Duplicate audio information

Buenas tardes,
he creado una página de audio con iWeb que contiene diversos archivos obtenidos desde mi disco duro, como hipervínculos. Ahora quiero crear otra igual,con los mismos archivos sin que se dupliquen, o sea, que se redireccione un cuadro de texto (por ejemplo) a los archivos de audio de la primera página que ya se encuentran en la carpeta "web" de mis disco duro ya publicada. No quiero que se duplique la información, pero resulta que en el momento de publicar el "web site" en la carpeta "web", se duplica la información y aparecen los mismos archivos en las dos páginas, dentro de mi carpeta web del disco duro.
¿Cómo puedo hacer que no se dupliquen los archivos de audio y que aparezcan en una sola carpeta?
Gracias

Hi Lin,
1. I use Adobe Creative Cloud and check for updates everyday before I startup Prelude. I am not sure what version I was using 4 months ago, but I am using at this time the most current version.
2. I did transcode the H.264 footage in the .MTS container as Prelude will not allow subclips unless transcoded. I used transcode Format: H.264 and checked the Preset: match source - hi-bitrate. Transcoding as well as audio syncing were all done within Premiere.
The audio was not mono, as I edit with headphones and checked my audio when syncing audio with Premiere before ingesting into Prelude. I went back and double checked my Premiere Audio-Syncing Project File and it is set to stereo.
All of my footage was ingested four months ago and since then I have just been organizing in bins and making subclips. The audio tracks seem to be fine it was just concerning to see another muted audio track on all the footage appear all of a sudden.
I uploaded a screenshot for you to check out. This is the link as the insert picture and link does not work on the forum.
http://i.imgur.com/Is80Ysq.jpg
My concern is whether or not this will become an issue when sending to Premiere for editing.
Thanks!

Similar Messages

  • I'm new to Itunes and I accidently purchased duplicate audio books .Can I cancle before the second book downloads?

    Is it possible to cancel a duplicate audiobook download ?Didn't realize it wad downloading and reordered same book.

    Same problem.After 30 min figured it out.
    For me:
    hooked up iphone 5 to imac
    Updated ios7
    updated itunes
    downloaded audible.com app and signed in/registered
    went to books tab on iphone while still plugged in
    manual dowload selected audiobooks on syn audiobooks.
    sync and dowload onto iphone
    turned off iphone
    restarted
    audiobooks were under more in music icon on iphone.
    Rather long and silly-but worked.Just had to now redownload all my music as it erased music.
    Seems you can not manually sync music,and audio books-its one or the other.When you click on,the other goes off.Just had to do it sequentially.What made apple a great company seems to be slowly eroding.

  • How to DETECT DUPLICATE AUDIO files within a SEQUENCE?

    Hi...
    I'm working on a 45:00 sequence which is wall-to-wall music...
    Unfortunately, I've had to recut it so many times that some of the music tracks are repeated. I need to eliminate them.
    I love the "show duplicate frames" setting in the sequence (for video), is there a similiar setting for audio?
    In Avid, there's a 'reverse match frame' button which allows one to load a clip into the viewer and then see where it appears throughout the sequence.
    Does fcp have anything comparable? Any workaround for this?
    Thanks,
    Mark

    Pressing F will match the Playhead from the Canvas to the Viewer when the Canvas or Timeline is the active window and from the Viewer to the Canvas when the Viewer is the active window.
    Shift F will locate the source clip in the Browser
    Turning off Auto Select for the video tracks in the Timeline will match back to an independant audio track -for instance a piece of music, when you press F.

  • Duplicate audio track

    Hi,
    I have a video clip that when I dropped it in my timeline dropped video and audio on only A1. I need two audio tracks and I have unlinked the video from the audio and tried to copy and paste it into the timeline on the A2 track to no avail. I've tried to duplicate the track and the duplicate option is grayed out on the menu. Can anyone help me get this audio track duplicated and onto the A2 track please?

    I transferred it in from the external drive. It's red camera footage, so when I drop it in the timeline the audio shows up on one track. I'm working behind another editor, and he has all of the audio duplicated, so I'm trying to follow suit.

  • Duplicate audio channel

    I recently recorded a wedding with my DV camcorder. I used a lapel microphone as the audio (connected to my camcorder's mic input jack). Unfortunately, this audio is only heard from the left speaker. I would like it to be heard from both left and right.
    I have at my disposal various versions of iMovie, but am willing to use whatever A/V editing software (prefer inexpensive solutions) to be able to duplicate the audio into the right channel.
    Any recommendations?

    FCP supports both Mono and Stereo Pair tracks. If you have a single (mono) track, why do you need to duplicate the channel? Two channels of the same material is still mono (even if you pan one to the left and the other to the right.)
    Why not simply pan the one track to center and be done?
    x

  • Can numbers detect duplicate date information as I enter it?

    Hi. I need to take an inventory of over 4,000 film can that we have in our vault. First I need to go though get basic information from each can. I created a simple spreadsheet in numbers to track this information. We are tracking these cans by the date on the side of each one. Most of these dates are unique, but there may be some duplicates. What I need is some way for the spreadsheet to alert me to the fact that I am entering a duplicate date when I enter it so I can add an additional indicator to the date. This way I won't have two cans with the same title. Is there a way for Numbers to detect duplicate information as I enter it?
    -Karin

    When the table contain numerous rows, it may be useful to use a footer row so that the footer of the column containing the flag to duplicates display the index of the higher flagged row.
    In C2, the formula is :
    =IF(COUNTIF(B,B2)>1, ROW(),999999)
    Apply fill down to fill every 'standard' cells of column C.
    Apply a conditional format to this column : set ink to white if the value is 999999
    At last, in the footer cell (C14) insert the formula :
    =SMALL(C,1)
    So you will automatically know which is the existing row which we are duplicating.
    I expanded this feature to display in the footer the contents of this duplicated row so there will not be necessary to move in the table to know this contents.
    In A14, the formula is :
    =IF($C14>0,OFFSET(A$1,$C14-1,0),"")
    and apply fill to the right to get this formula in B14 :
    =IF($C14>0,OFFSET(B$1,$C14-1,0),"")
    Yvan KOENIG (VALLAURIS, France) samedi 5 mars 2011 16:01:03

  • How to create a duplicate audio track ?

    I only want to use the right channel of audio recorded with a shotgun mic and duplicate it in the left channel. Any ideas????

    I think you will need to use GarageBand to do this.
    First drag the clips to your project. Then SHARE/EXPORT USING QUICKTIME
    In dialog box, choose MOVIE TO QUICKTIME MOVIE,
    In the Export: box, choose SOUND TO AIFF. Use the default setting unless you have expertise in this area.
    The AIFF file will import to GarageBand.
    I recommend you check with the GarageBand discussion group for additional help.
    But [here is a really good FAQ for GarageBand.|http://www.bulletsandbones.com/GB/GBFAQ.html]
    Message was edited by: AppleMan1958

  • Merging clips results in several duplicate audio channels/tracks

    I am trying to sync my audio and video in Premiere, and something is screwing it up.
    I have my video track, that has 2 audio tracks.
    Then I have my polyphonic wav file, that has 5 audio tracks.
    2+5 = 7, right?
    So why is it, when I merge my two clips together, that Premiere decides to create 20 additional tracks for my Merged Clip, totaling 27 tracks?! The majority of them are blank/empty/silent. Why is it doing this?
    ORIGINAL FILES SYNCED UP
    AFTER - MERGED CLIP ON RIGHT

    jdemo177 wrote:
    . I used pluraleyes to match the audio, 5D and HVX and then imported a multi cam storyline.
    I don't understand this part of your explanation. It's been a while since I've used PE, since FCPX's sync and multicam features work so well.
    Why not try a short test – skipping the PE steps entirely. Select two of your clips and let FCP automatically create a test multiclip matching the HVX waveforms with those on the 5D. Open in the Angle Editor – or start a test project and see whether the boom mic track is present.
    Russ

  • Duplicate Contact information in IT 1002 for Curriculum

    Hi All,
    While creating a Curriculum in LSO, for the Description Infotype screen is displaying the Contact Information twice. This is happening for the Delivery TYpe - Web based Training also.
    But not for Class Room Training !!!
    Please let me know if you have come across this and resolved the same.
    Regards,
    Ram Prakash

    Dear Praveen,
    Thanks for the information. I have been looking around for the options in configtool and user adminstration with in portal, but never realised we need to go to user management from index.html
    Thanks again and points are alloted.
    Regards,
    Sreeram

  • Unwanted Duplicate Audio Track

    I've got a few video clips that keep giving me trouble in iMovie '13. When played back in iMovie, they have a second audio track that is a slow-mo version of the main audio.
    I recorded the clips at 1080p on a Nikon d3100. I converted them to 720p using Handbrake and the Apple Universal preset. That process output three .m4v files. Each .m4v file plays just fine. No audio issues at all.
    Next, I import the files into a new event in iMovie. Import process appears to go fine. However, when I play back the imported file (whether through the media library or the timeline), a second audio feed appears. This new track is a slow-mo version of the main track. It is delayed by about five seconds and plays right over the top.
    I have no idea what's going on. Any help would be appreciated!

    Thanks for the suggestions.
    I wanted to lower the resolution as the 1080p video seemed to be destroying my mid-2011 Mac mini. I thought 720p might be a mit more managable.
    I did have the same result whether dragging directly to the timeline or using the import feature.
    Ultimately, I solved the problem by "exporting" the 1080p video to 720p files through QuickTime. I must have had some odd setting enabled in HandBrake.

  • Can't update Audio Information in 7.6

    The new version won't let me edit the information, does anyone know a way around this?

    Sometimes Windows will mark files read-only, such as when they've been moved around a network or taken off a disk. Read-only files can't be edited in iTunes. To see if your file is read-only, select it in iTunes and press Ctrl-R. Right-click the file, and choose Properties. Remove any checkmark next to read-only. This technique works on a whole group of files too, so you could quickly remove the checkmark from all your songs if you need to.

  • DUPLICATE CONTACT INFORMATION, ON MY IPHONE, ICLOUD

    this is NOT about duplicate contacts but about on the iphone>contact>groups
    has redundant lists
    ALL CONTACTS
    ON MY IPHONE>ALL ON MY IPHONE + CATEGORIES
    ICLOUD>ALL ICLOUD + CATEGORIES
    i don't understand all these lists. since everything is synced via icloud
    why the whole list on 'on my iphone'? is it because the iphone list sits
    in the memory on the iphone and the icloud list is actually accessing what is in icloud
    (so for example if you lost contact with icloud there would be nothing there?).
    just don't understand the concept. and how to simplify all the scrolling by eliminating
    for example 'on the iphone'

    If you synced your phone with iTunes on your Mac, check iTunes/Settings/Devices and see if there is a recent backup of your phone listed. If yes, use it to restore from, contacts are part of the backup.
    Also check if syncing contacts is selected in the Info pane in iTunes with your phone connected.
    If it says that your contacts can be or are synced from your address book on your Mac, and your address book does have your contacts listed, your contacts will be synced again to your phone the next time you sync it.
    Just make sure to have at least one contact listed on the phone, syncing to an iPhone without contacts listed will erase the info on your computer as well.
    Contacts
    To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
    You can sync your contacts with:
    Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
    Windows Address Book (Windows XP)
    Windows Contacts (Windows Vista, Windows 7, and Windows 8)
    Address Book (Mac OS X v10.7 and earlier)
    Contacts (Mac OS X v10.8)
    Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
    Notes:
    When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
    You can select a group of contacts to which all new contacts created on your iOS device will be added.
    Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
    copied from iOS: How to transfer or sync content to your computer

  • Duplicate Audio on Export After Detach Audio

    I'm working with a very short clip, about 2 minutes. In the clip the narration starts almost immediately. to soften the transition, I detached the audio, stretched it into the fade in, and faded it in as well. In the preview window the desired result is match perfectly. Problem is, when I export, I get two audio tracks, with about a 2 sec difference (the same length as my fade, surely not coincidentally). I've insured that the audio attached to the video is now muted, but it still exports with overlapping audios.
    I'm on '11 with this weeks update already applied.
    Oh also, when importing source material from a .vob, the audio is squelches and ends about 30 seconds into any clip now too.

    Hi:
    Please read the XP downgrade guide at the link below:
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
    Your model's downgrade guidance can be found under "Difficult Models."  There is a section on what steps need to be taken to install the audio drivers. Pay particular attention to installing the correct version of the MS UAA driver before installing the audio driver.
    Paul

  • Information in the case folder is not getting updated in Oracle Credit Mgt

    Hi,
    I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
    I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
    PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
    So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.

    Sumit Malik wrote:
    Hi,
    I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
    I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
    PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
    So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.Duplicate post -- Information in the case folder is not getting updated in Oracle Credit Mgt

  • How to create a playlist *with* duplicate songs

    I have a practice where I need to play a playlist with duplicate audio tracks.  The audio tracks are not duplicated in the iTunes app and I don't want to duplicate them as audio tracks.  I only want to create a playlist that will play the same audio track at different points in the playst.  For example...
    Announcement of beginning
    Round 1
    Announcement of task1
    John Doe 1
    John Doe 2
    3 minute work window
    Countdown of 10 minutes
    Round 2
    Announcement of task2
    John Doe 3
    John Doe 4
    3 minute work window
    Countdown of 10 minutes
    Round 3
    Announcement of task1
    John Doe 5
    John Doe 6
    3 minute work window
    Countdown of 10 minutes
    Round 2
    Announcement of task2
    John Doe 7
    John Doe 8
    3 minute work window
    Countdown of 10 minutes
    As you can see... I need to be able to duplicate the playlist audio tracks at certain points in the playlist to create the event that I need for that day.
    The problem is that iTunes sees that a duplicate track is put into the playlist and doesn't allow it.  I end up with this as I can not readd an audio track that I have in the playlist already.
    Announcement of beginning
    Round 1
    Announcement of task1
    John Doe 1
    John Doe 2
    3 minute work window
    Countdown of 10 minutes
    Round 2
    Announcement of task2
    John Doe 3
    John Doe 4
    John Doe 5
    John Doe 6
    John Doe 7
    John Doe 8
    Is there no way to tell iTunes to allow duplicate audio tracks in a playlist?

    Smart playlists and playlist folders won't hold duplicate entries, but it should be possible to put the same track more than once into a regular playlist. Go to Edit > Preferences > Advanced and click the button Reset Warnings... iTunes should now warn you when you try to add duplicate items to a playlist, but you should have the option to add the items anyway.
    tt2

Maybe you are looking for