Duplex printing with hp p1102w printer mac book pro with retina display

duplex printing with hp p1102w printer mac book pro with retina display

Hello dekcanada,
I apologize, I'm a bit unclear on exactly what you are asking or describing. If you are asking how you would set up double-sided or duplex printing in Yosemite, you may find the information and steps outlined in the following article:
OS X Yosemite: Choose advanced print settings
Sincerely,
- Brenden

Similar Messages

HT201364 Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machin

Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
Brian

Welcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

My mac mac book pro w retina display will not go to sleep when I close the lid or put it to sleep.

My mac mac book pro w retina display will not stay asleep when I close the lid or put it to sleep.
I put the computer in my bag and when I open it again the machine is so hot I can almost not touch it.
I am affraid that the hardware is allready fried.
Also when I press a key to restart after it has been idle for a few minutes it often takes up to a minute to wake back up.
This machine is bran new..
What should I do?

Try a SMC reset:
http://support.apple.com/kb/ht3964
If no success, then use your warranty and bring it in to the nearest Apple repair facility for rectifying this problem.
Ciao.

I am using Mac book pro non retina display with Yosemite and it is taking time to on the Mac . Please suggest me

hi,
i am using Mac book pro with non retina display with latest software yosemitte. When I on the Mac it is taking much time to on the mac / to get main screen. Please suggest us if any option to make it fast

There are several things that could make the computer run slower than expected
or slower than previously experienced from time to time; if a new system was
installed into a computer with slowness and other issues, that may compound the
problem since an upgrade to an OS X is not necessarily a remedy for old trouble.
If the issue may be a performance concern, there are cause and effect reasons
behind computer functionality. And if the computer was super quick, then after
an upgrade to a newer OS X, super slow, there could be several things going on.
The software previously working in the computer may not be correct for a newest
operating system; or the computer hard disk drive may be getting too full of content
that has no relation to the function of the device. Not enough unused storage space
or capacity can contribute to an overall slowness. And this also would relate to the
computer's use of resources. More installed chip RAM can help a computer run
better, and if you have extensive saved content in the computer you made, get an
externally enclosed hard drive and see about how to go & move that accumulation
off the computer's limited space so it could run better.
•Mac Performance Guide - thesafemac:
http://www.thesafemac.com/mpg/
•Tech Guides - in addition to the above - from thesafemac:
http://www.thesafemac.com/tech-guides/
There may also be adware or other kinds of malware inadvertently installed in your
computer; so that is something else to consider, find & remove. Note info in guides.
You could use the Activity Monitor in the Utilities folder (see Go in Finder menu) to
see if there are applications or processes running extensively that could point to
some waste of system resources. If there is something actually using anything at all
out of the ordinary. These kinds of things are hard to judge - if you aren't familiar.
So, anyway, hopefully you can get some ideas from the above site pages to help.
Good luck & happy computing!

Picture quality on Mac book pro w/ retina display

After importing my photos directly from my I pad onto my new mac book pro with retina display I noticed the quality of the photos was much darker and the contrast was different. I did adjust the brightness on the Mac but this was not a solution, I also called tech support and they suggested calibrating the display which also was not a solution. The photos were taken with my I pad and are perfect viewing on the I pad. I tried e mailing the same photo and saving in on the Mac but the quality is still poor. Do I need a very high pixel camera for the Mac to work best?

Yes, most pro audio goes thru USB, NOT the mic jack.
record FROM what, pro mic, what?
more specifics.

TS3311 mac book pro 15 retina display shutoff

I am experience for like 10 days , my retina display on mac pro 15 keep on shutoff randomly, it was never before, anyone who has the same issue?

Welcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

Mac Book Pro 13inch Retina display charging problem..

Hello guys I have a problem with my late 2013 macbook pro retina display 13inch. My macbooks charge was completely finished, and i went to a holiday trip with it. When I got to my hotel and plugged in the charger to a 110W plug, the light on the charger turned into orange as normally but the macbook is not charging. I cannot do anything, what should i do and can i fix it myself or do i need to go to a apple store? Thank you!

In the older MBPs, there are LEDs indicators on the side of the Mac or the Battery itself, which when pressed can show you the state of the battery. These were removed in later Macs like yours.
You can take a look at this. If you do any repairs yourself or through an unauthorized service person/company, your warranty will not be honored, so please be careful. Here is a guide that can let you look at your MBP.
https://www.ifixit.com/Teardown/MacBook+Pro+13-Inch+Retina+Display+Late+2013+Tea rdown/18695

HT2948 Canon HV20 not recognized by Mac Book Pro w/Retina Display

My Canon HV20 is not recognized by my MacBook Pro Retina Display using IMovie. Mac Customer support referred me to Canon for resolution; however, the the Mac site indicates Final Cut Pro supports the HV20.
I'm willing to purchase Final Cut Pro, but will it work? Mac customer support indicated if it is not recognized by IMovie, it probably won't be recognized by Final Cut Pro.

You need to be connecting from the camera to the computer via Firewire (iLink), not USB.
There are anecdotal reports of problems with Firewire 4 pin to Firewire 9 pin (FW400 to FW800) cable adaptors. You might try switching cables to see if you get better results - and it appears that a dedicated cable with a 4 pin connector on one end and a 9 pin connector on the other works best.
MtD

Horizontal line appearing on the Mac Book Pro 13" Retina Display

I RECENTLY BOUGHT A 13"RETINA DISPLAY MACBOOK PRO. IT IS SO DISAPPOINTING. THERE IS A HORIZONTAL LINE THAT APPEARS ON THE SCREEN AND DISAPPEARS. THIS WAS FOR THE THIRD TIME I HAD TO FACE THE SAME ISSUE. WHEN I EXPLAIN TO THE STAFF AT THE APPLE STORE THEY SAY THAT THEY HAVE NOT COME ACROSS SUCH ISSUE, FOR WHICH I SHOWED A PROOF FROM THE OTHER PART OF THE WORLD. VERY DISAPPOINTED.APOLOGIES TO WRITE IN THE UPPER CASE.BUT IT IS FRUSTRATING WHEN YOU HAVE A LOT OF EXPECTATIONS FROM APPLE LAPTOPS.

Thanks. But What at the most they can do. They are going to tell me to take the laptop to the apple store.

Mac Book Pro with Retina Display 13 disconnect from WIFI after few minutes

Hi. I bought new Mac Book Pro 13' Retina display few weeks ago and noticed that my WIFI connection disconnect after few minutes and connect again after tying with few attempts. It tried with both home and office WIFI to make sure that nothing wrong wireless network or modem itself. It seems it is Mac Pro's problem. How to fix it ?
My Home Wireless Modem *** Router is connected with Apple Time Capsule Machine but in my offce there is no Time Capsule Machine attached. It is so annoying. Need Help.

Hello psadana,
Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro. I would be concerned about this too.
I recommend reviewing the full article but steps in the section labeled "Symptom: The network connection drops unexpectedly" specifically stand out to me for the issue you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

Need wireless monochrome laser printer for home office to use with new mac book pro with retina display. I also have to have networking capability. Suggestions for economic printers?

HI, I need to buy an economic monochrome laser that will work wirelessly with new Mac Book Pro with Retina Display inmy home office. Any suggestions? I was considering the HP 1102W or Brothers HL22700W but have heard that they do not work with Mac 10.6.1 or upgrade. Need to try to get his done asap so I will appreciate any and all feedback!

http://www.shopping.hp.com/en_US/home-office/-/products/Printers/Printers

I can't add printers to my new mac book pro with retina display

I am trying to set up my HP wireless printer to my new mac book pro with retina display. I can't get it to work! I have down loaded the latest driver for my printer, and when I go into the printer area and try and add the printer, nothing shows up and it won't let me even add it. I can't seem to connect my mac directly to my printer either as I must need a different cord as there does not seem to be a port for the "phone like jack" that I could fall back on with my old Mac. My printer prints great so I hate to just buy a new printer, but I can't get this to work. My wireless router is located in the basement, far away from where I keep my printer so it also makes it hard to rest everything. I even bought the blue tooth adaptor for the HP printer thinking that would solve it all, and nope! Any help would be greatly appreciated!

I have made some progress.... I can print wirelessly from my printer now, but I can't set the printer itself to be wireless. I had to move my printer downstairs to where my router is...which is not that convient. I printed up the page you asked about....and as expected, it says it is off line and there is no IP address. So now I need to figure out how to make my printer itself wireless. I did download the HP driver I needed...but I can't access it to do anything else. It seems l like I am missing a step... or I need to hook up my computer itself to the printer to help get the printer to be wirelss, but I can't hook it up because there is no port for me to do that (no port that looks like a phone jack). I am guessing I would need a different type of cord, but I am not sure what kind of cord that would be! Ugh!

Mac Book Pro with Yosemite 10.10.1 software and a HP Photosmart C4599

Hello I have a Mac Book Pro with Yosemite 10.10.1 software and a HP Photosmart C4599 All in one printer and I am unable to install my printer, it will print when cable is connected but I cannot add it wirelessly. i have checked for software updates but none are available.

Hi,
A software for a such is no longer available however you may set a wireless connection by following the workaround below:
Step one: Restore the network defaults:
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Restore Network Defaults is highlighted, and then press OK.
3. Confirm that you want to restore the network defaults.
Step two: Turn the wireless radio on:
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Turn Radio On is highlighted, and then press OK.
Step three: connect the Mac to your printer:
1. From the Mac click the WiFi icon and then click on Join Other Network.
2. Click on Show Networks and connect to the listed HPSETUP network.
Step four: connect the printer to your wireless network via the EWS interface:
1. Open Safari.
2. Click the Safari menu and then click Preferences.
3. From the Advanced tab, check both of the checkmarks under "Include Bonjour" and press OK.
4. click Bonjour from the top menu, then select the printer to load its EWS page.
5. Click on Networking, then click the Advanced tab.
6. Type the wireless network name as SSID.
7. Select the Infrastructure option
8. Select the correct security type as WEP Encryption or WPA-PSK Authentication and type the password of your router.
Note: If you are not sure about the SSID and the security type, click the WiFi icon on your Mac and select Open Network Preferences.
Click the Advanced button and locate your home network, the Network name aquals to SSID and the exact security type is listed.
Once you are done click on Apply and the wireless light should lit.
Then reconnec tthe Mac to your router, open ystem Preferences > Printers & Scanners and add the printer as Bojour by clicking the plus sign.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I am programmer and I am using dr java on my mac-book pro with retina display but dr java doesn't support retina display, what is the possible way to solve this ?

I am programmer and I am using dr java on my mac-book pro with retina display but dr java doesn't support retina display, what is the possible way to solve this ?

I have made some progress.... I can print wirelessly from my printer now, but I can't set the printer itself to be wireless. I had to move my printer downstairs to where my router is...which is not that convient. I printed up the page you asked about....and as expected, it says it is off line and there is no IP address. So now I need to figure out how to make my printer itself wireless. I did download the HP driver I needed...but I can't access it to do anything else. It seems l like I am missing a step... or I need to hook up my computer itself to the printer to help get the printer to be wirelss, but I can't hook it up because there is no port for me to do that (no port that looks like a phone jack). I am guessing I would need a different type of cord, but I am not sure what kind of cord that would be! Ugh!

Duplex printing with hp p1102w printer mac book pro with retina display

Similar Messages

Maybe you are looking for