Duplexing not working

I have an HP Office Pro 8600 Plus.  I printed two sided (when requested) successfully for over a year.  NOW when I want to print double sided the only option I have is to "Manually Print on Both Sides".   What happened and how do I fix it?
I did have to uninstall and reinstall the printer because it was no longer connecting wirelessly.  Maybe I goofed up the settings somehow when I did this? 
This question was solved.
View Solution.

You may need to configure the driver so that it knows that a duplex unit is present on the device (assuming that one is present and physically working).
On the Printer properties dialogue, select the Device settings tab, and ensure that the duplex unit is set to Installed, rather than Not installed.

Similar Messages

  • Duplexing not working for LaserJet 5M (maybe just LaserJet 5?)

    Hi,
    I have a HP LaserJet 5 printer (that's what it says on the front), and at one point, I believe that I bought the memory module that adds PostScript handling, which at the time I think made the printer equivalent to a LaserJet 5M. Anyway, I recently discovered that I can no longer print duplex pages (the printer has the duplexer attached, and it works when printing from my Windows machine). I'm not 100% sure that this started when I upgraded to Leopard, but this is probably the case. I went to HP's website, and went to the driver download area and for the "LaserJet 5/m/n Printer Series", there was a driver called "HP LaserJet and Edgeline Print Driver Only for Mac OS X 10.5". The version of this driver was listed as 7.8.761 with a date of 28 Jan 2008. Feeling that I had found the problem, I downloaded this driver (it was an install package), and installed it. Prior to installation, I deleted my LaserJet from my list of installed printers. After installation, I reinstalled it (it is an IP printer, with a JetDirect card in it), but the duplexing problem remains. But checking the printer driver information in System Preferences, it shows the driver version as 4.3.1.094, and not the version 7.8.761 that was reported on HP's website for the driver that I just downloaded. When I select "Select a driver to use..." from the Driver tab of the info panel for my LaserJet, I see the following candidate printer drivers listed:
    HP LaserJet 5 - Gutenprint v5.1.3
    HP LaserJet 5 series - CUPs+ Gimp-Print v4.2.7
    HP LaserJet 5 series - Gimp-Print v5.0.0-beta2
    HP LaserJet 5M
    HP LaserJet 5M - Gutenprint v5.1.3
    It doesn't seem to me that any of these drivers are the one that was supposedly installed by the HP software that I downloaded. I'm hoping that someone here has been through this situation and has figured out how to get duplexing to work for this printer. Thanks for any suggestions.
    Ken

    Razmee209,
    Yes, I have checked ALL settings, restored and tried even the "illegal" things that could possibly fix it, it has left me with nothing but headaches and disappointment because I'm either faced with more errors.  I feel I'm suck with this error that Apple is using us to update to a newer more expensive phone. 
    So Razmee, what kind of phone do you have and are you on an AT&T contract?  Are you on iOS 6?

  • Automatic full duplex not working on Inkjet 1200 with W7

    I am using a Business Inkjet 1200dtwn with a clean install upgrade from XP2 to Windows 7 Premium.  Automatic Full Duplex worked fine with XP and HP’s driver; but Full Duplex will not work with the Microsoft driver that installed after the upgrade to W7. 
    Does HP have a driver for my combination?  If not, what do you suggest?
    Printer was purchased through the HP Store on 11/8/04.
    Product model number: C8156A
    Product serial number: TH47N11022
    Windows upgrade from XP to W7 Premium was purchased through the Microsoft Store earlier this year and is up to date via Microsoft’s automatic upgrade notification.
    I bought the HP Pavilion dv9000t Notebook through the HP Store on 12/31/06.
     Pavilion dv9000t, p/n: EZ379AV, s/n: CNF7012K4X.  aka: HP Pavilion dv9000t CTO Notebook PC. 
    This question was solved.
    View Solution.

    Congratulations on your Post!  As a Student you earned an A+
    Some time ago I got auto duplex to work by deleting the 1200 in Devices and Printers, Restarting just to be safe, then letting Plug-N-Play install the driver by enabling install to search my computer and the web to find the latest driver.  The new driver properties had the option to install 2 sided printing.  I clicked on the option and tne printer worked (just as you said). 
    Then I failed to post my solution.  My bad
    Thanks for your post! 

  • Mac Pro 10.6.5 100baseTX Full Duplex Not Working

    Hi Guys,
    I am having some trouble with the Mac Pros that I support in my office (Early 2009 Model). Our network uses 100baseTX Full Duplex on all of our connections in a mixed PC/Mac environment. This was working perfectly fine until we updated our Mac Pros to 10.6.5 (Went straight from 10.5.6 to 10.6.5).
    Every Mac Pro now has itself set to automatically detect the speed, and they keep setting themselves to 100/Half. If I go in and manually adjust it, setting it to 100/Full, I lose all connectivity to the ethernet (it doesn't even recognize that a cable is plugged in). This is causing a lot of troubles for our Mac users trying to access files on our shared drives. It is taking them about 5 minutes to download a 30MB file, rather than the 3 seconds it should.
    I tried booting to our portable 10.5.6 drive and 100/Full works just fine. Our PowerMacs on 10.4.11 also work fine on 100/full. I tried using Cocktail and Sudo to force the change, but again the ethernet drops out. The problem persists through all user accounts on all the effected Macs. I have tried a fresh install of 10.6 and the problem persists. If I downgrade back to 10.5 the problem is gone. I know it is not an issue with the network because 2000 other machines are working just fine, and the affected ones work fine when downgraded.
    I just spent a good hour on the phone with AppleCare, but after insisting it was a problem with our network for the first 45 minutes, they came to the conclusion that they simply could not help me. According to them, if I want networking help, I need to convince my company to spend $2,800 on their enterprise support, and even then they don't know if they will be able to help me. So, it looks like I am on my own here.
    Anyone have any thoughts on what is going on or how to fix it?

    Yalp wrote:
    The only possibility that I can see is that it is a software problem on these Macs.
    There is always a certain level of slack engineering into all these devices. When you start updating one part of a network, you risk exceeding the slack. It is always possible that the problem is with the router hardware or cabling. Certainly, the problem would be with 10.6.5 too. But if you jump to one conclusion or the other without troubleshooting you risk waiting forever for a fix that will never come.
    So, what you have to do is connect these Macs to some other router/hub running 100BT/Full (with settings as close to default as possible) with cables that you know are rated at that speed. If that fails, submit a bug report to Apple. If it works, take your router/hub and put it in the network cabinet and connect it to the Mac Pro with the existing cable. If that fails, sue whomever installed the cable and redo it (network people sometimes try to save money with cable). If that works, look at the existing router/hub and see if it has any bugs or firmware updates available. At this point, you could submit a bug to Apple with precise details about your router/hub and also submit one to the manufacturer of the router/hub. Apple will either fix the problem or contact the router/hub manufacturer and get a fix. Once you know precisely what connection is causing the problem, there may be other ways to address it either on the router/hub side or on the Mac side.

  • Simple TCP chat application half duplex not working for me

    I m having a problem in TCP application working half duplex
    My friend runs client program who is in near by city and i run the server program in my system
    Let my ip address is 116.x.y.z
    My server program is
    import java.net.*;
         import java.io.*;
         public class tcpserver
             public static void main(String args[]) throws IOException
              ServerSocket s1=null;
              try
                 s1=new ServerSocket(98);
              catch(IOException e)
                 System.err.println("Could not find port 98");
                 System.exit(1);
              Socket c=null;
              try
                 c=s1.accept();
                 System.out.println("Connection from"+c);
                                      catch(IOException e)
                 System.out.println("Accept failed");
                 System.exit(1);
              PrintWriter out=new PrintWriter(c.getOutputStream(),true);
              BufferedReader in=new BufferedReader(new InputStreamReader(System.in));
              System.out.println("I am ready,type now");
              String l=in.readLine();
              while(l!=null)
                 out.println(l);
              out.close();
              in.close();
              c.close();
              s1.close();
         }The Client program is which my friend executes is
    import java.net.*;
         import java.io.*;
         public class tcpclient
             public static void main(String arg[]) throws IOException
              Socket s=null;
              BufferedReader b=null;
              try
                 s=new Socket(InetAddress.getByName("116.x.y.z"),98);
                 b=new BufferedReader(new InputStreamReader(s.getInputStream()));
              catch(UnknownHostException u)
                 System.err.println("I dont know host");
                 System.exit(0);
              String inp;
              while((inp=b.readLine())!=null)
                 System.out.println(inp);
                 break;
              b.close();
              s.close();
         }Important Note: When i run this program specifying within my system its working ( i mean running the program in two different windows(terminals) its working for me)
    When i give the client program to my friend its getting compiling for him but not running for him
    Its showing him unknownhost exception and main method not found like this.
    Please correct the above code or else just what kind of strategy we should follow in order to get rid of this problem
    When i normally run this program in my system
    the output when i run in my own system is
    Output for running tcpserver.java
    ~\JDK2~1.0\bin>java tcpserver
    Connection fromSocket[addr=/116.x.y.z,port=1930,localport=98] // in output i edit the ip address text
    I am ready,type now
    this is test text
    Output for running tcpclient.java
    ~\JDK2~1.0\bin>java tcpclient
    this is test text
    My problem is its working in my system when it exceeds out the output is not available for me
    Help me Please !!!

              String l=in.readLine();
              while(l!=null)
              out.println(l);
              }That will print the same thing forever. Make it the same as the loop in the client.
    Important Note: When i run this program specifying within my system its working ( i mean running the program in two different windows(terminals) its working for me)Looping forever might be what you call 'working'. I don't.
    Its showing him unknownhost exception and main method not found like this.Change this:
    new Socket(InetAddress.getByName("116.x.y.z"),98)to this:
    new Socket("116.x.y.z",98)although your friend may then run into connectivity problems ...

  • HP DeskJet 990c duplex not working after Maverick update

    Try the 
    Deskjet 3520 All-in-One Printer Series driver
    I used this with my moms old deskjet 990c printer and now she can print duplex in Maverick.
    You can go to layout and enable double sided printing.
    Good luck!!!
    These updates are frustrating, when you don't care about wireless printing, they should just tell you which driver still supports the old basics.

    Hello darrenfromsolihull,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're unable to add a printer, please follow the steps outlined below.
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Troubleshooting printer issues in OS X - Apple Support
    Take care,
    Alex H.

  • 100TX Full Duplex not working forced to 100/half - fixed

    I dont know if everybody figured this out. but I found this info on an old board and it worked for me on my qaud Intel running SL server.
    First check your Network Utility to see which network interface is active but problamatic. (eg. en0, en1, en2).
    Open terminal and enter command line:
    sudo ifconfig en0 media 100baseTX mediaopt hw-loopback
    Depending on your active network interface you may have to change the "en0" to "en1"......
    My Mac immediately began communicating at 100/Full.
    However, If you shut the machine down you will have to do this again after each reboot.

    Yalp wrote:
    The only possibility that I can see is that it is a software problem on these Macs.
    There is always a certain level of slack engineering into all these devices. When you start updating one part of a network, you risk exceeding the slack. It is always possible that the problem is with the router hardware or cabling. Certainly, the problem would be with 10.6.5 too. But if you jump to one conclusion or the other without troubleshooting you risk waiting forever for a fix that will never come.
    So, what you have to do is connect these Macs to some other router/hub running 100BT/Full (with settings as close to default as possible) with cables that you know are rated at that speed. If that fails, submit a bug report to Apple. If it works, take your router/hub and put it in the network cabinet and connect it to the Mac Pro with the existing cable. If that fails, sue whomever installed the cable and redo it (network people sometimes try to save money with cable). If that works, look at the existing router/hub and see if it has any bugs or firmware updates available. At this point, you could submit a bug to Apple with precise details about your router/hub and also submit one to the manufacturer of the router/hub. Apple will either fix the problem or contact the router/hub manufacturer and get a fix. Once you know precisely what connection is causing the problem, there may be other ways to address it either on the router/hub side or on the Mac side.

  • Sound problems, full-duplex not working?

    Hi,
    Im having a problem with sound, i use ALSA, and when i play a mp3 in XMMS i cant hear the sounds from other apps (as Gaim) until the song finishes and im presented with all of them at once, this means that i get the usual message recieved sound one after the other, until all the messages sent during the song are "heard". and the next song starts.
    I think has something to do with full-duplex, but dont know where to look or fix it.
    any help?

    It doesn't have to do with full-duplex.  Full-duplex is being able to play sound out of your sound card and record sound at the same time.
    What you want is to be able to play more than one sound at once.  Only certain cards and certain drivers support this (one is the emu10k1, the sblive), most don't.  If you want to play multiple sounds at once maybe you should install a sound daemon like esd or artsd.

  • Windows 7, Manual Duplex 1200 laserjet not working, USB connection

    I just want to PRINT  Manual Duplex - Booklet - 2 page per sheet ....and it's not working. Actually it print pages, but just on one side.
    It continues to PRINT everything on ONE side ( so the printer PRINT all on SINGLE SIDE...there is no POPUP window to TELL you to MOVE printed pages into INPUT BIN, so to continue manula duplex printing)
    Sorry if my English is bad!
    in Windows XP, everything was fine....but in Win 7 Entreprise 32-bit, problem with MANUAL DUPLEX
     I try many drivers, because the WIN7 official driver is not having MANUAL DUPLEX. Non of them work
    Next thing I notices is  missing OPTION for MANUAL DUPLEX (in win7 official drivers)
    Start - device and printers - (right click on) HP LaserJet 1200 Series PCL 5 - Printer Properties - Device Settings
    Duplex Unit (for 2 - sided printing)....it say its INSTALLED (but I know that I dont have that). After Switching to NOT INSTALLED, the OPTION in driver for BOOKLET, simply disappear.
    Any advice?

    AND forgot to say,
    there is NO OPTION to SET MANAUL DULPEX (in win 7 drivers)
    I also readed your
    Vista / Win 7 Duplex Printing Troubleshooting Guide 
    but no help with that

  • HP Officejet Pro 8600 Duplex Printing Not Working

    I am running Windows 7. Duplex printing is not working on my Officejet Pro 8600. It has worked in the past, but I cannot get it to work now. I have reset the printer and restarted by laptop. I have not made any changes that should affect the duplex printing. Thank you. 

    Hi there beachlover.
    Hope you are doing wel and welcome to the HP forums;
    The Hardware Diagnostic tool can help you find common hardware issues and in most occasions fix them Give it a try by going to this link  www.hp.com/go/tools Let me know the results and include any errors that the utility finds
    I will try my best to help you .
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Printing booklet duplex on 6500a+ printer not working

    Printing booklet in duplex on 6500a+ printer with the following print settings is not working. I have no problem printing this same booklet duplex on the 6500 base printer.
    The problem wasn't the 6500a+, it was MS Word 2007. With MS Word 2010, it printed the booklet in duplex just fine. Here's the matrix:
    MS Word 2007 and HP 6500, prints booklet in duplex automatically.
    MS Word 2007 and HP 6500A+, must duplex manually.
    MS Word 2010 and HP 6500, must duplex manually.
    MS Word 2010 and HP 6500A+, prints booklet in duplex automatically.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

  • Connected Deskjet 6940 to computer with windows 7 64 bit, duplex print will not work?

    I have a Deskjet 6940 model C8970A. The Duplex printer function does not work. It will manually ask me to turn around all the pages to print on the other side. Before it would print front then back of page at a time.  I have Windows 7 64 bit on the new computer.

    Hi,
    The Duplex Unit is disabled by default, make sure to enable the accessory as following:
    Enter Control Panel > Devices and Printers
    Right click the HP Deskjet 6940 icon, then click Printer Properties.
    Select the Device Settings tab.
    Set the Duplex Unit as Installed, click OK.
    Now set Print On Both Sides as Automatically from the Printing Preferences Dialog.
    Please let me know if you may still experience any issue,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • ICal server will not work

    I am running a small network on a MacPro running OS X server 10.5.4 with 2 mac clients and 2 windows clients. The OS X server was installed by an apple specialist but it is still not working properly and I find it hard to believe that it is a bug is the software as it seems to be a fundamental problem which most people would have encountered.
    Each user has their home directories stored on a separate drive on the server and iCal server is running. However, when a Mac client logs into the network they iCal does not work properly. It either will not show any calendars or if it does then a new event cannot be entered.
    Below is an extract from the client message log from rebooting the machine. The first problems with iCal seem to occur at 1:20:48:
    9/5/08 1:19:34 PM kernel npvhash=4095
    9/5/08 1:19:30 PM com.apple.launchctl.System[2] fsck_hfs: Volume is journaled. No checking performed.
    9/5/08 1:19:30 PM com.apple.launchctl.System[2] fsck_hfs: Use the -f option to force checking.
    9/5/08 1:19:33 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    9/5/08 1:19:33 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    9/5/08 1:19:33 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    9/5/08 1:19:34 PM DirectoryService[11] Launched version 5.4 (v514.21)
    9/5/08 1:19:35 PM kernel hi mem tramps at 0xffe00000
    9/5/08 1:19:34 PM DirectoryService[11] Improper shutdown detected
    9/5/08 1:19:35 PM kernel PAE enabled
    9/5/08 1:19:34 PM kextd[10] 404 cached, 0 uncached personalities to catalog
    9/5/08 1:19:35 PM kernel 64 bit mode enabled
    9/5/08 1:19:35 PM kernel Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    9/5/08 1:19:35 PM kernel standard timeslicing quantum is 10000 us
    9/5/08 1:19:35 PM kernel vmpagebootstrap: 508582 free pages and 15706 wired pages
    9/5/08 1:19:35 PM kernel migtable_maxdispl = 79
    9/5/08 1:19:35 PM kernel 91 prelinked modules
    9/5/08 1:19:35 PM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    9/5/08 1:19:35 PM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    9/5/08 1:19:35 PM kernel Loading security extension com.apple.security.TMSafetyNet
    9/5/08 1:19:35 PM kernel calling mpopolicyinit for TMSafetyNet
    9/5/08 1:19:35 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    9/5/08 1:19:35 PM kernel Loading security extension com.apple.nke.applicationfirewall
    9/5/08 1:19:35 PM kernel Loading security extension com.apple.security.seatbelt
    9/5/08 1:19:35 PM kernel calling mpopolicyinit for mb
    9/5/08 1:19:35 PM kernel Seatbelt MACF policy initialized
    9/5/08 1:19:35 PM kernel Security policy loaded: Seatbelt Policy (mb)
    9/5/08 1:19:35 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
    9/5/08 1:19:35 PM kernel The Regents of the University of California. All rights reserved.
    9/5/08 1:19:35 PM kernel MAC Framework successfully initialized
    9/5/08 1:19:35 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
    9/5/08 1:19:35 PM kernel devfsmakenode: not ready for devices!
    9/5/08 1:19:35 PM kernel IOAPIC: Version 0x20 Vectors 64:87
    9/5/08 1:19:35 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
    9/5/08 1:19:35 PM kernel mbinit: done
    9/5/08 1:19:35 PM kernel Security auditing service present
    9/5/08 1:19:35 PM kernel BSM auditing present
    9/5/08 1:19:35 PM kernel rooting via boot-uuid from /chosen: 033560DC-0859-35E9-B64E-FE25488D5DD8
    9/5/08 1:19:35 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    9/5/08 1:19:35 PM kernel AppleYukon2: 532111ab,00000000 sk98osx_dnet - CheckDictionaryEntry failed, expected vs. dictionary
    9/5/08 1:19:35 PM kernel FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001e52fffe510454; max speed s400.
    9/5/08 1:19:35 PM kernel CSRHIDTransitionDriver::start []
    9/5/08 1:19:35 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/Hitachi HTS541612J9SA00 Media/IOGUIDPartitionScheme/Customer@2
    9/5/08 1:19:35 PM kernel BSD root: disk0s2, major 14, minor 2
    9/5/08 1:19:35 PM kernel jnl: unknown-dev: replay_journal: from: 13329408 to: 15447040 (joffset 0x11f02000)
    9/5/08 1:19:35 PM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
    9/5/08 1:19:35 PM kernel jnl: unknown-dev: journal replay done.
    9/5/08 1:19:35 PM kernel HFS: Removed 5 orphaned unlinked files or directories
    9/5/08 1:19:35 PM kernel Jettisoning kernel linker.
    9/5/08 1:19:35 PM kernel Resetting IOCatalogue.
    9/5/08 1:19:35 PM kernel GFX0: family specific matching fails
    9/5/08 1:19:35 PM kernel display: family specific matching fails
    9/5/08 1:19:35 PM kernel Matching service count = 1
    9/5/08 1:19:35 PM kernel Matching service count = 3
    9/5/08 1:19:35 PM kernel Matching service count = 3
    9/5/08 1:19:35 PM kernel Matching service count = 3
    9/5/08 1:19:35 PM kernel Matching service count = 3
    9/5/08 1:19:35 PM kernel Matching service count = 3
    9/5/08 1:19:35 PM kernel display: family specific matching fails
    9/5/08 1:19:35 PM kernel Previous Shutdown Cause: 0
    9/5/08 1:19:35 PM kernel GFX0: family specific matching fails
    9/5/08 1:19:35 PM kernel ath_attach: devid 0x1c
    9/5/08 1:19:35 PM kernel yukon: Ethernet address 00:16:cb:ad:ea:bb
    9/5/08 1:19:36 PM kernel mac 10.3 phy 6.1 radio 10.2
    9/5/08 1:19:36 PM kernel USBF: 11.740 AppleUSBHubPort: Port 1 of Hub at 0x7d000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
    9/5/08 1:19:36 PM kernel USBF: 12. 41 CSRHIDTransitionDriver[0x3dcb680](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
    9/5/08 1:19:36 PM kernel CSRHIDTransitionDriver... done
    9/5/08 1:19:37 PM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[16] starting
    9/5/08 1:19:38 PM configd[14] Error: No interface name for AirPort_Athr5424ab
    9/5/08 1:19:38 PM configd[14] Error: ioPublishedDriverCallback() failed to initDeviceFromService()
    9/5/08 1:19:38 PM fseventsd[38] event logs in /.fseventsd out of sync with volume. destroying old logs. (215919 13 231722)
    9/5/08 1:19:38 PM fseventsd[38] log dir: /.fseventsd getting new uuid: 01610E3D-7144-4D13-84C5-AD0B5AA2A76F
    9/5/08 1:19:44 PM rpc.statd[29] statd.notify - no notifications needed
    9/5/08 1:19:45 PM bootlog[45] BOOT_TIME: 1220617164 0
    9/5/08 1:19:46 PM kextd[10] writing kernel link data to /var/run/mach.sym
    9/5/08 1:19:47 PM VMware Fusion 72241[58] Starting VMware Fusion:
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] VMware Fusion 72241: Starting VMware Fusion:
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmmon.kext loaded successfully
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmci.kext loaded successfully
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmioplug.kext loaded successfully
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmnet.kext loaded successfully
    9/5/08 1:19:47 PM kernel vmmon: Loaded @ 0x4bcbe000: Info 0x4bccb500 Name com.vmware.kext.vmx86 Version 1.1.1fc2 build-72241 at Jan 16 2008 21:26:45
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Internet Software Consortium DHCP Server 2.0
    9/5/08 1:19:47 PM kernel vmmon: Service start
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] All rights reserved.
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Please contribute if you find this software useful.
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] For info, please visit http://www.****.***/****-contrib.html
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Configured subnet: 192.168.91.0
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Setting vmnet-dhcp IP address: 192.168.91.254
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Opened:
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Recving on VNet/vmnet8/192.168.91.0
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Sending on VNet/vmnet8/192.168.91.0
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Internet Software Consortium DHCP Server 2.0
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] All rights reserved.
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Please contribute if you find this software useful.
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] For info, please visit http://www.****.***/****.html
    9/5/08 1:19:47 PM kernel vmmon: Instrumenting bug 151304 without page information...
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Configured subnet: 192.168.164.0
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Setting vmnet-dhcp IP address: 192.168.164.254
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Opened:
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Recving on VNet/vmnet1/192.168.164.0
    9/5/08 1:19:47 PM com.vmware.launchd.vmware[48] Sending on VNet/vmnet1/192.168.164.0
    9/5/08 1:19:47 PM kernel vmmon: Fast clock thread started.
    9/5/08 1:19:47 PM kernel vmmon: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
    9/5/08 1:19:47 PM kernel vmmon: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
    9/5/08 1:19:47 PM kernel vmmon: Module initialized.
    9/5/08 1:19:47 PM kernel vmmon: Registering for power state changes
    9/5/08 1:19:47 PM kernel vmci: Initializing module.
    9/5/08 1:19:47 PM kernel vmci: VMCI: Driver initialized.
    9/5/08 1:19:47 PM kernel vmci: Module initialized.
    9/5/08 1:19:47 PM kernel vmnet: Initializing module (version 1.1.1fc2, build-72241).
    9/5/08 1:19:47 PM kernel vmnet: VMNet_Start allocated gOSMallocTag
    9/5/08 1:19:47 PM kernel vmnet: Module initialized.
    9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x43b8100.
    9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x43b8100
    9/5/08 1:19:47 PM kernel vmnet: Hub 8 does not exist, allocating memory.
    9/5/08 1:19:47 PM kernel vmnet: Allocated hub 0x445d800 for hubNum 8.
    9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:e5:c6:b8
    9/5/08 1:19:47 PM kernel vmnet: Hub 8
    9/5/08 1:19:47 PM kernel vmnet: Port 0
    9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480e00.
    9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x4480e00
    9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:e4:8c:c0
    9/5/08 1:19:47 PM kernel vmnet: Hub 8
    9/5/08 1:19:47 PM kernel vmnet: Port 0
    9/5/08 1:19:47 PM kernel vmnet: Port 1
    9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480c00.
    9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x4480c00
    9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:ff:08:cc
    9/5/08 1:19:47 PM kernel vmnet: Hub 8
    9/5/08 1:19:47 PM kernel vmnet: Port 0
    9/5/08 1:19:47 PM kernel vmnet: Port 1
    9/5/08 1:19:47 PM kernel vmnet: Port 2
    9/5/08 1:19:47 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x4480c00.
    9/5/08 1:19:47 PM kernel vmnet: netif-vmnet8: Adding protocol 2.
    9/5/08 1:19:47 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480a00.
    9/5/08 1:19:47 PM kernel vmnet: VMNetConnect: returning port 0x4480a00
    9/5/08 1:19:47 PM kernel vmnet: Hub 1 does not exist, allocating memory.
    9/5/08 1:19:47 PM kernel vmnet: Allocated hub 0x448b800 for hubNum 1.
    9/5/08 1:19:47 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:eb:03:38
    9/5/08 1:19:48 PM kernel vmnet: Hub 1
    9/5/08 1:19:48 PM kernel vmnet: Port 0
    9/5/08 1:19:48 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x4480a00.
    9/5/08 1:19:48 PM kernel vmnet: netif-vmnet1: Adding protocol 2.
    9/5/08 1:19:48 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x4480800.
    9/5/08 1:19:48 PM kernel vmnet: VMNetConnect: returning port 0x4480800
    9/5/08 1:19:48 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:f3:c2:e0
    9/5/08 1:19:48 PM kernel vmnet: Hub 1
    9/5/08 1:19:48 PM kernel vmnet: Port 0
    9/5/08 1:19:48 PM kernel vmnet: Port 1
    9/5/08 1:19:48 PM /usr/sbin/ocspd[85] starting
    9/5/08 1:19:48 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33] Login Window Application Started
    9/5/08 1:19:48 PM /System/Library/CoreServices/rapserver.app/Contents/MacOS/rapserverd[25] RAP: Starting, pid=25
    9/5/08 1:19:48 PM /System/Library/CoreServices/rapserver.app/Contents/MacOS/rapserverd[25] RAP: Started, pid=25, port=4073
    9/5/08 1:19:50 PM kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:b2:46:95
    9/5/08 1:19:51 PM kernel display: Not usable
    9/5/08 1:19:50 PM mDNSResponder[16] Adding registration domain paul\.dyson.members.mac.com.
    9/5/08 1:19:50 PM mDNSResponder[16] Adding registration domain paul\.dyson.members.mac.com.
    9/5/08 1:19:51 PM configd[14] setting hostname to "Media-Mac-mini.local"
    9/5/08 1:19:51 PM airportd[90] No networks found on channels remembered for belkin54g
    9/5/08 1:19:51 PM airportd[90] Could not find "belkin54g"
    9/5/08 1:19:51 PM airportd[90] Could not find any preferred networks; trying broadcast requests..
    9/5/08 1:19:51 PM ARDAgent [96] ******ARDAgent Launched******
    9/5/08 1:19:51 PM loginwindow[33] Login Window Started Security Agent
    9/5/08 1:19:52 PM mDNSResponder[16] registerserviceinstance: domain paul\.dyson.members.mac.com. already registered
    9/5/08 1:19:53 PM ARDAgent [96] ******ARDAgent Ready******
    9/5/08 1:19:54 PM airportd[90] Broadcast requests also failed..
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] iCal Server Launched!
    9/5/08 1:19:55 PM org.ntp.ntpd[24] Error : nodename nor servname provided, or not known
    9/5/08 1:19:55 PM ntpdate[108] can't find host time.euro.apple.com
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] Loading VirusBarrier Service
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: extension /Library/StartupItems/VirusBarrier/VirusBarrierService.kext appears to be loadable
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: loading extension /Library/StartupItems/VirusBarrier/VirusBarrierService.kext
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: /Library/StartupItems/VirusBarrier/VirusBarrierService.kext loaded successfully
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: sending personalities to kernel:
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: from extension /Library/StartupItems/VirusBarrier/VirusBarrierService.kext:
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: ScannerService
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: sending 1 personality to the kernel
    9/5/08 1:19:55 PM com.apple.SystemStarter[27] kextload: matching started for /Library/StartupItems/VirusBarrier/VirusBarrierService.kext
    9/5/08 1:19:55 PM ntpdate[108] no servers can be used, exiting
    9/5/08 1:19:55 PM airportd[90] Probing highest ranked networks via directed scan..
    9/5/08 1:19:58 PM kernel AirPort: Link Up on en1
    9/5/08 1:20:03 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x496af00.
    9/5/08 1:20:03 PM kernel vmnet: VMNetConnect: returning port 0x496af00
    9/5/08 1:20:03 PM kernel vmnet: Hub 0 does not exist, allocating memory.
    9/5/08 1:20:03 PM kernel vmnet: Allocated hub 0x496b000 for hubNum 0.
    9/5/08 1:20:03 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:ef:00:58
    9/5/08 1:20:03 PM kernel vmnet: Hub 0
    9/5/08 1:20:03 PM kernel vmnet: Port 0
    9/5/08 1:20:03 PM kernel vmnet: bridge-en1: got dev 0x3dc8004
    9/5/08 1:20:03 PM kernel vmnet: bridge-en1: wireless interface detected.
    9/5/08 1:20:03 PM kernel vmnet: bridge-en1: up
    9/5/08 1:20:03 PM kernel vmnet: bridge-en1: attached
    9/5/08 1:20:03 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x496af00.
    9/5/08 1:20:05 PM kernel AppleYukon2: error - 2 Pair Downshift detected
    9/5/08 1:20:05 PM kernel AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SKDRV_DOWNSHIFTDET
    9/5/08 1:20:05 PM kernel AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
    9/5/08 1:20:06 PM kernel vmnet: bridge-en1: interface en is going DOWN
    9/5/08 1:20:06 PM airportd[90] Error: Apple80211Associate() failed -6
    9/5/08 1:20:07 PM kernel vmnet: VMNetDisconnect called for port 0x4968000
    9/5/08 1:20:07 PM kernel vmnet: bridge-en1: filter detached
    9/5/08 1:20:07 PM kernel vmnet: bridge-en1: down
    9/5/08 1:20:07 PM kernel vmnet: bridge-en1: detached
    9/5/08 1:20:07 PM kernel vmnet: Freeing hub at 0x496b000.
    9/5/08 1:20:07 PM kernel vmnet: VNetUserIf_Create: created userIf at 0x496aa00.
    9/5/08 1:20:07 PM kernel vmnet: VMNetConnect: returning port 0x496aa00
    9/5/08 1:20:07 PM kernel vmnet: Hub 0 does not exist, allocating memory.
    9/5/08 1:20:07 PM kernel vmnet: Allocated hub 0x496b000 for hubNum 0.
    9/5/08 1:20:07 PM kernel vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:ff:a5:00
    9/5/08 1:20:07 PM kernel vmnet: Hub 0
    9/5/08 1:20:07 PM kernel vmnet: Port 0
    9/5/08 1:20:07 PM kernel vmnet: bridge-en0: got dev 0x42b0204
    9/5/08 1:20:07 PM kernel vmnet: bridge-en0: up
    9/5/08 1:20:07 PM kernel vmnet: bridge-en0: attached
    9/5/08 1:20:07 PM kernel vmnet: VNetUserIfFree: freeing userIf at 0x496aa00.
    9/5/08 1:20:08 PM mDNSResponderHelper[89] "/etc/racoon/remote/anonymous.conf" looks familiar, will overwrite
    9/5/08 1:20:08 PM mDNSResponderHelper[89] racoon (pid=125) started
    9/5/08 1:20:10 PM com.apple.KerberosAutoConfig[127] Kerberos configuration is up to date
    9/5/08 1:20:12 PM mDNSResponder[16] registerserviceinstance: domain paul\.dyson.members.mac.com. already registered
    9/5/08 1:20:12 PM com.apple.KerberosAutoConfig[128] Kerberos configuration is up to date
    9/5/08 1:20:12 PM com.apple.KerberosAutoConfig[129] Kerberos configuration is up to date
    9/5/08 1:20:26 PM kernel AFP_VFS afpfs_mount: /Network/Servers/server.kennedydyson.co.uk/Volumes/Data/Users, pid 100
    9/5/08 1:20:28 PM loginwindow[33] Login Window - Returned from Security Agent
    9/5/08 1:20:28 PM loginwindow[33] USER_PROCESS: 33 console
    9/5/08 1:20:29 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[97]) Exited: Terminated
    9/5/08 1:20:29 PM com.apple.launchd[133] (0x103c10.AppleVNCServer[101]) Failed to add kevent for PID 101. Will unload at MIG return
    9/5/08 1:20:29 PM com.apple.familycontrols[132] ** [User findUserByID:1038 searchParent:NO] returned nil
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** [User findUserByID:1038 searchParent:NO] returned nil
    9/5/08 1:20:29 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d: option requires an argument -- n
    9/5/08 1:20:29 PM com.apple.familycontrols[132] 'Unknown argument given
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] 'Unknown argument given
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] Usage: /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k start -p <port> -n <username>
    9/5/08 1:20:29 PM com.apple.familycontrols[132] Usage: /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k start -p <port> -n <username>
    9/5/08 1:20:29 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k stop
    9/5/08 1:20:29 PM com.apple.familycontrols[132] Options:
    9/5/08 1:20:29 PM com.apple.familycontrols[132] [-X]: do not detach from console
    9/5/08 1:20:29 PM com.apple.familycontrols[132] [-v]: verbose
    9/5/08 1:20:29 PM com.apple.familycontrols[132] [-l]: create log file
    9/5/08 1:20:29 PM com.apple.familycontrols[132] Private:
    9/5/08 1:20:29 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k socket <socket_fd> <logfile_fd> -n <username>
    9/5/08 1:20:29 PM com.apple.familycontrols[132] ** abnormal termination of /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d (returned: 1)
    9/5/08 1:20:29 PM com.apple.familycontrols[132] ** httpsproxystart failed r:1
    9/5/08 1:20:31 PM com.apple.launchd[133] (com.apple.ReportPanic[155]) Exited with exit code: 1
    9/5/08 1:20:30 PM airportd[90] No networks found on channels remembered for belkin54g
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k stop
    9/5/08 1:20:30 PM airportd[90] Could not find "belkin54g"
    9/5/08 1:20:31 PM ReportPanic[155] Reading panic log failed with error: Error Domain=NSCocoaErrorDomain Code=257 UserInfo=0x107570 "The file “2008-07-29-160619.panic” could not be opened because you do not have appropriate access privileges."
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] Options:
    9/5/08 1:20:30 PM airportd[90] Could not find any preferred networks; trying broadcast requests..
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] [-X]: do not detach from console
    9/5/08 1:20:33 PM airportd[90] Broadcast requests also failed..
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] [-v]: verbose
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] [-l]: create log file
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] Private:
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[161] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k socket <socket_fd> <logfile_fd> -n <username>
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** abnormal termination of /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d (returned: 1)
    9/5/08 1:20:29 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** httpsproxystart failed r:1
    9/5/08 1:20:30 PM ARDAgent [154] ******ARDAgent Launched******
    9/5/08 1:20:31 PM mDNSResponder[16] registerserviceinstance: domain paul\.dyson.members.mac.com. already registered
    9/5/08 1:20:31 PM ARDAgent [154] ******ARDAgent Ready******
    9/5/08 1:20:34 PM airportd[90] Probing highest ranked networks via directed scan..
    9/5/08 1:20:37 PM kernel AirPort: Link Up on en1
    9/5/08 1:20:38 PM Dock[165] _DESCRegisterDockExtraClient failed 268435459
    9/5/08 1:20:39 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021C:B3FF:FEB2:4695); network traffic reduction measures in effect
    9/5/08 1:20:42 PM /System/Library/CoreServices/coreservicesd[83] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(medialocal's Public Folder) returned -14135
    9/5/08 1:20:42 PM /System/Library/CoreServices/coreservicesd[83] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Paul Admin's Public Folder) returned -14135
    9/5/08 1:20:43 PM com.apple.KerberosAutoConfig[183] Kerberos configuration is up to date
    9/5/08 1:20:44 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
    9/5/08 1:20:45 PM airportd[90] Error: Apple80211Associate() failed -6
    9/5/08 1:20:46 PM kernel AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
    9/5/08 1:20:46 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
    9/5/08 1:20:46 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021C:B3FF:FEB2:4695); network traffic reduction measures in effect
    9/5/08 1:20:46 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
    9/5/08 1:20:48 PM com.apple.familycontrols[132] ** trying to launch apache with but no username given
    9/5/08 1:20:48 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[148] ** trying to launch apache with but no username given
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper 2008-09-05 13:20:48.022 iCalExternalSync[185:10b] WARNING: restore save failed: Error Domain=NSCocoaErrorDomain Code=134030 UserInfo=0x175c10 "An error occurred while saving." {
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper NSUnderlyingException = Fetching maximum primary key failed;
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper }
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper 2008-09-05 13:20:48.041 iCalExternalSync[185:10b] WARNING: CalCalendarStore: restore failed: Error Domain=CalCalendarStorePersistenceErrorDomain Code=1 UserInfo=0x176b00 "Failed to rebuild the iCal database."
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper {
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper NSLocalizedDescription = "Failed to rebuild the iCal database.";
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper NSLocalizedRecoverySuggestion = "An error occurred while saving.";
    9/5/08 1:20:48 PM [0x0-0x11011].com.apple.iCal.helper }
    9/5/08 1:20:48 PM iCalExternalSync[185] WARNING: restore save failed: Error Domain=NSCocoaErrorDomain Code=134030 UserInfo=0x175c10 "An error occurred while saving." {
    NSUnderlyingException = Fetching maximum primary key failed;
    9/5/08 1:20:49 PM com.apple.KerberosAutoConfig[188] Kerberos configuration is up to date
    9/5/08 1:20:48 PM iCalExternalSync[185] WARNING: CalCalendarStore: restore failed: Error Domain=CalCalendarStorePersistenceErrorDomain Code=1 UserInfo=0x176b00 "Failed to rebuild the iCal database."
    NSLocalizedDescription = "Failed to rebuild the iCal database.";
    NSLocalizedRecoverySuggestion = "An error occurred while saving.";
    9/5/08 1:20:50 PM mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.35.3); network traffic reduction measures in effect
    9/5/08 1:20:50 PM mDNSResponder[16] SendResponses: No active interface to send: 04 17 Media\032Mac\032mini.device-info.tcp.local. TXT model=Macmini2,1
    9/5/08 1:20:53 PM [0x0-0x14014].SoftwareUpdateCheck[192] SoftwareUpdateCheck: non-admin user
    9/5/08 1:20:54 PM com.apple.launchd[133] ([0x0-0x14014].SoftwareUpdateCheck[192]) Exited with exit code: 102
    9/5/08 1:20:54 PM com.apple.KerberosAutoConfig[215] Kerberos configuration is up to date
    9/5/08 1:20:56 PM com.apple.familycontrols[132] ** [User findUserByID:1038 searchParent:NO] returned nil
    9/5/08 1:20:56 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/webfilterc tl[220] ** [User findUserByID:1038 searchParent:NO] returned nil
    9/5/08 1:20:56 PM com.apple.familycontrols[132] /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d: option requires an argument -- n
    9/5/08 1:20:56 PM /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d[223] 'Unknown argument given
    9/5/08 1:20:56 PM com.apple.familycontrols[132] 'Unknown argument given
    9/5/08 1:20:56 PM com.apple.familycontrols[132] Usage: /System/Library/PrivateFrameworks/FamilyControls.framework/Resources/httpsproxy d -k start -p <port> -n <username>
    Once loaded iCal does not respond and a "force quit" is the only option.
    I have looked at the logs in Server Admin and I can't seem to see any problems at about the same time.
    I would be grateful if someone could let me know whether this is a bug with the software or whether there is a solution. For the time being, the mac users are having to use portable home directories in order to allow them to use iCal.
    <Edited by Moderator>

    Hi
    I've not long ago spotted it. It is a longish log. I would sort out that problem anyway because it can't be good for that user.
    What needs to happen is a sampling of a the log server side when the problems occur for the clients. It would be a good idea if you posted a little more about how the server is configured. Are you using Server Preferences to administer the Server by any chance? What is the result of issuing this command from terminal:
    sudo changeip -checkhostname
    Post the result. Did the apple engineer configure internal DNS & DHCP Services to accommodate the web and ical services? Is the web service running? Are you using virtual domains? Are the client macs using the Server to resolve DNS?
    As you can see lots of questions. If you are using Server Preferences then I'm going to have to stop trying to assist you. Please don't think there is anything wrong with your server because you are using the application, because there is not. Neither is there anything wrong with the choices made by the original guy. It's just I don't deal with anything other than Advanced. I have little knowledge of Server Preferences. Please don't be tempted to 'convert' to Advanced thinking it may 'improve' matters. It's just as likely it will make things worse.
    Consider getting the original guy back in and having him do it for you again. Who knows you may find things will go a lot smoother this time?
    Tony

  • Pat is not working on my asa

    Hi there. 
    I just trying to do PAT with gns3. but not working and i don't have any idea.
    (Cisco Adaptive Security Appliance Software Version 8.4(2))
    and also i figure out that there are some changes in nat configuration. i did but didn't work. 
    I cannot ping from my host 192.168.100.116 to 1.1.12.1 ~ 1.1.12.2, 8.8.8.8 
    i turn debug in R1 and i can see the icmp. 
    R1#
    *Mar  1 01:31:28.091: ICMP: echo reply sent, src 1.1.12.1, dst 10.10.10.1
    R1#
    *Mar  1 01:31:32.739: ICMP: echo reply sent, src 1.1.12.1, dst 10.10.10.1
    R1#
    And also can see xlate on ASA
    ASA-1# sh xlate
    1 in use, 9 most used
    Flags: D - DNS, i - dynamic, r - portmap, s - static, I - identity, T - twice
    ICMP PAT from inside:192.168.100.116/1 to outside:10.10.10.1/6370 flags ri idle 0:00:04 timeout 0:00:30
    ASA-1#
    This is my topology. 
    [ASA1]
    ASA-1# sh run ip
    interface GigabitEthernet0
     nameif outside
     security-level 0
     ip address 10.10.10.1 255.255.255.0
    interface GigabitEthernet1
     nameif inside
     security-level 100
     ip address 10.10.20.1 255.255.255.0
    ASA-1# sh run object network
    object network obj-192.168.100.0
     subnet 0.0.0.0 0.0.0.0
    ASA-1# conf t
    ASA-1(config)# ob
    ASA-1(config)# object net
    ASA-1(config)# object network obj-192.168.100.0
    ASA-1(config-network-object)# nat (in
    ASA-1(config-network-object)# nat (inside,ou
    ASA-1(config-network-object)# nat (inside,outside) dy
    ASA-1(config-network-object)# nat (inside,outside) dynamic inter
    ASA-1(config-network-object)# nat (inside,outside) dynamic interface
    ASA-1(config-network-object)# end
    [R4]
    interface FastEthernet0/0
     ip address 10.10.20.254 255.255.255.0
     duplex auto
     speed auto
    interface FastEthernet0/1
     ip address 192.168.100.254 255.255.255.0
     duplex auto
     speed auto
    no ip http server
    no ip http secure-server
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 10.10.20.1
    [HOST]
    ip address 192.168.100.116/24
    [R1]
    interface FastEthernet0/0
     ip address 10.10.10.254 255.255.255.0
     duplex auto
     speed auto
    interface FastEthernet0/1
     ip address 1.1.12.1 255.255.255.0
     duplex auto
     speed auto
    no ip http server
    no ip http secure-server
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
    what am i mssing ?
    please corret me. 
    Thank you in advance. 

    just reload... .. i'm still stuck in the ping. 
    changed topology more simple. but still not working. 
    Here is all what i did. 
    [ASA]
    access-list ICMP extended permit icmp any any echo-reply
    access-list ICMP extended permit icmp any any time-exceeded
    access-group ICMP in interface outside
    interface GigabitEthernet0
     description To_UP
     nameif outside
     security-level 0
     ip address 10.10.10.2 255.255.255.0
    interface GigabitEthernet1
     description To_DOWN
     nameif inside
     security-level 100
     ip address 10.10.20.1 255.255.255.0
    [R1]
    interface FastEthernet0/0
     ip address 10.10.10.1 255.255.255.0
    ip route 10.10.20.0 255.255.255.0 10.10.10.2 (I don't think i need this)
    [R4]
    interface FastEthernet0/0
     ip address 10.10.20.2 255.255.255.0
    ip route 10.10.10.0 255.255.255.0 10.10.20.1 (same as well)
    [outout tracer]
    ciscoasa# packet-tracer input inside icmp 10.10.20.1 8 0 10.10.10.1
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   10.10.10.0      255.255.255.0   outside
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: DROP <---??????????????????????????
    Config:
    Implicit Rule
    Additional Information:
    Result:
    input-interface: inside
    input-status: up
    input-line-status: up
    output-interface: outside
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (acl-drop) Flow is denied by configured rule
    ciscoasa#
    [ASA]
    ciscoasa# show access-list
    access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 4096)
                alert-interval 300
    access-list ICMP; 2 elements; name hash: 0x2d2cf426
    access-list ICMP line 1 extended permit icmp any any echo-reply (hitcnt=0) 0x0b307247
    access-list ICMP line 2 extended permit icmp any any time-exceeded (hitcnt=0) 0x1e6b1395
    ciscoasa#
    I created acl and permit it
    Thank you. 

  • HP LJ 2015d driver not working in Win7

    I have an HP Laser Jet 2015d with a duplex feature that is not recognized by the default Windows 7 driver.  It indicates a manual process for duplex printing.  I have the original disk, but it will not work in Windows 7.  Tried to load the driver from HP, but can't determine the folder for the actual driver. Can anyone please help?

    You may need to configure the driver so that it knows that a duplex unit is present on the device (assuming that one is present and physically working).
    On the Printer properties dialogue, select the Device settings tab, and ensure that the duplex unit is set to Installed, rather than Not installed.

Maybe you are looking for

  • Operation could not be completed?

    I keep getting this error Operation could not be completed, not enough space on disk cs2 xp pro 3 gig ram 20 gig open on c drive 296 gig open on G drive c drive set as first scratch g set as second current file is 16 x 20 at 300 dpi hmm what else....

  • インストールでエラーが発生しました. adobe cs 5.5 master collection [ERROR: Install MSI payload failed with error: 1620]

    Adobe creative suite 5.5 Master collection をインストールしようとしたところ.2枚目のCDをいれたところで.下記のようなエラーが出て.インストールできません. (エラー内容が多いので.最下部に表示します) どのようにしたら.インストールできますでしょうか? 再起動し.何度.インストールしても.同じ結果となります. なお.パソコンの環境は以下のとおりです. 宜しくお願いします ■■■■■■■インストール環境■■■■■ Windows 7 Professio

  • How can I assign a function key on my IMAC's wired keyboard to enter my email address in documents or on internet forms?

    I'm trying to set up my wired IMAC keyboard to create shortcuts to enter my email adresses into emails or into web forms.  I was able to do this when I was working with PCs but can't find direction on the process for the MAC.  There seems to be 7 unu

  • Help Recreating Drop Shadow Effect from Clipping Mask

    A few months ago I created the image attached. Today for the life of me I cannot create a similar effect, where the drop shadow of the text comes from the clipping mask. Everytime I try to follow the same steps and layer styles I keep getting a norma

  • Question for ipod in itunes

    i downloaded the new itunes and ipod updates and i usually just plug my ipod into the computer and listen to my ipod in itunes and i dont keep any songs in itunes to save space but i cannot figure out how to listen to my ipod in itunes now if anyone