Dunning Split Text Elements

Hi all,
hope sb can help me.
I'm creating a dunning form with sapscript. So I use the text elements for the dunning levels.
Is it possible to use a certain text per dunning level before and after the line items?
Like This:
Dear Customer,
Dunning text 1 for dunning level 1
Invoice 1   Amount 1.000.-
Invoice 2   Amount 2.000.-
Total                     3.000.-
Dunning text 2 for dunning level 1
Sincerley
Is this possible? How?
Thanks in advance
Philip

Hi
Yes it can.
U need to create two distinct texts and call them:
the first one before and the last one after the main text: u can use the statamente INCLUDE in your sapscript
Max

Similar Messages

Smartform splitting footer text elements

Hi,
I am using text elements for printing gross / net totals in the Main window -> Table -> Footer. Now problem I am facing is all the set of elements are breaking from page to page. I want it print in one page with out any page break. How should I do that. Please suggest.
Thanks
Ram

Depending on what system you are in, you may be able to check the Page Protection checkbox in the Table node's Output Options tab. (I'm in 4.6C and this option is not available, but it may be available in your system).
Or you can try checking the No Page Break checkbox in your Line Type definition.

Problem with text element

i get the data from text element i.e is from so10 i should display data in the footer window if the exceeds the footer window it should get display in the bottom of the next page how to split according to number of characters

Hi,
You can create secondary window and display after main window on both FIRST and SECOND page( and call pages expicitly if main window data does not cross FIRST page) with minimum height( 5 MM) and that way you can spread the SO10 text across pages.
BR
Dep

Smartforms text element alignments

Hi Experts,
In my text element in smartforms, I need to provide some fixed space between two columns as below.
   txt1                                   txt2
123456.00                         $6789.0
But if value in coulmn1 is nil, then column2 goes to left i.e the alignment is disturbed as below:
txt1                        txt2
                         $67898.0
I cannot put template as i need to provide page protection.
Pls suggest.
thanks
Dan

Hi,
U define a paragraph format in SMARTSTYLES with 2 TABS, then print the variables (text1, text2) with that Paragraph format.
Eg:
P1 &text1&,,&text2&
The 2 comma's respresent a TAB, by doing like above it will freeze the space for each variable.
OR
define a template, split into 2 columns...drop Text1 in column1, text2 in column2..
Hope its clear
Regards,
Pavan

In Footer text elements are spliting in smartform

Hi,
In smartform, I am using text elements for printing gross / net totals in the Main window -> Table -> Footer. Now problem I am facing is all the set of elements are breaking from page to page. I want it print in one page with out any page break. How should I do that. Please suggest.
Thanks
Ram

Hi,
In the footer text , in the output options tab ..there is a check box "Page protection".. Check that..
Documentation for "Page protection"
In some cases you may want to avoid that text is divided by a page
break. Therefore, you can protect text sections with a page protection.
Thanks,
Naren

Issue with if condition in smartform text elements

Hi all.
iam having a problem in smart forms
itab has 3 fields
id matnr werks
1 a p1
1 b p2
1 c p3
2 b l1
2 c l2
3 q u1
3 l u2
i neead output like in the smart form
-id = 1-
a p1
b p2
c p3
-id = 2-
b l1
c l2
-id = 3-
q u1
l u2
I have aloop in main window
itab into wa_itab.
then i have program lines
iam writing any perform statment insted iam write the code in here
input paramters wa_itab-id
output paramters id
i declared id type zabc-id under global data in global definations
CLEAR : ID.
ON CHANGE OF WA_itab-ID.
*BREAK point.
ID = WA_ITab-iD.
ENDON.
after the program lines i have a text
/: if &id& ne ' '.
---id = &id& ---
/: endif
&wa_itab-matnr& &wa_itab-werks&
now i see the output
-id = 1-
a p1
-id=- i don't need this (&id& has no value)
b p2
-id=- i don't need this
c p3
-id = 2-
b l1
-id=- i don't need this
c l2
-id = 3-
q u1
-id=- i don't need this
l u2
I checked my code if two items have same id the id has no value and you can see the output also
but for some reason its still goinng into the if condition
And also is there away that i can debugg my text elements like in scripts. my break point doesn't take me to the text elements
Thanks

1. Move only the ID into one internal table say i_id,
2. Now in your smartform, create a table and loop at i_id into wa_id.
3.Print your ID in a text, &wa_id-id&
3. Now in main area of the table Create a loop with the internal table you mentioned above with 3 elements, say, i_data into wa_data give CONDITION as wa_data-id = wa_id-id.
4. Print your other values &wa_data-matnr& &wa_data-werks&
5. outside main area, clear the work areas.
This should work fine as i use the same logic in one of my current developments!!!

Text element is not getting printed in the output

Hi all,
I'm trying to print address from table KNA1in address window through a text element.
The corresponding code being :
In Delivery Prg,
Data : lv_kna1 type STANDARD TABLE OF kna1,
          lv_adr6 type STANDARD TABLE OF adr6.
DATA : WA_ADR6 TYPE ADR6.
SELECT SINGLE * FROM KNA1 WHERE KUNNR = VBPA-KUNNR.
SELECT SINGLE * FROM ADR6 INTO WA_ADR6 where ADDRNUMBER = kna1-adrnr.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'DELIVERY_ADDRESS'
   WINDOW                         = 'DELIVADR'
and calling the same text element 'DELIVERY_ADDRESS' as follows in the Script:
/E           DELIVERY_ADDRESS
/:           IF &LV_KNA1-TELF1& <> &SPACE&
IL           Tel.: &LV_KNA1-TELF1&
/:           ENDIF
/:           IF &LV_KNA1-TELFX& <> &SPACE&
IL           Fax : &LV_KNA1-TELFX&
/:           ENDIF
/:           IF &LV_ADR6-SMTP_ADDR& <> &SPACE&
IL           E-mail : &LV_ADR6-SMTP_ADDR&
/:           ENDIF
But,this text element is not printing in the output.
Any pointer on this would be of great help.
Regards,
Vamsee Priya.

yes, it is.
I'm trying to get the e-mail address from adr6 table with the corresponding address number from table kna1.
so I created two tables as below:
Data : lv_kna1 type STANDARD TABLE OF kna1,
         lv_adr6 type STANDARD TABLE OF adr6.
DATA : WA_ADR6 TYPE ADR6.
SELECT SINGLE * FROM KNA1 WHERE KUNNR = VBPA-KUNNR.
SELECT SINGLE * FROM ADR6 INTO WA_ADR6 where ADDRNUMBER = kna1-adrnr.
now, I'm trying to fill e-mail adress from lv_adr6. but the problem is lv_adr6 is not getting filled.
data is coming to work area wa_adr6.
SAP is not allowing me to write the below statement:
SELECT SINGLE * FROM ADR6 INTO LV_ADR6 where ADDRNUMBER = kna1-adrnr.
Now, will any move-corresponding statement from work area to its table works?? Is that logically correct??

Text element not gettin refreshed in smart form

Hi
Text element does not get refreshed in the smart form preview.
I have a selection screen on which i have a few selection parameters and three application
toolbar buttons. "Save" , "Preview" and "Print". At the end of selection screen I have a
button "text" which when clicked takes me to the text element editor(FM 'TEXT_EDIT' )
I have to enter a project number on the selection screen, enter all other details and
then click on the "Text" button. I would then change /edit some text etc and come back
to sel screen. Now i click on preview , the smart form shows up and the text gets dispalyed
with the modified text.
I am passing the text name by appending "sometext" + project number to the TEXT_EDIT
and while eiditing and as a parameter to the smart form. In the smart form i have given the variable in the "include text".
Now Herez the problem.
I am still in selection screen and clik on the "text" button and it takes me to the
text editor. Now i add more lines, save and come back. Now i clik on preview
button and it displays the old text data.
When i come out of the transaction and renter , clik on the preview it displays data
correctly. Now if i repeat the steps
1.edit text button , add a few lines
2.preview button, shows data as entered in step 1.
3.edit text button, add few more lines
4.preview button .. the text displays is from step 1 and not 3.
I am not sure if this is lot of info for anybody to write an answer straight away but
if u need more info i can provide. I can do a read_text in the smart form but its toooooo
much of a pain for the data i need to display. million adjustments to be taken care of.
What could be the problem ? I have given all the basic settings like save parameter
in edit_text fm , checked all the print preview options in sdn.
Here are my questions
1. Why is the text element not getting refreshed.
2. After a form is displayed for preview , will it store anywhere in the buffer ? if yes
is there any method to clear it ?

Hi,
The problem is not with text elements, it might be your size of window which you are using to display the text elements. Check your window size and modify that accordingly.
Cheers,
Bujji

Text element assigned to select options not showing

Hi guys,
We have a problem in shaowing the text assigned to the select-options...
When we run the program the text element ssigned to the select options is not showing instead the element name is shown.
The original language is german, and it wont show the english word we appended to as text element for select-options.
example:
AUART insteat od blocked order
How can we show the text elemen when we run the program?
Thanks!

Hi Mark,
Go to the program text elements and select the Selection Texts tab,
There you fill find the select option for AUART and the corresponding text maintained.
You need to maintain translations for this text entered.
Chose Goto (in menu bar) -> Translation
Then maintain translation in English.
Regards,
Aditya

Text elements not centered anymore once project goes live

Hi guys,
I've discovered Edge Animate a few days ago and I really love that it looks and feels a lot like After Effects - you should exchange and implement some functions of EA to AE (i.e. the curves easing options) & vice versa though
What I went through, until know
First of all, I am a Worpdress user using a responsive theme and the Edge Suite plug in.
I've created a typo animation using a custom licensed web font and it took me a while to get it to work properly - the web-kit generated by the myfonts.com kit builder didnt' work with EA, so I had to let fontsquirrel create one instead. Now, the SVG font file gets exported upon export, but the EOT, WOFF and TTF files don't - not sure if it's a bug, but it's an easy thing to copy the files via FTP to the "../uploads/edge_suite/project/..." folder in order to fix this.
My Problem
After uploading the animation to my server via the Edge Suite plug in, approx. 50% of the text elements are not in the right place anymore. The affected elements are all offset by a fixed amount of pixels vertically, while they actually should be centered. When I run the HTML file of the exported web animation locally, everything's fine though.
The problem occurs in Chrome, Safari, Firefox and on the iPhone.
Has anyone experienced a similar issue?
Will

It seems like it is related to Wordpress or the Edge Suite plug in.
HTML
I've uploaded the animation (using web publishing) to a folder on my server, and everything is fine.
Wordpress
I have analysed the code of the animation being rendered on my Wordpress site, but the CSS coordinates all correspond to the parameters inside EA.
I've also installed the Edge Suite plug on a different Wordpress installation (a complete different site) of mine, and the results are even worse. It seems like the origin of some elements is being tossed around space.
That said, I'm clueless.

How to call new window and text element without changing print program

Hi Friends,
I have requirement like this . i have a standard print prog and custom form. i want add 2 to 3 extra windows in the form and i have to print some data. but how can v do this with out changing the print program. i know that to pick new fields through subroutines. but how can v call new windows and new text elements with out changing the print program.
usually in the print program we write as follows.
write_form
window = 'HEADER'
textelemtn = 'HEADER'
can we accomplish this one also through subroutines or any other way is there.
can any one pls suggest this.
Thanks in advance.
Rahul

u copy the standard print program and make custom program.
write your own codes in it.
assign this program in the place of standard print program.
Reward points, if helpful.

E-Recruiting: New Text element on WebDynpro page of External candidate

Hi,
I have a requirement to add a new text element on the personal data tab of the candidate profile. I have tried this through application configuration method, but the existing Text elements are not sufficient to accomodate the text matter that i need to insert.
I want some additional elements where they can accomodate my new text.
Is there a possibility of doing this without making the compeonent a 'Z' one?
Thanks,
Suresh

Hi Suresh,
Yes there is one possibility to do this .After you accomodated the new text thru the component config and
if you are still left with the text which needs to be added then create an enhancement and add an text element and bind it to the attribute just below the text element required and in the modify view method of the view bind the text to the attribute.
All this has to be done thru enhancement in the std component.
Thanks & Regards,
Dipu.B

Smartforms,How to display different standard Text in a Text element.

In smartform,if I want to according to the different conditions,display one of the serveral different standard Text objects which all maintained in SO10 in a same text element,how to do it?
if i put them in serval text elements, each condition only display the corresponding text element,but the text content can not display in the same position.
Is there anyone can tell me?
thanks.

use Alternative to control it no problem
for example you want to display the different SO10 to same position TEMPLATE's row 1 col2
TEMPLATE1
Alternative case1
YES
INCLUDE TEXT1(display SO10) [set output option line1 column2]
NO
Alternative case2
YES
INCLUDE TEXT2(display SO10) [set output option line1 column2]
NO
Alternative case3
every case your SO10's text is always display at line2 column2
just try to test it ,you can know

How to print a text of type text element and include text in same line

hi,
I am working on forms,
i have to display like this in the form
1.RFQ number, 2.Header text
explanation for numbers
1. The RFQ number is displayed using a variable so the text type is Text Element
2. Header text, has to be got form the standard text , so the text type is include text.
how can i print both in the same line.

Hi ,
You can use a charecter variable whos length >= length of RFQ no + Length of Header string .
Concatenate both in this variable. And print the variable.
Pls reward if useful.
Laxman

How to color the text elements in script?

how to color the text elements in script?
byeeeee
plz send the answers

Hi,
Please go through my blog to know how to do color printing in SAP scripts.
White Paper on 'Color Printing in SAP Scripts'
Regards,
Sireesha Ch

Dunning Split Text Elements

Similar Messages

Maybe you are looking for