Duplicate Detection Shows Clips That Are Not Dupes !

Let me admit at the outset that this is not a serious problem, just a curiosity.
I experimented with the "Show Duplicate Frames" command on a project and had loads of coloured lines appear denoting duplicates.
The only trouble is that there is not a single duplicate frame used in that project !
I then created another "test" project by importing a clip and breaking it down into subclips. I dragged them all from the browser to the timeline and then dragged another one that was obviously a duplicate.
It worked perfectly and the 2 dupes showed up in red.
So why has the original project got numerous false dupes? Incidentally this "problem" project was captured as 3 clips (from the same tape) which were then split into subclips.
Any ideas what is going on?

For detecting dupes, FCP looks at 2 things: the time code and reel number. If you have not changed the reel number from the default 001, and all your tapes start at 00:00:00:00, then you will have several clips with identical time code and reel numbers, which FCP will then assume are the same clips, just digitised at a different time. Not changing the reel number is a _bad habit_ because, if you ever lose your media and have to redigitise, you will be up the proverbial creek, not knowing what reel to put in when the system asks you for "Reel 001". Label your tapes and log your reel numbers!!!
j0n

Similar Messages

Report to Show PR that are not released by release codes

Hello Experts,
I would like to know if there is any report on SAP 6.0 that shows all the purchase requisitions that are not released which shows the releease code (the person's name who has to release the PR). In me55 only could be found by release code, and it is required, I cannot has a report
I think that there is not, but i would like to confirm it.
Thank you in advance,
Best regards

Hello,
1)Go to ME5A t-code & select DYNAMIC SELECTIONS.
2)Select "Purchase Requisition" section and you can make use of parameters like Release Code, Release Indicator , Release Status etc., to fetch the required results.
Hope this helps you in resolving your matter.
Regards
Mahesh

ITunes Match on my iPhone shows songs that are not in iTunes on my Mac and PC.

Yes, I know that deleting songs from iTunes does not necessarily mean they are deleted from iTunes Match, too. Not checking the box when deleting songs is definitely not why this is occurring, so hear me out. My Mac hosts my main iTunes library. What I do there, is synched with iTunes Match. In iTunes in Boot Camp, I have no local files, so all that iTunes on Windows shows me, are the songs that are matched with and uploaded to iTunes Match. As far as I can tell, it's exactly the same as my main library on my Mac.
It's a different story on my iPhone, though. There are songs that show up on my iPhone that I have deleted on my Mac. Some several times, even. A little while ago, I ripped one of my CDs and had it matched with iTunes Match. I made some changes to the metadeta afterwards, though, so I deleted the songs and added and matched them again. And again, that same day. I did the same things with a single song.
And now I'm stuck with three copies of the album and of the song in iTunes Match. But the weird thing is, that only one of each shows up in iTunes on Windows. That library, again, does not have any local music; it only shows what's in iTunes Match. I have tried disabling iTunes Match on my iPhone, I have deleted all local content on my iPhone, I have deleted the album and the song – the files that are showing up multiple times on my iPhone – from my Mac, updated iTunes Match, re-added the files and updated Match again. Unfortunately, none of this helped.
After deleting the files and updating Match, I saw only two instances of the album and the song in question, instead of three. After re-adding them and updating Match again, there were three of each again. That means that there are two instances of the album and of the song 'stuck' in iTunes Match. And yet they don't show up in iTunes on either OS X or in Windows.
Why is this happening? And, more importantly, how can I fix it? In the grand scheme of things, this is obviously a minor problem, but it's annoying me a lot nonetheless.

Is there really nobody else with this problem? Really?

Why is Creative Cloud showing applications that are not installed?

For some reason Creative Cloud is showing applications that I don't have installed as installed (see below).
I posted the VERY frustrated question of "why won't Creative Cloud uninstall?" and was met with NOTHING useful, and ended up having to
"manually uninstall" (delete the program folders) all of the programs I didn't want including CC, which I then re-installed.
The programs that I don't have installed below are: inDesignCC, PhotoshopCC, IllustratorCC, InCopyCC, and Bridge.
I was able to run the Adobe Cleaner on Indesign CC and Bridge, but nothing else.
Does anyone know why I can't get rid of the rest?

CC desktop lists applications as "Up to Date" when not installed

Why is firefox randomly playing advertisment clips that are not present on the screen?

I just downloaded Firefox 4 and now whenever I choose a new website or search, some kind of advertisement clip plays. I cannot find any ad box to close it or pause it, but it cuts itself off after about 30-60 seconds. If I stay on the website it repeats the same ad again. (Even on this site I have had random ad clips playing). I am not very computer literate so I don't know if its something I need to do on my end to shush these ads (preferably permanently) or something that I might need to seek help for.

Sounds as if you have some Malware on your PC.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Viewer shows clip that's not on timeline

I have a very strange problem, which might have an easy solution, as my knowledge of FCP has gaping holes in it.. I'm editing a clip, using 2 video-tracks and 2 audiotracks to fade and overlap and stuff. In the middle of a (uncut) stretch of video, the viewer shows me a small part of video that's way before that, chronologically, and shouldn't be there at all. When I stop playing, the viewer shows the image that should be there again. When I scrub through the stretch of video, it all looks normal. When I play it again, the 'wrong' piee of video comes up again. There's no material on my second video track, and I've tried moving the stretch of video in which it occurs: same problem at the same spot. It looks like the second piece of video is stuck underneath the first and moves with it, or something. Unfortunately (and logically) the piece of wrong video shows up in the exported movie as well. Does anyone have a solution? Oh, to make things easier, I'm still using 6...
Thank you,
Elizabet

First, what format are your clips and what are your sequence settings?
Does this section require rendering? If so, is it rendered? If so, toggle on and off the clip (control-b) to see if that fixes things.
could be a corrupt sequence. Create a new sequence with the same settings, make the old timeline active, select all (command-a), copy (command-c), Make the new sequence active and paste (command-v).

How detect method calls that are not already in 1.4

My program is compiled with JDK 1.5 or 1.6 and retroweaved to 1.4.
If I do not take care I may type
int i=65;
Character.isDigit(i);
instead of
Character.isDigit(char)i);
Without casting to char it uses a method that exists only since 1.5 but not
yet in 1.4.
There are a few other methods that had been added since 1.5
Their use leads to NoSuchMethodError on 1.4 clients.
Their usage must be avoided.
How can I recognize them at compile time?
Or has anybody written a tool to check all method calls
whether they already exist in 1.4 ?
If not I would write it myself and probably will use the javap output.
After reading through the docs of java.lang.reflect.Method I guess that
there is no flag telling when a method had been introduced.

there was some discussion on that here:
http://forum.java.sun.com/thread.jspa?threadID=586602
If you use ant, you could also try and configure the src and target properties of javac task:
http://ant.apache.org/manual/CoreTasks/javac.html
Alper

Shared calendars are showing events that are not on my calendar

I have shared a calendar with my wife. When she looks at my shared calendar (on mac, on iOS, on icloud.com), she sees events that I long ago deleted on my calendar. I do not see those events any longer on my calendar (on mac, on iOS, on icloud.com). I have tried unsharing, then resharing. Any way to completely clear out my shared calendar?

Looks like it was a really weird situation. If I viewed the event in my shared calendar on her computer, I could see that I was invited to my own event. So I gave her edit permissions then she could delete the event and all is good now. So weird that it didn't show up on my computer

Application manager shows apps that are not installed as Up-to-date

Flash and Premier pro not on my computer, application manager says they are Up-to-date
Edge Animate is in the applicationfolder, AppManager asks me to install ...
Did a restart of the computer, did try an uninstall but the applications don't show,
did a P-Ram cleanup,.
Rudy

Rudy please see Creative Cloud AAM lists Applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to resolve your current difficulties.

Joining spanned clips that are not avchd

I have a storage device that is fat32 and stores Video clips in 10min intervals. Is there a way to put the individual clips back together without placing them all on the timeline and rendering them out? They are stored as .dv clips if that helps. Thanks for the help.

If they're .dv files, they need rendering (or converting prior to import) in FCP. FCP doesn't use the .dv codec natively (iMovie does). FCP uses the QuickTime DV/DVCPro codec.
Once converted, you should be able to place the end-to-end on the Timeline without any issues - IF they were recorded correctly.
-DH

Why does my sports content show teams that are not my favorites

I have selected certain teams to show in my Sports Scores. Today the Scores box began showing other team scores which I have not selected. Why is this happening?

I have no idea, the troubleshooting information that you provided does not have any sports add ons, may I ask if this is associated with an account that you may have been logged out of? If so, please configure the account or switch back. Most likely Yahoo sports?
Sign in here: [http://www.cbssports.com/nfl/scoreboard]

Report Usage (show those that are not used)

How do I identify which reports haven't been accessed in the last 12 months?
Below is the script to show the current report usage... but i need to know which ones haven't been accessed
select c.name,
e.userName,
e.format,
e.parameters,
e.timeStart,
e.status
from REPORTSERVER.DBO.EXECUTIONLOG e
left outer join charon.reportserver.dbo.catalog c on e.reportID = c.itemID
where
e.timeStart >= dateAdd(mm,-6,getDate())
order by timestart desc

select *from charon.reportserver.dbo.catalog cwhere c.itemid not in (select c.itemid
from REPORTSERVER.DBO.EXECUTIONLOG e
left outer join charon.reportserver.dbo.catalog c on e.reportID = c.itemID
where
e.timeStart >= dateAdd(mm,-6,getDate())
Andrew Sears, T4G Limited, http://www.performancepointing.com

How do I create a smart playlist of songs that are not in any playlist?

I have zillions of songs and many playlists to manage them. So how do I create a smart playlist that shows songs that are not in any playlist?
An easier answer would be " Playlist > is > None" but this option is not available.
Any other creative solutions?
(...and a long list of "Playist > is not > Playlist AA" through "Playist > is not > Playlist ZQ" is not a manageable answer as my playlists are too dynamic for that. Such a playlist would always be broken.)

Maybe one of these will help:
This AppleScript will create a text file that will list the iTunes Library tracks which have not been assigned to any playlist. http://dougscripts.com/itunes/scripts/ss.php?sp=notinanyplaylist
This script searches your iTunes or iPod Library for tracks which have not been included in any Playlists and copies them to a new discrete Playlist. http://dougscripts.com/itunes/scripts/ss.php?sp=notinanyplaylistplaylist

Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

Basically, I have 2 problems:
1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
My camera:
HD: 1080p
Settings: At Hd
2)
Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
IS ANYBODY OUT THERE? : )

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

IPod is showing duplicates of songs, but songs are not duplicated in iTunes.

iPod touch is showing duplicates of songs, but songs are not duplicated in iTunes... any ideas how to fix? Tried resyncing, didn't work.

I'm fishing slightly but you may have casing inconsistenices in artist or album names that cause the iOS firmware to see more than one instance of the album but with each getting all the tracks. Merging stuff in iTunes via sort fields may also have unintended consequenses on the device. Could you post back a screenshot or decribe the symptoms more fully, ie. exactly which menu screen you are in on the iPod, what is repeated etc. The songs menu for example can correctly list more than one copy of a song if it appears on different albums.
tt2

Duplicate Detection Shows Clips That Are Not Dupes !

Similar Messages

Maybe you are looking for