Duplicate button but not text

If someone can help, I would really appreciate it. I want to
duplicate a button 2 times to put in place of 2 current buttons
(because they are messed up) but when I change the text on the
copied button, it changes it on the original. I was trying to
figure out what I was doing wrong. Please any help as I am totally
stumped and need to finish this asap. Thanks.

I found one more text file that was called the same thing
which was t3, so after duplicating that one, I then had
b3
b3_copy
b3t
b3t_copy
t3
b3t_copy_original
I am not sure what you mean by "switching the movieclip" and
again after trying to change the text, it did the same with it
all...
Here is the situation. I bought a premade template. 2 of the
navigation buttons are messed up (they go to far to the right when
you hover the mouse over them) but the other 4 do just right. So, I
was trying to duplicate one of the other buttons in place of those
2 that were messed up. I tried first to figure out how to make it
not go so far over, but i don't know how to do it. It shows layers
etc., for each button. You can view the template I bought here at
http://www.templatehelp.com/preset/pr_preview.php?pr_code=Norsz5ET4K9E1F0qmvaj914VVq7ihg&i =12176&tab=31
Hover your mouse over the navigation and you will see what I mean.
Look at the first 2 buttons compared to the other 4...

Similar Messages

  • IMessage only can send text with photo but not text only

    How come my iMessage can only sent text with photo but not text only. While entered text the send button is blue and gray.the button could become blue and white when only photo was being inserted. My iPad 2 iOS version 5.0.1.

    Went apple store today, everything is fine. Out of the store I have the same problem as disrobed above. Can anyone help?

  • Can you choose to block phone calls but not texts from a number?

    So I have searched all over the place and have not found an answer.  I am sure someone has blocked me from calling them because when I try to call them I recieve this message: "Welcome to Verizon Wireless. The number you were trying to reach has calling restrictions which has prevented the completion of your call."However I am wondering if they can still receieve my texts.  I have sent two and they both show that they have been delivered on my phone and they both also show up on my online bill as having been sent from me and recieved to the number that I am pretty sure has blocked me.  Does Verizon allow someone to block just phone calls but not text messages?  Or if you block a number from calling does that mean texting from that same number is automatically blocked as well (or is it two seperate processes)?  I understand it may look like it has been sent on my end, but I am wondering, since I never got a "message failed" indicator or anything else telling me they never got it, if they were able to receive and read the 2 messages?  We both are Verizon customers by the way.  Thanks!!!

    That person did block you, and no they cannot receive or read your texts.

  • Graphics convert but not text even when ocr is disabled

    graphics convert but not text even when ocr is disabled

    Hmmm... I seem to have found the plist file that is doing it. I was looking at /Library/Application\ Support/Apple/Remote\ Desktop/ before... looks like /Library/Preferences/com.apple.ARDAgent.plist is the culprit.
    This plist is a binary, so I had to use plutil to convert to xml in order to make it human readable. I wonder if I can just hack this file up a bit and re-deploy it to each machine. Or I wonder if it would re-build if I simply remove it from each client. I will need to test to find out, seeing as though the task servers are listed in it, probably not a good idea to remove it all the way.

  • HT201412 my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me

    my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me

    hold the power button and home button for about a minute
    plug it into a computer with itunes on
    either way should work

  • My macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

    my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

    It not polite to repost asking fro more help three minutes after initial post.
    Recovery mode is Command & R keys after depressing and releasing the Power button  for a normal startup.
    OS X: About OS X Recovery - Apple Support
    That only works for Lion and later.
    What exactly happens when your try to boot to Recovery?
    Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
    OS X: What is Safe Boot, Safe Mode?
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    What model MacBook Pro and what OSX version was on the Mac?
    Have you tried booting from an OSX install DVD?
    When you try to start doe the Power light light?
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • When selecting the camera on 3gs the screen just goes black i can still take a photo using the top volume button but not with the screen please help

    hello there
    when selecting the camera on my 3gs the screen goes black and has no responce i can take a picture with the top volume button but cannot see it until i open photos
    please can anyone help
    thankyou andy

    Try closing the Camera app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset (unless this is what you mean by powering off and restarting) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I phone screen is blank, have tried holding both buttons but not working

    I phone screen is blank, have tried holding both buttons to reset but still will not work any suggestions?

    Hey damien1979,
    Thanks for the question. I understand that you are experiencing issues with your iPhone 4. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    4. After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    6. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    7. If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • Analyzer 5 - How to select children in radio button but not parent?

    In Analyzer 5.03, I would like to have a radio button selection box of the children of a parent. Since the option to select a subset is not available for selection controls, I am using "Also select children" which displays the parent upon page load, but then removes it when I refresh the page.What is this strange behavior all about and how can I just select the children?Any help is greatly appreciated. Thank you.-Scott

    radio.setLayout("pageDirection");Also see:
    HtmlSelectOneRadio API doc: http://java.sun.com/javaee/5/docs/api/javax/faces/component/html/HtmlSelectOneRadio.html
    h:selectOneRadio TLD doc: http://java.sun.com/javaee/javaserverfaces/1.2/docs/tlddocs/h/selectOneRadio.html

  • V.22 upgrade made all graphics bigger, but not text

    All the graphics portions of Firefox got bigger, so that the page no longer fits the screen. The text has not changed perceptibly. Except for the Mozilla Support pages, all the view controls seem to work as usual. Text only zoom works properly, except right here.
    After trying it, the fix to change all the default text sizes is just the opposite of what I need.
    I notice distortions/garbling on some screens when I slide over to the right, rather than just viewing what should be there. i.e. my bank statement. Non-trivial!
    Latest Flash doesn't seem just right, either. Slow, obvious.
    Is this another case of the world advancing beyond my old OS?

    you could try this if you want to keep your system's dpi on a higher level but if the text size in firefox should still be lower as it was handled before the update:
    enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''. double-click it and change its value to '''1.0''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.1 equals 110% and so on; -1.0 is the default value and will adhere to the system settings).

  • Deleting Text Box, but not text, in Pages '09

    I use Readiris to scan documents, which then open in Word. All text is placed in text boxes (sometimes line by line). When I import the Word docs into Pages, I have literally hundreds of text boxes, when really all I want is to work with the text. Is there a way to delete the text boxes without deleting the text in them?

    --
    --[SCRIPT extractRawTextFromPages]
    Open a Pages document
    run the script.
    You will get on the Desktop a text file entitled
    "extractedRawText.txt"
    containing the document's raw text.
    Yvan KOENIG (Vallauris, FRANCE)
    2009/07/03 for AW Draw documents
    2009/08/07 Adapted for Pages
    on run
    tell application "Pages"
    activate
    tell document 1
    set rawText to ""
    try
    set rawText to "Main Layer" & return & body text & return
    end try
    set textBoxes to get text boxes
    if textBoxes is not {} then
    repeat with i from 1 to count of textBoxes
    set rawText to rawText & "text block #" & i & return & (get object text of item i of textBoxes) & return & return
    end repeat
    end if
    end tell -- document
    end tell -- Appleworks
    if rawText is not "" then
    set nomDuRapport to "extractedRawText.txt"
    set p2d to path to desktop
    set p2r to (p2d as text) & nomDuRapport
    tell application "System Events"
    if exists (file p2r) then delete (file p2r)
    make new file at end of p2d with properties {name:nomDuRapport}
    end tell -- System Events
    write (rawText as text) to (p2r as alias)
    end if
    end run
    --[/SCRIPT]
    Yvan KOENIG (Vallauris, FRANCE vendredi 7 août 2009 21:45:45)

  • Spry Image Slideshow - Only see play button but not slideshow

    Hi,
    I am having trouble getting Spry Image Slideshow to work on my test site. Can somebody help me?
    Problem:     I only see the "play" button spinning after it went live but cannot get the slideshow to appear.
    Details:    
         Dreamweaver CS5.5
         Widget :     Spry image Slideshow Basic 1.0  - (widget wid = "2141542")
         Mac OS 10.6.3
         Mozilla Firefox 8.0.1
                   1.  Inserted Spry Image Slideshow 1.0 widget into my page "ACS_shipping.html"
                   2.  Replaced sample pictures and thumbnail pictures with some of my test pictures.
                   3.  A list of thumbnails appears on my design page.
                   3.  Click on "Live View" button; only see the frame and the black background with the "play" button spinning on the screen.
                   4. Uploaded files on server and found same result.
        Webpage Link:            locicompany.ca/ACS/ACS_shipping.html    
    Loci

    I don't know what to say....I tried all night it didn't work. As soon as I posted my question on the forum the slideshow starts running....wow....I'm speechless. Thanks all who's looked at my post.
    Loci

  • Prints graphics, but not text. Firefox 3.5.10

    I can only print graphics - can not print text part of page or email from Firefox. Prints OK from Wordperfect, wordpad, notepad and a print screen from XP. Canon Pixma MP780, XP SP2 As far as I can tell all settings are correct for the printer in the control panel.
    == This happened ==
    Every time Firefox opened
    == just started

    Hi,
    Try printing a Supply Status report, can you see any of the colors printed correctly? (Black, Magenta, Cyan and Yellow) or there may some missing colors?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02017194&cc=us&dlc=en&lc=en&product=3422472&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Allow doClick() on buttons, but not from mouse

    Hi all,
    I have an odd situation:
    I have a drawing tool with a bunch of JButtons. When users click a button, the button is selected, any currently selected button gets deselected (using the button's doClick() method). Also, certain events in my program use the button's doClick() method.
    However, what I DON'T want is for users to UNCLICK a button by themselves. So if a user clicks an already selected button, I want nothing at all to happen.
    I'm not sure how I could do this, however, as I don't even know where I'd catch the clicking event (since JButton handles that itself). I don't want to set the button to be disabled, because other events in the program ought to be able to access the JButton.
    Any ideas would be greatly appreciated,
    Thanks!

    I suppose you could call it an algorithm. If
    clicked button != selected buttonMy problem is that I can't see any way to differentiate between the clicked button and the selected button. When the user clicks a button, it's the JButton's event handler that deals with the selection (or something like that), and so the button gets selected before I can do anything.
    For instance, if I add a little error in one of my button listeners, so I can get a stack trace from the clicked event, I get this stack trace:
    Exception in thread "AWT-EventQueue-0" java.lang.ArithmeticException: / by zero
         at org.concord.graph.examples.GraphWindowToolBar$1.actionPerformed(GraphWindowToolBar.java:246)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:269)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
         at java.awt.Component.processMouseEvent(Component.java:5554)... and so on up to the EventDispachThread. I don't understand at what point I could put in code such as "If clicked button != selected then select button, otherwise don't" because it seems as if the button is already selected before I get a chance to do that.

  • Mandatory is checked when exiting radio groups, but not text fields?

    I have a form with many questions, and most all of them are required.   When tabbing out or otherwise exiting a radio group, the user gets warned if they did not select an item.  When tabbing out of a text field, nothing happens.  The user does get warned about the empty text fields if they try to submit the form.

    The following is a very basic/general script used to check/test if a field's value is null after the user exits out of the field. Note that it will not prevent the user from submitting the form, however, it seems you are covering that "validation" via other means (i.e. field property).
    if (this.rawValue == null){
    xfa.host.messageBox("Please enter a value in this field. It can't be left empty", "REQUIRED", 0, 0);
    else{

Maybe you are looking for