Dumps when trying to Maintain master data
Hi All,
When we are trying to Maintain master data for a master data object 0WBS_ELEMT, we are getting a short dump "CALL_FUNCTION_NOT_FOUND" in our BI 7.0 system.
What we are doing is Right click on 0WBS_ELEMT info object and Maintain master data, then we get the above dump. Saw in one of the forums that by making the info object in active and activating it again it will solve the issue but even after doing this the issue still persists, we still get the dump. Would need help from all of you.
regards,
Suman Pitta
Hi Suman,
The dump is due to the fact that 0WBS_ELEMT has an attribute which still
uses the POSID conversion exit. Attribute 0PROG_POS should use
conversion exit POSBW. And in fact, in RSD1 of this infoobject, POSID is
Still maintained. However, if you go to the DDIC object in SE11
(SE11 -> choose "Domain" -> /BI0/OPROG_POS -> Display), you will
see that the conversion routine POSID still appears. This is the reason
you get the dump.
In order to resolve this issue, go to RSD1 -> enter infoobject
'0PROG_POS' -> choose maintain -> Set object status to inactive and
reactivate the InfoObject. The reactivation should regenerate the DDIC
objects (you can check this in SE11 again).
Alternatively change to the version from content which utilises POSBW
already.
regards,
Colin
Similar Messages
-
GETWA_NOT_ASSIGNED short dump when load business partner master data
Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose -
Load is failing when trying to load Master data
HI When i am trying to load Master data, i am getting the below message for all the records, can some one let me know what am i doing wrong in here.
Below is the message i am able to see in PSA.
InfoObject /BIC/ZCONTPSTC does not contain alpa-Conforming value 80222 RSAR 196
Thank You,
Kris.From
Re: Alpha Conversion Problem
"- go to transfer rule (info source)
- check the flag for optional Alpha conversion (you should it on the left-hand side, at the very end "conversion")
you will see the data will be loaded with any trouble afterwards, because the system will do the conversion for you "
OSS note 598691 describes this behavior. -
Error When trying to load master data 0material
Hi,
I got the following error when trying to laod 0MATERIAL master data
"value '000000000004343434 ' for characteristic 0MATERIAL is in external format "
"0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
Can anybody help me in resolving this issue.
RegardsHi,
Run transaction OMSL.
Create an entry for MATCONV in the overview screen.
Double click on this line and set the length parameter for MATCONV.
the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
Hope this helps
Provide points if it does.
Regards
Lalan -
Issue when maintain master data in BW 740
Hi guy ,
When I want to maintain master data by right clicking info object in DEV system, It pop an IE application ,
http://bwqas.baicmotor.com:8000/sap/bc/webdynpro/sap/rsdmdm_md_maintenance_app?IOBJNM=ZFIIC005&sap-language=EN
It want me to login QAS system.I check my host configuration parameters ,i think it's no problem.Hi
Please check this
From BW 7.40 SP5 Master data maintenance is moved from SAP GUI to WEBDynpro application. When I was trying to do the same it gives below error. I think It requires some settings to configure web services in BD7. Please check and activate the same. Please find the relevant links and SAP Notes which might help you.
http://wiki.scn.sap.com/wiki/display/BI/BW+7.4+Master+data+Maintenance+via+WebDynpro
Note: 1997402
Note: 1969105
Note: 1088717
Thanks
Ajay Daggubati -
0vendor is not displaying name attribute when I maintained master data.
0vendor is not displaying name attribute when I maintained master data.
Details: I have four records in the 0vendor infoobject (sand box). I have to show these four records to the client. As i have free hands I maintained master data in the name field and finally activated master data. But when I add the name attribute to the vendor charecteristic in the query designer; it is displaying name attribute as # . Any idea how to display the names of the four vendors in the zquery.
Also do you know the transaction to copy standard query to Zquery?
Thanks in advance.Dear Les
For 0VENDOR, Set Property as Key & Text, try once again.
Yes, you can copy the standard query very well.
Open the Standard query & using SAVE AS, you can copy to "Z" queries.
Hope, now you will get some idea
Regards
Saravanan.ar -
Why cant I see an attribute when I "maintain master data"
Gurus -
Here is an easy question for you.
I added a new navigational attribute to an InfoOject. After I have loaded the data and activated it, I can't see the navigational attribute/values when I do a "maintain master data" when I display it via InfoObject. But, I can see the navigational attribute/values when I do a "maintain master data" when I display it via InfoSource. What do I have to do to see it when maintaining master data via the InfoObject option?
Thanks!usually in maintain master data - it might be that the number of fields are too large and you are not able to see your field.... what you can do is to select a particular row with data and double click on it to see the data or go to options and user parameters and choose ALV grid display and it usually displays all the fields unless you are using a custom layout which does not have this characteristic included.
The easiest way to check out if the characteristic is available is to use the P table in SE16 and view the contents - this too if you do not have custom layout defined at the ALV grid level... -
Hello Gurus,
Someone could help me?
In SAP BW 7.4 (Support Package 7) the BW master data maintain function moved from SAP GUI into web dynpro screen.
Can we use it (maintain master data) in SAP GUI RSA1 like SAP BW 7.3?
Is it a configuration in SPRO?
Thank you guys.
PS: It is my first project with SAP BW 7.4Hi Gareth,
I have made the code changes as suggested by you but there is some kind of inconsistency.
After maintaining master data ,If I go back one step it works fine
But if I type /nRSA1 or any other tcode on the same screen,it gives a dump.
Below is the dump.
Short Text
The current application has triggered a termination with a short dump.
What happened?
The current application program has detected a situation that should
not occur. A termination with short dump has therefore been triggered
by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of the error message:
ControlFrameWork: Maximum number of sessions reached
Long text of the error message:
Technical information about the message:
Message class....... CNDP
Number.............. 011
Variable 1..........
Variable 2..........
Variable 3..........
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occurs in a non-modfied SAP program, you might be able to
find a solution in the SAP Notes system. If you have access to the SAP
Notes system, check there first using the following keywords:
"MESSAGE_TYPE_X"
"SAPLOLEA" bzw. LOLEAU02
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the following
information to SAP:
1. This description of the problem (short dump)
To do this, choose System -> List -> Save -> Local File (unconverted)
on the screen you are in now.
2. A suitable system log
To do this, call the system log in transaction SM21. Restrict the time
interval to ten minutes before the short dump and five minutes after
it. In the display, choose System -> List -> Save -> Local File
(unconverted).
3. If these are programs of your own, or modified SAP programs: Source
code of these programs
To do this, choose More Utilities -> Upload/Download -> Download in
the Editor.
4. Details regarding the conditions under which the error occurred or
which actions and input caused the error.
System environment
SAP Release..... 740
SAP Basis level 0009
Application server... saps009
Network address...... 137.33.22.24
Operating system... Windows NT
Release.............. 6.0
Hardware type....... 4x AMD64 Level
Character length..... 16 Bits
Pointer length........ 64 Bits
Work process number... 11
Shortdump setting. full
Database server... SAPS009
Database type..... MSSQL
Database name..... BID
Database user ID bid
Terminal.......... GDNL2180
Character set C
SAP kernel....... 742
Created on....... Jan 30 2015 22:06:39
Created at....... NT 6.1 7601 x86 MS VC++ 16.00
Database version SQL_Server_9.00
Patch level....... 37
Patch text.......
Database............. MSSQL 9.00.2047 or higher
SAP database version. 742
Operating system... Windows NT 6.0, Windows NT 6.1, Windows NT 6.2, Windows NT
6.3
Memory consumption
Roll.... 0
EM...... 45930944
Heap.... 0
Page.... 40960
MM used. 29493280
MM free. 16431408
User and Transaction
Client................. 100
User.................. GDNJAINI
Language key.......... E
Transaction......... RSA1
Transaction ID...... EECAFAE4F51BF1F6B2DD005056950066
EPP whole context ID...... 0050569500661EE4BED95AD6937632DD
EPP connection ID........ DFCAFAE4BC6CF115B2DD005056950066
EPP call counter......... 1
Program.............. SAPLOLEA
Screen.............. SAPLRSAWBN_MAIN 1000
Screen line.......... 0
Active debugger..... "none"
RFC Caller Information
Information on caller of Remote Function Call (RFC):
System.............. BID
Installation number 0020244352
Database Release..... 740
Kernel Release...... 742
Connection type..... 3 (2=R/2, 3=ABAP-System, E=External,
R=Reg.External) call type....... synchronous and non-transactional (emode 0,
imode 0)
Inbound TID..........
Inbound queue name...
Outbound TID.........
Outbound queue name..
Client................. 100
User.................. GDNJAINI
Transaction......... RSA1
Call program...........CL_RSDMD_RSAWBN_TOOL==========CP
Function module..... RSNDI_MD_ATTR_TEXTS_MAINTAIN
Call destination..... NONE
Source server...... saps009_BID_00
Source IP address.. 137.33.22.24
Additional information on RFC logon:
Trusted relationship..
Logon return code.... 0
Trusted return code.. 0
Remarks:
In Releases prior to 4.0, information about the RFC caller might be
missing or incomplete.
- The installation number is provided in caller Release 700 and higher.
rmation on where terminated
The termination occurred in ABAP program "SAPLOLEA", in "AC_SYSTEM_FLUSH". The
main program
was "RSAWBN_START".
In the source code, the termination point is in line 38 of (Include)
program "LOLEAU02".
Line SourceCde
8 *" CNTL_ERROR
9 *"----------------------------------------------------------------------
10 data: sysubrc like sy-subrc.
11
12 CALL FUNCTION 'AC_FLUSH_CALL'
13 EXPORTING
14 SYSTEM_FLUSH = 'X'
15 CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
16 IMPORTING
17 MESSAGE_NR = sysubrc
18 MESSAGE_TEXT = SY-MSGLI.
19
20 sy-subrc = sysubrc.
21
22 CASE SY-SUBRC.
23 WHEN 0.
24 WHEN 1.
25 * system_error
26 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
27 WHEN 2.
28 * method_call_error
29 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
30 WHEN 3.
31 * property_set_error
32 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
33 WHEN 4.
34 * property_get_error
35 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
36 WHEN 8.
37 * maximal number of modi reached
>>>>> MESSAGE ID 'CNDP' TYPE 'X' NUMBER 011 RAISING CNTL_SYSTEM_ERROR.
39 WHEN OTHERS.
40 RAISE CNTL_ERROR.
41 ENDCASE.
42
43 ENDFUNCTION.
Thanks -
Dump when trying to create FI-SL planning layout
I get a dump when trying to create an FI-SL plannign layout. See details below.
Runtime Errors MESSAGE_TYPE_X
Date and Time 27.07.2010 13:02:45
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Combination ledger-version not allowed
Long text of error message:
Technical information about the message:
Message class....... "GLPL"
Number.............. 710
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLKPP_FISL
Include LKPP_FISLU08
Row 69
Module type (FUNCTION)
Module Name G_PP_DIMENSIONS_FILL
ce Code Extract
SourceCde
9 ************************************************************************
0 * T8PL01 : fill dimensions
1 ************************************************************************
2 *
3 REFRESH: itkpp0d.
4 CLEAR : itkpp0d.
5 *
6 SELECT * FROM t8pl01
7 WHERE
8 appl = appl AND
9 subclass = subclass AND
0 tabname = tabname.
1 MOVE-CORRESPONDING t8pl01 TO itkpp0d.
2 MOVE t8pl01-hierlevel TO itkpp0d-level.
3 IF NOT t8pl01-fieldname = 'RACCT'.
4 t8pl01-dinit = 'X'.
5 ENDIF.
6 APPEND itkpp0d.
7 ENDSELECT.
8 EXPORT itkpp0d TO MEMORY ID 'ITKPP0D'.
9 *
0 * Check if WER
T-dimension is available in the present set of
1 * dimenions.
2 *
3 READ TABLE itkpp0d WITH KEY dim_werte. "Kein Binary Search
And so on and so fourth. Please what could the problem be?Hi,
You type wrong tcode name. The correct name is: GLPLINSTALL
Detail in Sapnote 757269.
Regards,
Thanh.
Edited by: Thanh Tu Van on Nov 8, 2010 5:27 AM -
Incorrect result between maintain master data and bex query, how can i fix?
Hi ALL,
i get some messages from the users there is incorrect result between SAP R/3 and Report on BW. i controlled the monitor and i saw there was a job for 0CUSTOMER_ATTRIBUTE that it finish correctly but the processing it was only in PSA, i started the full update immediately from PSA into Data Targets and is finished correctly. after when i control the content of the 0CUSTOMER (right click maintain master data) i get the correct attribute result that match the data in SAP R/3, but the problem is when i execute a query Bex on this master data it will not return the same attributes data.
Can SomeBody Help please
Bilalhi,
For any master data attributes loaded you will have to run "Attributes Change Run" for that.Execute for Master data 0CUSTOMER.
The same is avilable in rsa1->Tools(top menu)->apply hierarchy/attribute run.
hope it helps,
regards,
Parth. -
Dump when i exit Service master from PO
Guys,
I got a dump, when i display service master from PO and exit back to PO again. I hope there should be some Notes, but i couldnt find any. We are in 4.7 SP 33, let me know if you find any or suggestions pls.
Regards
TGBHi,
If we experience dump then we may look into the error details in ST22 and SM13.
Dump may be becaue of 1) data inconsistency ex:number range issue, 2) Any version changes happened 3)Any recent abap changes not incorporated like that,
Try to search the notes based on the error details and still you cant able to find out the issue then definitely need to locate with the help of abaper by debugging.
Regards,
BK -
Manually maintain master data: check referential integrity?
Dear Experts,
we want to maintain master data via transaction RSA1 oder RSDMD.
Is it possible to enforce referential integrity?
Example:
Infoobject A has attribute Infoobject B
Infoobject B has master data keys
101
103
When maintaining attributes in Infoobject A (with transaction RSDMD) only allow to maintain Infoobject B 101 or 103 but not 102.
Best regards
GregorHi Gregor,
That is because I think you have sected check inegrity box for any particular Object then.....the values which are coming are checked with masterdata table.......if the value are not existing in the masterdata then those records are not updated to the target..............
In your case 102 is not present in A
If still you want to laod then there is one setting
You have activated error handling in the BW scheduler (Tab page Update)
On the Update tab page in the BW scheduler, you have selected the option Always update data, even when no master data exists for the data.
hope it will help.
Regards,
Ganesh BOthe -
Field not visible in maintain master data option
Hello experts,
maturity_date field is mapped and active in transformations.
but when i want to see data for it.
field not available in "maintain master data" option or "display data" option.
regards,
kvyou can search in se11 /bic/pmaturity_date.
and also is attribute only is checked in general tab.
bhaskar -
I get Exit code 20 error message when trying to install Master Collection 5.5. Please assist.
Installation and launch log errors | CS5, CS5.5, CS6, CC -
https://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html -
DIM IDu0092s are polluted only when we load the Master data and SIDu0092s
DIM IDs are polluted only when we load the Master data and SIDs are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SIDs when we delete the transaction and master data.
a. True
b. FalseHi,
You can use the mapping section of the transformation file for this purpose. It should be something like:
*COL(5) + *Str(_) + *COL(1)
I am considering that the 5th column of your file is the property. The 1st column is the ID.
Please take a look at the below link for more information:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
Hope this helps.
Maybe you are looking for
-
Set parameter and call transaction
Hi. To use the call transaction with the skip first screen option we have to use the set parameter statement. Depending on the PID which the technical specs of the fields contain, it is possible to preset these values. My query is that if the screen
-
Palm Z22, Vista, AMD Phenom X4, Asus will not sync
I have a Palm Z22 and a computer with an AMD Phenom X4 CPU, an Asus motherboard, and Vista. Sync problems range from unrecognized device to no progress when HotSync tries to connect. I have worked with Palm techs and with Microsoft and tried every tr
-
Playing all shows in a podcast
I have read the directions for how to play all the songs in the podcast, but my iPod nano just wants to play hour 1, for example, of an episode. Is there something I'm doing wrong, or is there a setting that I haven't set, or is my iPod broken? Pleas
-
Protecting/Encrypting Report sto preserve IP?
Is there a way to password, secure, protect, or encrypt .RPT files so they cannot be changed and to preserve ones Intellectual Property in them (formulas, formatting, SQL queries, etc.)? Thanks
-
when i tried to open itunes i got the above. help