Duplex Printing in Smart Form

On the back of each page of delivery note i have to print terms and conditions, I followed the below following  steps:
1.Created 2 Pages FRONT  and  BACK.
2.Set page property of FRONT page as Duplex and next page as BACK.
3.Set page property of BACK page as blank and next page as FRONT.
Note:both the pages page format are set to Landscape.
Problems:
1.For the back page even if the formatting is same as front page it is printing out of page.
2.Back Page i.e terms and conditions is Printing on the back but in opposite direction.
Please suggest.

1) What do you mean exactly?
2) Already answered many times in the forum. PLEASE SEARCH

Similar Messages

  • How to print a smart form in two diff languages runtime

    Hi friends,
    we have a requirement to print a smart form in two langauges one in english
    and other in Spanish those selection has to given by check box condition.
    pls send some stuff .
    Thanks & Regards
    Jagadeeshwar.B

    hi! Jagadesh
    1. Create two different Smartforms
    2. In Form Atributes Option -->General Attributes -->Language Tab -- there is a Optiona to select a Particular Language.( To select Language) there <b>select the EN</b> for 1st optin and <b>ES for Spanish</b>, Normally it will be in To all Language.
    3. Create a report with Radiobutton (bz Check Box have an attributes to check both the Options)
       when option1 = 'EN'.
            call form1 with EN language
      when option2 = 'ES'.
           call forms 2 with ES Language.
    Reward me if its useful.
    Regards,
    Nagulan

  • Duplex Printing w/ Quick Forms

    Is there a way to enable duplex printing with Quick Forms so that forms (such as school paper) are printed on both sides of the page?
    Thanks.
    Steve

    stestardi:  
    At this time an automated option to print duplex with Quick Forms is not available.  
    As noted, you can print on both sides manually, by printing out a quick form item on one side of a page, re-insert that page in your paper tray with the blank side down (printed side up/visible to you) and print a second quick form item on the blank side. 
    I am an HP employee.

  • One-Time Customer or Vendor Address Printing in Smart Forms

    Hi friends,
    I am using the Address Node in Smart Forms to print the Addresses in Tax Invoice Printing. How to get the address details for the One-Time Customers which is stored in the BSEC table using the same Address Function.
    (We can directly get the address details from BSEC and display it by using a separate Text Node. But the address formatting according to the recipient country postal standards will be handled only by Address Function in Smart Forms right)
    Regards,
    Riaz.

    Hi friends,
    I am using the Address Node in Smart Forms to print the Addresses in Tax Invoice Printing. How to get the address details for the One-Time Customers which is stored in the BSEC table using the same Address Function.
    (We can directly get the address details from BSEC and display it by using a separate Text Node. But the address formatting according to the recipient country postal standards will be handled only by Address Function in Smart Forms right)
    Regards,
    Riaz.

  • Duplex Printing of Adobe Forms.

    Hi All,
    In our project we are making use of adobe forms. Currently if we print the forms, then they are printed only on one side of the paper. Could you please let us know, if it is possible to provide the duplex printing option? If yes, please let us know how to achieve the duplex printing functionality?
    Thanks,
    Manohar Dubbaka.

    Hi All,
    The duplex printing of the adobe PDF forms can be achieved by setting the parameter available on Master Page of Adobe PDF.
    This option is available in Adobe Live Cycle Designer 8.0 version.
    The option is in the object view of the master page.
    Master Page->Object->Pagination->Print on Both Sides.
    Since we got this option, we did not have to change any XDC files.
    Regards,
    Manohar Dubbaka.

  • Transfer Order Printing using smart forms

    Hi All
    Our requirement is to print Transfer Order  ( WM ) for Goods Receipt & Delivery using Smart forms.
    Can we change the existing standard format (SAP script ) and use our own form(smart form ) to include some other data & print.
    If possible how to replace the SAP script to Smart form.
    Request  someone could guide in detail.
    Thanks in advance.
    Samson

    Hi
    When you create Smartform try to replace it in customizing OMLV. Not sure if it will work as it refers to Sap Scirpt in help description.
    It is also possible to write Z program for TO printing and hardcode SmartForm there.
    Regards
    Mariusz

  • Standard print program & smart form for SALES ORDER

    Hi,
    I need
    1. Print program &
    2. SMART FORM
    for "Sales Order".
    and also please let me know how to migrate and do the required changes in smartform & print program.

    Hi Sameer,
    Goto NACE tcode-> choose the application u want( like billing for invoice, PO)->output type->output type->processing routineon left side
    Here u will find the standard program name and smartform .
    Thanks,
    Reward If Helpful.

  • In Top Gap is coming after first page  in print preview (SMART FORMS)

    Dear Guru's,
                          I created the one smart forms with one main window with four secondry window in secondry window i have taken the logo,address subject and footer .
    And in main window i had taken 10-15 text  all second window and main window in my first page ,now my problem is that, in my second and third  page at upper side some gap is coming i don't want that gap in my page.
    I am thinking that gap is coming because of my other secondry window such as logo address and all but i need only these information at first page so i selected the only first page check box.
    Kindly help me how to rmove the gap from the other pages which is coming in print preview .
    thanks

    Hi,
    I think you should create a page next (then indicate first page to page next).
    In page next, you copy main window of first page and resize as you want. Moreover, you can copy secondary windows in page first to next page that your want to show.
    Hope this help.
    Thien

  • Duplex printing of landscape form

    Hello
    I'm trying to print a form on both sides using landscape format. The back side is printed upside-down. Is there any proprty like 'Flip up/Flip over' in Adobe Live Designer?
    Thank you very much in advance!
    Regards,
    Andrey

    I have found property Duplex Mode in LiveCycle Designer (Edit->Form properies->PDF Print options). It contains options Duplex Flip Long Edge and Duplex Flip Short Side, but it works when you print from LiveCycle Designer only... The form is printed always like with Flip Long Edge...
    Edited by: Andrey S on Jun 23, 2011 9:01 AM

  • Regarding Bar Code Printing in SMART FORMS

    Hi All,
    I need to print a Bar Code in the output for Material Field on Header Data.
    For this in smart styles:
    I have decalred a style Character Format: BM by choosing Bar Code Name: RUECKNR
    Then in Layout set code of Smartform i have decalred the same in following way:
    <b>Material No: &G_MAT_NO& <BM>&G_MAT_NO&</></b>
    But in output it is showing as below:
    <b>Material No: 60000001 <BM>60000001</></b>
    It is not showing any barcode for Material Number!
    Can anybody solve this issue!
    Thanks,
    Deep.

    Hi,
    Choose the style name in output options of the text.
    Click the field list on/off button.From the list of the fields displayed,drag G_MAT_NO[don't type manually] from there to text element. Then select Text editor and then in that go to -> change editor.
    Insert the character created in style ( Say BM) in that change editor. That will display the barcode for date.
    Material No: &G_MAT_NO& <BM>&G_MAT_NO&</>

  • How to print the mass printing in smart forms?

    Hi Experts,
    I have a problem, i could not found how to print the mass printing in smartforms. Can any body explain.
    Regards.
    Venkat N

    Hi,
    Check bellow maintained links
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
    http://www.sap-basis-abap.com/smartforms/smartforms-in-details.htm
    Regards
    Gaurav

  • Slow down printing speed for Smart Forms

    Hi,
    Is there any command (etc.) to slow down the printing speed of an Hp laserjet when printing a smart forms?
    I need that because when I print that smart form to fast I run into print out quality problems.
    Many Thanks

    hi,
    take print out in a dot matrix printer instead of your laser printer without changing any settings.
    Coz i tried this once, i was successfull. But, the printout will be very slow.
    regards,
    kool.

  • Sending Smart form to Printer  in SRM

    Hi All,
    I am trying to send a smartform to Printer in SRM ITS. I gave output options and control parameters . When i see the Print dialog box i dont see the Front end printers in that. Normally when we pass  LOCL we should see default printer in Print dialog.
    When i do print, spool is creating but its not printing at local printer .
    I am doing this in SRM ITS ... could you kindly any one tell me what steps need to take to print a smart form at local printer when we call form ?
    Thanks

    Hi
    Please elaborat, when you need this SMARTFORM to get triggered.
    By the way, Have you tried implementaing the following BADIs ?
    BBP_CHANGE_SF_BID                                             Smartform for E-Mails to Bidder           
    BBP_CHANGE_SF_CTR                                             Change Smart Form for Contract Output     
    BBP_CHANGE_SF_ERS                                             Change Smart Form                         
    BBP_CHANGE_SF_SC                                              Smart Form Shopping Cart Print            
    BBP_CHANGE_SF_VERS                                            Change Smart Form for Version Comparison  
    BBP_PROCESS_AUC                                               Process Smart Form with Changed Interface 
    BBP_PROCESS_BID                                               Process Smart Form with Changed Interface 
    BBP_PROCESS_CTR                                               Process Smart Form with Changed Interface 
    BBP_PROCESS_PO                                                Process Smart Form with Changed Interface 
    BBP_PROCESS_QUOT                                              Process Smart Form with Changed Interface
    Hope this will help.
    Please rewards suitable points.
    Regards
    - Atul

  • Smart Form printing witout dialog box

    Hi Experts,
    I want to print the smart form when i execute the print program witout any dialogbox asking for printer name or other details.
    I am using the following code. By using this i am not getting any dialog box, but its not printing anything.
    DATA wa_outputoption TYPE ssfcompop.
    DATA wa_controlparameters TYPE ssfctrlop.
    wa_outputoption-tddest = 'INFO' .
    wa_outputoption-tdnoprev = 'x'.
    wa_outputoption-tdimmed = 'X' .
    wa_controlparameters-no_dialog = 'X' .
    wa_controlparameters-no_open  = 'X'.
    wa_controlparameters-no_close = 'X'.
    wa_controlparameters-device   = 'PRINTER'.
    CALL FUNCTION '/1BCDWB/SF00000116'
        EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
        control_parameters         = wa_controlparameters
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       output_options             = wa_outputoption
      USER_SETTINGS              = 'X'
          v_whno                     = 'WN1'
          v_sttyp                    = 'ND1'
          v_plant                    = 'WN01'
          v_invrec                   = '1068'
          v_page                     = '3'
          v_invdt                    = sy-datlo
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
    EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5
    Please suggest a solution.

    hi pankaj,
    it looks fine, u r passing correct parameters only but just try..
    just pass these parameters:
    DATA:  ST_CONTROL_PARAMETERS      TYPE SSFCTRLOP
      st_control_parameters-device     = 'PRINTER'. "Output device
    st_control_parameters-no_dialog  = 'X'.       "SAP Smart Forms: General Indicator
    I am using the same, it is working fine,
    can u plese tell wht exactly happening.. is the dialogue is displaying or smethig else. r u calling this from only once or many time base on any conditions check once..r u passing right values..
    call this FM before calling samrtform because u will face problems in PRD and Quality.. if u r already then ignore this.
    c_formname = 'xxxx ut form name'.
    v_fm_name is type rs38l_fnam.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = c_formname
      IMPORTING
        fm_name            = v_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    CALL FUNCTION v_fm_name
    EXPORTING
    * ARCHIVE_INDEX =
    * ARCHIVE_INDEX_TAB =
    * ARCHIVE_PARAMETERS =
    control_parameters = wa_controlparameters
    * MAIL_APPL_OBJ =
    * MAIL_RECIPIENT =
    * MAIL_SENDER =
    * output_options = wa_outputoption
    * USER_SETTINGS = 'X'
    v_whno = 'WN1'
    v_sttyp = 'ND1'
    v_plant = 'WN01'
    v_invrec = '1068'
    v_page = '3'
    v_invdt = sy-datlo
    * IMPORTING
    * DOCUMENT_OUTPUT_INFO =
    * JOB_OUTPUT_INFO =
    * JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5

  • Why the control parameters changed when print smart form

    Hi experts:
      I set the control parrameters in my source code to print the smart form, I use the loop table for printing, but I found the print device changed automatically, only the frist page is ok. that means, the control paramenters lost when loop. how to solve it?
    this is my source:
    LOOP AT it_outtab INTO wa_outtab WHERE flag = 'X' .
        ssf_open ls_control_param outopt ls_composer_param.
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = lf_formname
          IMPORTING
            fm_name            = lf_fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
       IF sy-subrc <> 0.
         MESSAGE 'Call SSF_FUNCTION_MODULE_NAME Error' TYPE 'E'.
       ENDIF.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION lf_fm_name
          EXPORTING
            control_parameters = ls_control_param
            zgl_k_stru         = wa_outtab
          EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
       IF sy-subrc <> 0.
         MESSAGE 'Call LF_FM_NAME Error' TYPE 'E'.
       ENDIF.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        ssf_close .
        MOVE-CORRESPONDING outopt TO ls_composer_param.
        ls_composer_param-tdimmed = ' '.
        ls_control_param-no_dialog = 'X'.
        IF outopt-tdpreview = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.

    Hi Prabhat,
    Please check following point in your smartform design.
    1) In your smartform design, how many pages do you have? (Check the page format and margins, have a look at form painter
        as well)
    2) Check out the navigation from one page to another page.
    3) Debugg the form and check at what point the last page is been added.
    Regards,
    Amee.

Maybe you are looking for