Dunning letter to multiple recepients

Hi gurus: Is there a way to send out the same dunning letter to multiple recepients? Standard SAP allows only the correspondence tab in the customer master to be the source of the dunning information & that is only one fax # or email address.
Can this be substituted to read multiple email addresses or fax #'s?
please advise
thanks
Brian

Hello Brian,
Standard SAP code reads only the fax/email for which the default radio button is selected. You could change the function module to read all the fax/emails and call the fax/email function module in a loop for the values read.
I have not tried the email myself, but we could do the multiple faxes.
Regards,
Leela

Similar Messages

  • One dunning letter for Multiple Customers

    Hi SAP Gurus,
    In dunning i want to create one dunning letter for Multiple Customers, what necessary  settings that i have to do.please help me.
    Thanks in Advance.
    RAVI

    If it is single email address for all the customers of a sales organization, then you can maintain the email address at the sales organization level in t.code OVX5. If SPRO side change is not allowed, then you either maintain in SO10 text, or alternatively you can think about adding it in Z-table if it is easy to maintain and available in your system.
    Regards,

  • Dunning letter cannot be released to multiple customers

    hi sap gurus,
    i did the all settings for dunning still  "Dunning letter cannot be released to multiple customers". can u pls help me.
    Thanks in advance,
    RAVI

    Hi mauri,
    Thanks for your reply
    I dont have authorization to view this can u send me the notes pls.
    Thanks in advance,
    RAVI

  • Dunning letter -smartform - F150_DNN_SF

    hi all,
    am creating a smart form for dunning letter F150_DUNN_SF , we have three levels of dunning based on the past due days.
    level 1 , level 2 and level 3 and each level has its own format for print output. so basically i need to trigger three smart forms for a customer.
    I have created to three forms but functional team assigned it to the dunning level .
    now my question is how these forms are triggered by dunning level and where should i do customization based on the dunning level in order to print the corresponding format the presumption that customer will always have three dunning levels of past due invoices.
    example if there are 20 invoices past due.
    10 Invoices- dunning level 1 ---trigger smartform 1
    5 Invoices-dunning level 2 --trigger smartform 2
    5 Invoices- dunning level 3-trigger smartform 3.
    thanks
    GOVI

    The form trigger by dunning level is part of the dunning procedure configuration in the IMG.  If I understand your question correctly though, it does not make sense for one customer to have multiple dunning levels.  A customer has a single dunning level within a company.  The customer may have various balance ages but only a single dunning level, which is assigned by the dunning program based on the dunning area.

  • Dunning letter with multi currency

    Hi
    How to set dunning letter with multi currency.I have this customer that have multi currency transaction.How do i set the dunning letter to show multi currency value.Thanks

    hi mohd rizal,
    in dunning note configuration itself set the currency as USD. then it takes the local currency depending on the application. then it works for multiple currency's. bcoz it automatically takes the local currency.
    hope u get what im saying. still u have any doubts, get me back.

  • Creation of Dunning Leter

    Hi,
      explain the steps to create dunning letter?
      how should i retrieve the letter from PLD to dunning letter levels?

    Hi Subashini
    You can get to the dunning terms from Administration > Setup > Business Partners > Dunning Terms, or select the Navigation Arrow next to Dunning Terms on the Payment Terms TAB of the BP master. You can also go to Administration > Setup > Business Partners > Dunning Levels.Then click on the PLD (Pencil) and select the letter you want to edit.
    The dunning terms can be set up per customer or group of customers if there are multiple ways of treating customers. If not then you will only need 1 dunning term. On the dunning term, select the first row and choose the level letter for it (usually 1). Then set the parameters such as effective after (days) - based on due date. A new line will automatically be added as you tab through the columns. On the next row select the next level letter (usually 2) and so on. If you only need 3 levels for example, then you only need to change the PLD for the level letters selected.
    The level letter will be selected based on the days over the due date and whether or not the BP has been dunned before. Under the accounting TAB of the BP Master, it will display the last dunning run date and level for each BP.
    Hope this helps
    Kind regards
    Peter Juby

  • Dunning Letter Design & Aging report

    Hello Experts,
    I have a few doubts in B1 Sales AR -> Dunning and Aging Reports.
    1. How do we incorporate our own letter format for dunning letters? I looked for PLD's, but nothing was available in the print preview screen.
    2. When we execute Customer Receivables Aging report, what is the significance of the column "Future Remit"? In our B1 instance, the receivables that are due 60 or 90 days from current date are not appearing in their respective columns.
    Please advise on how to proceed
    With Regards,
    PS: We are running B1 2005-B / MS-SQL 2005

    Hi Kaatss,
    You should be able to find the Dunning letter formats by clicking on the layout designer button and then from the windows selecting the dunning letter formats from the 'Choose Document Type'.  They go by the ID of DUN0... DUN09.
    As for the columns the 60 and 90 columns show the invoices (values) that are overdue by 60 and 90 days respectively.
    The Future Remit column shows invoices that are still within the due date.  So if you raise two invoice with 60 and 90 day payment terms, but they are still within their due date, their values will appear in the future remit column.
    I hope this helps.  I use 2005A so I hope there are no differences.
    Damian

  • Dunning Letter as Crystal Report: What tables? (SAP B1 9.0)

    Dear Experts,
    I am being asked to revise the Dunning Letters for our clients.  The existing PLDs for each Dunning Letter shows most data fields as system variables.  The existing Crystal Report for Dunning Letter 1 is a conversion from the PLD and doesn't show table information for most of the report's main items.  There are tables in the report but they are standard ones (OADM, OADP, OCRD, OHEM, OSLP).  It also includes a "table" called "PLD__ITEMS" which has all the PLD system variables and no B1 table or field/column information.
    As I'm just now starting to work with dunning letters, I see that I can't even run this report in Crystal.  The PLD__Items datasource prompts me for a file path and class name.  Any ideas what one enters here to run the report outside of B1 (from the Crystal report designer)?
    The main focus of my question is: Has anyone created a Crystal Report to replicate the Dunning Letter and if so, what tables are involved and how are they connected?  If I can create a Dunning Letter entirely in Crystal, I can replicate it across all clients and get the correct fields/columns of data the clients want.  The inclusion of the PLD__Items apparently limits my ability to test the results.  I would prefer to avoid the PLD limitations.
    Thanks for any assistance.

    Thank you Nagarajan.  I have a dunning letter created in Crystal Reports for our client.  It is fairly limited in scope, it just has the customer name and address, invoice numbers and dates, amounts due and the text they wanted in it.
    I can import it into B1 9.0 and set it as the default for Dunning Letter #1 and it runs, but unlike other formats where there is a DocEntry and/or ObjectID and a ?DocKey@ or ?ObjectId@ parameter, how do I limit the report to just one customer?  Typical document layouts run for the document that's on the screen.  In the dunning process, the report runs once for every customer when the Dunning Letter Method is set to "One Letter per BP".  I have to limit the report to one customer at a time.  Right now, each dunning letter based on the Crystal report is identical and it contains all the data for every customer.
    So, does anyone have any ideas for what selection criteria needs to be included in the Crystal report to have it select just one customer from the dunning wizard tables?  Thanks.
    Michael
    Edit: I created a ?WizardID@ parameter and a ?CardCode@ parameter to limit the report to a single dunning wizard event and a single customer.  While it works fine in Crystal itself, it doesn't work in B1 at all.  I had thought that by limiting the report in this way, it would only create dunning letters for a single customer.

  • Dunning Letter Report for Portugal

    Hi All
    For Dunning Letter Portugal language rdf file made some changes in layout like removing break for credit
    and debit transactions and moving address field to right side
    But fields from Dunning letter setup in applications (first line) is getting truncated to half even after redoing changes it is behaving
    in similar way any hints on fixing this issue will be helpfull
    Thanks
    Kamalakar.G

    Hi Husain...Thanks for immediate response. There is already data being pulled by standard function modules like PRINT_DUNNING_NOTICE(copied into Z). Can we use that in simpler way(without the need of any new driver program with all the data population again)? And your answer is correct which I already thought earlier and kept it as a last resort, because I need to populate all the data again, convert spool to pdf and send pdf's to all selected customers And one more thing is that the requirement is to schedule a background job which takes care of sending all the emails . So any more ideas?

  • 'Dunning Letter Print from Dunning Letter Generate'

    hi,
    How can i run the "Dunning Letter Print from Dunning Letter Generate" standard program without runing the spwaned program called 'Dunning Letter Generate'.I mean i want to run the 'Dunning Letter Print from Dunning Letter Generate'(execution method: report) independently.
    I need to pass the parameters to the 'Dunning Letter Print from Dunning Letter Generate' directly instead of passing to the spwaned program ''Dunning Letter Generate".
    Thanks
    Devender

    Hi Gareth,
    New parameters to be add are:
    Tier : <xxxx>
    Service Segment: <xxxxx>
    Account Manager: <xxxx>
    Location where I am picking these 3:
    navigation:select any AR responsibility
    customer->standard(query with any customer)->customer address
    we have enabled 'site use information' dff in customer address window, from this dff we are taking these 3 parameters.
    reason to add these 3 parameters:
    we cant treat all the customers same. so we need to send some smooth(no harsh) dunning letters to some of our most trusted customers. so how can we identify gud customers in the list.
    so we have enabled site use information dff. those customers who is have values for these 3 parameters. will be treated as v good and reguler customers for us. so for them we can send other dunning letters.
    note*: this is to identify the customers like reguler customers,non requler customers.
    bez in spwaned program we have parameters like 1.customer low 2.customer high. thats it .so it is very difficult to find out the nature of customer.
    pls advice me on this..to proceed further..
    Thanks
    Devender

  • Dunning Letter Creation in XMLP running into Error

    Hi All,
    Although I'm trying to create a report from the seeded Dunning Letter concurrent program that is giving the intended XML files but when running the XML Report Publisher Concurrent program, the program is erroring out with the following error:
    *****************************************Start of Log *************************************
    XML Publisher: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOREPPB module: XML Report Publisher
    Current system time is 11-AUG-2006 09:13:51
    XML Report Publisher 5.0
    Updating request description
    Waiting for XML request
    Retrieving XML request information
    Preparing parameters
    Process template
    --XDOException
    java.lang.reflect.InvocationTargetException: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'set_xslt_locale'
         at oracle.xdo.parser.v2.XSLExtFunctions.getMethod(XSLExtFunctions.java:285)
         at oracle.xdo.parser.v2.XPathExtFunction.evaluateMethod(XPathExtFunction.java:267)
         at oracle.xdo.parser.v2.XPathExtFunction.evaluate(XPathExtFunction.java:225)
         at oracle.xdo.parser.v2.XSLVariable.getValue(XSLVariable.java:205)
         at oracle.xdo.parser.v2.XSLStylesheet.processVariables(XSLStylesheet.java:638)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:503)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:485)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:264)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:150)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:187)
         at java.lang.reflect.Method.invoke(Native Method)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:580)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:378)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:197)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
         at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1497)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:913)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:1766)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1277)
         at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 11-AUG-2006 09:13:59
    **************************************End of Log *******************************************
    As u can c from the error, it seems to indicate that I'm using the method 'set_xslt_locale' which evidently I'm not using in my Template. Does anyone 've any ideas as to why this error is been thrown out.
    I even tried putting a template with just the text as 'This is a test Template' in the RTF Template. I still get the above errors.
    Any potential workaround too greatly appreciated.
    Thanks for ur time.

    One thing of note is that when I downloaded the template using XDOLOADER, the xml publisher seems to 've created a .xsl file that has reference to the method mentioned above. So although, I'm not referencing it, XMLPublisher created .xsl is referencing it n hence the error. Also, I do remember having read that 'set variable..' method refernced above is only available for a higher version of XMLP. I think I'm on 5.0.
    So the question is do I've to upgrade to 5.5 or can I make do with 5.0 version? I would love to get around this problem without the upgrade.
    Thanks

  • Dunning letter - email/pdf problem

    I want to email a dunning letter to a customer.
    I have executed a dunning run.
    I go back to the Recommendation report for the dunning run - when I highlight the row under the customer name and click print preview I can see a preview of the dunning letter I want to email.
    When I click the 'Email' button and click 'Yes' to attach an edited report I thought that would attach the letter to an email as a PDF? (I have send E-Mail via Microsoft Outlook' selected)
    But when I check my Outlook sent box the email has been sent but there is no attachment of the dunning letter - it's just an empty email?
    I tried again and examined the 'Send message' box that appears when I click the 'Email..' button.
    The data tab shows the dunning run listed but the Attachments tab has nothing listed.
    Should the file be listed here if it had correctly attached?
    Incidentally when I click the PDF button this just brings up the same print preview instead of making a PDF of the letter - is this significant i.e is the PDF function not working hence the 'attach edited report' function also cannot work?
    I'd be grateful for advice on emailing dunning letters correctly
    Karen

    Hi Andrew,
    Check this Link
    Re: Email Dunning Report to the BP
    Re: Automatic Dunning By Email
    Regards
    Jambulingam.P

  • Dunning Letter on Receivables Aging SAP B1 2007

    You run the customer receivables aging report and double click a row on receivables aging report window. You highlight one row, there is no letter checkbox compare to SAP 2005 A. There is no Dunning Letter PLD as well. Therefore dunning letter report cannot be previewed.
    Does this letter checkbox and dunning letter PLD is not available in SAP 2007 A?
    Thanks,
    Kay Chong

    Hi,
    the document [Changed Features as of Release 2007 |https://websmp101.sap-ag.de/~sapidb/011000358700000281062007E.pdf]says the following:
    Dunning in Aging Report
    Application Path: Financials u2192 Financial Reports u2192 Accounting u2192 Aging u2192 Customer Receivables Aging u2192 Customer Receivables Aging u2013 Details window
    Availability: All countries
    Used for: indicating the dunning level linked to the document/transaction and creating a dunning letter if required.
                             Availability in
                             SAP B1 2007 A or B    Functionality changed?
    New installations        N/A                   No
    Upgrading customers      All countries         No
    So this functionality is only available for databases upgraded from an older release.
    Regards,
    Marcus

  • Interest on Dunning Letter

    Dear all,
    I have configurated dunning with charges and interest. The charges appears in the dunning run but not the interest. I have done following:
    - Entered interest indicator in the dunning procedure
    - Ticked calculate interest on level 2 and 3 in dunning procedure
    - Entered charges on dunning level 2 and 3
    - Entered an interest rate in transaction OB42
    Is there anything else I need to do for getting interest on dunning level 2 and 3?
    We don´t have separate interest calculation (interest invoices), only interest on dunning.
    Thanks in advance!
    Best Regards L

    Dear Maurizio,
    Exactly, I want the interest to be visible on the print out but no FI document posted. But why is there no iterest in my dunning run and print out?
    First havn´t enter any interest in OB42 and then I get information in log: Interest indicator 01 and currency EUR are missing in T056Z. So it seems that my configuration should work but not..
    I have entered in transaction OB81:
    01, EUR, 20110101, 1, Debit interest; arrears interest calc. 0,00, Premium 7,000000 (7% is our interest)
    01, EUR, 20110101, 2, Credit interest; arrears interest calc. 0,00, Premium 7,000000 (7% is our interest)
    Is above correct?
    I have read note 82995 and 874603. In note 874603, do I have to do all settings for interest calculation when I only want interest as information on printout? I understand the note that the information about interest calculation is when I have interest calculation separate from dunning (as FINT) and I don´t need to do all those settings when only information on dunning letter. Correct?
    Thanks in advance!
    BR L

  • XML DUNNING LETTER TEMPLATE ISSUE

    Hi every one,
    I mapped the fields for the dunning letter report in RTF file.
    I have an issue when i work into dunning letter template for xml report.
    My Client wants to run the dunning letter by choosing the different languages before they run the concurrent program.
    I dont knw where to write xml coding to make this report for mutiple languages and you please could any one knw the answer step by step.
    please drop the solutions immediately and its very urgent.
    Regards
    Prabu

    Set the language preference on the customer site on the "Characteristics" tab, then when the program "Dunning Letter Print from Dunning Letter Generate" runs you will have a separate output for each language. Then run each output through the "XML Report Publisher" program and choose which XML template to run.

Maybe you are looking for