Duplicate Appraisal Created

hi,
In this scenario, when I create an appraisal for a person thru the report phap_admin_pa, am getting two appraisals created for a person. Out of the two appraisals one is the old manager and other is the new manager. but the old manager is already terminated but still appraisal is created , how to solve this.
Kindly help.
Regards,
Jenni
Edited by: Indumathy Ravindran on Oct 3, 2008 8:08 AM

English :
The first exception, which led to it that the Request failed, was: Invalid program mode: Duplicate more member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343

Similar Messages

Duplicate Messages created on target with Multimapping(No BPM)

Hi
I am working on PI7.1 .
My sceniro
IDOC to JMS using message split
Receiving IDOC with Header and Items, PI splitting IDOC and sending to Multiple JMS queues, Header segment data to header queue, Item segment data to Item queue
PI Successfully Posting data to Queues, but duplicate messages creating on target sys(One IDOC with one header and one item date, PI sending 2 header messages , two item messages to target sys) .
I did following steps
ESR
1. Created two target messages
2. Created Two target inbound interfaces
3. Created Message mapping using with multiple target messages, changed signature occurrence to 0 : unbounded , and mapped to source node to target nodes
4. Created operation mapping with one source to two target interfaces
EB
1. Created one business components and assigned one sender and two receiver service interfaces
2. Created Two receiver communication channel
3. Created One receiver determination
4. Created One interface determination , added two inbound interfaces with one operation mapping (Multiplicity is blank )
5. Created two receiver agreement
Please help .

Thanks Gouri ,
My IDOC structure (Source Message Type)
HEADER_SEG Node (0:9999) -
> MT_HEADER ( 0:unbounded) (this one of target message type)
                                                                HEADER_FLDS (Element - Main hierarchy)
         FLDS----
> FLDS
ITEM_SEG Node (0:9999) -
>MT_ITEM(0:unbounded ) (this is another message type)
                                                                ITEM_FLDS (Element - Main hierarchy)
         FLDS----
> FLDS
I tried with the below mappings
                HEADER_SEG Node -
>MT_HEADER
                HEADER_SEG Node -
> HEADER_FLDS (element )
                ITEM_SEG Node -
>MT_HEADER
                ITEM_SEG Node -
> ITEM_FLDS (element )
2. method
                HEADER_SEG Node -
>MT_HEADER
                                                       HEADER_FLDS (element )(not mapped)
                ITEM_SEG Node -
>MT_HEADER
                ITEM_SEG Node   ITEM_FLDS (element )(not mapped)

Duplicate member created

Hello,
I get the following error message when I execute my query with the query designer. Curious is, when I execute the query and don´t choose a value of the variable "debitor" I get a list of all debitors and other characteristics, keyfigures but when I choose one debitor of the variable who was also in the list before I get the error message. ZCUSTFI1 is the name of the InfoObject, where I get my master data.
Have somebody an answer herone?
The error:
Die erste Ausnahme, die dazu geführt hat, dass der Request fehlgeschlagen ist, war:
Ungültiger Programmzustand: Duplicate member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343
com.sap.ip.bi.bics.exceptions.BicsProgrammErrorException: Invalid program status: Duplicate member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:310)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:594)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:535)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.getMembers(ProviderInfoObject.java:964)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.getMembers(ProviderInfoObject.java:912)
Thanks.
Michael

English :
The first exception, which led to it that the Request failed, was: Invalid program mode: Duplicate more member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343

Duplicate columns created in attribute view

Hi
I created an attribute view as shown in the video Creating an attribute view | SAP HANA using the data given. After creating the attribute view as per the video, when I preview the data in the attribute view, I see that all the columns are created twice. For instance there is Company Name and Company Name 1, Contact_Name and Contact_Name1, ContactTitle and ContactTitle1 and so on. This has happened for all the fields.
I checked the table in the schema to see if there are duplicate fields there. But the DIMSupplier table in the STS schema has no duplicate fields.
What I want to know is how were these duplicate fields created in this attribute view and how do I remove them? I checked the output fields and there also there are no duplicate fields.
When I right click on the attribute view and select data preview, and then under the tab "Distinct Values" I can see all these duplicate field names. I am trying to delete these duplicate field names but I am getting an error message that the field you are trying to delete is being used elsewhere hence it cannot be delete.
Can anyone please advise how to fix this error.
Thank you.
Regards,
Pavan.

Hi Anjali,
Thanks a lot for your reply. But in my data foundation STS_ATTRIBUTE_VIEW, I do not see any duplicate columns to remove them. Today I see a warning and also I am unable to right click on the attribute view.
The warning is given below:
Message :
STS.STS_ATTRIBUTE_VIEW: one or more columns of Table: DIMSUPPLIER have invalid ABAP name
But in the Data Foundation in the Output tab under Columns I do not have any duplicate columns listed.
Also the attribute view is in grey color. Its not in green color even after clicking on Save and Validate and SAve and Activate.
I select the attribute view and hit on the data preview button. There in the Analysis tab under Available objects under String folder I can see all these duplicate column names. I right click on the duplicate column names and I see the options "Distinct Values", "Add to labels", values, filters and "Properties". Having selected the column name I hit on the delete button on my keyboard but nothing happened.
Is this because of the warning that I am getting. What does this warning mean?
Please advise.
Thank you.
Regards,
Pavan.

Duplicate IDOC created for basic type PEXR2002

Hi,
We are using PEXR2002 idoc for some document postings in FI. For a segment EIEDP02, when trying to write a BELNR field value which exceeds its size of CHAR 35. Its creating a duplicate segment with same key value. Because of this, the idoc not getting created and ends up in error.
Could you please anyone help me in this regard?
Thanks and Regards,
Vimala P

Hi,
In our process, the EIEDP02-BELNR value is actually filled with document text field value which is of length more than 35. What is happening right now is, if the length of document text having more than 35 characters and then with first 35 character of BELNR value one segment is created. And it again create one more segment EIEDP02 with BELNR value having the rest of the fields value(>35 characters). Thus creates duplicate segments which results in IDOC creation failure
Thanks and Regards,
Vimala P

Appraisal Create -- Performance Management

How do you implementat a "delegate" role in Performance Management?
The scenario is like this :
The manager has over 100 employee's in her team. The appraisal documents are created in batch in the beginning of the year.
The manager identifies the team lead (four) of them, to conduct the appraisal for their team member's.
Currently we are not able to do delegate that responsibility.
In the appraisal document, we are not able to display the "delegate - appraiser". Nor, can a "delegate-appraiser" (when she logs-in) able to see the appraisal documents created by the manager and delegated to her.
The "delegate-appraiser" logs-in using the BSP documents_todo.htm. Or should a different BSP be used?
Thanks

Are you on ECC 6?
If yes there is a new Enhancement pack 4 comming with new functionalities for MBO , you can check out the features, i feel there are a few features matching your scenario , it may not be a perfect match, still check it out.
Regards
Sameer

Duplicate columns created in Document Libraries

Hi,
We are having issues with duplicate columns being created in document libraries after copying/moving documents between libraries (SharePoint 2013):
Unable to find any users with similar issues on forum
Thanks in advance
K

Duplication has been sort of a thing for us as well. On our SP public site images will start duplicating themselves. I am not sure if it's because of different libraries running in the background, but it is very annoying.
I'm not sure if these two cases are connected, but I thought I'd post so you knew you weren't alone in this strange behavior.

Duplicate files created after library consolidate library

I have been trying to clean up everything. I have several iTunes libraries. The one I have selected in preferences is on an external HD, it was up and running. I went to library>consolidate library. When I went to look at the actual files in my selected ext. HD iTunes folder, nearly EVER song (several 1000's) had a duplicate, tune.mp3 and now tune 1.mp3. ***??? Where did they come from? Did iTunes gather all of the files up from other itunes folders & copy them???
How do I get rid of the duplicates?
What a mess...
They don't show in the iTunes window. Just in the file folder.

Hi,
Then you may need to monitor the behavior to see if you can find out the cause.
First you can enable Audit on that folder to get the account who create the /1 file. You need to set Audit in 2 settings:
1. Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
2. Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
Also you can try Process Monitor to see if you can capture the exact process when the file is created. However as the issue occurs randomly it may take your time to get an accurate trace.
Troubleshooting with Process Monitor
http://blogs.technet.com/b/askperf/archive/2007/06/01/troubleshooting-with-process-monitor.aspx
If you have any feedback on our support, please send to [email protected]

Duplicates being created during import

When I import pictures from iphoto to Aperture 2.1 duplicate files are created. Actually it imports the original as well as the edited version of a picture. They have the same file name and appear in the film strip area as pairs and when I scroll through them with the arrow keys it goes through all of them, as opposed to skipping from version to version. How can I do this right so that it functions like iphoto (you only see and navigate with the versions and the originals are hidden somewhere out of sight unless you revert back to it)? On a second set I imported, I checked "Do not import duplicates" but had the same problem.

They're not duplicates.
When you edit a photo on iPhoto the app preserves your Original imagae and performs the edits ona copy of the file. So you have two versions of the pic - the original and the edited. If you import the iPhoto Library then you get the iPhoto Library, which includes both versions.
If you want only one version go File -> Show iPhoto Browser and drag over the pics from the resulting media browser. This will get the current version of the pics. If you want import the original, then in iPhoto go File -> Export, set the kind to 'Original' and export. Then import to Aperture.
Regards
TD

Duplicate entries created with CMP

My question is: Should CMP container maintain the primary key field?
I created a client program to create a number of CMP objects and execute
some finder methods.
If I executed the client program again, it would try to create the
same CMP objects again. I thought I would receive some duplicate key
exception but I didn't get any exception. Looking at the DB, I found
the duplicate entries. Why?
Then, I modified the client program to do a findByPrimaryKey() and
an exception is caught saying that duplicate key found in DB.
(This is expected as duplicate rows did exist in DB.)
I am using weblogic 6.1.
Thanks,
Terrence

If your client code is written correctly and you use the correct isolation
level, you will not get duplicate keys.
If your database is configured with the correct constraint, you will not get
duplicate keys.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Terrence Leung" <[email protected]> wrote in message
news:[email protected]..
My question is: Should CMP container maintain the primary key field?
I created a client program to create a number of CMP objects and execute
some finder methods.
If I executed the client program again, it would try to create the
same CMP objects again. I thought I would receive some duplicate key
exception but I didn't get any exception. Looking at the DB, I found
the duplicate entries. Why?
Then, I modified the client program to do a findByPrimaryKey() and
an exception is caught saying that duplicate key found in DB.
(This is expected as duplicate rows did exist in DB.)
I am using weblogic 6.1.
Thanks,
Terrence

Duplicate photos created by Elements

Hi
I've run into the problem of Elemenst creating duplicate photos -- has anyone else seen this. Here's how it happened: I took some new photos and plugged in my camera. I have the option set in "Preferences" to "Copy New Files Only". However, when Elements proceeded to do its stuff..... instead of saying "I found 15 new photos" it proceeded to reload (as new) everything on the camera card. Now, when I look in the "shot date" directories, I have duplicates of all photos -- such as, DSC_0054 and DSC_0054-1; DCS_0055 and DSC_0055-1 etc etc etc... so now I have 1000 photos in my catalog whereas I only have 500 untique photos on my camera card. This is not the first time I've seen this behavior, but this time I'm positive that the duplicates didn't result from something I did ..... I saw Elements re-load those 500 pictures. Is this a bug? Is there anyway I can prevent it from happening again....

I have the option set in "Preferences" to "Copy New Files Only". However, when Elements proceeded to do its stuff.....
Is your problem resolved?
When you re-imported the pics from the card, was the path selected to copy the files same as when you imported before?
If not, then do not change the path while importing again and re-import the files selecting the "Copy New Files Only" option.

Duplicate delivery created against SA

Hi all,
We have peculier situation where in a duplicate outbound delivery got created with same item and same qty for schedulling agreement. The delivery was processed through VL10F. There is 2 min of diff in time for the original and duplicate delivery creation . Any body has come accross kind of issue.
How to avoid this and what could be reason for the duplication. Please help in this regard.
Thanks

Hi
It is a very simple task for your ABAper.
You can take ABAP help.
Regards
KRSNA

Duplicate tasks created after reboot

Hi,
I am using a Windows Server 2003 R2 Standard Edition.
This server needs a reboot every month. But after a reboot, there is a particular task which fails to start as duplicate tasks are created. This task is scheduled to run hourly. But as soon as i reboot the server it fails. This task runs a Download.bat file
and a file is created every hour.
I have to delete these duplicate tasks and then the task runs fine.
Can anyone help me with this. I don't want duplicate tasks to be created after the reboot.

Hi Arjun Ks,
It seems is the task scheduler is triggering the task but the second instance is not able to execute.
The task scheduler is seeing another instance still running and hence unable to trigger the second instance.
May the task needs to run in a loop, I suggest you try
the below options:
“Run a new instance in parallel”
"Stop the existing instance”
More information:
Task Monitoring and Control
http://technet.microsoft.com/en-us/library/dd315533(v=ws.10).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Duplicate folders created

I am a new Aperture 3 user and after doing the Apple Pro Training set aperture as my default program for new photo's. Each time I import a new set of photo's a duplicate folder is created in my documents. (I assume these are duplicates since I import into my aperture library). Can these folders be removed?

1stresponder wrote:
I am a new Aperture 3 user and after doing the Apple Pro Training set aperture as my default program for new photo's. Each time I import a new set of photo's a duplicate folder is created in my documents. (I assume these are duplicates since I import into my aperture library). Can these folders be removed?
In the Aperture Pro Training book in the lessons on import they have you create a backup of your images on import (pg 183). The lesson has you backup your images to the Documents folder. I'm betting you still have that turned on.
If you don't want the backups you can delete them but making a backup on import is a great feature.

People Recognition: Duplicate Tags Created

In going through the process of identifying and confirming names and faces in People Recognition, the organizer will sometimes create a new tag that is identical to an existing tag, even when I have selected the existing tag from the list of suggestions. Having more than one tag for a given person causes chaos. Anyone have an explanation and/or solution? Thanks

You can merge/delete duplicates.
Select the Media tab in Organizer and on the top menu click:
View >> Show People in Tag Panel
Click on one of the duplicate names (use the right pointing symbol) and then use Ctrl+A or shift-click to select all of the chosen images.
Then drag the correct name from the tag panel and drop on to one of the highlighted images. That will mark them all; so they should have both tags .
In the tag panel click on the one you wish to delete and use the minus button or delete key to get rid of it.

Duplicate Appraisal Created

Similar Messages

Maybe you are looking for