Dunno how to port forward. Can't play online game (WRT54GS)

I'm having trouble creating and joining games for a game called Starcraft. I've been to many forums and a couple tech support people told me the problem may be with my security settings with my router. I know the correct port for the game but I'm not sure how to use this information to help me play my games. Can someone please help me? I'll provide more information if needed. Thank You

go to any comp. that is online. On that comp. open internet explorer and in the address bar type http://192.168.1.1. It will ask u for username-password. Dont type anything in the username but in the password, type admin. On this page, click on application and gaming tab, and under that click on the subtab, port triggering. Under the appln name type any name, for both start ports and end ports enter the 1st port no. u have and continue doing the same for remaining port nos.
Linksys Setup CD said "Use Win XP or better"
So i installed Linux

Similar Messages

  • Can't play online games but NAT is open and ports are forwarded correctly. What now?

    Hi,
    I have a DSL modem/router from Windstream that is hooked up to a linksy WRT160N which is then wired to my xbox 360. Now I have had problems in the past with the modem/router interfering with the WRT and creating a Strict NAT type. I have fixed that by changing the routers IP address to 10.10.10.1 (recommended by a linksys technical support person) So, now I have a static IP address setup for my 360 and opened all the ports for that and the games I play online but I can't find a game. It just continual cycles in limbo land and I never get a game to play. Is there anything else I need to change in order to fix my issue. Any advice will be greatly appreciated. 
    Thanks,

    Please follow the below mentioned settings this should fix the issue for you.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 10.10.10.1 and press Enter...
    Leave Username blank & in Password use admin in lower case...
    On the set-up tab change the MTU Size to 1365 and click Save Settings...
    Click on "Administration" tab and disable the option UPnP and click Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
    IP Address :- 10.10.10.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 10.10.10.1...
    5) Also assign the DNS Addresses on the Xbox
    Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
    IP Address: 10.10.X.[last part of ip in your device]    e.g. if static ip given to the device was 10.10.X.10 get the last part and put that to the empty box.

  • 100% packet loss and I can't play Online games

    Recently I just got cable installed and the Internet works and it connects to my Xbox one but I have 100% packet loss and I can't play any online games or apps on my phone. Can someone please help me out as I have waited about 2 weeks to get it working!

    hi AireVuqe101 
    I'm referring your post to our Social Media Tech Team for some further assistance. 
    You may not receive any contact from them until Monday, so if you need further assistance in the meanwhile, we do have a 24 hour Technical Support team who can be contacted by either calling 133933 or via Live Chat http://tel.st/gq6m
    Regards

  • Can't play online games as Ping is so high

    Hi all,
    My connection has never been the fastest however it was always good enough and being an ardent TF2 fan, it was more than capable of supporting online games.
    Recently though, gaming has become impossible as my ping is northwards of 400 which means TF2 just stutters & jitters.
    Here are my stats as of today...
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 04:59:12
    Downstream:
    5.938 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    5.8 dB / 22.0 dB
    Line attenuation (Down/Up):
    44.8 dB / 25.0 dB
    Output power (Down/Up):
    19.9 dBm / 12.2 dBm
    FEC Events (Down/Up):
    11872 / 52
    CRC Events (Down/Up):
    11 / 10
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    434 / 6
    Error Seconds (Local/Remote):
    8 / 7
    1. Best Effort Test:
    Download speedachieved during the test was - 1609 Kbps
     For your connection, the acceptable range of speeds is 600-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :6080 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 5000 Kbps
    2. Assured Rate Test:
    Download speedachieved during the test was - 1192 Kbps
     For your connection, the acceptable range of speeds is 576-600 Kbps.
     Additional Information:
     Assured Rate IP profile on your line is - 600 Kbps
    As I say, this is a recent degradation in service and I'm not sure how to go about resolving it.
    How do my settings look, anything to go on there?
    All help much appreciated.

    Well, it's one week on and things are worse than ever. TF2 is unusable and reporting a ping of 400+
    http://www.speedtester.bt.com/
     Download speedachieved during the test was - 2415 Kbps
     For your connection, the acceptable range of speeds is 600-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :5792 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 5000 Kbps
    Download speedachieved during the test was - 1501 Kbps
     For your connection, the acceptable range of speeds is 576-600 Kbps.
     Additional Information:
    Assured Rate IP profile on your line is - 600 Kbps
    I've copied this to David Moon at the mods. Anyone have any idea what I can do next?
    Thanks.

  • I can't play online games and some websites are not responding, i can't even check my emails

    im having problems with online games, and when i go to Firefox help,
    i get this msg: Warning: You're using an insecure version of Firefox. To keep your computer and personal information safe, please update to the latest version of Firefox.
    but i have the latest version already...
    and when i check my plugins...it's blank...it doesn't show anything...a few days ago, i was able to update my plugins, but today, it's blank

    hi AireVuqe101 
    I'm referring your post to our Social Media Tech Team for some further assistance. 
    You may not receive any contact from them until Monday, so if you need further assistance in the meanwhile, we do have a 24 hour Technical Support team who can be contacted by either calling 133933 or via Live Chat http://tel.st/gq6m
    Regards

  • I'm connected to the Internet but I can't sign in on Skype or play online games?!

    My parents changed the channel for the BT home hub and I am online the wifi config is all green but I can't play online game or Skype as it says I'm offline?! I have gone on advanced settings and updated my mac and restarted it but still no working but it works fine on my phone! HELP!

    Am a newbie but somethings may work here, Go to dock preferences and to network and to your airport connection window.
    You have a green light signal in network status window? If it is yellow or red it is unavailable. If your connection is full of traffic, this may effect connection.
    In window you may need to type in optional search domains. Your provider should tell you this no one else~ They would also walk you through your connection failures. If it is yellow and you connect to your provider's router and don't have your own router, this number may not appear in your connection information. You need to tell them their router is down so they can fix it. They may not find out if pings come back. Pings may also be cached (I am not sure but it might) so it may take them a while to find out if you don't tell them. I would call your provider. Maybe empty your preferences in your browser. You may have cookies or garbage to empty there. Use another browser.
    iMac   Mac OS X (10.4.10)  

  • How to port forward?

    I can't figure out how to port forward my Minecraft server.
    Help?

    The steps are listed here.. for aebs but same difference.
    https://discussions.apple.com/message/16689298#16689298
    I would use the 5.6 utility as the 6.0 or 6.1 in Lion is a dog.
    http://support.apple.com/kb/DL1482
    The TC has to be the main router for this to be relevant. If you have another router or double NAT.. you will need to port forward on the main router and eliminate double NAT.

  • How to port forward to allow access to ip camera

    Hello. My ip camera is set to http://10.0.1.11:8000. Can you assist with port forwarding, so I can access this camera from outside of my home network? I have the most recent Airport Utility and Time Capsule. Thank you.

    I did find two posts that explain in exact detail how to port forward.. did you not read them??
    Here. I will give it to you by copy and paste so you don't even have to look.
    Start the AirPort Utility (in lion download and use 5.6 not 6) > Select the TC
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, leave the default; this will change to "Custom" once you start entering port values.
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8000) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
    In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
    Click on Update.
    To connect to the shared Camera from a remote location using a Mac or PC:
    Start your favorite web browser.
    Enter the dtdns.com-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://www.mydtdnsdomainname.com:8888

  • How to port forward a non 10.0.1.X IP Address

    Is there anyone who could tell me how to port forward a 10.71.0.1 address since it only lets you use 10.0.1.X

    The normal way that you would set this up is the same as with a hotel Ethernet connection.
    Configure the AirPort Express to "create a wireless network" in Bridge Mode and allow the school's router to provide the IP addresses. In Bridge Mode, the Express will pass through the IP address information seamlessly to connected devices. All ports are already open. Everything will be on the same subnet.

  • How can I play films/games etc on my iphone on my TV?

    How can I play films/games etc on my iphone on my TV? What Wires/cables do I need? I understand it depends on TV but do I need cable for video and also a cable for sound??? Please help, thanking you.

    You need one of the Apple AV Cables:
    Composite: http://store.apple.com/uk/product/MB129ZA/B
    Component: http://store.apple.com/uk/product/MB128ZA/B
    Note that with this cable, you can output videos and photo slideshows, but not games, etc. - it doesn't show everything on the screen, only outputs videos and photo slideshows.

  • How to Port forward your router via browser

    I Am having trouble port forwarding 19132 and I tried using airport extreme to port forward but everyTime I connect using my external ip it just fails.
    i Have port forwarded the port, and I did it correctly, hence I watched a few videos before and after. so I need to know how to port forward 19132 via browser.
    i Learned how to open the the config of the router via browser, or so I thought. I need to allow google access to my network, but I don't know how.
    please help.

    This is for Apple routers which do not use browser setup.. you must use the airport utility for any setup.
    There is particular advice by the section GURU.. Tesserax on how to port forward in apple routers.
    Finding the tips is now an exercise though.
    AirPort - Port Mapping Basics using AirPort Utility v6.x

  • Open ports on new airport extreme to play online games

    hey, i have the new airport extreme and i wanna play online games.
    how do i open ports with the utily that came on disk.
    i have no clue how to configure it.
    i tried in bridge mode, but than the airport starts flashing amber and other users in house wanna surf on the net aswel.
    kind regards

    Airport Utility -> Manual setup (Cmd+L)
    Internet -> NAT
    Enable a default host
    Then in Internet -> DHCP
    permanently assign the default host IP to the machine you're going to play the games on.
    This is what other routers call the "DMZ" address. Be sure to run a firewall on that machine!

  • Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.

    Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.It mainly seems to be with games.

    RE: "P.S. I  found it aggravating that I couldn't copy and paste text  here, it wanted me to insert as a link or an image, how do you insert plain  text?"
    I take it you tried using the "right click" menu?   That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key  and while holding it down, press the "V" letter  key.
    CTRL + C = COPY
    CTRL + X = CUT
    CTRL + V = PASTE
    HTH,
    Ortho_Fan

  • Can i play pogo games on a new mac ?

    can i play pogo games on a new mac ?

    Yes,There Are Ways You Can Play Windows Games On A Mac,It`s Called The W.I.N.E. Project And The WINE Project Allows You To Operate Windows Programs On A Mac And Linux System.Remember That The WINE Project Can Be Unstable At Times,And May Cause Your Mac To Freeze Up.The Best Way To Play Windows Games On A Mac Is By Using Something Called VMware Unity.It`s An Emulator That Can Emulate 3D Windows Games.Below Is Some Instructions On How To Get It And Set It Up.
    -------VMWare Unity
    1.Go To The Official Vmware Website And Go To The Vmware (Mac) Section.
    2.Find The VMware Workstation For Mac And Download It.
    4.After Downloading VMware,Install It.
    5.Open Vmware Workstation
    6.Before You Create A New Virtual Machine,You Need To Have A Clean Copy Of Windows XP Or Higher.
    7.After That,Create A New Virtual Machine That Has Enough RAM And CPU To Emulate The Game You Want To Play.
    8.Start The Virtual Machine And Install Windows.
    9.After Installing Windows On The Virtual Machine And Your On The Windows Desktop,Install The VMware Additions.
    10.After That,ALWAYS RESTART THE VIRTUAL MACHINE.
    11.Install The Game You Want,Have A CD or ISO Image.
    12.After Installing The Game,Start The Game In The Emulator And Look For A Button That Says "Unity Mode" And Click It.
    13.After That,All The Applications You Were Running In The Virtual Machine Will Go Right To Your Mac Dock And You Can Play The Game Right On Your Mac Desktop.
    14.When Your Finished With Your Game,Close It And Open The Main VMware Application And Click "Stop Unity" And It Will Restore All Programs To Virtual Machine Desktop And There You Can Power Off Your Virtual Machine.
    Vmware Is Way More Stable Than The WINE Project And I Suggest Trying That.If You Need Some Help With This On Your Mac Then Add [email protected] To Your Contacts And I Can Help You Set It Up On TeamViewer.I Hope This Helps And Tell Me If It Does!
    -Michael Phillips

  • Can I play the games that I purchased on my ipad on my imac?

    Hello,
    I was wondering if I am able to play the games that I purchased on an older ipad on my iMac that I now have?   If, I can how do I get the games downloaded from the ipad to the iMac onto my iMac?  Any help that someone would be very appreciated!
    Thank you,
    donna

    You can't play iOS games on desktop computers - there aren't iOS simulators for casual people.
    Nevertheless, some games (Chopter 2, Angry Birds etc.) have a desktop (OS X) version of the same game. Some can even play multiplayer with the iOS version. They, generally, aren't very pricey either.

Maybe you are looking for

  • Trying to run a bat file from oracle

    I have followed these steps, see bottom for results, everything is valid but the bat file does not run???? PLease need your help. Doug CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "getbatx" AS class getbatx //class pdfopen public static void execm

  • Saving files as .jpg, not .eps?

    I've moved up from CS5 to 6. Always before able to save images as .jpg. Now on 6, files are saved as .eps? Why is that and how can I save as .jpg instead?

  • Why am I getting this error message when I try to open a photo in Preview?

    I am getting the following message when I try to open a photo in Preview. I have searched for possible solutions and nothing works for me. I have always used Preview to edit photos.

  • Taking cluster disk offline made all other resources in the group to go offline.

    Hi, We have three node windows 2008 R2 failover cluster. When we tried to take one of the cluster disk offline from a application and services, it made all other resources in that application and services to go offline even though there was no depend

  • Querying EUL for Workbooks That Use Specific Folders

    I have not been able to find the proper setup for this task. In Discoverer Administrator, if I click on a folder|click delete|impact, the workbooks that are displayed do not agree with the workbooks returned if I query the EUL. Does someone have a go