Dunning letter F150 issue

Hi ,
I want to send dunning letter through F150 tcode.The customer wants both option email as well as print.I have done the coding for both.But the program takes only one option at a time. The client wants both the option that send mail as well as print.How to do this.
Thanks & Regards,
Anagha Deshmukh

Hi,
You can [Check this. Hope this might be helpful|Sending dunning letters by email;. And also [Check this thread.|Dunning letters Option - Print/email;.
Thanks,
Abhijit

Similar Messages

  • XML DUNNING LETTER TEMPLATE ISSUE

    Hi every one,
    I mapped the fields for the dunning letter report in RTF file.
    I have an issue when i work into dunning letter template for xml report.
    My Client wants to run the dunning letter by choosing the different languages before they run the concurrent program.
    I dont knw where to write xml coding to make this report for mutiple languages and you please could any one knw the answer step by step.
    please drop the solutions immediately and its very urgent.
    Regards
    Prabu

    Set the language preference on the customer site on the "Characteristics" tab, then when the program "Dunning Letter Print from Dunning Letter Generate" runs you will have a separate output for each language. Then run each output through the "XML Report Publisher" program and choose which XML template to run.

  • AR Statement /Dunning Letter Report Issue

    Hi Guys,
    I have an issue in the Customer statement report in XMLP. There are two Concurrent Program for this Print Statement (i.e; Print Statement and Statement Generate Program) Here Print Statement runs with respect to the ARXSGPO.rdf file and Statement Generate Program runs with respect to the spawned program.
    I followed the following steps to view the output in PDF using XMLP.
    1. I used ARXSGPO.rdf which is from "Print Statement" Concurrent Program.
    2. I have given the exact short name(ARXSGPO) of Print Statement to the Defination and Template also attachment in XMLP responsibility.
    3. When i see the output after both parent (Print Statement) and child(Statement Generate Program) completed successfully. I can able to see the output only in XML format. Obvisouly it should display in PDF format right?..
    Do we need any other steps to go through to achieve this AR statement report. Same issue i have with the Dunning letter report. Please drive me if any one already worked for these two reports in xmlp.
    Awaiting your comments
    with regards
    Prabu

    Hi Prabu,
    Please refer to solution on forum:
    AR Statement is not displaying PDF output where it used to display earlier.
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Problem in Display Dunning Letter - F150

    Dear Experts,
    While I run F150, for example for Customer XXXX.
    The Customer have 3 open item/ document number with different arrears (14, 60 and 180)
    which is the customer shoud be have 3 reminder letter (1, 2 and 3).
    But when I check the sample letters and display dunning notice, the dunning letter displayed
    only reminder 1 with detail list of his line items.
    Why reminder 2 and 3 not display in each document to be done?
    Fyi in FBMP the setting is:
    Days in arrears 14  60   180
    always dunn
    print all item
    Dunning interval in days : 1 ( my user want dunning run in everyday)
    Kindly advice.
    Thank you

    Hi Mohit,     
    Thanks for your respond.     
    It means: for 1 Customer, he will only have 1 reminder letter, depends on his previous dunning level;     
    even the customer have 3 documents/open items which have fullfill for 3 arrears? Therefore, 1 Customer will not have 3 reminder letter for 1 dunning run?     
    Is it correct?Kindly your respond.     
    Thank you in advance.

  • Dunning letter - F150

    Hello all experts.
    I have a great request, who can help me with some information on dunning letter u2013 transaction code f150.
    I set the type of correspondence, i assigned to the F150_DUNN_01 to form SAPF150V program, i allocated the printing correspondence RFKORD10 to the company code, I created a new dunning area, dunning keys, dunning procedure (FBMP), 
    I set interest rates for calculating penaltys and when i run the transaction f150, it appear the with the positions of customer bills, but i is not penalty, instead appears a line called " dunning tax" in wich the system that divides the balance in 1000.
    I'm interested to appear in dunning the penalty for each line ithemes
    Please can you help me with some information or documentation with something more to the purpose.
    Thank you in advance.

    Hello,
    Into FBMP, at the dunning levels, you have to check "Calculate interests";
    Then you have to Define Interest Calculation Types into OB46 transaction.
    Then into dunning procedure, Define Interest Rates into OB42 transaction.
    Hope my answers will help.
    Regards,
    Aurelien

  • Help need for Dunning letter (F150)

    Hi Experts
    I have  a problem with dunning letter
    In level 1 only the client needs Two tables data , In table one i need to print the over due items only and in table two i need to display all items(it may overdue or not) in main window.
    In debug i have find PRINT_DUNNING_NOTICE (FM is triggring).
    i have printed the table one data by using the text elements 530 - Line item heading , 531-- Line item line layout ,
    My question is how to print the Table two data, i didnt find other text elements for solving the problem.
    in this case what needs to be done, can we create the same text elements like 530 & 531 & 581 & 582.
    Thanks in advance
    suresh

    Hi
    I got the Result by doing the below process..
    Dunning outputs use the function module FI_DUNNING_PRINT_NOTICE. You can copy this to a Z function module and make some changes to the data selection. You will have to look into the code and decide what changes you need.
    The process to use a bespoke program to do the dunning print is as follows:
    UNDER FI GLOBAL SETTINGS in the configuration,
    There are Business Transaction Events. Within that you can configure the same to enable a Z function module in place of the standard function module (from the FUNCTION GROUP F150)
    u2022 Create function group ZFTP_F150
    u2022 Copy standard function module FI_PRINT_DUNNING_NOTICE of function group F150 to ZFTP_FI_PRINT_DUNNING_NOTICE in function group ZFTP_F150
    u2022 Copy standard function module PRINT_DUNNING_NOTICE of function group F150 to ZFTP_PRINT_DUNNING_NOTICE in function group ZFTP_F150
    u2022 Within the function module ZFTP_FI_PRINT_DUNNING_NOTICE, change function module call for PRINT_DUNNING_NOTICE to ZFTP_PRINT_DUNNING_NOTICE
    u2022 Create a new include ZFTPI_ROUTINES within the function group and copy the subroutines LOG_MSG, LOG_MSG_TAB, & LOG_SYMSG from the function group F150 to this include
    AS AN ALTERNATE, YOU CAN COPY THE WHOLE FUNCTION GROUP
    u2022 Maintenance view TBE31 (SM30). Change the function module from FI_PRINT_DUNNING_NOTICE to ZFTP_FI_PRINT_DUNNING_NOTICE against the event 00001720 FI-FI entry

  • Dunning Letter Printing Issue

    Hi All,
    We are facing an issue with Dunning letter printout. When printing the dunning letter, additional log information is also getting printed.
    Does anyone know any config setting in this regard. Any pointers in this regard are much appreciated.
    Thanks & Regards,
    Ajay

    Hi All,
    Any pointers for the above query.
    Thanks in Advance,
    Ajay

  • Dunning letter based on Bill-to-party

    Hi,
    We have a custom smartform for Dunning letter which is a copy of a standard one.It is being triggered by BTE.
    We have an incoming structure 'mhnd' which is populated based on sold to party and picks up all the outstanding documents pertaining to it.The dunning letter is issued to the sold to party customer.
    The function module (FI_PRINT_DUNNING_NOTICE_SMARTF)trigggered by the event has mhnd already populated and is passed in the tables parameter.
    Now the requirement is to pick the data based on bill to party and issue it to that customer.
    How can we change the data in mhnd based on bill to party?
    Replies appreciated.
    Regards,
    Blessy

    Hi
    You don't need to change the print because sold to party and bill to party are both customer for FI, so u need only to know the right customer code.
    Max

  • Send Dunning Letter to Customer thorugh Email ID

    Hi anybody,
       Please explain to me how to send dunning letters into customer using Customers Mail IDs . My users asked to me once do Dunning letter F150  all customers dunning letter send corresponding customer mail address.
    How do I setup in SAP send mail to customer. Please explain steps of send mail to customer.
    I will appreciate goods answers to me.
    Thanks
    Regards,
    S.Muthu

    Sending dunning letters by email
    Hope this thread is useful.
    Regards,
    Ravi

  • How to setup dunning letter print out directly

    Hi anybody,
    I want print dunning letter F150 directly into printer. how do i setup in SAP. is there any setup in configuration of dunning letter printout?.
    Please explain to me steps of dunning letter printout.
    Thanks
    Regards,
    S.Muthu

    Dear S.
    go into the customizing (Transaction SPRO):
    Here Financial Accounting
    --> Accounts Receivable and Accounts Payable
    --> Business Transactions
    --> Dunning
    --> And here you can set up the basis settings then. And of cours the printouts.
    Hope this helps you to go on,
    Jessica

  • Send Dunning letter (TCODE F150) by email

    Dear Friends,
    I need to send a dunning letter(which is generating from tcode F150) through email to all the customers.I did BTE for event 00001040.function module is   SAMPLE_PROCESS_00001040. I copies above FM and rename as Z_RSAMPLE_PROCESS_00001040. I just add a break point statement and ran a F150 tcode. But it will not stoped at the breakpoint.
    I did FIBF settings also to register the modifications.
    Thanks
    Rasika

    How can i replace existinf FM with ZFM.
    What i did was i copied the existing FM to ZFM and activated it.
    After that i went FIBF Settings.....> Products.....>Customer and created a new Z product .
    *Again i took FIBF Settings.....>P/S Module......>of a Customer and add my ZFM to slected(00001040) event.
    After that i ran the F150 but break point did not apper.

  • F150 : Dunning Letter

    Hi,
    Dunning letter procedure  (F150)  currently creates an output in PDF format but the remqt is to get the output in PDF and alos in text files with some modifications in the text file.
    Could anyone pls. help me how to achieve this.
    Thanks.
    Edited by: Sri KVS on May 20, 2010 9:55 AM

    Hi,
    sorry, here yesterday it was a day off.
    For the code, if you  want to copy the pdf you have to take the number of spool and convert it in an other pdf (but you will get the same printing). If you want to get an another form (different from the standard: no logo, header ...) you have to do a new form (smartform ou sapscript one) and to call this new form in the enhancement...
    if you do a new sapscript form: you should use: open_form.... write_element.... close form (like in the function standard F150_printing_notice)
    and if you use a smartform one, you should use the function     call function 'SSF_FUNCTION_MODULE_NAME'
    to know the function associate at your smarform form.
    and after
    call function lf_fm_name
            exporting
              archive_index        = toa_dara
              archive_index_tab    = tsfdara
              archive_parameters   = arc_params
              control_parameters   = ls_control_param
              mail_appl_obj        = ls_mail_appl_obj
              mail_recipient       = ls_recipient
              mail_sender          = ls_sender
              output_options       = ls_composer_param
              user_settings        = space
              is_vbdkr             = is_vbdkr
              is_nast              = is_nast
              iv_spras             = lv_spras
              iv_spras_ag          = lv_spras_do
            importing
              job_output_info      = ls_job_info
              document_output_info = ls_document_output_info
              job_output_options   = ls_job_output_options
              es_vbdkr             = vbdkr
            tables
              it_tvbdpr            = it_tvbdpr
            exceptions
              formatting_error     = 1
              internal_error       = 2
              send_error           = 3
              user_canceled        = 4
              others               = 5.
    for calling the form...
    It's depend of what you have to do: sapscript or smartform printing. But you will do a new form, i think
    Best regards
    Hote it'shelpfull

  • Dunning Letter for transaction F150

    Hi,
    I have developed a dunning letter , level 2 for transaction F150.
    As per the requirement it should display the balance in the beging rather than in last (as it was before)
    so I coped the print program and did some changes and Assigned that program to my sap script....
    but when i am going in debugging....
    it is taking the old program only...
    Anybody having any idea where to configure my new program??
    Thanks and Best Regards.
    Kusum.

    Hi Dubey,
    You can check the following customizing settings :
    Define Dunning Forms (with SAP Forms)
    We Require some standard u201CSPROu201D settings  :
    The standard settings allow us to create dunning notices using SAP Smart Forms, we must first define the corresponding function module in u201CSPROu201D.
    1. Financial Accounting (New) Financial Accounting Global Settings ( New )  -->Business Transaction Events.
    The SAP Business Framework screen appears.
    2. Choose Settings -> P/S function modules -> ... of an SAP appl. .
        Continue..
    3. Under the Business Transaction Event (BTE) "1720" with application indicator FI-FI, change the function module name and save your entries.
    Standard settings in u201CSPROu201D
    Financial Accounting (New)--> Accounts Receivable and Accounts Payable -->Business Transactions --> Dunning --> Printout ->Assign dunning forms.
    Select u2018Dunning Procedureu2019 and choose u2018Forms for normal dunning procedureu2019
    Choose u2018Company Codeu2019
    Change the name of your dunning form
    I thought, it will work for your requirement.
    Thanks
    Raghava Vakada

  • Invoice number on F150 dunning letter

    Hi,
    We need to have invoice number on the dunning letter on the trans code F150. May I know what are aspects or points we need to suggest to Abapers form the FI point of view
    Thank you
    Chaithra

    hi,
    Henri
    Thanks for your response. May i know in detail about it please. Where to write these sap scripts please.
    Thank you
    Chiathra

  • F150 : Dunning letter print

    Hi,
    I customized Form for a Dunning letter (level 1) in Tcode FBMP, but when I tried to print a dunning letter I get this message : 'Form ZF150_DUNN_1 does not exist'
    Is there any other customizing point must I do ?
    Please advise
    Regards.

    HI,
    It seems that the dunning form is not assigned properly
    In FBMA  click on dunning procedure - > dunning text - > give Company code -> And check whether form is assigned there
    Atlast   Try OBL6 might give you some idea
    hope this helps
    pbb

Maybe you are looking for