Dunning level not automated change in Customer Master
Dear All,
We have an issue- once we completed F150, the dunning level was not automated change in customer master data after the first dunning was successfully run.
Do suggest.
Hi,
First check, whether you are getting same problem when creation of Master Data?
Some times we have to Stop the MMC and Restart MMC once again.
Still if you are getting same problem, please send the in which screen you got the problem and error description Performance Assistance screen also (double click on error message in the task bar to view Performance Assistance screen)
Thanks
Chandra
Similar Messages
-
Not able to create customer master data with country code US
Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VKHey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila -
Changes in customer master data
Hi
Is there a different way (apart from using IDOCS) to identify changes (create/update/delete) in customer's master data to the following Condition Class:
BPAR
TESTRF
DEBI
KLIM
Best Regards
TalHi
I want to know if all the changes in customer master data objects: BPAR,TESTRF,DEBI,KLIM
are recorded in the system and where?
is it relevant to customization?
Best Regards
Tal -
Change the customer master fields
Hi all,
I am looking for a BAPI or USER-EXIT to change the customer master fields KNA1-STCD3, BRAN1, BRAN2, BRAN3, BRAN4, BRAN5. If anybody knows please share.
Thanks in advance,
PranavHi Pranav,
If you want to change these fields while saving the trasaction XD02, use user exit: Enhancement- SAPMF02D and exit: EXIT_SAPMF02D_001 or BADI: CUSTOMER_ADD_DATA.
Reddy -
Mass change of customer master data
Hi,
I would like to do a mass change of customer master data.
I need to remove the international VAT register number for local Polish customers, as we will use the local NIP number for these customers.
Which transaction code do I need to use?
Are there any things I should keep in mind?
Thank you.
Kind regards,
LindaHi,
You haev a Transaction called MASS. Please check whether you have the authorization for the same. If you have then it is very much easy for you to maintain the same. If you dont have the MASS authorization then you have to create a LSMW and then make the change.
Steps:
1. Enter MASS
2. Object type - Select KNA1 (avaialble in the drop down) and execute
3. You should have an option "Customer master (VAT registration numbers general section) " with table KNAS. Execute
You will be able to choose those customers whom you want and make the changes.
Hope this should help you. -
Ship-to address changes on customer master not updating orders
We have recently noticed that ship-to address changes on the customer master made with XD02 no longer show up on existing standard orders. Similar changes to the sold-to addresses do show up but no tthe ship-to addresses. Does anyone know how we can resolve this problem?
hi jeff,
the adresses of a partner is
- with reference to the master-data ( if unchanges in the Order )
- of copied in the order and then changed and saved onlyy for the order.
in the first case, a change of the main data will effect a change in the order.
in the second case, the change of the main data will not change the order, data - they are separate.
you can see this in se16 / table vbpa.
look at the adressnumber.
Adressnumbers of 9++++ are of the 2nd - manual type.
I guess, in the ship to partner, there is done a manual change in the order.
in solt to data normally you don't need such a change. therfor the sold-to partner will get the changes of masterdata -- the ship to partner has manual adress of the orden.
hans -
Display Changes in customer master records
Hi Guru's
I have added a new bill to party and ship to patry in customer master record.
But the strange thing is :-
1.I want to see which bill to party and ship to party have been added through VD03=> sales Area =>.Goto Environment => Account Changes => All Fields => click on <b>Entry Button</b>=>Double Click on customer master partner functions..Now here I can see the entries added in the format time, user , USJ2 01 01 BP000 etc, but I cannot see the bill to party number even by doubble clicking on any entry(it will show sales area , partner funtion but will not give the partner number.
2. Even if I dont click on <b>Entries</b> button in account changes and goto <b>all changes</b> it will display the deletion and changes but will not display the entries, why?.
I also tryed the same through VD04 but still the problem is same.....any help please ..............Hi
check OV51 and also in tables KNA1, KNVV
all changes are stored in CDHDR and CDPOS tables
regards -
Prof Analysis characteristic changes KEA5 Customer Master to Sales Document
hello gurus
I need some help with this pa configuration change. our office in india wants to amend the 2 characterictics in bold in pa transaction kea5. currently they look at origin table - customer master sales data. charac details below No other changes will be made
charac desp sht text datatype lngt origin table orig field descrip
bzirk sales district sistrict char 6 knvv bzirk
vkbur sales office sales sff. char 4 knvv vkbur
business want to change these two characteristics from knvv to pick up the details from sales document order - table vbak for sales office and vbkd for sales district, so it matches with their mcsi. please note a number of changes are required on bw. But I am only concerned about pa changes, my colleagues will pick up bw changes.
please can I get some help with this configuration task, as I've never configured pa - It appears to be more complexed than regular fico config. I believe it is a fairly small change via transaction kea5, is that correct
please kindly provide the following information - 5 points below
1. intend on deleting these two characteristics linked to knvv and then linking to vbak and vbkd respectively.
2. the characteristice for vbak and vbkd already exist in config kea5, so I don't believe I need to recreate anything new, just pull in the fields, and link to the relevant characteristics.
3. please can you confirm if I only need to amend kea5 to configure the above scenario? Or are there any other tables/areas in spro I need to amend.
4. please can you provide me with step by step details on what I need to do to configure this new characteristic and scenario correctly.
5. finally please can you provide me details of what testing I need to do to test this change.
Thank you all very much.
Awaiting feedback from all pa gurus, thanks in advance
Thanks
Jay
Edited by: Jays77 on Jan 6, 2011 1:17 PM
Edited by: Jays77 on Jan 6, 2011 1:18 PM
Edited by: Jays77 on Jan 6, 2011 1:19 PMHello Ajay / and All -
Thanks very much for your feedback. I have carried out your configuration via KEDR, and created the derivation rule. Is it really as straight forward and I dare not say that easy, to create a new characteristic value.
Is there absolutely no additional configuration required via kea0 - Maintain Operating Concern or kea5 maintain characteristic values. I agree we have added this derivation rule and I can to some extent understand what we've done, but in kea5 and kea0, the old characteristic value and fields are still there - as detailed below. So it is still mapping to the old characteristic values, I can only assume this derivation rule overwrites what is in kae5 and kae0, is that correct.
charac desp sht text datatype lngt origin table orig field descrip
bzirk sales district sistrict char 6 knvv bzirk
vkbur sales office sales sff. char 4 knvv vkbur
I just want to make extra sure, I don't need to delete these old characteristic values, and add the new characteristic values to KEA5 and KEA0. The new characteristic values are not on kae5 and kae0 - hence my concern.
Please kindly confirm configuration if any addition config is required, or only changes via KEDR as explained in your previous reply.
Thanks again for your help - Much Appreciated.
Jay
Edited by: Jays77 on Jan 6, 2011 3:02 PM -
Address change in customer master
Hi Experts,
I have cretaed sales order and processed it with one customer.Created Delivery and posted goods issue.
After that I have changed the address of the customer and noticed that the adress is changed in the processed order also.
I would to like to know what is base intension of this.
Please help me out
Thank you
Regards,
Nagi ReddyDear Nagi,
All Customer Address are stored in a central table - ADRC.
Infact this ADRC is the Master Table of all addresses in system (It is used for addresses of Customer, Vendors, other Business Partner, etc)
So any change you make in Customer Master Record in XD02 / VD02 it would change the entry in the ADRC & would show this effect in all the past documents also (like Sales Orders / Deliveries, etc).
This is SAP standard & you cannot change it.
Address details are only exception here. Rest all other data like payment terms, Condition record data are document specific. Meaning once the Document is created & saved any change in the Master Record would not impact the aleready processed documents.
Alternatively you can change the Customer Address while processing Sales Order:
VA02 - Double Click on Customer code & you will go to Header - partner screen.
Here once again click on required Partner code & you will go to Address screen. Here you can change the address (which is proposed from Customer Master record). This address change in Sales Order would be applicable only for the particular Sales Order & its subsequent documents. The Master Record would not be changed.
Hope this helps...
Thanks,
Jignesh Mehta -
VAT Rate change on Customer master (F0301)
Hi All,
Does anyone have any idea why when I update the tax rate on the Customer Master F0301 (A5TXA1) on the access database, the change is not reflected on the screen when re enquiring? However, if I make the change on the customer Master screen within JDE, it changes the value on the F0301. Am I going mad or am I missing a step?
Many Thanksthis sounds, that you work with the Oracle E-Business Suite.
There is a forum for you in the OTN, where you get the answer. The forms-forum is not the best place for getting such answers. -
Internal number not showing while creating customer master record
Dear All.
After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is not displaying. I have set number range internally.
Thanks..
CG Balaji> Dear All.
>
> After creation of account group and doing patner
> determination procedure, while creating customer
> master record it is showing all the 4 functions of
> partner in partner function tab page but the internal
> number is not displaying. I have set number range
> internally.
>
> Thanks..
>
> CG Balaji
Hi,
In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
This will allow taking INTERNAL numbers during customer creation.
Thanks and reward points if useful -
In the customer master transaction, it picks up all changes made to a customer (whether it be a name changed, address change, etc...). It has the date and time stamps associated with the field changes. Does anybody know which table is being used to store these information?
I need to be able to get any changes related to the contact info (name, adrress, and phone). I would like to be able to pick up these changes from whatever table the customer master is using and modify my process from there.
Thanks in advance!Hi,
check the Customer master table CSKS and get the latest records with changed on date or by user if you know of it and you can manipulate those records.
Award points if it helps. -
Mass Changes to Customer Master partner functions
Hi Gurus,
I would like to change PE (Sales employee) MASS please guide me.
ThanksHi,
Goto the T.Code "XD99".Or Goto the T.Code "MASS".Here(In MASS T.Code),select teh Object Type as "KNA1".
Click on Tables.
Select "Customer Master Partner Functions(KNVP)".
Click on Execute.
Enter the range of Customer Numbers/single values in the multiple values.
Select the Partner Function as "PE".
Execute.
Click on Select Fields(First Icon under Customer master partner functions).
Select "Customer(KNVP-KUNNR)" and click on Choose.
Enter.
Enter the value for the field "New Values" and ensure that all rows are selected.
Click on the icon "Carry out a mass Change"(sixth icon).
Save.
Regards,
Krishna. -
Transportation zone can't be change in Customer Master
Hi Guys,
I have a question regarding changing the Transportation zone in Customer Master. This area is being greyed out as I cannot change it. Even if I extend the Customer, the field for Transportation zone is greyed out. My question is, how can I change the transportation zone for an existing customer?
Best Regards,
SaravanandHi
Transportation zone of the customer master is copied from the genenral data - address tab to the sales area data - shipping tab.
in OBD2 if you maintain general data - address as required or optional you can change in the customer master of general data - address tab, if you changed here it will copied to sales area - shipping tab
regards
vardhan -
Dunning levels not updating as per procedure
Hi gurus
Customers has very old items with dunning level 2 and recent dunning run should be the 3 rd level but till old items has 2 nd level only .
could you please give some information on the smae
regards
Sambhahi ravi
In proceudre maintaine 4 levels and now the customer has open items form 2008 december
It should be the 4 th level but the old items has 1 st level with new items
please inform the why the level goes to low level
Thanks
Sambha
Maybe you are looking for
-
Ipod now charging, but still not showing in windows
Hi people, I left a post a few days ago, when my computer would not even let the shuffle charge however, now the shuffle is charging and playing music, but windows or itunes still wont recognize it, so i cant try the disk manager approach or the ipod
-
Why does my older PDF files print an all black background and white letter/numbers?
I have a laserjet 1536dnf MFP. Printing older adobe pdf's results in an all black background with white letters / numbers. How can i correct this. It doesn't happen with newly created PDF's from the 1536dnf scanner.
-
I want create an extension for fennec (mobile firefox) in android, i have already an android application and i want lunch it from mobile firefox, by tapping a button that i will add to the user interface of mobile firefox web browser, is this this po
-
hi, if table column is numc but in screen painter i define as char, can the number appear? i tested it cannot show the number. thanks
-
A few months ago i was in the same position, having to re-install Creative Suite on a new laptop. For some reason it was very easy, but I can't remember how it was done. I don't want to have to contact my institution for proof of status again, and wa