooting Guide - Technology Troubleshooting Guide - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?overridelayout=t…
XI: Timeouts, timeouts, timeouts....
Regards.

Similar Messages

Short dump in SAP R/3: SQL statement buffer overflow?

Hello,
I hope someone can help us with the following problem:
A short dump in SAP R/3 (DBIF_RSQL_INVALID_RSQL, CX_SY_OPEN_SQL_DB)
occurred during a delta load, which worked fine for several month.
The custom code crashes at a FETCH NEXT CURSOR statement.
I assume, it might be a SQL statement buffer overflow in SAP R/3?
The problem can be reproduced by RSA3, and is therefore not time-dependent.
The problem did not occur before or on the quality assurance system.
Cursor code:
 Read all entries since last transfer (delta mechanism)
 OPEN CURSOR WITH HOLD s_cursor FOR
 SELECT * FROM ekko
 WHERE ebeln IN t_selopt_ekko.
t_selopt_ekko has up to 60.000 data sets, which worked fine in the past.
It is very likely that the amount of data during the first crash did not exceed this.
SQL-Trace of RSA3 call:
It seems that 25150 data set can be processed via fetch before the short dump occurs
After that object SNAP is written:
"...DBIF_RSQL_INVALID_RSQL...dynpen00 + 0xab0 at dymain.c:1645 dw.sapP82_D82
Thdyn...Report für den Extraktoraufruf...I_T_FIELDS...Table IT_43[16x60]TH058FUNCTION=
RSA3_GET_DATA_SIMPLEDATA=S_S_IF_SIMPLE-T_FIELDSTH100...shmRefCount = 1...
...> 1st level extension part <...isUsed = 1...isCtfyAble = 1...> Shareable Table Header Data
<...tabi = Not allo......S_CURSORL...SAPLRSA3...LRSA3U06...SAPLRSA3...
During dump creation the following occurs:
"...SAPLSPIAGENTCW...CX_DYNAMIC_CHECK=...CRSFH...BALMSGHNDL...
DBIF_RSQL_INVALID_RSQL...DBIF_RSQL_INVALID_RSQL...DB_ERR_RSQL_00013...
INCL_ABAP_ERROR...DBIF_INCL_INTERNAL_ERROR...INCL_INTERNAL_ERROR...
GENERAL_EXC_WITHOUT_RAISING...INCL_SEND_TO_ABAP...INCL_SEARCH_HINTS...
INCL_SEND_TO_SAP...GENERAL_EXC_WITHOUT_RAISING...GENERAL_ENVIRONMENT...
GENERAL_TRANSACTION...GENERAL_INFO...GENERAL_INFO_INTERNAL...
DBIF_INCL_INTERNAL_CALL_CODE..."
Basis says, that the Oracle data base works fine. The problem seems to be a SAP R/3 buffer.
Does anyone had a similar problem or knows where such a buffer might be or how it can be enlarged?
Best regards
Thomas
P.S.
Found a thread that contains part of the dump message "dynpen00 + 0xab0 at dymain.c:1645":
Thread: dump giving by std prg contains -> seems not to be helpful
Found a similar thread:
Thread: Short dump in RSA3 --Z Data Source -> table space or somting else?
Edited by: Thomas Köpp on Apr 1, 2009 11:39 AM

Hi Thomas,
 Its due to different field length.
Just check it out in code after FETCH NEXT CURSOR what internal table you have mention.
that internal table shoul deffined by taking refrence of ekko, because your code is
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT * FROM ekko
WHERE ebeln IN t_selopt_ekko.
hope you got solution.
Regards,

Dump in SAP after installing patch for Doculink of Opentext ECM

Hi,
We have installed Add-on of Doculink for Opentext ECM on ECC6.0 System. We have installed (new version 9.6.2) it from Open-Text (3rd party vendor).
01) Open Text DocuLink for Livelink Enterprises
02) DocuLink for Livelink Enterprise Server
03) Open Text Archiving and Document Access
04) Open Text Archiving and Document Access for SAP Basis
After transporting the patch DC3.1-001(instruction of patch) which we found from open text site of https://esc.ixos.com/ we are getting dumps in SAP that: Program is not Unicode-compatible.
Error analysis
The following syntax error was found in the program /IXOS/SAPLDC_C:
The program /IXOS/SAPLDC_C is not Unicode-compatible, according to its program attributes.
Can any one tell me how can this transport be reverted back from Open-Text 9.6.2 ?
Thanks & Regards,
Nikhilesh Ray

is not Unicode-compatible
Have you tried to disable the unicode check?, It might work.... In anycase I think you should give IXOS a call, I presume they have seen this issue quite a few times :-D
Regards
Juan

Open PO / SA Dump in SAP 4.7

Hi All,
Please suggest which is the best way to take open PO dump. open Pos are to be converted in to new POs with new material master. which is the best option pls let me know. 4.7 sap
ME2M - WE101 - alv grid OR can we take dump form any tables ?

closed

Short Dump in SAP BW Sys while extracting data from R/3

HI All,
I am getting short dump problem in sap bw while extracting the data from r/3 to bw info cube.
the error message is like this,
Runtime Error          DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          11.05.2011 09:36:51
ShrtText
An SQL error occurred when accessing a table.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000115000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GPCX2UNC5JG556R7DPSFJUGJS1Z" or "GPCX2UNC5JG556R7DPSFJUGJS1Z"
|    "INSERT_ODS"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "bwdev"
Network address.......... "10.10.100.36"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "8x AMD64 Level"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "BWDEV"
Database type............ "ORACLE"
Database name............ "BWD"
Database owner........... "SAPR3"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Aug 17 2008 20:56:58"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "OCI_10201_SHARE "
Patch level.............. "247"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
Memory usage.............
Roll..................... 16128
EM....................... 6265200
Heap..................... 0
Page..................... 0
MM Used.................. 5972296
MM Free.................. 289384
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "GPCX2UNC5JG556R7DPSFJUGJS1Z" in
"INSERT_ODS".
The main program was "SAPMSSY1 ".
The termination occurred in line 41 of the source code of the (Include)
program "GPCX2UNC5JG556R7DPSFJUGJS1Z"
of the source code of program "GPCX2UNC5JG556R7DPSFJUGJS1Z" (when calling the
editor 410).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "GPCX2UNC5JG556R7DPSFJUGJS1Z ". Its source code
starts in line 21
|    of the (Include) program "GPCX2UNC5JG556R7DPSFJUGJS1Z ".

Hi,
This error occurs if you want to insert an entry in the table that does not match the value range of any partition. In such a case, you must compare the value of the entry with the definitions of the partitions to determine the cause of the error.
please run the following test/repair in transaction RSRV ,
RSRV -> All Elementary Test -> PSA Tables -> Consistency Between PSA Partitions and SAP Administration Information
-> include the PSA table
    /BIC/B0000115000
Check OSS note 339896 which explains the repair procedure.
Regards,
Lokesh

MIRO Dump in SAP 4.6C

Hi all,
I have a dump in MIRO Tcode in program LEINSF21, dump says TABLE_INVALID_INDEX..
The dump is happening when we have a PO created and GR and IV for a wrong vendor and then reverse all those and create for the new vendor and using the same Bill of Lading.
But when we use PO as reference the dump is not happening .
Already SAP notes 365960 is applied.
Do we need to apply some notes to rectify this ?? we are planning to open the system for SAP ?
Please guide me in this regard.
Thanks in advance .
Vivek K

These many notes are available
481467
459450
445772
490555
483982
490574
But would recommend to open the system for SAP rather applying the notes. They may suggest the relevant or new based on the situation.
Regds
Manohar

Dump in SAP query report

Dear All,
I have written some development in SAP Query report.
The main aim is to assign to own defined parameter par1 combination of version and object-partner (internal order with defined order type).
The text is following:
DATA: it_aufk like aufk
      occurs 10 with header line.
   DATA: p-auart like aufk-auart.
   select * from AUFK into table it_aufk
     where AUFNR = coep-parob1+2(12).
if sy-subrc = 0.
   if coep-versn = '000'.
    par1 = 1.
   elseif coep-versn = 'GR0'.
    par1 = 2.
endif.
endif.
if coep-versn = 0 and ( p-auart = 'V112' or p-auart = 'V114' ) .
    par1 = 1.
endif.
I have performed check and generated this info-set successfully.
Than I have generated program in queries - other function- generate program.
I execute report and get dump.
What did I miss?
With best regards,
Kamila.

Category               ABAP Programming Error
Runtime Errors         CONVT_NO_NUMBER
ABAP Program           AQICZCO=========QUE_KZHAKEN_01
Application Component Not Assigned
Date and Time          15.12.2011 16:18:35
Short text
     Unable to interpret "GR0" as a number.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "AQICZCO=========QUE_KZHAKEN_01" had to be termi
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     This exception cannot be caught in the context of the current statement.
     The reason for the exception is:
     The program attempted to interpret the value "GR0" as a number, but
     since the value contravenes the rules for correct number formats,
     this was not possible.
How to correct the error
    Whole numbers are represented in ABAP as a sequence of numbers, possibl
     with an algebraic sign.
    The following are the possibilities for the representation of floating
    point numbers:
      [algebraic sign][mantissa]E[algebraic sign][exponent]
      [algebraic sign][whole number part].[fraction part]
    For example, -12E+34, +12E-34, 12E34, 12.34
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CONVT_NO_NUMBER" " "
    "AQICZCO=========QUE_KZHAKEN_01" or "AQICZCO=========QUE_KZHAKEN_01"
    "START-OF-SELECTION"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.

GETWA_NOT_ASSIGNED dump in sap

Hi experts,
I have a problem with ALV list.
The case is like below.
I added a new field that length is 6 with CHAR type.It was okay. There was no problem with just adding a field.
I added thefield with the attribute "EDIT = 'X'".In this case, the GETWA_NOT_ASSIGNED dmp occurs.
Everything is the same execpt EDIT attribute.
I need to set the field as editable so is there any solutions for this case?
Thanks.

Hi,
The code is like below.
DATA ls_fcat TYPE lvc_s_fcat .
        ls_fcat-fieldname = 'CNTMONT'.
      ls_fcat-reptext   = 'Aggregate Month'.
*      ls_fcat-edit      = 'X'.
      ls_fcat-outputlen = 6.
      APPEND ls_fcat TO gt_lvc_fcat.
   *** ALV DISPLAY
CALL METHOD lcl_grid->set_table_for_first_display
    EXPORTING
      is_layout            = gs_lvc_layo
      it_toolbar_excluding = gt_ui_functions
      i_save               = 'A'
      i_default            = 'X'
      is_variant           = gs_variant
*      IS_VARIANT           = GS_VARIANT
    CHANGING
      it_sort              = gt_sort[]
      it_outtab            = gt_disp[]
      it_fieldcatalog      = gt_lvc_fcat[].
Thank you.

BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD.

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Interface b/w SAP and NON SAP system

Hi GEMS,
Please give me some suggestion .My requirement is i have to transfer data from sap system to non sap system.
There is no middleware between these systems.The data will be in the xml format.
Please help me regarding these how can we link these systems and transfer data
Best Regards,
Phani

Please let us us know the platform of the non-sap system such as JAVA/.Net. It's can be done using PI/XI.
As per my experience, I've worked with only SAP JCO and .NET connectors. These connectors can be downloaded from service marketplace and needs to be installed on the non SAP platform. The Data transfer can be done through RFCs, which will be called from the non-sap systems.
Also, the data needs to be in XML format. XML transformations can be created using transaction XSLT_TOOL to convert the ABAP data to XML and viceversa. The generated XML string can be passed to non SAP system through RFC from SAP.
If the process is not synchronous, another option can be dumping the SAP data to FTP, which will be used by the non-sap system whenever required.

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
 Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
 Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
 Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
 Last error logged in SAP kernel
 Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
 2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
 follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
pls, award points

Short Dump:DBIF_RSQL_SQL_ERROR; Exception :CX_SY_OPEN_SQL_DB

Hi All,
I am getting the below short when i try to load the data into BI system. when I start the Info Package, it is immediately going to this short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          15.12.2011 02:43:18
Short text
SQL error in the database when accessing a table.
Please find the short dump details below.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          15.12.2011 02:43:18
Short text
     SQL error in the database when accessing a table.
Missing RAISING Clause in Interface
     Program                                 SAPLBTCH
     Include                                 LBTCHFXX
     Row                                     1.525
     Module type                             (FORM)
     Module Name                             STORE_NEW_STEPLIST_IN_DB
Trigger Location of Exception
     Program                                 SAPLBTCH
     Include                                 LBTCHFXX
     Row                                     1.652
     Module type                             (FORM)
     Module Name                             STORE_NEW_STEPLIST_IN_DB
Source Code Extract
Line SourceCde
1622              ID 'DATA' FIELD jobinfo_egj.
1623
1624           rc = 1.
    EXIT.
ELSE.
    db_steplist-priparkey = tmp_key.
ENDIF.
ENDIF.
SEIF new_steplist-typ = btc_xcmd." Step executes external command
db_steplist-extcmd = new_steplist-program.
db_steplist-xpgparams = new_steplist-parameter.
db_steplist-xpgflag = 'X'.
SE. " Step führt ein externes Programm aus
db_steplist-xpgprog   = new_steplist-program.
db_steplist-xpgparams = new_steplist-parameter.
db_steplist-xpgflag   = 'X'.
DIF.
steplist-sdldate = newjob_head-sdldate.
steplist-sdltime = newjob_head-sdltime.
steplist-sdluname = newjob_head-sdluname.
PEND db_steplist.
ep_count = step_count + 1.
OOP.
liste in DB speichern
RT tbtcp FROM TABLE db_steplist ACCEPTING DUPLICATE KEYS."n952782
y-subrc NE 0.
dialog EQ btc_yes.
MESSAGE s120 WITH new_job_head-jobname.
ENDIF.
CONCATENATE new_job_head-jobname new_job_head-jobcount INTO
jobinfo_egj SEPARATED BY '/'.
CALL 'C_WRITE_SYSLOG_ENTRY' ID 'TYP' FIELD ' '
        ID 'KEY' FIELD tbtcp_insert_db_error
        ID 'DATA' FIELD jobinfo_egj.
rc = 1.
EXIT.
ENDIF.
rc = 0.
DFORM.                               " STORE_NEW_STEPLIST_IN_DB
I would like to know where exactly it is getting error. Please help me on this.
Regards,
Venkat.

Hi,
Check following
See the OSS Notes:
Note 1379839 - RuntimeError DBIF_RSQL_SQL_ERROR Exception CX_SY_OPEN_SQL_DB
Note 917927 - Status of transactional requests
Note 863054 - Correction: Missing packages not in the tree
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
There are many threads also on this.
Go through them
Runtime Errors DBIF_RSQL_SQL_ERROR & Exception: CX_SY_OPEN_SQL_DB
Short Dump in SAP BW Sys while extracting data from R/3
Thanks and regards

Message type 'X' dump in BAPI_CATIMESHEETMGR_INSERT

Hi All,
Requirement: Transfer data from a Z table to CATSDB using BAPI_CATIMESHEETMGR_INSERT.
Issue: In case there is an erroneous data combination of data or data mismatching with the datatype of field in CATSDB , BAPI_CATIMESHEETMGR_INSERT goes to dump.
SAP : 6.20.
I tried searching notes but have not got any for 6.20 release.
Is there any way I can handle this programatically (exception handling etc.)
My design: I have made a custom method which calls this BAPI to update CATSDB.
Thanks,
Regards,
Kumud Singh

Hi Rajesh,
I found out that CATS was dumping because the data provided was erroneous. I found this dump at the initial stages of development. If you pass the right combination of data, you would not face this issue. Moreover, it is easy to debug and find that exact place which causes the dump.
On the other side, I also realize that it should not dump rather throw some error message. There are no SAP notes that I could find to resolve this issue. You could also do a search on available SAP notes.
Thanks.
Regards,
Kumud

Sender RFC adapter - Tight coupling to an SAP client

Hi ,
We are using a sender RFC adapter to receive a RFC request from SAP , process the request in XI and then send back a response to SAP.
Our requirement is that , this request may come from different SAP clients(client 100, 130 , 200 etc). Looks like RFC adapter configured under a Business System in XI cannot listen to calls from multiple clients and works for only one client. We get dumps in SAP when invoking this RFC from other clients.
Also i hear that the same program id cannot be used in two different RFC sender adapters, meaning i have to create a different RFC destination , create a different program id for each client in SAP.
Is there a way around for this issue ?
Thanks
Saravana

Hi Saravana,
you may try a little workaround:
configure your rfc adapter only with client 100
and try invoking RFC from clients: 130 , 200
on the client 100 first (with a dummy RFC on client 100)
and then from this dummy RFC on client 100 you can start your standard RFC with your rfc adapter
don't know any other way:)
Regards,
michal

Dumps in sap pi

Similar Messages

Maybe you are looking for