Duplicate calendars in Outlook 2010 after migration from Outlook 2003 using USMT 4.1
Hi
We have setup where we migrate computers from Windows XP and Outlook 2003 to Windows 7 and Outlook 2010 using USMT 4.1 and task sequence and SCCM.
We are currently experiencing that some users are having calendars in Outlook 2010 duplicated after the migration has been performed. The duplicated calendar cannot be deleted. The name of the calendar varies from case to case.
Has anyone experienced the same issues, and know how to resolve it?
Best regards,
M
Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
If the calendar from personal folder .PST file follow these methods troubleshoot
1.
Turn on or off Cached Exchange Mode, Click
Here
2.
Disable .PST file, and the re-add again.
3.
Create a new profile
4.
If the problem still did not resolve, you can refer to this KB article:
“Outlook: Troubleshooting guide for missing, duplicated or unsynchronized calendar items”
http://support.microsoft.com/kb/2222377
If the calendar from Exchange Server, you can logon mailbox via OWA, if there has duplicated calendar, the problem might be caused by Exchange Server.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best regards
William Zhou
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Similar Messages
-
Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command
Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
SPAM rules on Inbox after migration from Exchange 2003 - GFI Mail Essentials
Hello,
Few times ago, we had an Exchange 2003 server with mailboxes which were configured with "rulemgmt.exe" tool (from Microsoft ?) to manage users mailboxes and SPAM redirection in these mailboxes.
GFI MailEssentials (antispam) was installed on a mail relay and once a SPAM was detected, it was redirected in Inbox/SPAM folder on user mailbox thanks to the rule defined by "rulemgmt.exe".
Recently, we did a migration from Exchange 2003 to 2010. Unfortunately, "rulemgmt.exe" doesn't work anymore on Exchange 2010 and it's replaced by a "Transport Rule" which works fine but only to redirect SPAMs in Junk e-mail folder. However,
if I don't set up this transport rule, SPAM redirection still works from mailboxes which were created on Exchange 2003 and e-mails go to Inbox/SPAM as before... For new mailboxes on Exchange 2010, it doesn't work which is normal.
My question is: for old mailboxes from Exchange 2003, where are the SPAM redirection (Inbox/SPAM) information stored? I don't understand how SPAM can be redirected if the information is not stored in Exchange...
The aim is to use Junk E-mail folder with the Transport Rule at the end everywhere and to clean old rules used for Inbox/SPAM.
I contact GFI support but they couldn't help me.
Any idea?
Regards,
DeltaSM
Those old mailboxes probably have old rules still set. You can use the Outlook.exe /cleanrules switch to purge those old rules. This would require that you create an outlook profile for each of those impacted mailboxes.
You can also look at using MFCMapi -
http://support.microsoft.com/kb/2860406/en-us
When that is done, you might want to perform a Clean-MailboxDatabase and then look at the mailbox rules (get-inboxrule). If that does not work for you, could be something else within the mailbox and as such, I would recommend working with MS to get
more info.
DaDougInc -
We are in the process of trying to decommission our Exchange 2003 server, all of the replicas have been moved to the Exchange 2010 SP3 servers. However, each time we dismount the public folder store on the 2003 server (just to see what won't work) nobody
from outside the company can send mail to the mail-enabled public folders (we use these to communicate with vendors and customers).....they sit in the 2003 mail queue until I remount the store.
I have mail disabled them on the 2010 PF server, waited a few hours and then mail enabled them again. Same issue. Interesting to note is that when the PF store on the 2003 server is dismounted people inside
the company can still send to the mail-enabled PFs (which is good). I am stumped.
HDLHi,
There is similar issue in the below post.
https://social.technet.microsoft.com/Forums/exchange/en-US/20dc0f53-41c2-4275-a391-fd9b0907a7e1/after-move-all-replicas-to-exchange-2010-mail-enable-public-folder-stops-receiving-external-emails?forum=exchangesvrdeploylegacy -
Users not able to save draft emails from iPhone to outlook. We are using Exchagne 2007. Does anyone know if this feature will work if you are running Exchange 2010?
Thanks!Is this a developer question? If not, you might post in the iphone forum.
-
After migration from SP2010 to SP2013 event receiver code is not working
we have two lists work order list and estimation list. we developed infopath form for work order list , in that we have work order field we don't enter the value of that field after filling the all fields when i clicked save button work order ID field
will generate automatically and estimation hyper link will generate.when i click on estimation link estimation list will open, inthat list we have work order id filed it has to generate automatically(It will fetch the data from work order list). For generating
automatically we written event receiver code in visual studio 2010.After migration from SP2010 to SP2013 it is not working. May i know what modification we have to dotry these links:
http://sharepoint.stackexchange.com/questions/75491/sharepoint-2013-event-receiver-on-custom-list-definition-not-firing
http://www.sharepointdiary.com/2011/08/fix-missing-event-receivers-issue-in-migration.html
http://stackoverflow.com/questions/28298707/we-have-event-receiver-code-issue-after-migration-from-2010-to-2013
https://www.linkedin.com/groups/SharePoint-migration-designer-workflow-runs-3664766.S.5905212303858479106
http://channel9.msdn.com/Series/Reimagine-SharePoint-Development/Migrating-a-SharePoint-Event-Receiver-to-a-Remote-Event-Receiver
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing -
I have uncovered a situation where it seems the free/busy permissions are being ignored for users that were migrated from Exchange 2003 to Exchange 2010.
I have the default permissions set to only show Free/Busy Time, not Details. However if I look at the calendar for a users who was migrated from the old Exchange 2003 server, I can see details. If I look
at a newer user who was added directly to the Exchange 2010 server, I (correctly) only see the times and "Free" or "Busy", not the specific details.
I verified the permissions on the migrated mailboxes many different ways (Exfolders, cmdlets, etc) and all signs point to only allow showing Free/Busy Times, but alas, I can still see the Details as well.
My users are using Outlook 2010.Hi,
Does this issue occur on Outlook only or both Outlook and OWA?
Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.
If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.
-
Exchange server name not changing in mail profile after migration from 2010 to 2013
Following a migration from 2010 to 2013 we are finding that for a number of users the old exchange server address stays in the mail profile (control panel -> mail -> e-mail accounts) which causes Outlook not to load.
We are able to go into control panel -> mail -> e-mail accounts and change this manually to the new exchange 2013 server address but we have quite a number of users and don't really want to do it manually.
Shouldn't it be updating automatically and if so why is it?Hi,
Yes, it should be changed by autodiscover. Does this issue occur to all the migrated users?
I have seen this kind of issues before when migrating from Exchange 2003/2007 to Exchange 2010. The most efficient way is to rebuild the Outlook profile.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed
Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambarHi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Migration from Outlook Express loses everything after "group"
Hello,
I migrated from Outlook Express to Thunderbird on XP, then moved the files to Windows 8.
I had one "group" in my OE address book. Nothing after that group name (which began with an H) was migrated into the new address book. In other words, I lost everything after H.
I also have these contacts on Gmail. Is there an easy way to retrieve them from OE (I guess I could delete the group and start over, but that's a long process and I fear losing the mail I've already sent on TB), or is there an easy way to get them from gmail?
Thanks.
Sthere are several solutions to your problem, which is best for you I do not pretend to know.
There is the option of simply copying the WAB file from outlook express to Windows 7 asnd double clicking on it to have it imported to the windows contacts folder. I have instructions here http://thunderbirdtweaks.blogspot.com.au/2013/12/windows-contacts.html that include the windows contact folder into Thunderbird.
Alternatively you can install one of the gmail contact sync add-ons. I use https://addons.mozilla.org/en-US/thunderbird/addon/google-contacts -
Can only access emails through OWA after migration from exchange 2007 to 2013
can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Calendar or PIM Sofltware Suggestions Migrating from Lotus Organizer Palm Centro Unblocked
Any suggestions for Calendar and PIM software for migrating from Lotus Organizer?
Lotus Organizer 6.1 does not support Palm Centro. Palm Desktop is a shell of a program instead. I need a real PIM that I can use.
And no Outlook isn't much better. I've now experimented with both Palm Desktop and Outlook.
Key is that they must work with Centro.
Paul
Vista, Palm Centro Unblocked
Post relates to: Centro (AT&T)The only app that I know of is called Intellisync (which is now owned by Nokia I think. There's been a lot of company buyouts). This software will let you sync your Palm to just about anything (Outlook, Louts Notes, Novell GroupWise, etc).
Head on over to their website at: http://www.sync.com/
Although, I'd hurry. Looks like they're going to stop selling it in a couple weeks.
Post relates to: None -
Testing of SAP BW system after migration from OS Unix to windows
Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
NeerajHi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation PHASE 1
Review New Functionality Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade Install GUI's for Upgrade Test persons
"Check Prerequisites -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems APO
ECC6.0"
Check Compatibility Reqs with 3rd party software ?
"Test Team 2004s Delta Training To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint PHASE 2
Check/CleanUp Development Objects Check all open and not-released developments for release prior to upgrade
Prepare System Setup Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data) BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM -
When I installed Office 2010, it migrated my Outlook 2003
When I installed Office 2010, it migrated my Outlook 2003 setup successfully and the Backup add-in appears on the Add-Ins tab. It is also shows up as being active in the Manage Add-Ins page. The add-in is set up to run every day, but when I
close Outlook 2010, it does not run. If I trigger the add-in from within Outlook, the normal dialogue box comes up, and lets me select "Save Backup". But it still does not run.
I have tried disabling the add-in, removing it, and then re-installing it. But it makes no difference. Does it depend on any other add-in? Has anyone else managed to get it to work?Please visit http://www.outlookbackup.recoverytoolbox.com/ for
the solution for Personal Folder Backup problem for Outlook 2010 (32-bit) - Outlook Backup Toolbox. I found a very simple solution to it and it is working perfectly well in my computer
without any bugs. Good luck to all.
I have the add-in installed on a number of laptops for staff with a reminder every 7 days and rely on it to backup their pst files. I found this info, but it didnt work for the couple I have tested so far.
Maybe you are looking for
-
Well, that's it really. I need to send an e-mail from an account for apple mail to retrive new incoming mail. This has started happening since I upgraded to Mavericks. It's very temperamental. Some days it needs massaging to get my mail (as per above
-
i cant update my iphone via itune. ERROR message 1015. have updated and done all the trouble shooting, still didn't work out. I tried, reinstalling everything, nothing happens, this is suck! can't use my iphone!
-
CFFTP character encoding / character set
I have a strange problem with downloaded text file using cfftp at my client site. When I test on my development site, the downloaded text file is readable. But in the production server at my client in austria, the downloaded text file is not readable
-
ADF Faces: Dvt map: How to call taskflow step after to execute javascript
Hi. I have a page fragment jsff with a dvt:map. I wrote a javascript function that catch zoom and x and y coordinates of click in the map and I need to use these parameter to call a task flow step that call a java method. How to do that ? I put setPr
-
Itunes crash PLZZZZ HELP!
i just downloaded the new update for itunes, it was the quicktime thing and the mobile me thing and now when i try and open itunes it trys to instal the updates but when it gets to about 75 percent, it just stops working and gives me this error messa