Duplex Printing for HP Color LaserJet CP4005dn Setup

How can I get my duplex printing to show up/work from the printer pop-up menu. Have installed all HP CP4005dn drivers. Installed the printer with all installable options. Printer works fine except no duplex print options. Have followed Mac Help's "Displaying a printer's special features when you print" to the letter. Nada. Have UNinstalled the printer. Downloaded all Mac updates. Downloaded all HP updates. Have reinstalled the CP4005 printer with intallable options. Still no duplex print options. Where is the miss? Why can't I get the duplex to function?

Have you taken a look to the configuration of the Printer? I have a HP 2340 with duplex and to configure it I have to do the following:
On the Preferences Pane, click on Printing and Fax or open the Printer configuration Utility. In any case, click on the printer and choose "Configuration of the printer" (in the Printer utility this is in the pritner menu). Then you will see information of the printer... May be there you have an option to activate the duplex... In may case there is a checkbox.
But may be you have done this...
Bests,
Álvaro

Similar Messages

  • How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

    How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC  using windows 8?

    Thanks for your reply.  
    Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
    http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
    Drive productivity and save paper, using automatic two-sided printing

  • Duplex printing with HP Color Laserjet 4650dn

    Dear all,
    I wanted to print the handouts of a Powerpoint presentation (Office for Mac 2008, v12.2.5), but could not get a double-sided copy. The printer (HP CLJ 4650 dn) is installed with the OS X 10.6.4 embedded drivers etc. as HP CLJ 4650. Works fine otherwise.
    The settings for the printer in System Preferences/Print Fax/General indicate that I apparently have a driver version 16.4. By accessing the Printer Webpage I have set the duplex option ON and checked all the other options for there settings. As far as I know it seems correct.
    I have ticked the box Duplex Unit in System Preferences/Print Fax/Driver.
    However, when I want to print the slides/handouts and open the print window I can only see Manual Duplex as an option in the drop-down menu Copies & Pages. No straight forward Duplex Printing or Automatic Duplex Printing option whatsoever of which the printer is capable.
    No problem with the two remaining MS Windows Vista PC's, which frustrates me.
    Have I missed something? Or done something wrong/different?
    If anyone has a suggestion I would be grateful.
    Kind regards,
    John Keasberry

    Have you taken a look to the configuration of the Printer? I have a HP 2340 with duplex and to configure it I have to do the following:
    On the Preferences Pane, click on Printing and Fax or open the Printer configuration Utility. In any case, click on the printer and choose "Configuration of the printer" (in the Printer utility this is in the pritner menu). Then you will see information of the printer... May be there you have an option to activate the duplex... In may case there is a checkbox.
    But may be you have done this...
    Bests,
    Álvaro

  • HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

    I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active.  Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue. 

    This printer doesn't seem to be supported in ML:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
    You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
    Hope this helps.

  • Duplex printing for LaserJet Pro 1100

    Directions for manual duplex printing for LaserJet P1102w

    Since this is not an auto duplex printer, you will need to go into your printer properties and set the allow manual duplex check box. Once you have set it there it will duplex all the time.
    Start menu >Device and Printers Folder > Right click on the printer > choose printer preferences > finishing tab (I think that is what it is called, if not look for the tab that has...print on both sides (manually) or allow manually duplexing (Sorry, I don't have this printer hooked up to a test box or I would get you a screenshot )
    If you want to only duplex certain jobs, then you can do this through the application at the time you pick your printer by selecting printer properties (located under your printer selection button) and setting it for only that one job.
    Open application > File > Print > Printer Properties > finishing tab  (steps are the same as above)
    Just remember...
    Box checked = duplex (default option so this should already be set unless you have unchecked it)
    Box unchecked = not duplex
    Last word of caution on these instructions...you may have some variation as I am going off my memory here....my printer is not hooked up.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

    My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
    It displays "No AirPrint Printers Found."
    Same thing for iPhone 5S iOS 8.2.
    Both iPhone and printer on the same wifi network.
    I tried printing from different applications. AirPrint does not work.
    I tried turning off and back on, reset, printing from different applications, ...
    iPhone 6 prints through HP Wireless Direct printing.
    Sony laptop works via wifi.

    Hi mtotonji,
    Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
    Sincerely,
    - Brenden

  • Printing photos with Color Laserjet CM1312. Need proper printing software.

    I'm trying to print photos from my Color Laserjet CM1312 multi-function printer.
    I used to have a Photosmart inkjet, and tried to use the photo-printing softthat came with that printer, as I really like it. But that must have been designed just for ink-jet printers because the printouts end up way too heavy on ink density, to the point that some of the ink is actually scraped off during the printing.
    What software should I be using for the color laserjet?
    I don't need editing tools as I have Photoshop ... just printing tools.

    OK here am I again.
    as mentioned before I created an bogus printer with:
    lpadmin -p test -v file:/dev/null
    verified the presence of the printer;
    lpstat -p
    $ lpstat -p
    printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
            reason unknown
    printer hp930c is idle.  enabled since Thu 31 Jan 2013 11:30:21 PM BRST
    printer test is idle.  enabled since Fri 01 Feb 2013 02:54:57 PM BRST
    At first "test" printer was disabled for an uknown reason.
    tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
    tried to print;
    echo test | lp -d test
    result:
    $ echo test | lp -d test
    lp: Destination "test" is not accepting jobs.
    I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
    Conclusion: how can I modify this status to make the printer accept jobs?

  • SAP Device typr for HP Color LaserJet CM2320fxi MFP

    Hi Experts,
          What would be the best suited SAP device type for HP Color LaserJet CM2320fxi MFP?
    Regards,
    Leela.

    Hi Leela,
    You may get the details from below HP link
    http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
    HP Color LaserJet CM2320n
    4.5A & higher
    ZHPLJCM1
    Hope this helps.
    Regards,
    Deepak Kori

  • Can't print with HP Color LaserJet dn2605

    I haven't been able to print my HP Color LaserJet from Early 2008 Mac Pro using 10.9.4.  I have attempted to print on the network and USB to no avail.  I have deleted the printer, reset all printers and scanners.  Once I delete or reset the printers, I always have to recycle/rebounce the printer so it can be found.  Once found and I select it by the "Use" drop down, there are two(2) HP Color LaserJet 2605 profiles.  I can select either one and sets-up the printer.  Once I attempt to use the printer, the print job goes to the queue and few minutes later the printer starts initiating and sounds like that a paper is getting ready to move and it stops or quits.  I then receive the yellow light a problem occurs, thats all the farther it goes.  I have the latest printer driver update 19.9..  I also have reloaded the OS 3-4 times.  Here is what I receive the print queue when it fails: "Stopped - Unable to write print data: Broken pipe".

    That's sounding like a printer problem, not software.
    But just in case, try deleting the HP folder from /Library/Printers, then Reset the Printing System and add the printer again.
    OS X Mavericks: Reset the printing system
    If that doesn't work, use a browser and connect to your router, and see if you can identify the printer in "connected devices."
    (a printer that changes IP address whenever there is some change on your local net will give symptoms like that)

  • Duplex printing for smartform

    Hi,
    Has anyone worked on Duplex printing for smartform? If yes, please tell me the procedure/steps that need to be taken for the same.
    Thanks
    Regards

    Hi,
    You can select Duplex printing in th epage properties of a page (D = Duplex)
    The printer STARTS duplex printing from that page. This means that the printer triggers a pagefeed on that exact moment and starts printing on a new page. So when you have 1 page that stretches over more that one sheet of paper this means trouble. after every page the flow of the program starts a new Duplex print (thus feeding the current sheet and starts at a new page) this results in a new sheet of paper every page. this is not what you want.
    You can solve this by creating 2 pages and set their respective NEXT PAGE to each other. Page 1 you set to DUplex, pagae 2 you leave blank..
    But notice that when you select duplex printing most (if not all) printers start printing on the backside of the paper. When you use pre-printed (logo) paper, you will find that it prints the front on the back etc.
    This can sometimes be corrected (if needed) by sending prescribe commands to the printer directly.
    Good luck!
    Joris

  • HT3669 i need drivers for HP Color LaserJet CP1215

    hi i need drivers for HP Color LaserJet CP1215 pleaze

    Hi Bertl1,
    Although the HP web site says the CP1215 is not compatible with Macs, there is an open source free driver available. It is a 3-part download/install. Get ghostscript, foomatic, and foo2hp:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
    http://foo2hp.rkkda.com/

  • XP pro-64bit issue printing to a color laserjet cp3800dn

    Need help troubleshooting this issue:
    User is unsuccessful in printing to a Color LaserJet cp3800dn directly from an IP address.
    I've tried to install the 64bit version of the driver - that didn't work
    The version of XP is SP3.
    Fortunately the user can print to this printer as a network shared resource. But when I tried to assign printer by IP address--because user wants to configure double-sided printing--i get the message "local downlevel document" failed to print. And I would have to cancel it from the print que.
    I've tried to change the printer configuration to "print directly to printer" but seem to dislike that option because it freezes after selecting that option and try to print.
    I've also tried to restart the computer once after installing HP printer drives and after making modifications to printer preferences, no luck.
    Anyone encountered this issue before and have suggestions?

    Phillip -- that did seem to work. Thanks!
    One thing of note, after sleuthing it out a bit more, I realized that this happened after I was prompted by Apple's Software update to update the driver to version 1.1.1 (I think that was the number). that update seems to have broken Acrobat, so returning to the one on the Adobe site restores the functionality.
    Perhaps this will be an alert to others not to install the Apple driver when prompted, though it's easy to let that slip by.
    Randy

  • Is there a univeral printer driver for HP Color LaserJet CM1312 MFP on Windows 7 64 bit?

    I had bought a HP Color LaserJet CM1312 Multifunction Printer last year - up to now I could print out via the computer of my doughter (Windows XP), but now this computer is bugged and I would like to be able to use also my own Windows 7 64 bit Computer. Unfortunately the "Full solution" does not work at all, while there also appears to be no Universal Printer Driver for my special printer. In other words: I can´t use the printer and I am upset (HP at its best?).
    Is there any way to get a printer driver that does what it is supposed to do?
    Despaired...
    MKunst

    Have you tried downloading and installing the drivers from here?
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Windows 8 Printer Driver for HP Color LaserJet 1600

    Trying to get my printer back up and operating with the Windows 8 operating system.  I am not finding the Driver for the HP Color Laserjet 1600.  can anyone help

    The driver for this device should be available around the end of Jan. 2013. Please bookmark this site for update information.
    Windows 8 Support for Laserjet products
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Printer driver for Hp Color LaserJet 1600 ???

    I have an Hp Color LaserJet 1600 printer. Best printer i ever had.
    Where can I find printer driver ?
    Checked a few Hp and apple site and every printer inthe world except this one seem to have a driver.
    my OS is 10.8.4

    Found these by doing an easy 5 second Google search.  You should try it sometime...
    http://forums.macrumors.com/showthread.php?t=228510
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/C olor-Laserjet-1600-Printer-driver-for-Mac-OSX-10-7/m-p/2391335#M43702

Maybe you are looking for