Duplex printing with Canon LBP3300 on 10.5.4

After struggle for over 24 hours, I finally managed to get my LBP3300 to print something for me.
http://cweb.canon.jp/drv-upd/lasershot/captusbmacx.html
This is the driver I use in case anyone wants it.
However, the next question is that I CANNOT get LBP3300 to do duplex, which is the ultimate idea of buying this printer!
I do see the item "Two-sided" under "Layout" in the printing option, but then it is in grey and I cant select it...
Is there anyone who can help????
Samson
Message was edited by: Samson Lau

I downloaded the manual that is located on the bottom of the page you have given the link to. Unfortunately it is written in Japanese (understandable given it was on the Canon Japan web site) but looking at the picture on p3.34 it shows the binding position of the paper. The image looks similar to the view in the UFR2 driver so you may have a menu heading of Finishing. If not, have a look at the picture on this page and see if you can match the view with the options you have in the driver.
PaHu

Similar Messages

  • Duplex Printing on Canon IX6560 Problem

    i've got problem with duplex printing on canon ix6560, i've installed the latest driver from canon website (11.7.1.0) for OSX Maverick (10.9.5). what is the solution ?

    First, check the printer specification to make sure it's capable of duplex printing. If it is, there should be a setting in the Finishing tab of the print dialog. Reportedly, Canon tech support sometimes advises customers to uninstall the existing software before installing an update.

  • Duplex printing challenges - Canon Imagerunner C2550

    I'm trying to perform some duplex printing with a Canon C2550. The printer is capable of duplex printing however the option to enable duplex printing in the printer settings on the Mac is greyed out. Trying to use the Canon iR C2380/2550 UFR II (US) driver. I can't find any deplex driver settings in the properties of the driver either. If I switch to the Generic PCL Printer driver installed the Duplexer check box shows up in the driver properties however the printer sees the print request as an invalid formatted job. 
    Any suggestions as how to correct this issue?
    Thank you!
    Greg

    One more important point to include: This is a networked printer, not a local printer. Thanks!

  • Duplex printing with eprint?

    Can I use duplex printing with eprint?  If not, won't use much.

    Hi valkman1291,
    Unfortunately the option to use duplexing is not available in ePrint.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Duplex printing with hp p1102w printer mac book pro with retina display

    duplex printing with hp p1102w printer mac book pro with retina display

    Hello dekcanada,
    I apologize, I'm a bit unclear on exactly what you are asking or describing. If you are asking how you would set up double-sided or duplex printing in Yosemite, you may find the information and steps outlined in the following article:
    OS X Yosemite: Choose advanced print settings
    Sincerely,
    - Brenden

  • How to duplex print with HP 200 Laserjet?

    I'm having trouble duplex printing with my new Macbook Pro. Any suggestions? I have reloaded print drivers- Originally I was not able to select double sided printing but now I can, but it does not actually print double sided.

    For cases where there is no hardware duplexer and the manufacturer's driver does not support manual duplexing, you could try HP's two-sided printing PDF workflow.  I have not tried that for quite a while, so I can't guarantee it still works with the latest version of OS X.

  • Duplex printing with the MG3150

    I have a 36 page document which is A4 in size folding to A5 and I want to print it out as a finished file and I was wonderig if anyone has any information about the duplex feature with the Canon MG3150. Basically the printer is printing both sides of the document but its printing it upside down so the page numbers are not following in the correct order. I think it might have something to do with the 'print both sides' option but for some reason I cannont get this feature to highlight (its always in grey) Any ideas?

    Hello designalien.
    Unfortunately, we here at Canon USA are not familiar with the MG3150.  It appears that this unit is available in Europe or the UK..
    If the unit unit was purchased in Europe, please visit the following link for more information or assistance:
    http://www.canon-europe.com/For_Home/Product_Finder/Multifunctionals/Inkjet/PIXMA_MG3150/ 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Duplex printing on Canon MG6150

    Hey everyone,
    I recently bought a Canon Pixma MG6150 printer which comes with automatic duplex printing. I'm running Snow Leopard 10.6.8.
    I want to use it in InDesign to create a booklet however, whenever I go into Print Settings>Printer>Duplex Printing & Margin everything is greyed out.
    I've tried all the drivers I can find on the Canon website and the CD that came with the printer. I've heard about using older drivers, does this mean to download older OS drivers (I tried 10.5 and my Mac said it was not possible to install) or older drivers from Canon?
    Any ideas? Thanks!

    I fixed the problem, however I've seen a lot of questions about the Canon duplex printing issues with some Mac users so I thought I'd put my solution up to help anyone else.
    Going through the On-Screen Manual that comes with the CD I found out that:
    When a media type other than Plain Paper, Hagaki A or Hagaki is selected from Media Type menu of Quality & Media, Automatic Duplex Printing appears grayed out and is unavailable.
    When Borderless Printing is set, Automatic Duplex Printing appears grayed out and is unavailable.
    Automatic Duplex Printing can be performed only when one of the following paper sizes is selected from Paper Size.US Letter, A5, A4, B5 JIS (JB5), Hagaki
    After printing the front page, there is an ink drying wait time before starting to print the back page (Operation stops temporarily). Do not touch the paper during the time. You can change the ink drying wait time from Custom Settings in the Canon IJ Printer Utility.
    After going through the printing settings and following these regulations, Duplex Printing was no longer grey!

  • Duplex printing on Canon i860

    I have a Canon i860 printer which I have had for a couple of years and have loved it. But since I upgraded a little over a year ago from a Lombard PB running OS 9.1.1 to a G4 iBook running OS 10.4 in its various incarnations I have not been able to print duplex copies. When I can get it to show up on the under the printer menu when I attempt to print the job just automatically stops and it will not print. I have tried loading new drivers but nothing seems to help. Any advice?

    Hello James,
    I am assuming from your post that you can print simplex (ie single sided) without the printer queue stopping. Is this correct?
    Where do you select to do two-sided? Are you making the selection under Layout or is there another choice in the printer menu?
    FYI - for the iP6000D I have currently connected to my MacBook there is the option 'Duplex Printing & Margin'. This is part of the Printing Dialog Extensions (PDEs) that get installed with the driver. The driver version that provides this option is v4.15. I know this version is available for the i865 (the i860 wasn't sold in Oz) and you can download it from the Canon Europe web site. Are you using this version and if yes, are you selecting Duplex Print from this extension?

  • Duplex Printing on Canon MP830 possible?

    Does anyone have a Canon MP830 connected to their MacBook running OS10.4.6? I am able to print, but not able to duplex print. The Layout section of the Print dialog box does not allow me to click on the double-sided printing option.
    In Pages 2, there are a few other sections in the drop-down whose labels are struckthrough, one of which is named Duplexprint430, which I think belongs to the MP830, but again, I am not able to select it.
    Any help, anyone?

    Does anyone have a Canon MP830 connected to their
    MacBook running OS10.4.6? I am able to print, but not
    able to duplex print. The Layout section of the Print
    dialog box does not allow me to click on the
    double-sided printing option.
    In Pages 2, there are a few other sections in the
    drop-down whose labels are struckthrough, one of
    which is named Duplexprint430, which I think belongs
    to the MP830, but again, I am not able to select it.
    Any help, anyone?
    Well I don't have a MacBook (yet), but on my PowerBook with 10.4.6 I see a pull down category called Duplex Printing & Margin. What yours shows sounds suspicous. Canon indicates you should be using driver 4.80. See this link:
    http://alpha02u.c-wss.com/inc/ApplServlet?RQF=MENU&RQS=WWUCA910&LA=1153021983935 &SV=WWUCA900&menu=FA&TRF=MAIN
    To get the driver look here:
    http://alpha02u.c-wss.com/inc/ApplServlet?RQF=MENU&RQS=WWUCA910&LA=1153021987185 &SV=WWUCA900&menu=DR&TRF=MAIN
    Hope this helps.
    12 PowerBook 867mhz rev a   Mac OS X (10.4.6)  

  • HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

    I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
    Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
    Is it possible to use the AUTO DUPLEX  feature of  the printer with Windows 7   64 bit  operating system.
    All replies welcomed!   Aaron in Calif.

    Hi Aaron,
    Make sure the Automatic Duplexing option is enabled:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
    Now Automatic Duplexing should become available.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Duplex printing with HP Color Laserjet 4650dn

    Dear all,
    I wanted to print the handouts of a Powerpoint presentation (Office for Mac 2008, v12.2.5), but could not get a double-sided copy. The printer (HP CLJ 4650 dn) is installed with the OS X 10.6.4 embedded drivers etc. as HP CLJ 4650. Works fine otherwise.
    The settings for the printer in System Preferences/Print Fax/General indicate that I apparently have a driver version 16.4. By accessing the Printer Webpage I have set the duplex option ON and checked all the other options for there settings. As far as I know it seems correct.
    I have ticked the box Duplex Unit in System Preferences/Print Fax/Driver.
    However, when I want to print the slides/handouts and open the print window I can only see Manual Duplex as an option in the drop-down menu Copies & Pages. No straight forward Duplex Printing or Automatic Duplex Printing option whatsoever of which the printer is capable.
    No problem with the two remaining MS Windows Vista PC's, which frustrates me.
    Have I missed something? Or done something wrong/different?
    If anyone has a suggestion I would be grateful.
    Kind regards,
    John Keasberry

    Have you taken a look to the configuration of the Printer? I have a HP 2340 with duplex and to configure it I have to do the following:
    On the Preferences Pane, click on Printing and Fax or open the Printer configuration Utility. In any case, click on the printer and choose "Configuration of the printer" (in the Printer utility this is in the pritner menu). Then you will see information of the printer... May be there you have an option to activate the duplex... In may case there is a checkbox.
    But may be you have done this...
    Bests,
    Álvaro

  • Duplex printing with officejet pro 8000

    I am using this officejet pro 8000 to print up some newsletters.  When printing a two sided copy (duplex printing) something happens which changes my border setting.  Printing the exact same document, but electing one-sided copy renders a perfect border.  I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer.  Has HP ever come up with a fix for this?  I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines.  This has rendered good borders on duplex prints, but diminishes the quality of the print copy.  Whatcha think?

    Terrible Tom wrote:
    Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
    Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
    MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
    Apple doesn't write the HP software.
    Hope this helps.

  • Anybody has any problems with installing and printing with canon lbp6650dn?

    hi,
    i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
    computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
    thanks!

    Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
    You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
    Message was edited by: First Magus

  • Duplex printing with cups

    Hi,
    We have a bunch of Macs all running 10.4.9 (Client) which are unable to print double-sided documents to our printer which is hosted by a redhat enterprise server (v4.4) box, cups version 1.2. The annoying thing is everybody else (windows, linux) can. The printers are set up as A4 paper size, the Macs see that and we see the duplex option in the print dialog box but the printouts come out single-sided with a blank sheet at the end. Another aspect is that when we add a printer using System prefs>Print & Fax etc the cups printer description is displayed as the printer name in the set up dialog on the Mac. Has anybody come across this before and, more importantly, does anybody know how to solve this problem?
    Cheers,
    Matt

    Can you tell us which driver you are using on the Mac's. If it is the included GIMP-Print drivers, try the new Gutenprint 5.0.0 drivers.
    Also, you may want to check the printer info in case you have to add the duplex option. And also try setting the Page Setup > 'Format for' in the application for the printer, rather than any printer, as this can impact duplex printing for some printers.
    Re the printer description being displayed, I know that when you add a network printer the IP address or DNS name is shown as the printers name in the Printer List. You can select it and do a Get Info to rename it.

Maybe you are looking for