Duplex printing of multiple copies of single page

I really like that the settings for printing are retained so you can leave it set to duplex rather than having to select it each time. Although I do get caught with not resetting the number of copies on occasion. I do a lot of printing and like to conserve paper.
The problem is when duplex is set and I print multiple copies of a single page, it prints on both sides of the paper. When printing two copies I get one page printed on two sides instead of two pages printed on one side.
I know the easy answer is reset the duplex setting. But it should print correctly regardless. Has anyone had this problem and found how to deal with it other than resetting duplex?

If these settings are in the printer driver (which they most likely are) then you'd have to contact the driver manufacturer. Perhaps there are multiple "double-sided" settings. For instance, if there is "duplex" as one option and "two-sided" as another option in the driver, then perhaps one indicates all copies will be printed double-sided even on the same page (as you're experiencing), whereas the other would print multiple two-sided copies. This, however, is very driver-dependent behavior. I'd recommend checking to see if there's an update available for your printer driver that might either clear the problem or provide a clearer option setting for the print jobs.

Similar Messages

Print out multiple copies for next page in sapscript

Hi All,
For check printing the client wants the next page with item data to be printed out twice, while the first page along with the check will be printed out on a pre-printed paper. Can anyone advice me on this.

hi,
IF &PAGE& EQ 1
"do write what all you need to print in First page
ELSE
"write what all necessary you want to print from second page onwards..By this first page will not print in Second Page
ENDIF.
IF &NEXTPAGE& EQ 0
"This Means it is last Page write footer or any comments in Last Page
ENDIF.
Prabhudas

I am unable to print multiple copies on 1 page

I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

Hi,
In order to print multiple documents on one page, you may follow the steps mentioned below:-
Press Command+p- Select multiple pages or booklet
If you are not getting these options, please send us a screenshot to better understand the issue.
Regards,
Nakul

How do I print multiple copies of a page in a PDF File?

How do I print multiple copies of a page in a PDF File? For some reason I tell it to print, for example, 3 or 4 copies of a certain page and it will only print one copy!!!

OS X 10.9.5Adobe Reader 11.0.10
I increase the number of copies to 3, 4, or 5 (etc.) but it would still only print one copy of the designated page/pages.
From: pwillener <[email protected]>
To: Caren Harris <[email protected]>
Sent: Friday, March 6, 2015 9:17 PM
Subject: How do I print multiple copies of a page in a PDF File?
How do I print multiple copies of a page in a PDF File?
created by pwillener in Adobe Reader - View the full discussionOperating system? Reader version? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262032#7262032 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262032#7262032 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Is it possible to have multiple links in single page?

Is it possible to have multiple links in single page for
linking in different slides like in a websites? My deadline is
nearing in. Adobe folks please help me.

> Is it possible to have multiple links in single page for
linking in
> different slides like in a websites? My deadline is
nearing in. Adobe
> folks please help me.
>
Add multiple click boxes to the page.
Steve
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

Printing multiple copies of 3 page BOL in Duplex mode-

Hi Gurus!
I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
Please suggest.

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

Problems printing multiple copies on 1 page in iPhoto version 9.5.1

I'm having problems printing multiple copies of a photo in my version of iPhoto 9.5.1. I've tried looking at the answers given in Macworld forums for iPhoto '09 but I can't follow them as they refer to clicking 'preferences' - but this button isn't displayed on the 'print' page. Is my version iPhoto '09 or '11?

iPhoto 9.5.1 is the most recent version of iPhoto '11, as part of the iLife '11 suit of applications. The printing dialog changed between iPhoto '09 and iPhoto '11.
The easiest way to print multiple copies of the same photo on one page is to simply duplicate your photo (from the "Photos" menu: "Photos > Duplicate" and then to select all copies at once and use "File > Print":
Then select a template and press the "Print" button.

Laserjet 4000n keeps printing (multiple) copies of first page

My LaserJet 4000n model C4118A serial no. nlqwo15293 manufactered Feb 16 1999 is conected to home LAN (bt Home Hub 5)
If I print a copy of the menu map using the buttons on the control panel I get muliple copies.
If I try to print 1 copy of a 2 page document I get multiple copies of the first page
I'm running Windows Vista Home Premium
Suggestions please
is the printer unrepairable?

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

Printing comments summary on a single page

Is it possible to print comments summaries for a document on a single page rather than on seperate pages? Even when there is only one comment per page, I cannot find a way to print all the comments on a single page. Printing "comments only" still puts them on seperate pages. It does print multiple comments on a page onto one page, but what if I want all the comments for a document onto one page. All suggestions welcome.

In the Print dialog, bottom left is a block Summarize Comments as below. Click that and adjust as needed

Print a report adapted a single page.

Hi,
I have a report in Answer that is printed on two pages.
I wish that when I choose to print the report in pdf, it is adapted a single page.
Is it possible from OBIEE?
Thanks
Sara

Thanks, I was afraid that the answer was "Publisher".
Unfortunately you can decrease the font size in the cell of the report ....
You can not edit the xml report to adapt it to the page?
If there are no official answers to this problem .... thanks a lot.
Sara

Multiple Copies of Same Page Content from Various Trays

I use 'gs' to create postscript, and 'setpagedevice' to specify trays.
I print a single page of content (say the file "f.pdf") on each of six different colors of paper, which are pulled from different trays.   At the moment, I do this by repeating the filename "f.pdf" six times as an arg to 'gs'. This creates a single postscript file, into which I insert my six 'setpagedevice' commands.
My 65ppm printer has to re-render the same 'f.dpf' postscript six times, which causes it to only produce about 20ppm.
Is there a way to pass a NumCopies specification so that each of my 'setpagedevice' commands switches trays to print the exact same rasterized bitmap? In other words, to write a postscript file that rasterizes 'f.pdf' only once, and still makes use of that cached image for each 'setpagedevice'?
I'm happy to read manuals, but I don't know what technique or feature name(s) I should look for...
thank you,
- Randy

Randy,
If your original one page ps or eps file was e.g.
72 720 moveto
/Helvetica 72 selectfont
(Hello World) show
showpage
Then you can try something like this:
/MyPage
    72 720 moveto
    /Helvetica 72 selectfont
    (Hello World) show
    showpage
} def
and then in paint procedure in the form:
/PaintProc
    MyPage
Use setpagedevice to select your tray instead of a page size like in the prior post's example before calling the form. Since the form is the same on each
page hopefully it will be stored in the form cache and speed things up but you may need to check the cache size.
Ed

Prints unwanted multiples copies

Printer: Officejet 6500 (wireless network connection)
OS: Windows 7
Sometimes when I send a job to the printer it prints multiple copies.
It is totally random and I haven't been able to determine a pattern. It happens from different programs, but not always.
As an example last week I came to the HP site and saw the notice about the forum today. I decided to print it to have as a reminder and I stoped the printer after 3 copies.
Usually it prints 2, but sometimes 3 - and of course, sometimes just 1.
I have check to make sure that when sending the order to print it only says one.
Any ideas?
Thanks

Have you tried the solutions on this thread?
regards, CF
I work for HP and hope to make your day Sproutastic!

Each page to be printed with multiple copies

I have the following requirement:
Each page of a document has to printed in the following way:
at first the page is printed on paper from the standard paper tray
then the same page is printed on special paper from a second paper tray.
The print controls for the paper trays are clear.
The problem is to print each page multiple times
and to feed the paper from different trays for the different copies.
And to get it sorted in that order!
And to get it in one spool item.
Is there a solution with SAP-Script/Smartforms or any other way?

Frank,
Pls look carefully this code which meets exactly your requirement.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
            EXPORTING
              formname           = w_form
            IMPORTING
              fm_name            = w_fmname
            EXCEPTIONS
              no_form            = 1
              no_function_module = 2
              OTHERS             = 3.
          IF sy-subrc <> 0.
            MESSAGE e899(5at) WITH 'Smartform call fails'.
          ENDIF.
          CALL FUNCTION w_fmname
            EXPORTING
              control_parameters = ls_control_param
              wa_vbrk            = wa_vbrk
              wa_adrc            = wa_adrc
              wa_j_1imocomp      = wa_j_1imocomp
              wa_kna1            = wa_kna1
              l_consignee        = l_consignee
              l_name_co          = l_name_co_e
              wa_adrc_l          = wa_adrc_l_e
              l_j_1icht1         = l_j_1icht1_e
              l_grnd_pcs         = l_grnd_pcs_e
              l_grnd_fa          = l_grnd_fa_e
              l_amtsum           = l_amtsum_e
              wa_j_1iexchdr      = wa_j_1iexchdr_e
              l_vbelv            = l_vbelv_e
              l_wadat_ist        = l_wadat_ist_e
              wa_j_1imocomp_l    = wa_j_1imocomp_l_e
              l_name1            = l_name1_e
              l_traid            = l_traid_e
              wa_j_1imocust_l    = wa_j_1imocust_l_e.
FORM set_print_param CHANGING cs_control_param TYPE ssfctrlop.
DATA:    ls_itcpo     TYPE itcpo,
           cf_retcode   TYPE sy-subrc,
           lf_repid     TYPE sy-repid,
           lf_device    TYPE tddevice.
lf_repid = sy-repid.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
    EXPORTING
      pi_nast             = nast
*     PI_ADDR_KEY         = ' '
*     PI_COUNTRY          = ' '
      pi_repid            = lf_repid
*     PI_SCREEN           = ' '
   IMPORTING
      pe_returncode = cf_retcode
      pe_itcpo      = ls_itcpo
      pe_device     = lf_device.
*      pe_recipient = cs_recipient
*      pe_sender     = cs_sender.
IF cf_retcode = 0.
    cs_control_param-device      = lf_device.
    cs_control_param-no_dialog   = 'X'.
    cs_control_param-preview     = xscreen.
    cs_control_param-getotf      = ls_itcpo-tdgetotf.
    cs_control_param-langu       = nast-spras.
ENDIF.
ENDFORM.                    " set
FORM sub_fill_copy .
IF w_juri = 'KOLKATA'.
    t_copy-copy = 'ORIGINAL FOR BUYER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'DUPLICATE FOR TRANSPORTER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'TRIPLICATE FOR ASSESSE'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
ELSEIF w_juri = 'BEHROR'.
    t_copy-copy = 'ORIGINAL FOR BUYER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'DUPLICATE FOR TRANSPORTER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'TRIPLICATE FOR ASSESSE'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
ELSEIF w_juri = 'RUDRAPUR'.
    t_copy-copy = 'ORIGINAL FOR BUYER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'DUPLICATE FOR TRANSPORTER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'TRIPLICATE FOR ASSESSE'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
ELSEIF w_juri = 'MON'.
    t_copy-copy = 'ORIGINAL FOR BUYER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'DUPLICATE FOR TRANSPORTER'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'TRIPLICATE FOR ASSESSE'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
    t_copy-copy = 'EXTRA COPY'.
    APPEND t_copy.
    CLEAR t_copy.
ENDIF.
Amit.

Printing multiple images on single page

Can anyone explain how to print multiple images on the same page such as 4-4x6 photos? Or the same image more than once on a page - similar to the N-up option in iPhoto? Anything new and helpfull for printing in 1.5? Thanks.

No, it isn't what we're looking for.
Let's take the example of a professional portrait photographer (me? ) trying to set up a home-lab with a wide format, roll printer.
I get an order for, say, 2 4x5 of image 1, 2 4x5 of image 2, 4 5x7 of image 3. I have 10" paper loaded in my roll.
What I would want to do is gang the prints onto 3 "units" - the 4 4x5 on one 8"x10" unit, and 2 5x7 on each 7"x10" unit.
Since my clients ordered specific sizes, I need to make sure I get the prints sized exactly right (contact sheet tool doesn't let me do this) and since printing is pricey, I want to make sure to waste as little paper/ink as possible. I also don't want to get stuck doing a lot of trimming.
So, in lightroom, photoshop, imagebuddy, portraits-n-prints etc, I would just ask the app to output the package for me. In Aperture, I'm stuck. I can't use the book tool because it uses a (moronically) fixed page-size. I can't use the contact sheet tool because it doesn't let me specify image size/aspect ratio. I can't use the "standard" print tool because it only prints one image per page.
This is a glaring omission, and a slap in the face to the professionals that Aperture claims to see as its target audience.

Duplex printing of multiple copies of single page

Similar Messages

Maybe you are looking for