Duplicate assigned value for Asset
Hi Experts,
Thanks for the reply the solution to reverse payment, then rev MIRO with MR8M, and rev MIGO with MBST. And then do ammendments to the PO.
But the Invoice already done payment, document had been posted.
Can we still proceed the adjustment ?
thanks.
rgds,
tee
Hi,
I read your earlier message just now.
If you want record this into small assets, you can do as below.
You can do ABUMN ( Asset transfer within company code with partial transfer option). This will take care of depreciation posted earlier with right proportion and transfer to small assets)
Best Regards,
Madhu
Similar Messages
-
Which table contains net book value for Assets created with AS91.
Which table contains net book value for Assets created with AS91.
I have a problem locating where the net book value is stored in SAP. Is it simply calculated and not stored in any one place? I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on. If it is stored in a table some place, can anyone please let me know!
Thank you allHi anar.samadzade & Michael Stewart
It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
Gross Block & Accumulate Dep you will get from Table: ANLC
http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
Dear anar.samadzade Ask Questions politely
Regards
Viswa -
How to assign values for more than one field
Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
Assign (fieldname) to <l_field>.
<L_FIELD> = 'ZB'. " value according to your requirement
Assign (fieldname1) to <l_field1>.
<L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
BrahmajiHello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD -
Assign value to asset under construction
Hi Sirs,
I would like to know what i have to do to solve the problem with value for asset under construction. When I create asset with tr. AS91 in area for Takeover values, the field for ***.acquis.val. is not active.
Thank you in advance.
Regards,
DaniHi Dani
I assume that you have maintained the takeover date and period for last depreciation posted in the old system. Apart from this you have to make sure that the capitalisation date in asset master should be prior to takeover date, In order for system to recognize that asset is a takeover asset this is very important. when all the input fields are greyed , this means system does not determine it to be an old asset which it derives from cap date.
Rgds,
Zub -
How to assign values for boolean array in LabVIEW?
I want assign values for boolean array.Iam not able to do that.For each boolen i want to assign each value.Plz help me......
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.Hi agar,
values in an array are "assigned" by building an array (using BuildArray) or by replacing values in an existing array (ReplaceArraySubset)!
Good starting point could be this...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Assigning value for an integer
i'm having two jsp pages. i pass value from one jsp page to another jsp.
when i try to assign value for an integer, it is taking the default value. it is not taking the value what i assign. for string its taking correctly.
this is the query string.
document.book.action="cis1.jsp?lstr_bname=<%=lstr_bname%&lint_mss=<%=lint_mss%">
here for lstr_bname it is taking the value. but not the case for lint_mss.(taking default value).Try this
document.book.action="cis1.jsp?lstr_bname=<%=lstr_bname%&lint_mss=<%=Integer.toString(lint_mss)%">
Bye -
Assign values for Application items
Hi,
I have some application items to which I want to assign values querying from a database table based on the user logged in. I have created an application process which does that. What process point I need to select so that the values in application items are available through out the session?
Thanks,
AshaAsha:
I have been able to reproduce this issue. The application process appears to fire for every 'new' session-id. This explains the 'no data found' when you navigate to the application's login page. What is weirder is that APEX re-uses the session-id created when presenting the login page and therefore the application process no longer fires ! This needs more research. Clearly, my understanding of the the 'On New Session - After Authentication' is inadequate.
In the meanwhile you can move the code you have for the application process and and use it as a 'Post-Authentication Process' for the application's authentication scheme.
Varad -
"non assigned" value for Calender year quarter not possible
All of us know that we can not assign "#" value to calender year quarter.
In my planning level (which is a part of multi planning area consinsting 2 cubes, Actual COPA cube and Plan COPA cube), I want to copy data from Actual copa cube to plan copa cube using planning function of formula type, but actual copa cube is not getting populated against calyear quarter.
I want to retain calyearquarter as a characteristic in my level as it is acting as a key to my plan data. What shoould be done in such a scenario?santoshkumar,
I would suggest you build a characateristic relationship exit on calendar year quarter, probably based on fiscal year period or 0calmonth.. Make sure you leave Calendar year quarter out of your planning level in the copy so it would derive it.
Hope this helps,
Mary. -
Calculate Net Book Value For Asset
Hi Guru,
how I Can Coding Program for calculate Asset Net Book Value ( Function Module or Formula)
Regards,
Supperkornuse :
(1) logical database ADA and structure anlcv
or
(2) fm FI_AA_VALUES_CALCULATE
field anlcv-lfd_bchwrt for current NBV
hope that helps
Andreas -
Which table or combinations of table that stored net book value for asset?
I need help in finding the above. I need to customize an asset report and need the net book value amount.
hi Mohamed,
basically you have to calculate like this:
+ ANLC-KANSW
+ ANLC-KAUFW
+ ANLC-KINVZ
- ANLC-KNAFA
- ANLC-KSAFA
- ANLC-KAAFA
hope this helps
ec -
Any way to assign value for variable of type Class List String ?
I'm puzzled why I can declare a variable:
Class<List<String>> clazz;but I cannot assign a value to it as
clazz = List<String>.class;The compiler also complains about
Class<List<?>> clazz0 = List<?>.class;yet it has the nerve to warn about raw types when I give up and use
Class<List> clazz0 = List.class;Even using a dummy instance does not work.
List<String> dummy = new ArrayList<String>();
Class<List<String>> clazz1 = dummy.getClass();I only care because I've declared a method like
public String useless( Class<List<String>> unSetable){
return unSetable.getName();
}And now there seems to be no way to call it.Hello chymes,
there is no way to get an instance of Class<List<String>> without at least one unchecked warning. Otherwise you could get away with the following:
List<Integer> ints = new ArrayList<Integer>();
Class<List<String>> clazz = List<String>.class;
List<String> strings = clazz.cast(ints);
strings.add("No Good");
int i = ints.get(0); // CCETherefore the only way to get it is via unchecked cast:
Class<List<String>> clazz = (Class<List<String>>) (Object) List.class;With kind regards
Ben -
(10.1.2.0)Duplicate index value for ViewLinkAccessor in EO
Hi,
I did some major re-work on the model/data tier EO/VO/ViewLinks. The EO's used to be synchronised with the DB with PK/FK assoc etc. We have been struggling with accessor naming on FK associations in the BC4J for some time now and decided to remove all the constraints from the BC4J layer.
We created a reference DB schema that doesn't contain all the constrants etc. I then systematically decoupled the associations from ViewLinks/Views/EO's etc.
This in itself was quite a task since "Sync with DB" doesn't work straight out of the box.
Every reference is out and all classes compile.
I noticed that some of the VL accessors in one of the EO's are incorrect/missing.
When editing the ViewLink and setting the accessors the following:
1. Some VL's create the accessor but causes the ones already defined to get a dup index.
eg. Attribute "myViewA" has index 10, Attribute "myViewB" has index 11
I insert Attribute "myViewC" Through the VL editor and it inserts the accessor at index 10 causing "myViewA" to become 11. BUT "myViewB" has index 1.
2. Some VL's dont insert the accessor attribute when ticked, it inserts an empty line.
Whats cooking here?
BuksD'oh! Search first, ask questions later...
It's a known problem according to Metalink, patch 5064981 should solve it.
Sorry.
Arjan -
Delete duplicate column values for
Hi All,
My internal table contains the fields as no and text.The no is repeted but the text changes. so how to delete the no which is repeated again in the internal table.
for eg:
No Text
1 Text1
1 Text2
2 Text3
i need to replace the second column No as ' '.
Thanks
Yogesh.try this out..
types: begin of typ_itab,
no(2),
text(5),
end of typ_itab.
data: itab type table of typ_itab,
rec_tab like line of itab,
w_old(2).
rec_tab-no = 1.
rec_tab-text = 'test1'.
append rec_tab to itab.
rec_tab-no = 1.
rec_tab-text = 'test2'.
append rec_tab to itab.
rec_tab-no = 1.
rec_tab-text = 'test3'.
append rec_tab to itab.
rec_tab-no = 1.
rec_tab-text = 'test4'.
append rec_tab to itab.
loop at itab into rec_tab.
w_old = rec_tab-no.
if sy-tabix gt 1.
if rec_tab-no = w_old.
clear rec_tab-no.
modify itab from rec_tab index sy-tabix.
endif.
endif.
endloop.
loop at itab into rec_tab.
write: / rec_tab-no,rec_tab-text.
endloop.
~Suresh -
FM/BAPI for assigning a class and value for the class instead of manually d
Hi guys,
Instead of manually adding equipment class and assigning value for the class added can i get a FM or BAPI.
this is for transaction IE02.
rewards will be given.Hi
I hope this thread can help you
Characteristic Value
Re: Equipment Characteristic Value
Change Equipment Using Transaction IE02
Regards
pavan -
In OAYI, I set 1usd(Set memo value per company code/depreciation area)
and In asset master, i set 0 usd(additional specifications in depreciation area tab)
So, this asset's memo value(or scrap value) is 1 usd or 0 usd ??
what's is right?
I guess 0 usd is right, but it's memo is 1 usd(in AW01N).
my mistake??Hi ,
The purpose of a memo value is different from that of a scrap value.
<b>Memo Value</b> - The memo value is the residual value which u want to reflect in the balance sheet. Usually you do not need to manage memo values, since Asset Accounting (FI-AA) always manages gross values. This means it records both the acquisition value and accumulated depreciation, not just the net book value of assets. In this way, the system guarantees that even fully depreciated fixed assets appear in all legally required reports, even if they have a net book value of zero.
<u><b>Scrap Value</b></u> - It may sometimes be necessary to depreciate assets not to net book value zero, but only up to a scrap value or cutoff value. Therefore, the system enables you to set up a time-dependent scrap value for assets per depreciation area. There are two ways of specifying the scrap value:
● By assigning a scrap value key to the depreciation key used in the depreciation area
● By entering an absolute scrap value in the asset master data for the depreciation area
If you enter both an absolute value and a percentage, the standard system uses the percentage rate. SAP recommends that you always enter a percentage rate.
Hope this response provides you a more holistic view of both the options. Please reward points as a way of sayinbg thanks.
Cheers
Kartik
<u></u>
Maybe you are looking for
-
Do I need 'reactivation'? how to do it? EDGE not working...
I have a vodafone locked iPhone 3G in India and have subscribed to an EDGE plan for prepaid here in Mumbai. It used to work fine so far now all of a sudden EDGE has simply stopped working. THE dodos at vodafone keep on transferring my call so am sure
-
I have an Ipod classic 80gb about a year ago I bought an A/V composite cable and it worked great until a month or so ago now I can only get audio and not video I don't want to by another one since it's 50 bucks and I ain't got dime to my name what a
-
Help with iTunes ERROR: duplicate file name specified - where/how?
When starting up iTunes (version 10.6.1) I get an error message: Duplicate file name was specified. Needless to say, no clue as to what file name it is referring to. Furthermore, there are 5 songs which I can not play, bought from the iTiunes store.
-
Alsa problems even after following guides
i really can't get alsamixer or any type of other sound device to work. when i'm root, i can listen to music and anything else. when i'm a normal user and i type 'aplay', i get this: aplay: main:507: audio open error: Permission denied when i play a
-
Why won't my itouch show up in itunes or under my computer?
When i plug my itouch into my computer, it shows that it's charging but nothing pops up that it's been plugged in and it doesn't show up in my itunes. My itouch and itunes are both up to date. I've already tried unistalling itunes and reinstalling it