Duplicate customer environment on our Solaris box

Hi, I am new to here, and I am a dummy on iAS.
We got a tape back up of our customer�s testing machine. I would like to set up the �exact� same server on one or our Solaris boxes and run some tests on it.
After having the corporate computing guys loaded the tape to the box. I hacked through some files in
/mnt/opt/iPlanet/ias65/slapd-nccias/config
/mnt/opt/iPlanet/ias65/ias/registry
replaced customer�s host and domain names by our host and domain names on the LAN.
Now I can start the LDAP server. But when I tried to start the iAS, it failed and I got the following in the ias.log:
Connected to LDAP server on xxx-cissun19.abccorp.com port 389
iPlanet Application Server is running in international mode
iPlanet Administrative Server
Version 6.5, Build 20021121
Copyright (c) 1996-1997 KIVA Software Corporation.
Copyright (c) 1998-1999 Netscape Communications Corporation.
Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp. All rights reserved.
Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
Am I doing something that is not possible? Am I on the right track? Is there any documentation that walks people through this process?
You help will be highly appreciated.

Similar Messages

Solaris custom environment variables in crontab

Hi everyone,
I am searching a way to use custom variable on my crontab.
In fact, I need to launch a binary file which will use the "swap" command, but the swap command is not in the PATH of the crontab.
I know that on Linux it's possible to define directly a variable in the crontab, but in solaris it fails....
I tried this (for test) : env > /cron.env
and the output was :
HOME=/
LOGNAME=root
PATH=/usr/sbin:/usr/bin
SHELL=/usr/bin/sh
TZ=Europe/Paris
I also tried : source /etc/profile ; env > /cron.env
but the output was the same.
does anybody knows a way to define custom variable in the solaris crontab?
thx a lot in advance

Hi,
For example you need to set a veriable name IMAP_ROOT
Please follow the steps
1) Make a sciprt in /root (You can save the script as per your required location)
#vi Set_Veriable.sh
#!/bin/bash
IMAP_ROOT=/opt/OMC;
export IMAP_ROOT
2)Set the permission
#chmod 755 Set_Veriable.sh
3) Exectue the script
#. /root/Set_Veriable.sh (There should be a space between dot and /)
4) Now test the result
#echo $IMAP_ROOT
/opt/OMC
5) Now put the /root/Set_Veriable.sh file under cron
Please share your feedback.
Thanks,
Myth

There is already a record with duplicate customer/vendor reference number

Dear Expert,
Person "A" reject the Sale Order now Person "B" edit same SO and again send to "A",now second time "A" approval
"B" in aleart msg go to that approval,press "add" button got information (error)
"there is already a record with duplicate customer/vendor reference number"
what shud i do ?
and why in aleart message box two entry for same SO
1st is reject but show SO draft [approved]
2nd is approval ...
Thanks

hi,
U can change radio button option in per document tab of document settings for sales order,
Either change it to without warning / warning only When duplicated customer reference no. occurs.
Modify customer reference number by including dot at end.

Blocking of Duplicate Customer Ref Number in AR Invoice

Good Morning Experts,
Just want to know how to block duplicate customer reference number in AR Invoice Entry. System is currently give message that "Customer ref number already exists in this document type..".
My set up for Document Remarks Include in Document Settings is BP Reference Number. Is there any additional set up that needs to be done so that system will block duplicate reference number?
Version SAP 2007A
PL 30
Localisation Australia/New Zealand
Thanks
Sandra

Hi
You can try this sp_transaction notification : Copy the given code to store procedure sp_transaction notification where it says --add code here
if (@object_type = '13' or @object_type = '15')
and (@transaction_type= 'A' or @transaction_type= 'U')
begin
declare @venno as varchar(100)
if @object_type = '15'
begin
select @venno = NumAtCard
from opdn
where docentry =@list_of_cols_val_tab_del
if 1 != (select count(docentry) from ODLN with(nolock) where NumAtCard = @venno)
begin
select @error = 1
select @error_message = 'Duplicate Customer ref no in SO Receipts. ! '
end
end
else
if @object_type = '13'
begin
select @venno = NumAtCard
from opch
where docentry =@list_of_cols_val_tab_del
if 1 != (select count(docentry) from OINV with(nolock) where NumAtCard = @venno)
begin
select @error = 2
select @error_message = 'Duplicate vendor ref no in AR Invoices. ! '
end
end
end
This will block the transaction when you have duplicate customer reference . It will let you put same customer reference in Sales order but it will block from delivery
<b>Please test it in test environment </b>
Thank you
Bishal

Is it possible to create a customized survey with our organizations logo at the top?

Is it possible to create a customized survey with our organizations logo at the top? I'm trying to create a survey for our members but instead of using a template we would like to use something simple with our logo included at the top.

Just create a blank form and click Add Header at the top of the form page:

Using custom environment variables in the profile path

Hi,
I've created a custom environment variable that I've setup on two computers and the domain controllers. I want to use this in the profile path in user properties. However when users log in the variable is taken literally rather than being converted
into the value. For example
\\fileserver\share\user\%myenv%.v2 is generated rather than \\fileserver\share\user\envdata.v2
If I add in another built-in variable such as %OS%, that converts properly but any time I use a custom variable Windows just doesn't use it during the logon process. If I open up Explorer and type in the path to my data as it should be it works fine
so Windows is definitely picking up the variable, just not using during the logon process. I can't seem to find a TechNet article that states custom variables can't be used in profile paths.
Has anyone else come across this?
Thanks,
Tim

Hi,
Thanks for your post.
So did you create the environment variable using group policy? If yes, i would suggest you use 'Create' and not 'Update', the variable is then held through reboots.
Please refer to this blog, hope it will be helpful
http://blogs.technet.com/b/askds/archive/2013/07/31/roaming-profile-compatibility-the-windows-7-to-windows-8-challenge.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to restrict Duplicate Customer Creation in SAP

Dear all,
How can we restrict duplicate customer creation in SAP SD.
We are into retail sector, across the store customers are being created by different employees.
in this way for many customers more than one business partner records are being created.
we are looking for a sytem wise functionality to restrict the customer master creation (for Sold to party only) if name1, telephone number and street field values are same, then system has to stop customer creation by giving an error message.
Is there any standard functionality to address these requirement. If so how could we configure it.
Any of you can help us to solve the issue. your solutions and help will be highly appreciated.
thank you.
Raghu ram.
Edited by: Raghu Ram on May 26, 2008 5:34 PM

Hi,
2 solutions :
- Procedure manually (no SAP) ;
- Use extension SAP (SMOD : SAPMF02D) to check with differents data before recording.
No solution in standard.
Regards,
Lionel

How to include a new field for checking duplicate customer master

Dear All
we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
Procedure:
Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
regards,

Hi
Use the enhancement SAPMF02D to check these values.
Regards
Eduardo

Couldn't see LUNS fpr Compaq Storage array 1000 solaris box

Hi All,
I want to connect Compaq storage Works SAN array to solaris10 Box. I can see array as connected but state as unusable.
How can i see the luns from the storage on solaris box??
dmesg output:
Feb 1 08:29:54 testappl        ndi_devi_online: failed for array-controller: target=11000 lun=0 ffffffff
Feb 1 08:30:25 testappl fctl: [ID 517869 kern.warning] WARNING: fp(7)::PLOGI succeeded: no skip(2) for D_ID 11000
Feb 1 08:30:25 testappl genunix: [ID 599346 kern.warning] WARNING: Page83 data not standards compliant COMPAQ   MSA1000          2.38
Feb 1 08:30:25 testappl scsi: [ID 243001 kern.info] /pci@1d,700000/SUNW,emlxs@2/fp@0,0 (fcp7):
Feb 1 08:30:25 testappl        ndi_devi_online: failed for array-controller: target=11000 lun=0 ffffffff
Feb 1 08:47:27 testappl emlxs: [ID 349649 kern.info] [ 5.05F8]emlxs3: NOTICE: 730: Link reset.
Feb 1 08:47:27 testappl emlxs: [ID 349649 kern.info] [ 5.0337]emlxs3: NOTICE: 710: Link down.
Feb 1 08:47:30 testappl emlxs: [ID 349649 kern.info] [ 5.054D]emlxs3: NOTICE: 720: Link up. (2Gb, fabric, initiator)
Feb 1 08:47:30 testappl genunix: [ID 599346 kern.warning] WARNING: Page83 data not standards compliant COMPAQ   MSA1000          2.38
Feb 1 08:47:30 testappl scsi: [ID 243001 kern.info] /pci@1d,700000/SUNW,emlxs@2/fp@0,0 (fcp7):
Feb 1 08:47:30 testappl        ndi_devi_online: failed for array-controller: target=11000 lun=0 ffffffff
cfgadm -al output:
bash-3.00# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 CD-ROM       connected    configured   unknown
c1                             scsi-bus     connected    configured   unknown
c1::dsk/c1t0d0                 disk         connected    configured   unknown
c1::dsk/c1t1d0                 disk         connected    configured   unknown
c1::dsk/c1t2d0                 disk         connected    configured   unknown
c2                             fc           connected    unconfigured unknown
c5                             scsi-bus     connected    unconfigured unknown
c6                             fc           connected    unconfigured unknown
c7                             fc-fabric    connected    configured   unknown
c7::500805f3000186d9           array-ctrl   connected    configured   unusable
usb0/1                         usb-device   connected    configured   ok
usb0/2                         unknown      empty        unconfigured ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         unknown      empty        unconfigured okthanks in advance.

Looks like the LUN is not configured correctly on the storage array. The kernel can't take the LUN online.
I have seen this on various boxes, most of the time it was either that the LUN wasn't set online on the SAN box or there is a SCSI reservation on the LUN.
Can you access the LUN from another host?

Executing customer exit variable in dropdown box. in WAD

hi Experts,
i have implemented two customer exit variables for current month and next síx months in a query and it is working well, and the code for customer exit variable is correct.
we have a requirement to use the customer exit variables in dropdown box in web application designer. in the dropdown box in web application designer i used command SET_SELECTION_STATE_SIMPLE in that 'command specific Parameters' i had given the exit variables current month and next six months.but after executing the web application designer and if i drill down the report with current month and next six months it's giving error message .
can anyone please tell me how to implement customer exit variables in web application designer through drop down box. i am using this in bi7 reports.
Regards
Sruthi Reddy

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
Can anyone share their experiences and how to with me?
Thank in advance.
Katherine

Hi Katherine,
yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
HTH
Borys

Why are our picture boxes in illustrator printing thin white outlines of each box a picture is in

why are our picture boxes in illustrator printing thin white outlines of each box a picture is in

Couldn't tell you, I'm afraid. You've posted in the Audition forum, and we only know about sound here. You need to find the Illustrator forum, and post there.

Unable to install ALSB3 on Solaris box

I try to install alsb on solaris box using the command :java -jar alsb300_wls100_generic.jar, but always get the bellowed error
Exception in thread "main" java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:114)
at java.util.jar.JarFile.<init>(JarFile.java:135)
at java.util.jar.JarFile.<init>(JarFile.java:72)
Is there anyone has uncounted this issue? Thanks in advance.
Edited by: user11110550 on Jun 16, 2010 8:01 PM

Hi,
Make sure you have given the correct rights for the .bin file to execute, also do have a look at the below link to get more information on how to install a .bin file
Topic: Starting .bin Installation Programs in Graphical Mode on UNIX Machines
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/guimode.htm#BABFBABI
If you need to install it in Silent mode then check the below link
Topic: Silent Mode Installation of WebLogic
http://middlewaremagic.com/weblogic/?p=1716
Regards,
Ravish Mody

Is it possible to install Two iAS 6.5 SP2 instances on a single solaris box

Hi,
I have iPlanet Application server 6.0 SP2 installed on sun solaris 2.7.
Now, I want to install one more instance of iAS (same version) on the same solaris box. Just wondering, is it possible, because i think in case of Sun One Apps Server 7 its not possible.
If its possible, is there any specific configuration I have to make ?
Thanks in advance,
Prakash

Hello,
I think it is possible to have two instances of IAS 6.5 on one machine because last year I had similar situation with IAS 6.5 Enterprise - I instaled it twice and put them in cluster. Things were just fine.
Each creation of instance of app server meant new installation of IAS software in different install folder, where second one used Directory Server installed durring the first installation.
I remember that I had only one Directory Server installation where each IAS instance had its own space for configuration data (by specifying diferent name for "IAS global config params" during the installation) and different set of port numbers for IAS processes. Finnaly, I put these two instances in a cluster...
IAS 7.0 (Sun One App server 7.0) has different approach regarding creating and configuring several app server instances, because creating one more instance of app server doesn't mean another installation of software...
Regards
Vladimir

Custom code in Notification Action box

Hi All,
I have called a custom FM through Notification action box configuration.One custom screen is also called from th ecustom FM. Now when I am trying to save the Notification through IW52 transaction then it is giving the dump.
If I execute the FM individually, it is working fine.
Please let me know what else I need to add to avoid this dump.
If the issue got resolved reward points must be given....earlt response apprecited.
Regards,

Hi,
What is the dump message you are getting, can you share some details ?
Regards,

Duplicate customer environment on our Solaris box

Similar Messages

Maybe you are looking for