Duplicate Drive on Windows 2008 SP2

Dear Expert !
currently. i m managed Windows 2008 x64 SP2. in the Disk Management these are three logical disk as attached . But when open windows explorer these are two Z drive duplicated similar size, file name.. . please give me advise .
thank you and appreciate

Hi Viet,
Based on your description, the issue seems to be caused by that you associate a folder path with a drive letter
by using the SUBST command. Would you please open a command prompt and type
SUBST command, then check if there has substituted drive letters.
For more details of
Subst command, please refer to following TechNet article.
Subst
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Upgrade ASM Oracle 10.2.0.4.0 to ASM Oracle 11G R2 on Windows 2008 SP2

Please advice on procedure or where I can find information on upgrading ASM from Oracle 10G to Oracle 11G R2 (Winwdows 2008 SP2 64bit environment) for mutiple Oracle instances (not a RAC environrment).
The current scenario is as follow:
- Two oracle homes; one for ASM instance and another for the Oracle Databases (in current case only two oracle instances possiblly more at a later time). Both (ASM and Oracle databases) have the same version of Oracle 10.2.4.0.
The Oracle database home can't be upgraded due to application restricition (Vendor Application not tested on Oracle 11G) but will like to upgrade the ASM instance to Oracle 11G (Oraclle 11G R2).
Questions:
- Is is a feasable solution? Can I upgrade ASM instance to Oracle 11G R2 to take advantage of new features? Will the ASM upgrade scenario is compatible with the Oracle Database Instance running Oracle 10G? Any possible issues that I should be aware or concerns?
Is it possible to have ASM running in Oracle 11G R2 and service the need of Oracle database instance running in 10G?
Please advice or where I can obtained information on the matter. Also possibly if someone has done it on Windows 2008 SP2 (not Windows 2008R2).
Thanks in advance

Thanks so I can upgrade the ASM Home instance and leave the Oracle Databases home on Oracle 10.2.0.4.
I agree with you not just 100%, actually 120%. Fortunately, the vendor is finally understanding by pressure provided by DBAs and Application Teams that they are very behind the curve. It is working and by summer we should have an oracle 11G compatible product.
The same thought went when I was told of their compatability database level.
Regards
Albert

Add additional IP to Windows 2008 SP2 Cluster

Dears,
I have a 2 node SQL 2008 Cluster 64bit (non r2) on Windows 2008 SP2 64bit (non r2) Server.
I need to add additional IP (different subnet) to the Cluster Quorum Resource.
Kindly guide me the steps to add the IP ?
Thanks
Tariq

HI Tim,
Well we need more than one IP address on the Cluster (Quorum) for our replication to work as for some reason we cannot use the production IP which is currently configured for this Cluster.
Further if you are doing multi-site cluster with different subnet then you may need two IP with different subnet on the cluster (not for services or application)
I found this usefull command and it worked on the win 2008 sp2 (non r2) server:
C:\>cluster . res "FS IP Address" /create /group:"file server" /type:"IP Address" /priv address=192.168.1.106 subnetmask=255.255.255.0
For win 2008 r2 servers there is powershell command through which we can achieve the same.. :)
it took me hard time to figure out that "failoverclusters" module will not work for win2008 SP2 server.. !!
Thanks

How to Mount IBM Tape Drive on windows 2008 SAP Platform

Hi Expert,
What are the steps for Mount IBM Tape drive on windows 2008 SAP Platform on Sybase Database ?
After mounting IBM Tape Drive on windows 2008 SAP Platform , can i use this for Sybase Backup purpose from DBACOKPIT ?
Kindly reply me ASAP.

Dear All,
Problem Solved by below activity :-
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc38421.1572/doc/html/san1335472614455.html?resultof=%22%64%75%6d%70%22%20%22%64%61%74%61%62%61%73%65%22%20%22%64%61%74%61%62%61%73%22%20
1> dump database pubs2 to "\\.\TAPE0"
2> go
1> load database pubs2 from \\.\TAPE0
2> go
Please review any of these SAP Notes to see if you would be able to
setup dump/load and then copy to tape as an option.
1585981 SYB: Ensuring Recoverability for Sybase ASE (has some
comments about storing to tape drive)
1588316 SYB: Configure automatic database and log backups
1611715 SYB: How to restore a Sybase ASE database server (Windows)
1618817 SYB: How to restore a Sybase ASE database server (UNIX)
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
Configuration DEVDB:
1> sp_config_dump @config_name='DEVDB' ,
2> @stripe_dir = "\\.\Tape0" ,
3> @compression = '101' ,
4> @capacity = '1520000040960' ,
5> @verify = 'header'
6> go
Configuration DEVLOG:
1> sp_config_dump @config_name='DEVLOG' with init,
2> @stripe_dir = "\\.\Tape0" ,
3> @compression = '101' ,
4> @capacity = '1520000040960' ,
5> @verify = 'header'
6> go
1> dump database DEV using config = 'DEVDB' with capacity = 87000000, init
2> go
1> dump transaction DEV using config = 'DEVLOG' with capacity = 87000000, init
2> go
and
1> dump database DEV to "\\.\TAPE0" with capacity = 87000000, init
2> go
1> dump transaction DEV to "\\.\TAPE0" with capacity = 87000000, init
2> go

Error Installing Print Driver on Windows 2008 Server R2

I am getting an error installing the Xerox Print driver on Windows 2008 R2. Here is the event viewer detail. Any ideas?
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 06/24/2014 10:47:11 AM
Event ID: 215
Task Category: Installing a printer driver
Level: Error
Keywords: Printer Setup,Printer
User: SYSTEM
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Installing printer driver Xerox ColorQube 9303 PS failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>215</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>19</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000220</Keywords>
<TimeCreated SystemTime="2014-06-24T15:47:11.407265800Z" />
<EventRecordID>82</EventRecordID>
<Correlation />
<Execution ProcessID="1124" ThreadID="3836" />
<Channel>Microsoft-Windows-PrintService/Admin</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<SetupInstallPrinterDriver xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">
<Label>InternalInstallPrinterDriverFromPackage</Label>
<Message>pfnPSetupParseInfAndCommitFileQueue failed</Message>
<AdditionalInfo>-</AdditionalInfo>
<InfPath>-</InfPath>
<DriverName>Xerox ColorQube 9303 PS</DriverName>
<InstallSection>-</InstallSection>
<ProcessorArchitecture>Windows x64</ProcessorArchitecture>
<PackageAware>Not package aware</PackageAware>
<CoreDriverDependencies>-</CoreDriverDependencies>
<LastError>0x0</LastError>
<HResult>0x80070705</HResult>
</SetupInstallPrinterDriver>
</UserData>
</Event>
Ray Pietrzak

Hi Ray,
On current situation, please refer to the following KB and check if set
Point and Print Restrictions policy to Disabled. Then monitor the result.
Event ID's commonly associated with point and print
restrictions
In addition, I noticed that there was a thread which you created one year ago. It seems to be similar with
current issue. However, please have a look.
Windows
2008 Server
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Problems using SQL Server 2014 upgrade advisor on a windows 2008 sp2 server

I got sql server 2014 upgrade advisor up and running on a windows 2012 vm and every thing works fine, but I am having trouble installing it locally for a SSRS Box. The SSRS box is running windows 2008 sp2 enterprise edition, but when I try
and run the SQLUA.msi install nothing happens.
anyone else experience this issue?

Hi jesse,
Welcome to the forum :-)
Can you please clarify your issue in more details. I did not understand what you are doing. What do you mean by "installing it locally for a SSRS Box". Do you mean that you are trying a simple installation which do not work, and raise an error?
If so then (1) we dont need the extra information about "why you need the SQL Server" :-) we just need to help you install it regardless the SSRS. (2) We do need the full error log and the error message that you get.
By the way, The SQLUA.msi is just a small utilities named "Upgrade Advisor"
http://msdn.microsoft.com/en-us/library/ms144256.aspx
Do you want to install the SQL Server itself?
What is your current SQL Server on the local windows 2008 server?
[Personal Site] [Blog] [Facebook]

Dism command in windows 2008 SP2

Ho do I run the command
dism /online /cleanup-image /spsuperseded to clean up winsxs folder in windows 2008 SP2.I got message /online command works only in windows 2008 r2,and in windows 2008 sp2 it needs to be run in offline,can any one give idea how i run this command
in windows 2008 sp2

Hello,
Firstly, please keep in mind that WinSXS folder is an important directory that keeps the shadow copy of the important system files, which gets changed during any installation of Patches or Updates or software. With the use of WinSXS Folder all system files
can be reverted back to the stage where it was before installation of Patch/Update. Hence, it’s not wise to wipe the WinSxS folder.
Secondly, just like the warning message suggested, DISM can only be used in Windows 7 and Windows Server 2008 R2 (Not in Windows Vista or in Windows Server 2008). For Windows Server 2008 SP2 or Windows Vista SP2, there is tool called Windows Component Clean
Tool (COMPCLN.EXE).
Refer to: Windows Component Clean Tool
http://technet.microsoft.com/en-us/library/dd351467(v=WS.10).aspx#BKMK_COMPCLN
•Windows Vista or Windows Server 2008 Service Pack 1: VSP1CLN.EXE
•Windows Vista or Windows Server 2008 Service Pack 2: Compcln.exe
•Windows 7 or Windows Server 2008 R2 Service Pack 1: DISM /online /Cleanup-Image /SpSuperseded or Disk Cleanup Wizard (cleanmgr.exe)
Thanks
Zhang

Oracle 10205 on Windows 2008 SP2 certified?

I was able to install 10205 on Windows 2008 R2 using their special instructions, but can't seem to find Oracle statement that it can be installed on Windows 2008 SP1/SP2?

Hi,
Yes. The 10.2.0.5 patchset is not specific to a Windows version (it's a general rule for the patches/patchsets under Windows). The only distinction is 32 bits / 64 bits in this case.
There was a particularity for the base release to be used for Windows 2008 but you noticed it.
Best regards
Phil

SQL Server Reporting Services won't start - SQL Server 2008 R2 SP1 on Windows 2008 SP2

All has been fine for some time, this server runs SQL and SSRS.
Recently reporting service says it starts, then stops. No changes of which I am aware.
This is in the application log:
Service cannot be started. System.Exception: Default appdomain failed to initialize.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start()
at Microsoft.ReportingServices.Library.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
I've tried changing the account to a domain admin, just to see - but it doesn't help.
Thoughts? Help?

Hi BlakeDuffey,
Generally, we may see the error messge "Default appdomain failed to initialize" in the application log when try to start Reporting Services if the RSreportserver.config file has been modified unexpectedly. At this time, I suggest that you back up your
current RSreportserver.config file, and then check the config file referring to the following article:
RSReportServer Configuration File
Note: The RSReportServer.config is located in the <drive>:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer folder.
If you cannot find the exceptions in the RSreportserver.config file, please post the config file so that we can help you to check it.
Meanwhile, please also check the Reporting Services Log file to see if there are any error messages related to the issue. If there are, please post the error messges as well. The Reporting Services Log file is located in the <drive>:\Program Files\Microsoft
SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles folder.
Hope this helps.
Regards,
Mike Yin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Mike Yin
TechNet Community Support

Installing Oracle 10g on Windows 2008 SP2 64bits

Hello,
I downloaded this version: 10204_vista_w2k8_x64_production_db. The setup starts fine, I set the location for the Oracle Home directory to (C: \oracle\product\10.2.0\db_1), click next, the setup continue and then stop with the following message: "the name Oracle home directory is invalid. Oracle home directory can not exceed 128 characters ....>> (translate from french)
Other info:
- I set the local administrator account on the machine
- I downloaded twice the archive (I thought it was corrupt)
- This install was within a VMWare VM, I tried on a physical W2K8 server and same message popup
- The latest Windows update are installed on the server
- I searched on Google but people who have encountered this problem had indeed spaces or invalid characters in the path.
I really don't what I did wrong.
Thank you for your help.
Chris

The setup starts fine, I set the location for the Oracle Home directory to (C: \oracle\product\10.2.0\db_1), Create this directory manually, and try using the browse button on the installer in order to select this directly.
Try this and see

Error with HP LaserJet Professional M1212nf print driver on Windows 2008 (32bits) Terminal Server

We got a lot of LaserJet m1212nf printers, installed the SAME driver version on server and desktops and nothing is printed using Easy Print. No errors, no messages but nothing is printed, only when a test page is printed the server show an alert: "No test page can be printed".
After that we try to use the HP driver instead of the TS Easy Print, forcing the group policy to use the Hp driver first. But the terminal server always use the Easy Print driver so we are in the same way.
So we try another thing... THE XPS DRIVER... but it doesn't works on the desktop PC, we try to print a test page from the printer desktop properties but "No test page can be printed" is shown... my god!!!
WHAT CAN WE DO??
This question was solved.
View Solution.

Hello,
Thanks for the post. I've included a couple of links below, one to a document and one to a software download. Hopefully between these two we should be able to get this installed and get you up and running. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01998962&cc=us&dlc=en&lc=en&product=3965849&tmp...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-81123-2&cc=us&dlc=en&lc=en&...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

ODI - cannot be installed in Windows 2008 SP2

I downloaded the new hyperion 11.1.2 include the ODI, and then I extracted the ODI files and I run the setup, but nothing happen? should I extract the files in the same folder as the other hyperion extracted files?

This forum is for issues with the SQL Developer tool... do you have one?
Regards,
K.

Windows 2008 Server Enterprise R2 x64 and Perc 4/dc SCSI driver issue

Hello all, this is the first time posting so please forgive me if this has been posted here before. I did try to search this issue but zero returns.
OK, I have a Dell PowerEdge 2900. I have just put a fresh install of MS Windows 2008 ENT. Server x64. I cannot seem to find a driver for the PERC 4/dc SCSI controller I have installed. I have been told the 2003 x64 driver would work so I attempted to install that driver but was unsuccessful. Then I was told by Dell that the driver should be native to the OS. Is the driver native to 2008 Server (or, supposed to be)? Does anyone have an answer as to where I might retrieve am driver of the controller if not? Anyway, thanks in advance

Hello,
I don't have a PowerEdge 2900, but I do have a PowerEdge 2850. I'm also just a regular bloke like yourself that just happened upon your post and after I figured this driver debacle out I registered to hopefully help.
The good thing is my PERC card is the same in the PE2850 as it is in your PE2900, as I'm utilizing a PERC 4/DC. I've also managed to run into the same issue you ran into(?) trying to load Windows 2008 Server Enterprise R2 (support for 32bit processors have been removed in R2... so no more x86 versions... my poor PE2650s never stood a chance with this OS).
I can tell you officially from my experience/research Windows Server Enterprise R2 does not have support built into it for the PERC 4/DC card.
However, I was able to download the Windows 2003 x64 driver from support.dell.com and make it work after much trial and error with newer releases of the PERC 4/DC driver that were not accepted by 2k8R2.
Here's the link: http://support.dell.com/support/downloads/download.aspx?c=us&cs=RC956904&l=en&s=hied&releaseid=R100373&SystemID=PWE_PNT_P3C_2850&servicetag=FBCLP61&os=WX64&osl=en&deviceid=6396&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=3&libid=35&fileid=129549
File name (incase Dell moves it on you guys) is "perc-w2k3-6.46.3.64-A01.exe", date released 6/9/2005, build version 6.46.3.64, and the Dell revision number is A01.
Even though it states the driver is for the LSI Logic PERC 4e/Si it's sort of a mega pack including many other drivers such as the PERC 4/DC. This was much relief because I was thinking I would need to stick with Windows 2008 until I found this driver for Windows 2008 R2. :)
What I did was:
1) Downloaded the driver and extracted it to a USB drive.
2) Booted-up via the Win2k8R2 CD and when it got to the screen where it asked to install to a partition and didn't show me a partition to install Win2k8R2 to I selected the option to load a driver.
3) From the load driver option I just browsed to the directory where I extracted the files and selected that directory. If the "hide devices that are not compatible" option is selected (normally on by default) it will show you the proper driver.
4) Select the PERC 4/DC driver and then setup your partitions the way you would like them!
From there you should be able to boot into the OS... and really have some fun.
Now you have the power... I guess the choice is yours to R2 or not to R2... that is the real question. :)
Enjoy!
Dave
Thanks and this worked for a Power edge 1800, PERC 4/DC as well. Kukan

I cannot map a windows 2008 shared drive into mac 10.5.8

Hi Support,
I have tried to map a shared drive from windows 2008 x64 on to Mac 10.5.8. however, it is unsuccessful and it prompts
"the file server is running on your machine.Please access the volumes and files locally."
after i clicked ok,
it prompts
"the finder cannot complete the operation because some data in "smb://<server ip>" could be read or Written. (Error code -36)"
Please advise .
Thanks.

Hi, since nobody is answering yet...
For error -36, might try this...
http://docs.info.apple.com/article.html?artnum=301580

Oracle obdc driver 32-bit doesn't run on 64-bit windows 2008 server r2

Does anyone know a way to run OBDC driver on windows 2008 server r2?, a way to run the app?

Pl post in the Heterogeneous Connectivity forum (Heterogeneous Connectivity as this forum is meant for issues related to database installs
HTH
Srini

Duplicate Drive on Windows 2008 SP2

Similar Messages

Maybe you are looking for