Dunning F150 - not checking minimum interest amount

Hello everybody,
I am facing the following issue: When running dunning F150, although I have configured the minimum amounts for interest - for each dunning level - the system is not using them.
The Dunning results i get  include items with interest lower the the limit set in customizing.
Has anyone seen this functionality working?
Thank you
Oana

Hi Oana,
Could you please check if the note is already applied in your  
system?                                                                               
526598  Account in dunning proposal despite minimum amount     
I hope this helps
BR
Renata

Similar Messages

  • F150 Dunning - Item not Dunned but Writes to MHND

    I am running F150 Dunning and the program is writing Invoices that have NOT been Dunned or OVERDUE to the table MHND. 
    Print all Items is NOT Checked for the Dunning Level and therefore does NOT show up on the Dunning List however it does appear on the Table MHND.
    Why is the transactionI F150 writing Invoices  NOT due to MHND.  Finally -  Note the Dunning Item is blank in the table as the item is NOT within the Arrears specified in Config.
    I am thinking it simply should NOT even exists on MHND after F150 execution.

    hi,
    please check your dunning notice settings.

  • Duplicate Invoice Check Not Checking the Gross Invoice Amount-

    Gurus,
    When checking for duplicate invoices in MIRO/FB60, I have made all the config and setup but still the system is not checking the gross Invoice amount field. Lets say I enter
    Invoice 1 :
                     Vendor                 X
                      Reference            123
                      Date                    10/27/2010
                      Company Code : 1111
                      Currency           : USD
                      AMOUNT           :100         and post this invoice
    I try to enter the second invoice
    Invoice 2: 
                       Vendor                 X
                      Reference            123
                      Date                    10/27/2010
                      Company Code : 1111
                      Currency           : USD
                      AMOUNT           : 90    
    I get the error message even though the AMOUNT in the second invoice is 90 which is not the same as first invoice .
    I chcked the vendor master duplicate check, made the config in spro-liv for duplicate invoice for company code, reference number and invoice date.
    The help says that after 4.6 version if all of them match, then the system wiill throw error, but in my case the amount is not matching and its still giving me an error.
    Kindly help..<< Moderator message - Please do not offer points >>
    << Moderator message - Everyone's problem is important >>
    Edited by: Rob Burbank on Oct 27, 2010 4:07 PM

    Hi,
    After making the duplcate invoices chek at spro will checks the reference number of the invoice entered previouslu with that one entered later for that company code.as the first check itself failed system throws the error thinking, you are trying to enter a duplicate invoice for a  already posted invoice though how much is the amount in the second invoice .
    It will allow to enter the item details , if the dupplicate invoice check is properly configured for that company code and ref number .Did you get the error mesage after entering the details?If you get a error a message which stops furthur entry them your conf is correct, if not you may need to check back .
    Check the invoice toletrances at spro too amount.
    the below link explains you the process of dupliation in LIV.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/ce/4f3e39ea3aee02e10000000a114084/frameset.htm
    Regards,

  • Dunning - 2nd level dunning is not working

    Hello Experts
    I have received a requirement from client for configuration of two level dunning (ie 14 & 35 days). I did the following configuration
    (a) Defined the Dunning Area
    (b) Defined the Dunning procedure in the following manner:
    Dunning Interval in days - 1
    No. of Dunning Levels - 2
    Total Due items for Dunning - 0
    Minimum Days arreas - 14
    Line Item grace period - 14
    Selected -> Standard transaction dunning
    Under Dunning Level Tab
    Days in Arrears - 14 & 35
    We are not using interest & no penality charges.
    Assigned the Dunning Test with the following combination
    Letter 1 u2013
    W_MHND-BUKRS = Company Name
    W_MHND-MAHNN = 1
    W_MHND_SMABER = Dunning Area
    W_MHNK-MAHNA = u2018Dunning Procedureu2019
    Letter 2 u2013
    W_MHND-BUKRS = Company Name
    W_MHND-MAHNN = 2
    W_MHND_SMABER = Dunning Area
    W_MHNK-MAHNA = u2018Dunning Procedureu2019
    (c) Maintained the Dunning Area in customer master data -> Company code data -> Correspondance
    (d) I have posted the sales invoice with posting date and due date as 01.03.2011.
    While carrying the dunning activtity through T.Code F150 (I did the 1st level run with dunning date as 22.03.2011 ) -> All the activities are going smothly like Dunning selection completed, Dunning Print out completed and Sample Printout is completed for the 1st level
    The second level dunning is carried on 26.04.2011 as dunning date. However, after completion of selection perameters.  the system is showing as Dunning Selection is completed bu the system  log says as follows:
    Date        Time               Message
    26.04.2011  15:34:12    Job started
    26.04.2011  15:34:12    Step 001 started (program SAPF150S2, variant &0000000000523, user ID AMUNNALURI)
    26.04.2011  15:34:12     ******************   Log for dunning run 20110430 / TEST1  ****************
    26.04.2011  15:34:13     =========================================================================
    26.04.2011  15:34:13    > Account D 0000000061, company code SC01 is being processed
    26.04.2011  15:34:13    >            Reading account data and document information    Phase 0
    26.04.2011  15:34:13    > Account D 0000000061 has a payment method for incoming payments
    26.04.2011  15:34:13    > Account D 0000000061 read items: 11
    26.04.2011  15:34:13    >             Processing and completing dunning lines         Phase I
    26.04.2011  15:34:13    >   Doc. 0090000052/2008/001 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Document 0090000380/2008/001 has new dunning level 1.
    26.04.2011  15:34:13    >   Doc. 0090000381/2008/001 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Doc. 0090000384/2008/001 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Doc. 0090000387/2008/001 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Doc. 0090000614/2008/001 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Doc. 1400000052/2008/002 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Doc. 1800000012/2008/001 has payment method for incoming payments, no dun.notice
    26.04.2011  15:34:13    >   Document 0064000433/2010/001 has new dunning level 2.
    26.04.2011  15:34:13    >   Document 0064000437/2010/001 has new dunning level 2.
    26.04.2011  15:34:13    >   Document 0064000438/2010/001 has new dunning level 2.
    26.04.2011  15:34:13    >           Check legal dunning procedure and credit memos     Phase II -
    26.04.2011  15:34:13    >           Minimum charges and dunning interest             Phase III
    26.04.2011  15:34:13    >             Generate dunning data                           Phase IV
    26.04.2011  15:34:14    Job finished
    If i continue the Dunning Print & Sample Print out.. the system is showing the following logs
    Date        Time      Message
    26.04.2011  15:35:31     Job started
    26.04.2011  15:35:31     Step 001 started (program SAPF150D2, variant &0000000000344, user ID AMUNNALURI)
    26.04.2011  15:35:31     >        Start print phase
    26.04.2011  15:35:31               0 dunning notices were read
    26.04.2011  15:35:31               0 dunning notices have been printed
    26.04.2011  15:35:31    End dunning printout 30.04.11 / TEST1
    26.04.2011  15:35:31    Job finished
    Kindly let me know, did i missed any steps in the configuration??
    Regards
    Anil

    Hello Renan
    Thanks for your reply, I am finding difference during 1st run and 2nd level run during selection perameters in the following area.
    (Note that, we are not using the Interest / charges)
    During 1st level dunning the system is showing as Dunning Level Log under Phase II, Phase III, Phase IV document no.
    26.04.2011  15:30:38    >           Check legal dunning procedure and credit memos     Phase II -
    26.04.2011  15:30:38    >           Minimum charges and dunning interest             Phase III
    26.04.2011  15:30:38    > Interest indicator 0N and currency GBP are missing in T056Z
    26.04.2011  15:30:38    >             Generate dunning data                           Phase IV
    26.04.2011  15:30:38    >
    26.04.2011  15:30:38    > Account D 0000000061 dunning notice/dun.area. Dunning area 58 is being processed.
    26.04.2011  15:30:38    > Account D 0000000061 dunning notice/dun.level. Dunning level 1 is being processed.
    26.04.2011  15:30:38    > Account D 0000000061 uses dunning procedure DG3
    26.04.2011  15:30:38    > Dunning level D 0000000061 is used for account 1
    26.04.2011  15:30:38    >   Document 0064000438/2010/001: Dunning level 1, days in arrears 20, status <.Dpi>
    26.04.2011  15:30:38    > Account D 0000000061 dunning data has been generated.
    26.04.2011  15:30:39    Job finished
    Where as for 2nd level dunning the system is showing under Dunning Level Log is as follows:
    26.04.2011 15:34:13   > Document 0064000438/2010/001 has new dunning level 2.
    26.04.2011 15:34:13   > Check legal dunning procedure and credit memos Phase II -
    26.04.2011 15:34:13   > Minimum charges and dunning interest Phase III
    26.04.2011 15:34:13   > Generate dunning data Phase IV
    26.04.2011 15:34:14   Job finished
    Due to this, i am presumed that some more configuration has been missed at my end.
    Kindly revert with your observations in the above log
    Regards
    Anil

  • Dunning notice not printed, forms for MAHNR '0003' RBUKM '1000 do not exist

    Hi,
    I have scheduled a 'DUNN' run 'F150' transaction for customer (say) '1390' and company code '1000'.
    I have also assigned the appropriate forms in the SPRO (customizing) settings.
    When I click on 'Individual dunn notice' and execute, I get the following message.
    Dunning notice for account: 'D ' '0000001390 ' was not printed.
    Forms for MAHNR: '0003 ', RBUKM: '1000 ', KOART: 'D ' do not exist (T047E)
    Although the respective entries do exist in 'T047E'.
    What would be the reason? What do I need to do?
    Best regards,
    Harsh Dave

    Hi Harsh,
    So first time it was run means the settings are configured properly but once again check it in correspondence tab in Customer master .There give the Dunning area beside the dunning process at dunning area button in dunning data .
    Check it is there any Dunning Block
    Did you given the forums like  F150_DUNN_01  at dunning text button in T.code FBMP.There we have to give the Dunning forums in what you mention dunning levels.
    1                F150_DUNN_01
    2                F150_DUNN_01
    3                F150_DUNN_02
    4                F150_DUNN_02
    Try it once again and update me..
    Regards
    Surya

  • Need few field information in Dunning F150

    Hi Friends,
    I am here because I haven't get any functional specification regarding the Script that I have to develop for Dunning F150. The client's requirement is as follows:
    1. In the first reminder they had some standard fromat includes, that should display the due date and the OPEN ITEM in the form coming from transaction.
    2. In the second reminder the due balance amount to the company and the previous due dates.
    3. In the final reminder it should dispaly the first two reminder dates and the pending balance to the company.
    Here my problem was, I couldn't analyze where all these fields are coming from...Can anybody please suggest me the fields where can I get all these fields and from which table does this open field and the rest belongs to.. with their descriptions.
    your help is appreciated.
    Thanks in advance,
    Murali.

    Did you check you set the Expand to Height property for the Text field? Also you need to set the Expand to Fit property for the Subform that surrounds the Text Field in the middle of the form.
    Thanks
    Srini

  • CPF contribution is not deducting on AWS amount for retried employee.

    Hi,
    Issue reported: - CPF contribution is not deducting on AWS amount for retried employee.
    fyi -even though employee is separated his bonus will be paid in month of December
    I have checked the AWS wage type, the culmination class 3 is checked, as it is an addition wage type.  And its 0185 and 0186 is not delimited also.
    How can I found out the root cause?
    Regards
    Thomas
    Edited by: Thomas Padiyara on Dec 9, 2010 2:49 AM

    Patch updates issue.

  • 4th  Dunning Letter not Printing....

    hi All,
    The 4th address line is not printing on the Dunning letters.  This is the 1st time we have run dunning letters in my company.
    Also I need  where  u201Cwe have an accounting clerk assigned, how can we update and change accounting clerk on dunning letters?u201D
    Please let me know where exactly i need to change the settings....
    Cheers.....

    Hello,
    Please check the form assigned to your dunning procedure.
    IMG ==> Financial Accounting ==> Accounts Receivable and Accounts Payable ==> Business Transactions ==> Dunning ==> Printout ==> Assign Dunning Forms
    Please check up with your ABAPer the logic put into the form. I believe the FORMS that you have assigned to the dunning procedure needs some correction.
    Regards,
    Ravi

  • Error when modifying VM Memory - "Invalid minimum memory amount"

    Good day,
    I am trying to modify a virtual machine's static memory setting using VMM 2012 R2 with UR 2.  The VM is running on a Hyper-V 2012 R2 host cluster.  Whether I use the VMM GUI or attempt to issue the command via VMM Command Shell, I get the same
    result:
    PS C:\Windows\system32> $VM= Get-SCVirtualMachine -name "SomeVM"
    PS C:\Windows\system32> set-scvirtualmachine -VM $VM -MemoryMB 4096
    set-scvirtualmachine : VMM cannot complete the host operation on the hyperv.domain.com server because of the error: 'SomeVM' failed to modify device 'Memory'. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297)Invalid minimum memory amount assigned for 'SomeVM'. The minimum amount of memory you can assign to a virtual machine is '32' MB. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297) (Error ID: 12700, Detailed Error:Unknown error (0x8005))
    Resolve the host issue and then try the operation again.
    To restart the job, run the following command:
    PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq"{8301e122-b69e-4ac0-82d7-82c473d99e3a}"})
    At line:1 char:1
    + set-scvirtualmachine -VM $VM -MemoryMB 4096
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~   
    + CategoryInfo          : ReadError: (:) [Set-SCVirtualMachine], CarmineEx   ception   
    + FullyQualifiedErrorId : 12700,Microsoft.SystemCenter.VirtualMachineManag   er.Cmdlets.SetVMCmdlet
    The error indicates that I am attempting to set the VM memory to something less than 32 MB, but as shown above I am actually trying to set it to 4096 MB.  I also get this error when I attempt to modify the value using Hyper-V Manager (or in this case
    the Failover Cluster Manager).  Note that I am not attempting to configure dynamic memory on this VM.
    One more note about this VM - it was migrated from a Hyper-V 2012 host cluster performed by exporting the VM from the old host, and importing it to the new one.
    Not sure if anyone else has experienced this error or if there is a work around.

    Really what the error is not telling you, is that you need to set the value for minimum memory in addition to the value you are setting.
    if dynamic memory is on, you need to set them all: 
    http://technet.microsoft.com/en-us/library/hh801341.aspx
    -MemoryMB<Int32>
    Specifies, in megabytes (MB), the amount of random access memory (RAM) on the host that is allocated to a virtual machine. The default value is 512 MB. For a virtual machine on which dynamic memory is enabled (on a host running Windows Server 2008 R2 SP1
    or later), use MemoryMB to specify the startup memory value.
    I have run into this issue what I had VMs that I migrated to Hyper-V 2012 R2, because the minimum was actually lower.  Or it was empty if the VM had fixed memory.  And now it can no longer be an empty setting.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • I am on a MAC Application. It has  been rejected by following reason.  This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed. We recommend implementing receipt validation to reso

    I am on a MAC Application.
    It has  been rejected by following reason.
    This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
    We recommend implementing receipt validation to resolve this issue.
    At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
    Any help ?
    Thanks in Advance.

    I am on a MAC Application.
    It has  been rejected by following reason.
    This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
    We recommend implementing receipt validation to resolve this issue.
    At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
    Any help ?
    Thanks in Advance.

  • Set minimum payment amount

    Hello,
    We are on E-Business R12.1.1. Does anyone know where to set the minimum payment amount for a cheque run? Specifically, when we do a payables check run, we would only let a payables check be generated if the combined total of the invoices to pay were over a certain dollar limit? I see where you can set it at the bank account level, but was wondering if you could control it at the "payment process request"
    Thanks...colin
    Edited by: CJJ on Feb 16, 2011 7:11 PM

    That is an option I'm considering but I think it would show the errors in the log after the payment run is executed, rather than show them as exceptions at the proposal stage.
    Another consideration I must look at more in depth is the minimum amount set at the overall company code level, but this would impact all payment methods.  I need to do further analysis to determine feasibility of this option.

  • TRM  - system is not considering variable interest rates

    While creating an interest rate instrument in (TRM - Money Market), Tab u201Cstructureu201D with a variable interest rate, when I check in u201CCash flowu201D tab for the interest rates applied appears zero. The system is not considering the interest rate although this information is included in S_ALR_87008537 - Enter Reference Interest Rates.
    The variable interest rate our client is using is EURIBOR one month (EURIBEUR01).
    Can anyone help me with this?
    Thanks in advance,
    Daniel

    Hi Daniel,
    For updating cash flow with Ref Int Rate, please caryout following:
    a. In customization, company code general settings, make Ref Int Rate update automatically.
    or
    b. If you have not set this indicator, kindly update your contract with Tcode TJ09.
    I hope this will solve your problem.
    Regards
    Prasad AV

  • Minimum Dollar Amount for Checkout

    Hello all,
    I've seen this topic go unanswered in the past, but have found an article which outlines a method to prevent customers from checking out until they have a certain amount in their shopping cart:
    Require Minimum Order Amount or Product Quantities in an Adobe Business Catalyst Shopping Cart
    I've tried implementing this on my own site. The feature preventing customers from checking out is working fine. However, when the correct amount is reached, the checkout button doesn't proceed to the payment page.
    I'm testing it on a bare-bones trial site I have set up:
    http://testing-this.aspirecms.com/store
    Anyone have any ideas on where I am going wrong?
    Thanks in advance,
    John

    I've built one for 3 clients of mine in Javascript. I can tell you it's very possible. Basically hide the checkout button unless the total if over a certain amount...
    Pseudocode is:
    If total < minimum then
      "display message of you don't have enough"
      remove checkout button
    end if
    Happy to help you with any questions but I sell it as part of several shipping and checkout modules I've built so I can't just post my code.

  • Oracle 12c Environment does not meet minimum requirements

    Trying to install Oracle 12c on Red Hat Linux Enterprise 6 and getting the following error message;
    WARNING: [WARNING] [INS-13001] Environment does not meet minimum requirements.
       CAUSE: Minimum requirements were not met for this environment
       ACTION: Either check the logs for more information or check the supported configurations for this product..
    I know that In version 11g it would list the RPM that are missing for the install.  Where can I find the same thing for 12c?
    Looking at the log file;
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.ivw.common.validator.SupportedOSValidator:381
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
      at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:354)
      at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:200)
      at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:182)
      at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8304)
      at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8253)
      at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:7300)
      at oracle.install.library.util.cvu.CVUHelper.isPreReqSupported(CVUHelper.java:377)
      at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnvironment(SupportedOSValidator.java:67)
      at oracle.install.ivw.common.validator.SupportedOSValidator.validate(SupportedOSValidator.java:94)
      at oracle.install.commons.flow.validation.ValidationHelper.validateState(ValidationHelper.java:188)
      at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlowExecutor.java:420)
      at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(AbstractFlowExecutor.java:644)
      at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:336)
      at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:276)
      at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:235)
      at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
      at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:129)
      at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:105)
      at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:439)
      at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
      at java.util.concurrent.FutureTask.run(FutureTask.java:138)
      at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
      at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
      at java.lang.Thread.run(Thread.java:662)
    ---# End Stacktrace #-----------------------------
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:384
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
      at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:354)
      at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:200)
      at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:182)
      at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8304)
      at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8253)
      at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:7300)
      at oracle.install.library.util.cvu.CVUHelper.isPreReqSupported(CVUHelper.java:377)
      at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnvironment(SupportedOSValidator.java:67)
      at oracle.install.ivw.common.validator.SupportedOSValidator.validate(SupportedOSValidator.java:94)
      at oracle.install.commons.flow.validation.ValidationHelper.validateState(ValidationHelper.java:188)
      at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlowExecutor.java:420)
      at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(AbstractFlowExecutor.java:644)
      at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:336)
      at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:276)
      at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:235)
      at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
      at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:129)
      at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:105)
      at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:439)
      at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
      at java.util.concurrent.FutureTask.run(FutureTask.java:138)
      at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
      at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
      at java.lang.Thread.run(Thread.java:662)
    ---# End Stacktrace #-----------------------------

    Check page #58 of below document.
    http://docs.oracle.com/cd/E16655_01/install.121/e17720.pdf
    For other linux
    Oracle Linux 6:
    # yum install oracle-rdbms-server-12cR1-preinstall
    Oracle Linux 5:
    # yum install oracle-validated
    HTH
    Anuj
    Oracle 12c SIG -->   http://www.linkedin.com/groups?gid=4847720&mostPopular=&trk=tyah

  • Oracle Installer:[INS-13001] Environment does not meet minimum requirements

    Hi,
    I am trying to install the latest Oracle Database software on the latest Oracle Enterprise Linux and the installer returns "Environment does not meet minimum requirements".
    Oracle Enterprise Linux 6.3 x86-32
    Oracle Database 11.2.0.3 x86-32
    cd /stage/Oracle_Database_11.2.0.3_Linux/x86_32/database
    ./runInstaller
    1. Configure Security Updates <next>
    2. Download Software Updates <next>
    Get the warning screen with the error,
    Oracle 11g Database Release 2 Installer:
    [INS-13001] Environment does not meet minimum requirements.
    Are you sure you want to continue ?
    I looked the log file but it didn't tell much.
    cd /tmp/OraInstall2012-12-15_04-26-04PM
    tail installActions2012-12-15_04-26-04PM.log
    INFO: Verifying target environment...
    INFO: Checking whether the IP address of the localhost could be determined...
    SEVERE: CVU do not support target environment..
    Refer associated stacktrace #oracle.install.ivw.common.validator.SupportedOSValidator:371
    INFO: Completed verification of target environment.
    WARNING: Verification of target environment returned with errors.
    WARNING: [WARNING] [INS-13001] Environment does not meet minimum requirements.
    CAUSE: Minimum requirements were not met for this environment
    ACTION: Either check the logs for more information or check the supported configurations for this product..
    Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:374
    INFO: Advice is WITHDRAW
    WARNING: Advised to shutdown the installer due to target environment verification errors.
    INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is -3
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    Have you seen this before?
    Thanks,
    Marcelo Marques
    Technical Manager, Esri

    Hi,
    A follow up on my comments from the previous message.
    "The DNS server failed to resolve the nslookup using host.domain."
    [marcelo]: I don't think this is a major problem, I have installed on the same hardware OEL5 and Oracle 11.2.0.1 without problems.
    $ nslookup student03
    Server: 8.8.8.8
    Address: 8.8.8.8#53
    ** server can't find student03: NXDOMAIN
    "You have incorrect versions of binutils, compat_libcap1, compat-libstdc++-33, gcc, gcc-c++, glibc, glibc-devel, ksh, libaio, libaio-devel, libgcc, libstdc++, libstdc++-devel, make, or sysstat installed on your system. Make sure that the correct versions are installed. For the required versions, see Knowledge Article 169706.1."
    [marcelo]: I have reinstalled the rmps but still get the same problem.
    [root@student03 Packages_x86_32]# rpm -Uvh binutils-2*
    Preparing... ########################################### [100%]
    package binutils-2.20.51.0.2-5.34.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh compat-libcap1*
    Preparing... ########################################### [100%]
    package compat-libcap1-1.10-1.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh compat-libstdc++*
    Preparing... ########################################### [100%]
    package compat-libstdc++-33-3.2.3-69.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh gcc-4*[root@student03 Packages_x86_32]# rpm -Uvh glibc-2*
    Preparing... ########################################### [100%]
    package glibc-2.12-1.80.el6.i686 is already installed
    Preparing... ########################################### [100%]
    package gcc-4.4.6-4.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh gcc-c++-4*
    Preparing... ########################################### [100%]
    package gcc-c++-4.4.6-4.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh glibc-2*
    Preparing... ########################################### [100%]
    package glibc-2.12-1.80.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh glibc-devel*
    Preparing... ########################################### [100%]
    package glibc-devel-2.12-1.80.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh ksh*
    Preparing... ########################################### [100%]
    package ksh-20100621-16.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh libaio*
    Preparing... ########################################### [100%]
    package libaio-0.3.107-10.el6.i686 is already installed
    package libaio-devel-0.3.107-10.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh libaio-devel*
    Preparing... ########################################### [100%]
    package libaio-devel-0.3.107-10.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh libgcc*
    Preparing... ########################################### [100%]
    package libgcc-4.4.6-4.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh libstdc++*
    Preparing... ########################################### [100%]
    package libstdc++-4.4.6-4.el6.i686 is already installed
    package libstdc++-devel-4.4.6-4.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh libstdc++-devel*
    Preparing... ########################################### [100%]
    package libstdc++-devel-4.4.6-4.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh make*
    Preparing... ########################################### [100%]
    package make-1:3.81-20.el6.i686 is already installed
    [root@student03 Packages_x86_32]# rpm -Uvh sysstat*
    Preparing... ########################################### [100%]
    package sysstat-9.0.4-20.el6.i686 is already installed
    Thanks,
    Marcelo

Maybe you are looking for