Dunning List Not Showing for Old Run

Dear All,
We are in ECC 6.00 and using dunning functionality in its most simple form.User run this program on 5/2/10 with identification 041001, 042001 and 043001 and identification 041001 was having data for Dunning List on Friday that is 5/02/2010.
But on 8/02/2010 when user select Run on 05.02.2010 ID 041001 and choose Dunning List. It's not have any data.
But on 5/02/2010 everything worked just fine.
This does not happen in QAS.
Can anybody please tell what could be the possible reasons.
Please Help
Regards
Raju

Dear Robert,
Can you please elaborate when you say Run ID is stamped against particular Run. What is the effect?
Please Help.
Regards
Raju

Similar Messages

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Lens Profile not available for old photos

Hi
I got busy creating a lens profile for my Canon 550 and EFS 15-85 f/3.5-5.6 IS USM as there was no profile listed for this lens when I took some photos in early July. I now find that the profile is now available (for the photos taken in the last week or so) and automatically selected when I select 'Enable Profile Corrections' BUT is still not available for the older photos - can someone tell me how to get the new profile available for the older photos - in fact why does the list not show the new profile??

Thanks Ian
I do all RAW now but to get more photos on my SD card
used JPEG for a time.
Richard

Goods movement list not showing EAN in Order Unit..!

Hi Guys,
I have an issue with goods movment list (tcode MB26).
good movement list not showing EAN in Order Unit..!
EAN No. and Storage Bin is maintained in Material Master but its not showing up Goods Movement list.
Please find the screen shots.
Thanks
Sam

are you still in 46c release? for 46c exists an OSS note to fix the issue with the bin:202240 - Transaction MB26: Storage bin is not supplied

Contact choice list not showing up on dial screen

I have a large contact list in the address book and today the contact choice list not showing up on the dial screen when I press the first one or two letter of the contact name, for example, there are 2 contact in my address book, John Smith and John Joe, when I press "john", BB will filter the address list and show up 2 contacts above in the choice list, but it stop working today, any ideas? thank you.

Never mind! If anyone else has this issue.... After trying numerous things , I simply turned iMessages off on ipad, restarted ipad and logged back in.

I am unable to change my iCloud email address on my phone. It is changed and verified in my account. How do I change it so that my iPhone is not showing my old address? Many thanks to all in advance

I am unable to change my iCloud email address on my iphone. It is changed and verified in my account and when I log in to Cloud on my PC its fine. However when I go through the settings on my iphone (3GS) it still coming up with my now inactive old email address.
How do I change it so that my iPhone is not showing my old email address and shows my new and verified email address? Many thanks to all in advance

If you have given correct info about you ios 6.1.3 - all you need to do is delete account. You will be able to sign in with new one afterwards. Make sure you don't delete any info when you see those prompts.

Function Module not working for old Role

Dears
Function Module not working for old Role
Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
Pl check the fucntion module with given roles below and identify the root cause,
EP_TRVL_ALL_CAB - Old Role
EP_TRN_TRVL_DRGC_V2 - New Role
Regards
Krishna Mohan CH
9704500717

Krishna,
I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
What are you trying to achieve? Maybe there's a better way to do that...
Frank.

2013 Custom Web Parts in Page Layouts not showing for users

Custom Web Parts in Page Layouts not showing for users
I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
Any help would be appreciated, Havent found anything on this issue online. weird.

It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
John Architect

Transparent pop up list not showing?

Transparent pop up list not showing ?

This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
Just check if your business role is properly configured. Thats all i can say.
Regards
Kavindra

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Time column duration not showing for my podcast

the time column duration is not showing for my podcast shows on the iTunes Store: https://itunes.apple.com/us/podcast/income-press-podcast-blogging/id500448874
For some odd reason it just stopped showing the duration.
Any help or ideas would greatly be appreciated.
Thanks,
Joey

Your feed is at http://feeds.feedburner.com/incomepresspodcast
You have no 'itunes:duration' tags in the feed, which are necesssary for the duration to show in the Store and when subscribing, though in that case the duration will show once the show has downloaded as the iTunes application will detect it from the file itself. In order to show the duration in the Store you need to add this tag, though I can't advise on how to go about it in Wordpress.

My iphone problem is network bar not show for searching why how can resolved my iphone

my iphone problem is network bar not show for searching why how can resolved my iphone
my iphone model is MD239B/A
my iphone serial no: DQ******TD2
<Edited by Host>

Hi mirza_ali,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
iOS: Understanding cellular data networks
iPhone: Wireless carrier support and features
I hope this information helps ....
Have a great day!
- Judy

HT2534 The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

HI..
The None option is not available in all countries
iTunes Store: Which types of items can I buy in my country?

Services for Object (GOS) Attachement List not showing after attachment

Hi All,
I have created a new entry for the Generic Object Service List and this links to a copy of the CL_GOS_SRV_ATTACHMENT_CREATE class (Create attachment) with some additional logic. However, after attaching a file, the "Attachment List" does not become available until after I re-enter the transaction. The attachment list is showing the correct attachments.
After some (understatement...) investigation, I found that even if I try and link the new service to a unchanged copy of the CL_GOS_SRV_ATTACHMENT_CREATE service in SGOSATTR, it is not working. It is attaching fine, but the "Attachment List" entry in the Services for Object Menu is still greyed out. If I attach the original class CL_GOS_SRV_ATTACHMENT_CREATE to the newly created entry it works fine. e.g. straight after I attach a file to the transaction, the menu entry becomes available.
I can't find where the re-draw of the GOS menu happens and hence can not determine what is going wrong. Does anybody know if this is part of the Kernel or is this actually done in ABAP ?
Am I missing something ? Debugging including system debugging for two days now and can't find it... very frustrating.
Any help would be appreciated.
Thanks,
Wouter.

Hi Wouter,
I had originally posted to ask if you had resolved this since I was facing the same issue, but then deleted my post when I was able to get it working. Sorry, I didn't mean to initiate a flurry of activity in such an old thread.
My scenario is I created a new GOS service entry in table SGOSATTR using transaction SGOSM. My new service uploads attachments to an external document management system via a call to a RESTful web service. The class I use in the SGOSM entry is a custom subclass of CL_GOS_SRV_URL_CREATE.
I resolved this issue by taking a look at what CL_GOS_SRV_URL_CREATE does in its EXECUTE method. The key bits to refresh the GOS Attachment List with the new attachment are...
raise event commit_required. " if SGOSM has the commit flag checked
raise event service_succeeded
       exporting eo_service = me.
These events tell any subscribers to go do their thing-- which in this case includes a refresh of the GOS Attachment List. So in the EXECUTE method of my custom subclass, after I call function BINARY_RELATION_CREATE, I raise these events...
CALL FUNCTION 'BINARY_RELATION_CREATE'
   EXPORTING
       obj_rolea     = gs_object
       obj_roleb    = rel_doc
       relationtype = 'URL'
   EXCEPTIONS
       OTHERS       = 1.
CASE sy-subrc.
   WHEN 0.
       MESSAGE s043(sgos_msg). " The attachment was successfully created
       RAISE EVENT commit_required.
       RAISE EVENT service_succeeded
             EXPORTING eo_service = me.
   WHEN OTHERS.
       MESSAGE s042(sgos_msg). " The attachment has not been created
ENDCASE.
I hope this is helpful to you even though your initial implementation was a while back. Thanks for replying to my question though!!
Cheers,
Amy

Billing due List - Net amount not showing for bill type F2

Hi
Could someone please advise me why the net value is not showing on the billing due list for F2 billing types ?
It is showing for L2, G2 and RE billing types
Many thanks for your help and advise
Tony

Hi
KIndly check the oss note 445763 and the report RVDELSTA
if the above is not working then kindly use the below logic with the help of ABAPer to update the same
TABLES: VBFA.
SELECT SINGLE * from vbfa where VBTYP_N = ' ' and vbelv = ' '.
if sy-subrc = 0.
UPDATE vbfa SET PLMIN = ' ' where vbelv = ' ' and vbtyp_n = ''.
endif.
Regards
Damu

Dunning List Not Showing for Old Run

Similar Messages

Maybe you are looking for