Duplicate current page format

Aloha all,
I'll try to be clear in my description but I'm pretty confused by now. I'm compiling a 115 year list of officers for a certain society and after much work, I've formatted a page with a header and six text boxes spaced precisely within the page as I'd like it. How can I duplicate that page again and again so that I can simply fill in the text within the boxes instead of having to realign the boxes again and again for each page. The "duplicate" button does not work as that seems to just duplicate a box instead of the whole page format. Any ideas?
Ron

Searching for a different thing, I met this page which may also be helpful
Yvan KOENIG (from FRANCE lundi 23 juin 2008 21:42:44)

Similar Messages

How to make one firefox window`s actions duplicate on all opened firefox windows. duplicating tabs only opens the original source of page, not current page view

I want to know is there a way to open, say 3, Firefox windows and duplicate the actions done on one to happen across all open Firefox windows. I want to use the repeat feature, left click followed by ENTER the whole time on a current thing I'm working on. The tabs won't work because I have to flip through them the whole time. I'm currently doing this on two computers at the same time but need an easier way. If I duplicate tabs, it only opens the original source of the page I duplicate and not the current page I'm viewing so its a time taking process to click on the links where I need to be then start doing the control+tab. Speed is a major issue so any advice would be greatly appreciated.

I am still trying to figure out what it is you are trying to do.
You have X number of pages open, and you want what you do to one page
to also be repeated on the other pages? Most browsers think that multiple
pages are individual, and separate.
What is it you are working on? No secured information, please.

Find button on toolbar won't search current page

Post Author: sarasew13
CA Forum: .NET
I'm having an issue with the Find button on the standard report viewer toolbar for ASP. When I enter a search term and click on find, it starts searching on the next page even though there are entries (several) that match on the current page.
I found one mention on the internet that says it only searches forward (if you search from page 5 you won't get the entry on page 2) which is fine. However, this keeps the user from searching from page 1 (for example) when they are on page 1. If this is forward only (and that was only mentioned on a site not related to Microsoft or Crystal) then shouldn't it still look on the current page?
Anyone else have this issue?
Sara

Post Author: Ted
CA Forum: .NET
Yes. I'm using Crystal Reports for VS 2005 (ASP.NET). I don't see much written about this issue, but it sure annoys me, and my users won't like it either. Unless there is a better alternative, I'll remove the Find feature from the reports completely so that I don't have to deal with user complaints. They can use the browser Find to search a page at a time, or export the report and search using the exported format's application.

Pages 5.0 - Status bar current page & page count?

How do I show the status bar showing current page and page count? I do not need to see the full thumbnail bar.
In all prior versions of pages, I could look at the bottom of my window and see my current page and how many pages are in my document. Now, I glance to the bottom, and I have no idea. I cannot find any way to turn this on and turning on the thumbnails view does not show this to me at-a-glance because I have to scroll all the way down (through documents hundreds of pages long) to find out how many pages I currently have.
Please, what am I missing here, how can I make this show up again?
I mean a quick display here, not adding the page count and numbers to a documents footer. Although, that would be one way for me to solve this issue, but I do not always want that.

I wrote a short AppleScript solution that informs about the current document page as a pop-up dialog. This is for Pages v5+ only. I created and saved an Automator Application named CurrentPage to my Desktop. Providing that Pages is running, it will produce the dialog shown in subsequent Automator screen shot.
Double-click /Applications/Automator and choose New Document, Application, and Choose. Follow the Utilities > Run AppleScript (not Shell Script as shown), and drag Run AppleScript over into the larger window and drop it. Select all of its contents and remove them -- this is just boilerplate.
Copy and paste the following AppleScript into the now vacant Run AppleScript workflow window. Click the hammer, and File > Save... pick a name, and location to save the application where it is handy. Quit Automator.
Code:
-- P
-- Produce formatted dialog of document name, current page, and page count
-- Pages v5+ only. Works whether typing in document or scrolling pages.
-- VikingOSX, June 2014, Apple Support Community - Pages for Mac.
if not ApplicationIsRunning("Pages") then
display dialog "Pages must be running to use this utility."
return quit
end if
tell application "Pages"
activate
tell front document
set diagTitle to "Current Document Page"
set docName to (name as text)
set thePage to current page
set curPage to 0
set pageCnt to page count
set pnList to its page
repeat with ndx from 1 to count of pnList
if thePage is equal to item ndx of pnList then
set curPage to ndx
end if
end repeat
set vformat to "Document: " & tab & tab & docName & return ¬
& "Current Page: " & tab & curPage & return ¬
& "Total Pages: " & tab & tab & pageCnt
end tell
end tell
display dialog (vformat as text) giving up after 15 with title diagTitle
on ApplicationIsRunning(appName)
tell application "System Events" to set appNameIsRunning to exists (processes where name is appName)
return appNameIsRunning
end ApplicationIsRunning

How can I get the current user and the current page?

Hi everyone
Question..
It is possible to get the current user (from the user's database on apex) and the current page? (I mean, if I'm in page 4 be able to query a variable / function or something which could give me the current displayed page)
Thank you very much... I'd been researching without success :-S so I'll appreciate your help
Regards,
Fury

Fury,
If the user has authenticated, :APP_USER is the name that was used. The current page id is in :APP_PAGE_ID.
Although I showed bind variable notation for those, & substitution format and v() notation are also available for referencing developer-defined items or built-in names. See the User's Guide for more details.
Scott

Error with master page "insert current page number" when exporting book

Using InDesign CS 5.5 for Windows
Recently upgraded from InDesign CS (the really old one from 2003). I did save a copy of all my old version files and kept the old ID installed just in case (after reading all the horror stories on here).
In my old version of ID, I created a book made up of about 70 documents. Some of these documents are one page, others have multiple pages. In the multiple page documents, I used the "insert ... current page number" character (or whatever the command was in the old version) on a master page, and formatted it to read, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book to a pdf, it worked fine. (I do not want/have consecutive page numbers throughout the book, only in individual documents. By this I mean my entire book is about 280 pages, but not all of these 280 pages are numbered, just the groups of pages from these multi-page documents. It doesn't read page 1 through 280.)
Got my upgrade to 5.5 a few months ago, added some documents to the book, and (if i remember right) when I saved the book it asked to convert every old version document to the new version, which I said okay. When I exported the book to a pdf, some documents that are longer than 2 pages are now numbered wrong; the numbers are now going like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Every page but page 1 is now page 2 of whatever.
If I open the individual document and export it to pdf, the page numbers work fine. It's only when the document is exported with the book that the page numbers mess up. And it's not all the documents in my book; this error starts at a particular document and continues from that point throughout the rest of the book, affecting any document longer than 2 pages. Multi-page documents before this point in the book export with the correct page numbers.
I create new documents by doing a "save as" with a previously created document and cut and paste as needed, so I'm not having to reformat or set up page numbers on each new document. I don't use layers or styles (I'm sure there's a better way to do what I need, but I've only had time learn the basics, just enough to be functional.)
My attempts to fix this so far (using version 5.5), testing with the first document where the error appears: (1) I've removed the document from the book, deleted the insert current page number character, re-entered the insert current page number character, saved, exported the individual document to pdf and it worked fine. Put it back in the book, save, export, and it's wrong. (2) I took the document out of the book again, exported the document to .idml, saved as new .indd with new name, exported to pdf and it worked fine. Put it back in the book, save, export, and it's wrong. (3) I started up my old ID version, opened the old version of this document, exported to .inx, closed, opened .inx in ID 5.5, saved as new .indd with new name, exported to pdf and it worked fine. Put it back in the book, save, export, and it's wrong. (4) I moved the document up in the book order, putting it above a document that has correctly numbered pages, saved, exported to pdf, and this document was still wrong, but the one that has been numbered correctly all along is still correct. (5) I've compared settings for this document to others that number correctly and cannot find any difference.
It's like the page numbers get hung on "2" when I export the book, but only in the last two-thirds of the book. Sorry it's so lengthy, but I hope this description of my problem is understandable. Any advice, other than going back to my old version documents and starting over?
Thanks for your time and for all the awesome information this forum provides!
alice

Mr. Spier
Right after I posted my question, I saw a post from last year where somebody had similar problems. (I cringed because I spent almost 3 days researching this problem and never ran across that post; thanks for not scolding me for posting a semi re-run.) I decided to try one of the easier solutions: I opened the problem document from the book panel, went to the master page and deleted the text box containing the page number, copied the page number box from a document that worked correctly, and pasted it into the problem document. Saved that doc, closed, saved book, exported to pdf, and it worked!! The page number problem was fixed. I went back and did the same thing for the other problem documents and they all number correctly now.
Probably not the best way, but for now this will fix it; I may have to do it again next time I add to the book. Although I didn't follow your instructions, I'll mark this as answered since it's working now. If it keeps giving me problems, I'll try the .inx export/new book route.
thanks for your time
alice

Using Acrobat Reader activeX to get the current page views in a document

Hello,
I'm using the Acrobat Reader ActiveX control.
How can I use this API (or any other way) to get the current page of the PDF document inside the Acrobat reader ActiveX control ?
Thanks
Ariel

Aandi,
I reckon that you might be right.
But as side note, maybe Adobe will lose me and others as contributers for her PDF oriented solutions for other formats.
In the long run experts can tell which approach is better: a .Net like approach (no limitations upon development issues for ) or this kind of an approach.
Thank you very very much for you help!
Ariel

Cannot Print "current page" or "page range" in Compatibilty Mode in Word 2010

We are upgrading to Word 2010 from Word XP
All old documents open in Compatibility Mode
None can print a page range or current page, the whole document prints instead
I have tried to "Convert" to the 2010 format to no avail.
This does not happen on Documents created in 2010.
The only workaround I have found is to Copy the entire document into a New Word 2010 Document.
Is there a fix for this? Is anyone else having the same problem? It is not the same as the section problem I have seen all over these forums.
Thanks
Stuart Willis
[email protected]

Hi,
I am writing to see how everything is going with this issue. Have you tried to update the printer driver? Is the problem resolved?
For more research, this article may help us to continue to troubleshoot the issue
http://support.microsoft.com/kb/918790
Feel free to post back. Thanks.
Tony Chen
TechNet Community Support

Back button doesn't work due to multiple history entries for the current page. How can I fix this problem?

This problem started February 2015. I have noticed it mostly while searching ebay. When I hit the back button it did not work. I right clicked the back button and found at least 2 and sometimes up to a dozen duplicate history entries for the current page I am on, meaning I would have to click the back button a dozen times to get to the previous page. I am using Firefox 35.0.1 on a Vista computer. I have not found any fix for the problem after searching the internet for hours. I have seen similar issues with people using IE and some say the duplicate entries are caused by banner ads but still no one has provided a good answer or fix for the problem. Please help.

I will leave further answers to users of ebay. Script or adblockers may ease the problem.
* Try this add-on search [https://addons.mozilla.org/en-US/firefox/search/?q=blocker&platform=windows&appver=35.0&sort=users blocker] (Windows)

How To Display Current Page Name in Text Box Titles?

 I have a report which uses a page dimension. When I print out the report, it does display the page dimension member in plain text, near the beginning of the report. But I would like to incorporate the current page value in the formatted report title, a text box. The "MemberAlias" command, for example, looks like this: (( MemberAlias("GridName", Row/Col/Page, "DimName") ) ) (substituting the less-than, greater-than symbols for parentheisis just for this web forum) If I put a number in as the second element in the function, that hard-codes the report to print the page 1 value on each page of the printout. Unfortunately, Reports doesn't allow the "current" value in a text box. Is there a way to do this?

hi,
is there any generic fix for this. if we want to display then we need to change the each page CO . is it a possible solution. or any generic solution. Please provide
Thanks
Smarak

How can we change page format from A6 to A4 in smart forms

Hi,
Currently smart form is printing output in A6 page.Now my customer wants in A4 page.How can we change the page format from A6 to A4.Now the output should print in A4 page instead of A6 page.
I checked the page format in form attribtes it is DINA4.Do in need to change the page format here.
Is there any settings for this.Plase advice.I appriciate your guidence in this regard.Thanks in advance

Hi Vijay,
As the form is formated to A4, now the one A4 sheet and take a print out as well take a print with A6 sheet check the difference. If the data is not printed in right way then u need to do alignment.
If it's printing in the same as it used to be, then check the settings in SPAD.
Br,
Laxmi.Suryadevara

Page formats off after uploading to external server

I have finally successfully uploaded my organization's site created in iWeb to an external server. However, the page formats changed a little in the process. Small things, like graphics shifting position, font sizes changing ( I used "web-friendly" fonts throughout).
I currently have the site open in Safari, as well as iWeb open, to compare. Things look fine in iWeb, but how can I make sure they upload without changing?

There is no problem with having a shape with a text box dropped over it. This is preferable to typing your text in the shape itself as the text will then be converted to an image and increase your file size.
When you have, say, a text box and an image overlapping they tend to push each other about.
Try publishing your site to a folder on the desktop and double clicking the index.html file to launch your site in the browser direct from your hard disk. If its OK there then the problem is publishing.
Make sure you use a good FTP application to upload your files.

Understanding Margins in Smart Forms/Page Formats

Okay I have completed all my forms by rendering out all the data and now need to adjust the style to my liking. One issue that I am having is understanding the margins of a smartform and how they are defined? From what I have researched, the page formats are defined in T-code SPAD where the width and height of the page is set. However, I don't understand where the margins are determined.
I have placed a window that contains a table at x-position 0 with the width of the window and table the full page width (DINA4 = 210mm). In print preview, the document renders out fine with the table row stretching from end to end, but when I actually print it there is a 7mm left margin and a 10mm right margin, which cuts off the end of my table row.
So my question is, where are these margins set? Or is this because I have not/did not configure my printer settings correctly to communicate with the printer correctly? Once again I would like to reiterate that my print preview works correctly but the print output does not.

Okay from what you just said, translated to simple terms is pretty much: You cannot set the margins of the ACTUAL printout.
Here are my current settings:
Page format = LETTER
Left margin of all windows = 0.0
Window width = 21.00cm
device type = LX4039 (Lexmark Optra T616)
On the print preview The tables are left justified with no left margin, and there is a right margin that appears to be 8mm wide. This is great if it actually printed this.
When I actually print it though, I get this output:
Left margin of all windows = 7mm
Right margin of all windows = 5mm
All windows that were on the right side of my document are cut off early and the tables only have a width of about 20.7cm.
I could shrink my tables to make them fit but then they will not look centered, and I am trying to make every aspect of this form as professional as possible since our customers will see them. Can anyone fix or acknowledge that there is no setting I can alter to fix this?

Printing Current Page

When I am in a document that is 12 pages long how do I print "current page" on the LaserJet P1006? There is no option in the print menu for this and there are no page #'s shown on the screen to tell it what page # to print.

At least you are very funny and not a bother at all. I just had a discussion about Windows 8 - it is a good interface but is not setup like the conventional Windows 7. I want to know what web browser you are using? I went to a Windows 8 computer and tried to recreate everything you said. I am going to list some things and I would like for you to tell me what happens when you do it so I can follow along with you.
1 - I have right-clicked and found the print function in Internet Explorer. That is a convenient option. In the upper right hand corner was a gear. I clicked on that and Print was the first thing on my list. What happens when you go to Gmail and click on the gear in IE or the three lines in Google Chrome and select print? Do you have that option? Does it print?
2 - I went into the live apps. I chose the sports app and once that opened, I moved my curser to the right side of the screen and the charms bar opened. Unfortunetly the test unit did not have a printer installed but I would go to Devices in the Charms bar to print. No I could not recreate this step in a timely manner but try this step for me and let me know what happens please.
3 - What happens when you print? Does the format look okay? Does the print quality look ok? Most importantly - do you get an error message? I am very curious to know as this is very rare. I am more than happy to help so keep sharing your experiences. It helps others in so many ways.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Sap script current page name

HI experts,
can any body tell me how can i get the current page name in sap script.
In case of smartform we can get it by using sfsy-pagename. is there any way like this.
rgds,
bharat.

Hi Bharath,
Follow this procedure...
Got to
Insert (MENU)-> Symbols->System symbols-> TTXSY SAPscript system symbol
                                          (select it )
                                          Click Choose button
                            - from here select PAGE.
Insert (MENU)-> Symbols->System symbols-> SAPSCRIPT      SAPscript system fields
                                          (select it )
                                          Click Choose button
                            - from here select -> FORMPAGES Total number of pages
In editor it appears as &PAGE& &SAPSCRIPT-FORMPAGES&
just type Of between them as below
&PAGE& Of &SAPSCRIPT-FORMPAGES&
So that it will be in readable format for user.
Regards,
Basheer.

Duplicate current page format

Similar Messages

Maybe you are looking for