Duplicate cache created in CS4

A desktop PC and a Laptop are each generating its own cache in a central folder even though the same folder is specified.
If I delete the cache from either PC/Laptop files created by both systems are deleted.
Configuration:
Adobe Bridge CS4
Running XP Pro with SP2 on both systems.
The central folder I am using is on a USB hard drive which is connected to the PC.
What am I missing?

You can use one cache file for two computers, but only if both computers are networked, not operating individually.
Here is a link to a thread that shows it can be done. Unfortunately the answer I gave in post #1 was a link that is an old webx address from the previous system, and so it is "dead" (not readable). If you use a web search engine, rather than Adobe, perhaps you can find the link I refered to. Or maybe the thread will give you some clues on what you need to do.
http://forums.adobe.com/click.jspa?searchID=602338&objectType=2&objectID=1203182

Similar Messages

Duplicate Messages created on target with Multimapping(No BPM)

Hi
I am working on PI7.1 .
My sceniro
IDOC to JMS using message split
Receiving IDOC with Header and Items, PI splitting IDOC and sending to Multiple JMS queues, Header segment data to header queue, Item segment data to Item queue
PI Successfully Posting data to Queues, but duplicate messages creating on target sys(One IDOC with one header and one item date, PI sending 2 header messages , two item messages to target sys) .
I did following steps
ESR
1. Created two target messages
2. Created Two target inbound interfaces
3. Created Message mapping using with multiple target messages, changed signature occurrence to 0 : unbounded , and mapped to source node to target nodes
4. Created operation mapping with one source to two target interfaces
EB
1. Created one business components and assigned one sender and two receiver service interfaces
2. Created Two receiver communication channel
3. Created One receiver determination
4. Created One interface determination , added two inbound interfaces with one operation mapping (Multiplicity is blank )
5. Created two receiver agreement
Please help .

Thanks Gouri ,
My IDOC structure (Source Message Type)
HEADER_SEG Node (0:9999) -
> MT_HEADER ( 0:unbounded) (this one of target message type)
                                                                HEADER_FLDS (Element - Main hierarchy)
         FLDS----
> FLDS
ITEM_SEG Node (0:9999) -
>MT_ITEM(0:unbounded ) (this is another message type)
                                                                ITEM_FLDS (Element - Main hierarchy)
         FLDS----
> FLDS
I tried with the below mappings
                HEADER_SEG Node -
>MT_HEADER
                HEADER_SEG Node -
> HEADER_FLDS (element )
                ITEM_SEG Node -
>MT_HEADER
                ITEM_SEG Node -
> ITEM_FLDS (element )
2. method
                HEADER_SEG Node -
>MT_HEADER
                                                       HEADER_FLDS (element )(not mapped)
                ITEM_SEG Node -
>MT_HEADER
                ITEM_SEG Node   ITEM_FLDS (element )(not mapped)

Can I Open an ind. created in CS4 in ID5

Will I be able to open an ind.
created in CS4 by my graphic formatter
in ID5?
Judy

Adobe really did a number (no pun intended) when their marketing department came up with the Creative Suite numbering scheme. It has confused a lot of folks with all of the old Macromedia and Adobe applications when they started this. And to make things worse, some apps actually skipped version numbers so they could remain somewhat consistent with the suite number!
As a general rule, I always tell people not to use the splash screen to confirm version numbers, but rather the Help > About screen. This will of course show the exact version number including any updates that have been applied:
Wikipedia has a good historical listing of the version numbers:
http://en.wikipedia.org/wiki/Adobe_InDesign
InDesign 1.0 (codenamed K2): August 31, 1999.
InDesign 1.5 (codenamed Sherpa): April 2001.
InDesign 2.0 (codenamed Annapurna): January 2002 (just days before QuarkXPress 5). First version to support Mac OS X and native transparencies & drop shadows.
InDesign CS (codenamed Dragontail) and InDesign CS PageMaker Edition (3.0): October 2003.
InDesign CS2 (4.0) (codenamed Firedrake): shipped in May 2005.
InDesign Server (codenamed Bishop): released October 2005
InDesign CS3 (5.0) (codenamed Cobalt): April 2007.
InDesign CS3 Server (codenamed Xenon): released May 2007
InDesign CS4 (6.0) (codenamed Basil): Introduced September 23, shipped in October 2008.
InDesign CS4 Server (codenamed Thyme)
InDesign CS5 (7.0) released April 2010

Duplicate member created

Hello,
I get the following error message when I execute my query with the query designer. Curious is, when I execute the query and don´t choose a value of the variable "debitor" I get a list of all debitors and other characteristics, keyfigures but when I choose one debitor of the variable who was also in the list before I get the error message. ZCUSTFI1 is the name of the InfoObject, where I get my master data.
Have somebody an answer herone?
The error:
Die erste Ausnahme, die dazu geführt hat, dass der Request fehlgeschlagen ist, war:
Ungültiger Programmzustand: Duplicate member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343
com.sap.ip.bi.bics.exceptions.BicsProgrammErrorException: Invalid program status: Duplicate member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:310)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:594)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:535)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.getMembers(ProviderInfoObject.java:964)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.getMembers(ProviderInfoObject.java:912)
Thanks.
Michael

English :
The first exception, which led to it that the Request failed, was: Invalid program mode: Duplicate more member created: ZCUSTFI1: 070210021002100000100175, Sids: 3863513 & 3715343

Duplicate columns created in attribute view

Hi
I created an attribute view as shown in the video Creating an attribute view | SAP HANA using the data given. After creating the attribute view as per the video, when I preview the data in the attribute view, I see that all the columns are created twice. For instance there is Company Name and Company Name 1, Contact_Name and Contact_Name1, ContactTitle and ContactTitle1 and so on. This has happened for all the fields.
I checked the table in the schema to see if there are duplicate fields there. But the DIMSupplier table in the STS schema has no duplicate fields.
What I want to know is how were these duplicate fields created in this attribute view and how do I remove them? I checked the output fields and there also there are no duplicate fields.
When I right click on the attribute view and select data preview, and then under the tab "Distinct Values" I can see all these duplicate field names. I am trying to delete these duplicate field names but I am getting an error message that the field you are trying to delete is being used elsewhere hence it cannot be delete.
Can anyone please advise how to fix this error.
Thank you.
Regards,
Pavan.

Hi Anjali,
Thanks a lot for your reply. But in my data foundation STS_ATTRIBUTE_VIEW, I do not see any duplicate columns to remove them. Today I see a warning and also I am unable to right click on the attribute view.
The warning is given below:
Message :
STS.STS_ATTRIBUTE_VIEW: one or more columns of Table: DIMSUPPLIER have invalid ABAP name
But in the Data Foundation in the Output tab under Columns I do not have any duplicate columns listed.
Also the attribute view is in grey color. Its not in green color even after clicking on Save and Validate and SAve and Activate.
I select the attribute view and hit on the data preview button. There in the Analysis tab under Available objects under String folder I can see all these duplicate column names. I right click on the duplicate column names and I see the options "Distinct Values", "Add to labels", values, filters and "Properties". Having selected the column name I hit on the delete button on my keyboard but nothing happened.
Is this because of the warning that I am getting. What does this warning mean?
Please advise.
Thank you.
Regards,
Pavan.

Firefox with Profile-sync-daemon creates duplicate cache directory

I've set up the Profile-sync-daemon https://wiki.archlinux.org/index.php/Pr … ync-daemon (mainly to ease on my old SSD) and it works fine but Firefox keeps creating entries in
/home/<username>/.cache/mozilla/firefox/<myprofilename>
It contains 3 directories
/safebrowsing
/startupCache
/thumbnails
Since I set up psd I've been using
browser.cache.disk.parent_directory : /home/<myusername>/.mozilla/firefox/<myprofilename>
What can I do to address this issue? What I tried:
1. browser.cache.use_new_backend 0 (restore to default)
Last edited by bbarcher (2014-04-05 18:51:05)

gedgon wrote:
1. use your user account
2.
$mkdir ~/.mozilla/firefox/<profilename>/0CachesSymlinked
Same result as in post #7.
Apparently I suck at symlinking. I wouldn't want to waste anybody's time. I'll revisit the topic once I learn the basics of symlinking. I'll use ASD in the meantime.
EDIT:
OK, I got it now. The problem was that at the time I issued
ln -s /home/<username>/.mozilla/firefox/<profilename>/0CachesSymlinked /home/<username>/.cache/mozilla/firefox/<profilename>
the
/home/<username>/.cache/mozilla/firefox/<profilename>
already existed (I left it out, don't ask)
Since I'm a symlinking savvy I'm going to symlink my ~/Downloads to my external drive
graysky wrote:@OP - Yes, since v21 of firefox, it uses ~/.cache for the caching just like chromium. The simple solution is to mount ~/.cache as tmpfs in your fstab. I documented this is psd's man page. Here is a link describing how to do it.
I'd rather preserve contents of ~/.cache between reboots. Especially because it holds nautilus thumbnails. I'd rather keep my Firefox cache as well.
Last edited by bbarcher (2014-04-06 18:09:52)

Opening InDesign files in CS5 created in CS4 I get this message.

I have a few files that I'm unable to open, CS4 or CS5, I created them in CS4 when trying to open I get this message "Can not open such and such file Adobe InDesign may not support the file format, a plug-in that supports the file may be missing, or the file maybe open in another application.
I'm unable to open in either version. hoping some one has a way of getting them open, I have back ups but they give me the same message.
Thank you in advance
Mark

The files are stored on the P drive, the Adobe drive that was created while using VC in CS4, plus I weekly back that drive up, those files are the same way. Although I'm not able to use the VC like before I have continued to store files there.
But yes I have copied to the desktop, tried the the open comand in the file menue and still get the same message.
Since these files have a rose I am migrating the files to my mine hard drive just in case that maybe the reason. Do you have any other suggestions.
Thanks for the reply.
Mark

Press Quality PDFs created in CS4 show as "damaged" when attempting to open in Acrobat 5

I've been having problems creating PDFs that can be opened in Acrobat 5. While using InDesign CS4, I'm trying to print to the Adobe PDF driver using the Press Quality setting, which as it states "can be opened with Acrobat and Adobe Reader 5.0 and later." However, when someone tries to open the resulting PDFs in Acrobat 5, they get a message saying "There was an error opening this document. The file is damaged and could not be repaired." They open just fine in Acrobat 9.
I have been able to export to a PDF and get it to open successfully in Acrobat 5, but unfortunately this is not an option with one file I'm working on (I need to print color separations as a PDF and then pull it into PitStop Pro to make adjustments). Does anybody have any ideas as to why Acrobat 5 isn't able to read these PDFs?
Running Windows Vista Business with SP1 on a Lenovo with an Intel Core2 Duo processor and 3GB of RAM.
Thanks.

If you print to the Adobe PDF printer you are creating a PS file that is then automatically loaded into Distiller for conversion to PDF. Printing to a different PS file should not make a difference, unless the PS driver is substantially different. You can also print to file with the Aodbe PDF printer and then convert with Distiller (eliminating the automatic Distiller step). If you are printing to a network location, that may be the issue. Acrobat has long had problems with some network connections. To check this out, you might print locally and then move the file to the network drive.
In terms of posting a file, you have to put it on a separate server and then post the link.

Does anyone have a script to duplicate multiple pages in CS4?

I know it can be done, but I'm not a programmer. What would be the script to duplicate a user defined number of pages after a user defined page in a mulit-page InDesign document? We have documents with up to 159 pages, but need to have pages within the documents duplicated right after a selected page, not to the end of the document.
This is all I have of a script for this and I don't know how to make it work or make it user-interactive for page number input:
--Duplicating more than one page at a time in InDesign CS4
tell application "Adobe InDesign CS4"
    set mySourcePageNumber to UserInput1
    set numberOfPages to UserInput2
    tell application "InDesign 6.0.3"
        tell active document
            repeat numberOfPages times
                set myNewPage to duplicate page mySourcePageNumber
            end repeat
        end tell
    end tell
end tell

This is a very basic script, just written for you on CS3 and totally untested:
if (app.documents.length == 0){
    alert ("Please open a document, select an object, and try again.");
    exit();
var myDoc = app.activeDocument;
var myPage = myDoc.layoutWindows[0].activePage;
var myPageId = myPage.id;
var myDialog = app.dialogs.add({name:"Duplicate pages"});
with(myDialog.dialogColumns.add()){
    with(borderPanels.add()){
        staticTexts.add({staticLabel:"Duplicate front-most page # " + myPage.name});
        var myIntBox = integerEditboxes.add({editValue:1, smallNudge:1, largeNudge:10});
        staticTexts.add({staticLabel:" times"});
var myResult = myDialog.show();
if(myResult == true){
    var myNumber = myIntBox.editValue;
    if (myNumber < 1) {
        alert(myNumber + " is invalid number.");
        exit();
    for (i = 0; i < myNumber; i++) {
        myPage.duplicate(LocationOptions.AFTER, myDoc.pages.itemByID(myPageId));
myDialog.destroy();
It duplicates the active (the front-most page) — its number you see in the bottom left corner of the document window. You can type a number or use up/down arrows to increment it by 1 (add shift key to increment it by 10).
Hope it helps.
Kasyan

Droplet not creating folder cs4 photoshop windows 7

so i created a script that creats folder and subfolders inside ( folder1\subfolder1\subfolder2 etc" and i run the script in photoshot cs4 11.0 it creats the foldets no prob. yet when i creat a droplet it wont work. the folders dont get made... i have admin rights and am logged in as admin all the time. when the droplet is run it will either launch photoshop or bring the running photoshop to the front, the taskbar icon flashes and after a min or 2 i get the error, " droplet couldnt communicate with photoshop"
can anyone help me out on rhis please?
thank you and have a great day.
hb.

no, i didnt. i didnt want to make posts all over
. i have seen other do that and get yelled at and whatnot. i thought this wou
ld have been the best spot but i might be wrong. should i
close this out and repost there? and ty for taking the time to read and reply.

Where are user-created Flash CS4 templates stored --- On Mac?

The same question was asked and answered for Windows. But on Mac, I went to the comparable folder en/Configuration/Templates/, and I found the pre-existing templates in the Advertising folder, but still not the ones I created. Help!

I have had a hard time finding information on this as well. So despite how long ago the question was posted I am going to share the answer here to help others find this more easily. This was true for CS6, (I do not have CS4 to test) but would assume it is in a similar location.
For Mac:
Open finder window > click "Go" at the top of the screen
Hold down Option and click Library
Application Support > Adobe > Flash CS6 > en_US (your preferred language) > Configuration > Templates
You should then see only the folders that you have created your own templates under.

Help, logo created in CS4 copying weird in CS6!! really stuck, Please help!

I apologize for re posting this, but im trying to get some new help for my problem. I have created a logo in CS4 years ago, i need to work on it in CS6.
You can see the problem here:
http://www.bellwoodbnb.ca/1.html
When i open:
http://www.bellwoodbnb.ca/1.ai
It opens correctly in CS6,
when i copy and paste it into a new CS6 Ai file, it pastes as a faded version as seen here:
http://www.bellwoodbnb.ca/2.ai
We have checked to make sure all of the settings i can find are identical, we have replaces the CS6 pantones with legacy pantones and it did nothing. We know it opens, copy and pastes correctly in CS4 & CS5. But when copy/pasting or placing in CS6 it fades out for some reason.
Any help would be appreciated.
Thank you in advance!

There's a redirect on the site which removed the "1.ai" portion. But you can put it back in and get the download. I posted too quickly.
The reason things are different....
Pantone color builds
When you open the previous file you open the file with their existing Pantone CMYK color builds. When you paste the file, you paste and get the new Pantone LAB builds in CS6.
Illustrator CS6 Pantone+ libraries do not contain CMYK color builds. The LAB builds are not as vibrant as the CMYK builds. Pantone states this is to "better represent colors on screen". Although I'm not a fan of this.
You can read more about it here:
http://helpx.adobe.com/illustrator/kb/pantone-plus.html
If working for print, the differnce in screen representation is not really something which is supposed to matter. After all Pantone 297U is Pantone 297U on press. I find the visual differnce pretty disconcerting and always revert to previous Pantone color books.
Viewing the other thread... I don't know what more you expect to learn. Monika gave you sound advice there.

Duplicate IDOC created for basic type PEXR2002

Hi,
We are using PEXR2002 idoc for some document postings in FI. For a segment EIEDP02, when trying to write a BELNR field value which exceeds its size of CHAR 35. Its creating a duplicate segment with same key value. Because of this, the idoc not getting created and ends up in error.
Could you please anyone help me in this regard?
Thanks and Regards,
Vimala P

Hi,
In our process, the EIEDP02-BELNR value is actually filled with document text field value which is of length more than 35. What is happening right now is, if the length of document text having more than 35 characters and then with first 35 character of BELNR value one segment is created. And it again create one more segment EIEDP02 with BELNR value having the rest of the fields value(>35 characters). Thus creates duplicate segments which results in IDOC creation failure
Thanks and Regards,
Vimala P

Duplicate columns created in Document Libraries

Hi,
We are having issues with duplicate columns being created in document libraries after copying/moving documents between libraries (SharePoint 2013):
Unable to find any users with similar issues on forum
Thanks in advance
K

Duplication has been sort of a thing for us as well. On our SP public site images will start duplicating themselves. I am not sure if it's because of different libraries running in the background, but it is very annoying.
I'm not sure if these two cases are connected, but I thought I'd post so you knew you weren't alone in this strange behavior.

What's causing my titles created in CS4 not to show in th exported video done by encore?

It appears that the titles that I've created and can see in Premiere CS4 aren't being exported to encore with the rest of to video. What's causing this to happen?

the project was orignally created on another computer; would the arwork for the titles be stored on the original computer?
I've had situations where graphics embedded into a title didn't show up because the graphics were not where Premiere thought they should be, either because they moved or because they existed on another computer. But in those situations, the graphics did NOT show up in Premiere, and I knew to fix the problem before export.
Still, it's worth exploring the option of deleting those graphics from the title and redoing them once you have them on your hard drive.

Duplicate cache created in CS4

Similar Messages

Maybe you are looking for