Dunnage to subcontracter
Hi
Our user has put a query that
Sub-contractor issue in shipping, does not enable them to send dunnage to the sub-contractor,
Can I request you to mention what this dunnage is, and what should I suggest the user to do pls u2026..
Thanks In Advance
hii
In BW cube does not have the field of Opening stock or closing stock as it works on the function module at the background.
U will get the closing stock in the query designer as the TOTSTOCk field name. Also u have the receipt & issue field there. So u can calculate the Opening Stock figure by using the Formulae & these available fields.
Thanks
Neha
Similar Messages
-
Report for Material at subcontract AND PO number
We are preparing for Inventory verification at subcontractors.
My boss believes it would be easier for the SC vendor if we could supply the PO number for which the material was shipped.
I haven't found such a report. Is there one?
If you know the tables and links, I can write a ABAP query
Thank you for any help that can be provided.
AltheaHi,
ME2O works fine if you want to track which subcontracting PO's are still open and what is the current stock at vendor.
ME2ON is another version of the same basic ME2O report.
Try also MBLB - Stocks at subcontractor.
As far as PO to 541 link is concerned, I do not think it is possible to find it unless there is some specific business process being followed which is supported by custom code.
The reason is that when you issue against 541, you are simply providing materials to vendor that the vendor needs.
There might be multiple open SC POs for same material/batch and there is no point in tracking against a particluar PO. Its the same material/batch the vendor receives.
When you post a PGR for a SC PO, then the stock from vendor premises is consumed by 543 and the track to your SC PO is maintained.
I tried maintaining EBELN as required in OMJJ for 541 but still no MSEG-EBELN is populated. Maybe I am missing something. -
Subcontract Opening and closing stock and program
Dear All,
Is there any standard program for subcontract stock for which i can give previous date range and get the stock on older date to older date for the vendor (example like in MB5B for inhouse stock)
also we need to insert this details in custom report program so can anybody have developed such program or any function module is available for this
Pl suggest
Regards,
Vimleshdear sir.
Tcode : S_P00_07000140 - inventory and raw material for special stock report.
in selection-field give the special stock indicator O. and give the selection Date : Date on which u and to see the stock at vendor.
and exective it will show the stock on date.
in selection-fields we have an option for vendor and material also.
regards
jrp -
Error while creating PO in operation subcontracting
I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error
Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR -
Error while posting GR for subcontracting process
Dear Friends,
while creating a GR for a subcontracting PO, I get the following error. please suggest what to do. i checked the configuration for the movement type and could not come up with the solution.
Fld selectn for mvmt type 543 / acct 7449990 differs for Vendor goods movement (014)
Message no. M7093
Diagnosis
Comparison of the field selection strings from movement type 543 and G/L account 7449990 has revealed that there is an incompatible field selection combination at one or more points.
Field for which the field selection is different: Vendor goods movement
Example
On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed.
System Response
You cannot post this transaction, unless you have changed the field selection adequately.
Procedure
Contact your system administrator.
Action to be taken by the system administrator
Check whether any postings resulting from this movement type are to be made to the G/L account determined automatically. If you find that the G/L account is not correct, check the automatic account determination in the Customizing system for valuation.
Proceed
If the G/L account is correct, use the report RM07CUFA to compare the field selection for the movement type with the field selection for the G/L account and change the incorrect settings or the field status group of the G/L account.
ProceedThe field is mandatory in acct 7449990 and hidden in movement type 543 or vice versa. To check the field status for that movement type, you can run the program RM07CUFA
Once you execute this program and found that the field is set to mandatory, then it should be mandatory for that movement type field status also.
Alternatively, Go to txn OMJJ, click on Movement Type and execute. There double click on "Field selection (Enjoy) and see whether the movement is maintained as Required Entry or Optional Entry.
Now go to FS00, input the G/L Account 7449990 and execute. There go to tab Create/bank/interest and chech whether you have maintained any value against "Field status group" and also you have checked the box for "Post automatically only".
This should be done in consultation with FI people only if the issue is in production client.
thanks
G. Lakshmipathi -
Error while releasing Billing document in Subcontract process
Hi All,
We are working on Subcontract process as explained below:
Company code X purchases the component A and sends it to Company code Y on Subcontract. Company codes X and Y belongs to one company using single operative chart of Accounts, Controlling area & operating concern. FI configuration has been maintained in OBYA by treating above company codes Inter company GLs. The component A is sent to company code Y as non value added item. Through 501 movement type, as the component is sent by Company code X.
Company code Y will add some components (like B,C and charges some expenses as service component D for preparing Finished good) and send this FG to Company code X. For this company code Y will raise a Sales order and followed by MRP run and Production order is created.
In VA02 of above Sales Order, while entering Item details, where the Settlement rule is asking for PA Transfer structure (in Account assignment tab of Item details) and giving the following error analysis:
Enter a PA transfer structure
Message no. KD 044
Diagnosis
A PA transfer structure is required for settlement to profitability analysis.
System Response
You cannot save this settlement rule.
Procedure
Enter a PA transfer structure. To do this, choose the "Parameters" function in the settlement rule. As part of customizing, you can also store a default value for the PA analysis structure, in the settlement profile. The system then uses this default value when you enter a settlement rule.
In addition to above, another issue has raised while releasing the Billing document after doing PGI. Accounting document is not getting generated and while releasing the Billing document (VF02) it is throwing an error as
Enter profitability segment as cost object for Revenue and COGS posting
Message no. ZC 001.
MM,PP,SD & FICO configuration settings maintained:
1. All required OBYC settings
2. All cost element and Cost element categories have been maintained
3. From MM side the system is generating FI & CO documents
4. Settlement profile in Production Order type is maintained (in KOT2). Allocation structure and PA transfer structure were maintained in (OK06, OK07 & KEI1). In PA transfer structure we have assigned the required Sources and Value fields and settlement cost elements.
5. In VKOA condition types KOFI and KOFK were maintained for relevant Customer & Material Account Assignment groups.
6. Required settings have maintained in OKB9.
Movement types 501 (sub contract), Received back to Company code X through Movement type 101. In spite of these settings still we are getting the above mentioned errors.
Could any one help to provide some inputs on the above issue as early as possible.
Thanks in advance.Hi,
check in the sales order line item procurement tab . u can get the requirement type. in SPRo check the requiremnt class for the requirement type. in that requirement clas u will get settrlemnt profile for the sales order. Check that settlemnt profile there u have to maintain the PA transfer structure.
I think both problem will get solved by maintaing the PA structure..
You are doing sales order costing right....and i hope it is non vsaluated sales order costing .....
If help ful please assign points.
cheers
Prabhat -
Subcontracting in scheduling agreement
Dear all,
while doing subcontracting scheduling agreement, how can we add the child components to the parent material.
in cs01 ,we maintained the bill of material for the parent material.in CS11 we are able to view it.
Regards,
veluHi,
If you have already maintained the BOM in CS01, you need not have to maintain the seperate BOM in Scheduling Agreement, because, the already existing BOM will get copied. The only thing you will have to do is that, define special procurement category as 30 (Sub-Contracting) in MRP2 view of the material master & then create the SchedulingAgreement with item category as L (Sub-Contracting).
Hope this clears.
Regards,
Prashant
- Pl. reward points if the answer is helpful to you -
Account determination error in Subcontract PO-MIGO.?
Hi all
While doing GR, i mgetting error i "Account determination for entry LDCA BSV 0001 ___ 5010 not possible".
The above PO is subcontract PO .
Thanks
sap-mHi,
For subcontracting..maintain these keys..so that you will not get any problem..
BSX, BSV, WRX, PRD, FRL
Regards,
Prasath -
Standard Cost Estimate for Subcontracting
Dear Sir / Madam,
We are in the process of migrating from our normal R/3 operations for Production Planning to Execution inclusive of Costing of materials by using iPPE functionality for repetitive scenario. We have our BOMs for painted body currently in R/3. The painted body falls under subcontracting scenario.
In this scenario the body in white produced from our bodyshop is sent out to the subcontractor along with certain paint items and is received as painted body and consumption of the body in white and the paint items sent needs to be shown during the goods receipt of painted body.
For this we have maintained the BOM for the painted body in iPPE. Also in the costing variant "ZD01" in order to arrive at Standard cost (CK11N) for the painted body we have maintained the following settings for Valuation variant for subcontracting :
Priority Strategy Sequence
1 Net Quotation Price
2 Effective Price from Purchase Order
While running CK11N for the material (painted body) we are receiving the following message
Message no. 28501 : Error in dependency processing: condition 0000062388 is empty
We wanted to verify whether the message raised is normal or would it have any adverse impact.
Your assistance would be highly appreciated.
Regards,
Bhavika
Edited by: Bhavika Goyal on Feb 7, 2009 12:20 PMDear All,
Control Key is important for inhouse producrtion and Sub Contract. Check it once and when ever u have given the Product (semi fisished) to Sub Contractor, along with Paint.
Here one thing is important what is your process? how much portionis involced in Sub contracting. why because
Paint issue to the sub con is captured by the way for migo or miro
Payment to sub contract is capture all the cost of the Sub Con., then is there any cost is missed for this process. Let me know the remain things?
thanqu
raj -
DEAR FRIENDS,
I am making a program for tracking the materials given (mb1b 541 movt.) for subcontracting and taken by me (101 for actual good receipt, 543 for the given material- stock type inward, 545 for the scrap returns). but while i made the program i am unable to pick up the materials BOM from the PO which is essential to take the difference between these and the supplied quantities taken-in by GR.
following is the program.
Please suggest the changes. Thanks,
Deepak
*& Report ZMM_SUBCONTRACTING_PO_REPORT
*& Author:
*& Date :
*& Reason: Sub Contracting PO Report.
*& Find Discreprancy in PO and BOM. according to 543 and 545
REPORT ZMM_SUBCONTRACTING_PO_REPORT NO STANDARD PAGE HEADING
LINE-SIZE 157.
*& TABLES DECLARATION
TABLES: EKKO,
EKPO,
EKBE,
ENT5303.
*& SELECTION-SCREEN.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_MATNR FOR EKPO-MATNR,
S_WERKS FOR EKBE-WERKS OBLIGATORY.
PARAMETERS: P_BUKRS LIKE EKKO-BUKRS OBLIGATORY.
SELECT-OPTIONS: S_BUDAT FOR EKBE-BUDAT OBLIGATORY,
S_EBELN FOR EKKO-EBELN,
S_BELNR FOR EKBE-BELNR,
S_GJAHR FOR EKBE-GJAHR.
SELECTION-SCREEN: END OF BLOCK B1.
*& INTERNAL TABLES DECLARATION.
DATA: BEGIN OF IT_EKKO OCCURS 0,
EBELN LIKE EKKO-EBELN,
END OF IT_EKKO.
DATA: BEGIN OF IT_EKBE OCCURS 0,
EBELN LIKE EKBE-EBELN,
EBELP LIKE EKBE-EBELP,
GJAHR LIKE EKBE-GJAHR,
BELNR LIKE EKBE-BELNR,
BUZEI LIKE EKBE-BUZEI,
BEWTP LIKE EKBE-BEWTP,
BWART LIKE EKBE-BWART,
BUDAT LIKE EKBE-BUDAT,
MENGE LIKE EKBE-MENGE,
DMBTR LIKE EKBE-DMBTR,
LFBNR LIKE EKBE-LFBNR,
MATNR LIKE EKBE-MATNR,
WERKS LIKE EKBE-WERKS,
BUKRS LIKE WB2_V_EKKO_EKPO2-BUKRS,
MENGE_I LIKE WB2_V_EKKO_EKPO2-MENGE_I,
LIFNR LIKE WB2_V_EKKO_EKPO2-LIFNR,
COUNT TYPE P DECIMALS 4,
BMENGE LIKE EKBE-MENGE,
MENGE101 LIKE EKBE-MENGE,
MENGE543 LIKE EKBE-MENGE,
MENGE545 LIKE EKBE-MENGE,
DIFFER LIKE EKBE-MENGE,
TMENGE LIKE EKBE-MENGE,
RATE LIKE EKBE-DMBTR,
NAME1 LIKE LFA1-NAME1,
LINE_COLOR(4),
END OF IT_EKBE.
DATA: WA LIKE IT_EKBE.
DATA: BEGIN OF IT_FINAL OCCURS 0.
INCLUDE STRUCTURE IT_EKBE.
DATA: END OF IT_FINAL.
DATA: BEGIN OF IT_FINAL_TEMP OCCURS 0.
INCLUDE STRUCTURE IT_EKBE.
DATA: END OF IT_FINAL_TEMP.
DATA: BEGIN OF IT_BOM OCCURS 0.
INCLUDE STRUCTURE CAPP_ITM.
DATA: END OF IT_BOM.
DATA: BEGIN OF IT_BOM_HEAD OCCURS 0.
INCLUDE STRUCTURE CAPP_BOM.
DATA: END OF IT_BOM_HEAD.
*& DATA DECLARATION.
DATA: COUNT TYPE P DECIMALS 4,
V_CNT TYPE P DECIMALS 4 VALUE '0.0001' ,
V_MENGE LIKE EKBE-MENGE,
V_DELETE.
TYPE-POOLS: slis.
DATA: l_date(12) TYPE c,
l_date1(12) TYPE c,
l_time(10) TYPE c,
l_list(60) TYPE c.
DATA: CATALOG TYPE SLIS_FIELDCAT_ALV, "FIELDCAT
TCATALOG TYPE SLIS_T_FIELDCAT_ALV, "IT FIELDCAT
EVENT TYPE SLIS_ALV_EVENT, "EVENT
TEVENT TYPE SLIS_T_EVENT, "IT EVENT
LAYOUT TYPE SLIS_LAYOUT_ALV, "LAYOUT
PG_TOP TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
PG_HEAD TYPE SLIS_T_LISTHEADER,
EXIT1 TYPE SLIS_EXIT_BY_USER,
VAR1 LIKE DISVARIANT,
VAR2 LIKE DISVARIANT.
*& START-OF-SELECTION.
START-OF-SELECTION.
PERFORM PROCESS_SELECTION.
PERFORM DELETE_CANCELLED_DOCUMENTS.
PERFORM EXPLODE_BOM_FOR_101.
SORT IT_FINAL BY COUNT.
PERFORM DISPLAY_OUTPUT.
FREE IT_FINAL_TEMP.
*& ALV FORMATTING
*& ALV DISPLAY
PERFORM GENERATE_ALV_FIELDCAT.
PERFORM EVENTS USING TEVENT.
PERFORM TEXT USING PG_HEAD.
PERFORM ALV_SHOW.
*& FORM PROCESS_SELECTION.
FORM PROCESS_SELECTION.
SELECT
A~EBELN
A~EBELP
A~GJAHR
A~BELNR
A~BUZEI
A~BEWTP
A~BWART
A~BUDAT
A~MENGE
A~DMBTR
A~LFBNR
A~MATNR
A~WERKS
B~BUKRS
B~MENGE_I
B~LIFNR
FROM
EKBE AS A
JOIN
WB2_V_EKKO_EKPO2 AS B
ON
AEBELN = BEBELN AND
AEBELP = BEBELP_I
INTO
CORRESPONDING FIELDS OF TABLE IT_EKBE
WHERE
A~MATNR IN S_MATNR AND
A~WERKS IN S_WERKS AND
A~BUDAT IN S_BUDAT AND
A~EBELN IN S_EBELN AND
A~BELNR IN S_BELNR AND
A~GJAHR IN S_GJAHR AND
A~VGABE IN ('1', '7') AND
A~BEWTP IN ('E', 'O') AND
( A~BWART IN ('101', '545', '543') OR
( ABWART = '102' AND ABEWTP = 'E' ) ) AND
B~BUKRS = P_BUKRS AND
B~BSTYP = 'F' AND
B~BSART = 'SUBC'."AND
B~LOEKZ <> 'X'.
SORT IT_EKBE BY EBELN EBELP GJAHR BELNR BUZEI.
ENDFORM.
*& FORM DELETE_CANCELLED_DOCUMENTS.
FORM DELETE_CANCELLED_DOCUMENTS.
DELETE IT_EKBE WHERE BWART = '102' AND BEWTP <> 'E'.
LOOP AT IT_EKBE WHERE BWART = '102'.
READ TABLE IT_EKBE INTO WA WITH KEY BELNR = IT_EKBE-LFBNR.
IF SY-SUBRC = 0.
DELETE IT_EKBE WHERE BELNR = WA-BELNR.
ENDIF.
ENDLOOP.
CLEAR WA.
DELETE IT_EKBE WHERE BWART = '102'.
ENDFORM.
*& FORM EXPLODE_BOM_FOR_101.
FORM EXPLODE_BOM_FOR_101.
CLEAR COUNT.
LOOP AT IT_EKBE WHERE BWART = '101' OR
BWART = '543'.
IF NOT IT_EKBE-MATNR IN S_MATNR.
V_DELETE = 'X'.
ELSE.
CLEAR V_DELETE.
ENDIF.
IF V_DELETE <> 'X'.
COUNT = COUNT + 1.
IT_EKBE-COUNT = COUNT.
V_MENGE = IT_EKBE-MENGE.
MODIFY IT_EKBE.
IT_FINAL = IT_EKBE.
APPEND IT_FINAL.
ENDIF.
call function 'CABM_READ_BOM'
exporting
I_MATNR = IT_EKBE-MATNR
I_WERKS = IT_EKBE-WERKS
I_STLAL = '01'
I_STLAN = '3'
I_DATUV = IT_EKBE-BUDAT
TABLES
EXP_BOM_DATA = IT_BOM_HEAD
EXP_ITM_DATA = IT_BOM
EXCEPTIONS
NO_RECORD_FOUND = 1
OTHERS = 2
if SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
*START RK 18.06.2007
DELETE IT_BOM WHERE DATUV > IT_EKBE-BUDAT.
END : 18.06.2007
IF V_DELETE = 'X'.
LOOP AT IT_BOM.
DELETE IT_EKBE WHERE MATNR = IT_BOM-IDNRK.
ENDLOOP.
REFRESH IT_BOM.
ELSE.
PERFORM CHECK_BOM_GR.
ENDIF.
endif.
ENDLOOP.
FREE IT_EKBE.
ENDFORM.
*& FORM CHECK_BOM_GR.
FORM CHECK_BOM_GR.
DATA: WACNT TYPE P DECIMALS 4.
WACNT = COUNT.
LOOP AT IT_BOM.
READ TABLE IT_EKBE INTO WA WITH KEY EBELN = IT_EKBE-EBELN
MATNR = IT_BOM-IDNRK.
IF SY-SUBRC = 0.
WACNT = WACNT + V_CNT.
WA-COUNT = WACNT.
WA-BMENGE = IT_BOM-MENGE.
WA-TMENGE = V_MENGE.
APPEND WA TO IT_FINAL.
DELETE IT_EKBE WHERE EBELN = WA-EBELN AND
EBELP = WA-EBELP AND
MATNR = WA-MATNR AND
BELNR = WA-BELNR AND
BUZEI = WA-BUZEI.
**START : ADDED BY .... KUMAR ON 14.06.2007
ELSE.
WACNT = WACNT + V_CNT.
WA-COUNT = WACNT.
WA-BMENGE = IT_BOM-MENGE.
WA-MATNR = IT_BOM-IDNRK.
WA-TMENGE = V_MENGE.
APPEND WA TO IT_FINAL.
**END ADDED BY .... KUMAR ON 14.06.2007
ENDIF.
CLEAR WA.
ENDLOOP.
REFRESH IT_BOM.
ENDFORM.
*& FORM DISPLAY_OUTPUT.
FORM DISPLAY_OUTPUT.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
IT_FINAL_TEMP[] = IT_FINAL[].
LOOP AT IT_FINAL.
CLEAR IT_FINAL-DMBTR.
********added by .... .... on 17.02.2007
if it_final-bmenge < 0.
IT_FINAL-DIFFER = IT_FINAL-TMENGE * IT_FINAL-BMENGE * -1.
else.
*********end by .... .... on 17.02.2007
IT_FINAL-DIFFER = IT_FINAL-TMENGE * IT_FINAL-BMENGE.
********added by .... .... on 17.02.2007
endif.
*********end by .... .... on 17.02.2007
IF IT_FINAL-BWART = '101'.
IT_FINAL-LINE_COLOR = 'C210'.
IT_FINAL-MENGE101 = IT_FINAL-MENGE.
IT_FINAL-DIFFER = 0.
LOOP AT IT_FINAL_TEMP WHERE BELNR = IT_FINAL-BELNR AND
EBELN = IT_FINAL-EBELN AND
EBELP = IT_FINAL-EBELP.
IF IT_FINAL_TEMP-BWART <> '545'.
IT_FINAL-DMBTR = IT_FINAL-DMBTR + IT_FINAL_TEMP-DMBTR.
ELSE.
IT_FINAL-DMBTR = IT_FINAL-DMBTR - IT_FINAL_TEMP-DMBTR.
ENDIF.
ENDLOOP.
IT_FINAL-RATE = IT_FINAL-DMBTR / IT_FINAL-MENGE101.
SELECT SINGLE
NAME1
INTO
IT_FINAL-NAME1
FROM
LFA1
WHERE
LIFNR = IT_FINAL-LIFNR.
IF SY-SUBRC <> 0.
CLEAR IT_FINAL-NAME1.
ENDIF.
ELSEIF IT_FINAL-BWART = '543'.
IT_FINAL-MENGE543 = IT_FINAL-MENGE.
IT_FINAL-LINE_COLOR = 'C200'.
IT_FINAL-DIFFER = IT_FINAL-DIFFER - IT_FINAL-MENGE543.
CLEAR: IT_FINAL-LIFNR,
IT_FINAL-EBELN,
IT_FINAL-BELNR,
IT_FINAL-MENGE_I,
IT_FINAL-BUDAT.
ELSEIF IT_FINAL-BWART = '545'.
******added by .... on 17.02.2007
IT_FINAL-MENGE = IT_FINAL-MENGE * -1.
IT_FINAL-MENGE = IT_FINAL-MENGE.
*******end by .... on 17.02.2007
IT_FINAL-MENGE545 = IT_FINAL-MENGE.
IT_FINAL-LINE_COLOR = 'C200'.
IT_FINAL-DIFFER = IT_FINAL-DIFFER - IT_FINAL-MENGE545.
CLEAR: IT_FINAL-LIFNR,
IT_FINAL-EBELN,
IT_FINAL-BELNR,
IT_FINAL-MENGE_I,
IT_FINAL-BUDAT.
ELSE.
IT_FINAL-LINE_COLOR = 'C200'.
CLEAR: IT_FINAL-LIFNR,
IT_FINAL-EBELN,
IT_FINAL-BELNR,
IT_FINAL-MENGE_I,
IT_FINAL-BUDAT.
ENDIF.
MODIFY IT_FINAL.
ENDLOOP.
ENDFORM.
*& Form GENERATE_ALV_FIELDCAT
text
FORM GENERATE_ALV_FIELDCAT.
DATA: POS TYPE I.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'COUNT'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'S. No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MATNR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Mat. No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'BMENGE'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'BOM Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'EBELN'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'PO No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE_I'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'PO Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'BELNR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Gr. No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
CATALOG-HOTSPOT = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'BUDAT'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'GR Date'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE101'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = '101 Gr Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE543'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = '543 Gr Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE545'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = '545 Gr Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'DIFFER'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Difference'.
CATALOG-NO_ZERO = ' '.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'LIFNR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Vendor'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'NAME1'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Vendor Name'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'RATE'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Rate'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'DMBTR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Value'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
ENDFORM.
*& Form ALV_SHOW
text
FORM ALV_SHOW.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-BOX_TABNAME = 'IT_FINAL'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = TCATALOG
IS_VARIANT = VAR1
I_SAVE = 'A'
IT_EVENTS = TEVENT[]
TABLES
T_OUTTAB = IT_FINAL.
ENDFORM . "ALV_SHOW
*& FORM USER_COMMAND.
FORM USER_COMMAND USING
R_UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
DATA: TABIX LIKE SY-TABIX,
WA LIKE IT_FINAL.
TABIX = SELFIELD-TABINDEX.
READ TABLE IT_FINAL INTO WA INDEX TABIX.
IF NOT WA-BELNR IS INITIAL.
set parameter id : 'MBN' FIELD WA-BELNR.
CALL TRANSACTION 'MB03' AND SKIP FIRST SCREEN .
ENDIF.
ENDFORM.Hi,
U can try this standard report for subcontracting:
J1IFR (Transaction name),
Not sure how much this will be useful to u.
regards,
Viji -
LTP Planning for Subcontracting Purchase Order
Hi All,
I am doing LTP run for the Finished Material.
Finished Material is having few open subcontracting Purchase order's.
When I take the LTP run in MS02, system is considering the Open PO's and adjusting (netting) it with the Planned independent requirements of finished material. This is ok.
But the planning is not creating depending procurement proposals for the child items.
It is subcontracting PO of finished material, system suppose to create the dependent requirements.
In the MRP run it is working fine in MD02. But not working in LTP planning run in MS02 Transaction.
Rgds / Shailendra
Edited by: Shailendra Hadkar on Apr 7, 2010 10:44 AMHi All,
I have found one BAdi u201CMD_CHANGE_MRP_DATAu201D for showing up Subcon requirements in MS04 for child materials.
This BADI "MD_CHANGE_MRP_DATA" requires to implement using method "CONSIDER_RESB".
But implementation of this BADI using method "CONSIDER_RESB" will open up Dependent requirements/reservations of phantoms in phantom assembly planning and other reservations also.
How I can implement this BADI for specific Subcon requirements or Specific MRP element??
Regards,
Shailendra
Please refer below post by Nethi Venkata R...
LTP Doubt -
Report for issuing componets to subcontracting materials
Hi
I am trynig to develop a report for issung components to subcontacrting maerial
as per our scenerio... every day we are creating purchase orders item cat L for subcontract material
then issue the materials against to subcon. pur.order...then do GR with 101..
as per our requirement...
report input entries..like 1. subcon material code
2. from date --- to --- todate
out put..for report..like.... total consumption of components with line item wise (as per bom) with that pertical period..
for this any std. report is there ?
or if go for zreport....pls guide to me..
any one can suggest to me
thanku
regards
sesidharHI,
Certain set of inforamtion can be availed in MB51 and using 541 Mvt type..
But it is better that you develop a zreport to get the information what you wanted if you are not satisfied with the MB51 report from standard SAP.
Try MBLB also
Thanks & Regards,
Kiran -
Scrap of material in subcontract and Excess material issue
Hi,
I want to know is there any setting such that , for mfg. a finish good material, some qty. of raw material is scrap the qty which is scrap i have add as negative qty in BOM and but after making the GR for Finish material , all positive qty. are consume by deduction of qty which i have mention as negative but scrap is not done automatically, i am doing scrap sepearetely so it is possible whenevr i make the GR for finish good material then , the material for which i have maiatain as negative should get automatically scrap, as the raw maetria are consum using 543 materials,
second thing the negative qty of material i have mention in BOM of finish good but insted of maiatining -ve qty in BOM is it possible to add the excess qty in PO as -Ve qty because when we select the finish material in Subcontract PO all BOM components appear in PO but there there is no option to add some addition material in PO.
can we make the above settings
regards,
zafarHi,
Thanks for your reply.
Just want to know one more think, as in subcontract we are issue the material as per BOm, as suppose, total qty of one raw material required is 4500, which is to be consume for making the finish good but due to std. packing of raw material i want to issue the qty 5000, but while making the GR only 4500 should be consume and the reamining 500 should be shown as in vendor stock after getting material back we will take that as 542 movement.
regards,
zafar -
PO number and material issued against this PO for subcontracting
How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya. -
Subcontract Purchase Order with delivery address from Sales Order Ship-to?
Hi
My client has a Sales order for a subcontracted product. The subcontractor should send the product directly to the customer that is on the sales order. Currently, the delivery address on the PO is the home address of the client.
My first option is to create a vendor address matching the ship-to and enter that manually in the Delivery Address field in the PO. But, i would like this to populate automatically. Is this possible?
thanks for your suggestions.
Oll>
Oll wrote:
> Hi
>
> My client has a Sales order for a subcontracted product. The subcontractor should send the product directly to the customer that is on the sales order. Currently, the delivery address on the PO is the home address of the client.
>
> My first option is to create a vendor address matching the ship-to and enter that manually in the Delivery Address field in the PO. But, i would like this to populate automatically. Is this possible?
>
> thanks for your suggestions.
>
> Oll
a mixture of third party order (vendor ships directly to customer) and subcontract is not possible. third party order would need a S as item category in the PO, while subcontract order needs a L at the very same field.
We created a storage location and a shipping point for the subcontractor. The sales order is created as a standard sales order that makes use of this storage location and shipping point.
MRP run then creates a request to produce that material, based on the special procurement indicator in material master it is known that the material is to be procured via subcontract order.
We then receive the finished good into this storage location that represents the subcontractor.
Then we create a delivery in VL01N to ship this material to the customer.
Maybe you are looking for
-
Multiple rows in a single but with different column names
Hello All, I have a table in which data is stored in the below displayed fashion. TRANS_ID Ty_1 NU_1 38960 BP 5215153159 38960 EM [email protected] 38960 FX 5115538033 38960 HP 4419965055 38960 For some weir
-
Can't remove PC-DOS from Windows 7 Boot menu after using PC-Doctor for DOS Bootable CD
I have a T60, Win 7 Pro I had some issues and tried the PC-Doctor for Dos bootable CD to run some diagnostics. Since then, upon bootup, I have a PC-DOS option in my boot menu that just won't go away. Using EasyBSD, the only os supposed to be in the b
-
Hello, I am trying to figure out if it would be possible to somehow automatically unmount my iPod after I log out of my user. I have created my user home directory on my iPod (for mobility) and so I would like to unmount the iPod so I can unplug the
-
I posted this in the G5 discussion also. Here's the situation. I now have a totally rebuild G5. I purchased two new G5s back in 2004. Everything worked fine until about 2 months ago. I started getting kernal panics on every start up on one of them. L
-
Can pages purchased for ipad be installed on imac snow leopard?
We purchased pages for our new ipad and were told at the store that we can also install this onto our imac once we upgraded to snow leopard, Mac OS X (10.6). Have made the update and now want to find out how to install pages onto it.