Duplex printing for LaserJet Pro 1100

Directions for manual duplex printing for LaserJet P1102w

Since this is not an auto duplex printer, you will need to go into your printer properties and set the allow manual duplex check box. Once you have set it there it will duplex all the time.
Start menu >Device and Printers Folder > Right click on the printer > choose printer preferences > finishing tab (I think that is what it is called, if not look for the tab that has...print on both sides (manually) or allow manually duplexing (Sorry, I don't have this printer hooked up to a test box or I would get you a screenshot )
If you want to only duplex certain jobs, then you can do this through the application at the time you pick your printer by selecting printer properties (located under your printer selection button) and setting it for only that one job.
Open application > File > Print > Printer Properties > finishing tab (steps are the same as above)
Just remember...
Box checked = duplex (default option so this should already be set unless you have unchecked it)
Box unchecked = not duplex
Last word of caution on these instructions...you may have some variation as I am going off my memory here....my printer is not hooked up.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC using windows 8?

Thanks for your reply.
Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
Drive productivity and save paper, using automatic two-sided printing

How do I select two-sided printing on LaserJet Pro 200 Color?

How can I print documents with two-sided printing with LaserJet Pro 200 color printer. I have Mac )S X 10.10 Yosemite.

Hi @jleo ,
I see that you would like to know how to select the two-sided printing. I would be happy to help you, but I will need some more information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Are you using the Full Feature HP Software and Drivers or the Apple Update drivers?
How is the printer connected? (USB/Ethernet/Wireless)
Depending which printer you have and what drivers you are using, usually from the application you are printing from, go to File, Print, click on the Layout in the dropdown and you might have one also listed for Manual Duplex option, you should be able to select the two-sided setting there.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612

Very light print with LaserJet Pro CM1415

Core issue: Almost invisible printing
Product: LaserJet Pro CM1415fnw
OS: Windows 8.1 64-bit (same issue with Windows 7 and Windows Vista Ultimate - all 64-bit)
Replaced all 4 cartridges with brand hew HP cartridges even though old HP ones were not depleated.
Updated all drivers and printer firmware to most current versions.
Ran all HP diagnostics and troubleshooting including cleaning (twice).
Tried adjusting print desity to darker -- no effect at all.
Total pages printed since it was new - 2222
Even tried printing black only with no effect.
Supply status shows all cartidges registered and 100% full.
I read the other forum messages on the same printer and subject and it appears that the problem is very common, and I never was able to find a solution that worked.
This appears to be a problem with the printer itself -- possibly some sort of internal defect. Amusing that it seems to have happened about coincidental with expiration of warranty.
Is there a solution?

Hi @TereP,
I see that you are having issues with the print being very light. You already replaced the toners with Genuine HP Toners and still have the same results. I would really like to be able to help you resolve this issue today.
It may be a issue with the fuser or another hardware issue causing this.
I have provided some steps to see if we can determine what the issue is.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Run a cleaning and calibrate the printer:
On the printer touch the Setup icon, System Setup, Print Quality menu, and select the Color Calibration item.
Select the Calibrate Now option.
Then go to the Setup icon, Service Menu, Cleaning Page.
Print a Diagnostics Page to see if it is a hardware or software issue.
Go to Setup, Reports, Diagnostics Page.
Here is a picture of the Diagnostics Page.
Let me know if there are any issues with the colors printed, the alignment of the L's at the bottom corners of the page and if there are any smudges or blots on the page.
Print the Print Quality Page, it will help determine which toners are causing this issue.
1. On the product control panel, open the Reports menu.
2. Select the Print Quality Page item to print it.
● If dots or streaks appear in only one of the groups, replace the print cartridge that correlates with
that group.
● If dots appear in more than one group, print a cleaning page. If this does not solve the problem,
determine if the dots are always the same color; for example, if magenta dots appear in all five
color bands. If the dots are all the same color, replace that print cartridge.
I have provided a document to go through the steps to see if this will help resolve this issue.
Resolving Print Quality Issues.
The diagnostics and the print quality page will help with determining this issue.
Let me know the results please. You may include a screen shot if you like. Visual is always better for determining the issue.
How is the printer connected? (USB/Ethernet/Wireless)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't Duplex print from Acrobat Pro 9.3.2 to Epson Artisan 800

I can not duplex Print from Acrobat Pro 9.3.2 to an Epson Artisan 800.
I an running it from a MacBook Pro with OSX 10.6.3
I called Epson support and they could not help me.
However they suggested that I try using Adobe Reader.
Well that works OK if I choose to print the document as an image, but I would prefer to just be able to work within Acrobat Pro.
Does anyone outthere have any settings within Acrobat Pro that would enable duplex printing?
Thanks
Dunc

All this is totally different Screen (I use a HP DJ 990cse) This sort amplifies Larry's Answer:
Every Printer is setup naturally different.

Duplex printing for smartform

Hi,
Has anyone worked on Duplex printing for smartform? If yes, please tell me the procedure/steps that need to be taken for the same.
Thanks
Regards

Hi,
You can select Duplex printing in th epage properties of a page (D = Duplex)
The printer STARTS duplex printing from that page. This means that the printer triggers a pagefeed on that exact moment and starts printing on a new page. So when you have 1 page that stretches over more that one sheet of paper this means trouble. after every page the flow of the program starts a new Duplex print (thus feeding the current sheet and starts at a new page) this results in a new sheet of paper every page. this is not what you want.
You can solve this by creating 2 pages and set their respective NEXT PAGE to each other. Page 1 you set to DUplex, pagae 2 you leave blank..
But notice that when you select duplex printing most (if not all) printers start printing on the backside of the paper. When you use pre-printed (logo) paper, you will find that it prints the front on the back etc.
This can sometimes be corrected (if needed) by sending prescribe commands to the printer directly.
Good luck!
Joris

Alternate driver for LaserJet Pro MFP printer

Can anyone suggest an alternate driver for a Mac Mini (OS X v10.4.11) to print on a LaserJet PRO MFP M127fw ?
This question was solved.
View Solution.

Hi @suckerfish1,
I understand that you are looking for drivers for the 10.4 to use with the LaserJet PRO MFP M127fw. I can help you with this.
Unfortunately 10.4, isn't a supported operating system, there are no drivers available.
Here are the Supported Mac OS X operating systems: Mac OS X v10.6 Snow Leopard, OS X v10.7 Lion, OS X v10.8 Mountain Lion.
HP LaserJet Pro MFP M127fw and Color LaserJet Pro MFP M177fw Printers Product Specifications.
You would have to upgrade to 10.6 or get another Laserjet that supports 10.4.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Duplex Printing for HP Color LaserJet CP4005dn Setup

How can I get my duplex printing to show up/work from the printer pop-up menu. Have installed all HP CP4005dn drivers. Installed the printer with all installable options. Printer works fine except no duplex print options. Have followed Mac Help's "Displaying a printer's special features when you print" to the letter. Nada. Have UNinstalled the printer. Downloaded all Mac updates. Downloaded all HP updates. Have reinstalled the CP4005 printer with intallable options. Still no duplex print options. Where is the miss? Why can't I get the duplex to function?

Have you taken a look to the configuration of the Printer? I have a HP 2340 with duplex and to configure it I have to do the following:
On the Preferences Pane, click on Printing and Fax or open the Printer configuration Utility. In any case, click on the printer and choose "Configuration of the printer" (in the Printer utility this is in the pritner menu). Then you will see information of the printer... May be there you have an option to activate the duplex... In may case there is a checkbox.
But may be you have done this...
Bests,
Álvaro

HP Multicenter Printer HP LaserJet Pro MFP M127fn

I cannot get my printer to connect to my computer wirelessly and printer did not come with a USB cable. I am on Windows 7 64 bit.

HI @Janeece,
Welcome to the HP Support Forums. I understand that you will like to learn how to connect your Laserjet M127fn printer to your wireless network.
The Laserjet M127fn printer does not support wireless connectivity. I have included the Printer Specifications for HP LaserJet Pro MFP M127fn, M128fn, and M128fp Printers for reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Duplex printing with officejet pro 8000

I am using this officejet pro 8000 to print up some newsletters. When printing a two sided copy (duplex printing) something happens which changes my border setting. Printing the exact same document, but electing one-sided copy renders a perfect border. I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer. Has HP ever come up with a fix for this? I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines. This has rendered good borders on duplex prints, but diminishes the quality of the print copy. Whatcha think?

Terrible Tom wrote:
Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
Apple doesn't write the HP software.
Hope this helps.

Printer not printing cyan laserjet pro m251nw

I have an hp laserjet pro 200. The toner cartridge status says that it's 90%, just like the other cartridges, but the cyan won't print. I tried pulling the cartridge out and putting it back in, printing a cleaning page, but nothing worked.

Hello favoritepsalm1, Thank you for visiting the HP Support Forums! To get your issue more exposure I suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ I hope this helps!

Blank pages when printing to laserjet pro 200 color MFP M276nw

When printing to my Laserjet pro 200 color MFP M276nw, the pages are all blank. I have tried turning the printer off and tried unplugging and replugging. That didn't help. Pages are still blank. Any suggestions?
This question was solved.
View Solution.

Thanks Regents Professor! I just kept trying and it now works!

Duplex printing for last 2 pages only

A customer has an invoice report where they want the terms and conditions (which are 2 pages) duplexed while the report itself is not printed that way. Any ideas if this can be done using native SSRS?
Sherry

I am not sure this will work or not, but you could embed the printer code for duplex printing into your stream.
For HP printers:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-bpl02705-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#top
Simplex/Duplex operation
NOTE: This is only
applicable to duplex capable printers.
Function
Parameter
Command
Decimal Value
Hexadecimal
Value
Simplex Print
Simplex
Ec&l0S (s)
027 038 108 048 083 (115)
1B 26 6C 30 53 (73)
Duplex Print
Long-Edge Binding
Ec&l1S (s)
027 038 108 049 083 (115)
1B 26 6C 31 53 (73)
Duplex Print
Short-Edge Binding
Ec&l2S (s)
027 038 108 050 083 (115)
1B 26 6C 32 53 (73)
Long-Edge (left) Offset Registration
# of Decipoints (1/720")
Ec&l#U (u)
027 038 108 #...# 085 (117)
1B 26 6C #...# 55 (75)
Short-Edge (Top) Offset Registration
# of Decipoints (1/720")
Ec&l#Z (z)
027 038 108 #...# 090 (122)
1B 26 6C #...# 5A (7A)
Page Side Selection
Next Side
Ec&a0G (g)
027 038 097 048 071 (103)
1B 26 61 30 47 (67)
Page Side Selection
Front Side
Ec&a1G (g)
027 038 097 049 071 (103)
1B 26 61 31 47 (67)
Page Side Selection
Back Side
Ec&a2G (g)
027 038 097 050 071 (103)
1B 26 61 32 47 (67)

Duplex Printing for Officejet 5740

I recently purchased an Officejet All-In-One 5740 printer. I did not realize that automatic duplex was a default and not an option. I can't find a way to change to 1-sided print (there is no selection in Properties). Is there an allowance for 1-sided print for this model printer?
This question was solved.
View Solution.

Hi,
From the application used to print open teh Print dialog, then click on Properties / Settings / Preferences to access the Printing Preferences dialog.
Within the Layout tab set Two-Sided printing as Off, confirm the changes and try printing again.
Additionally from the Control Panel open Devices and Printersm right click the printer icon and select Printing Preferences.
Ensure the same that Two-Sided printing is disabled to ensure it is diabled by default.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Duplex printing for LaserJet Pro 1100

Similar Messages

Maybe you are looking for