Duplicate Email Notifications on iOS5

I am currently having issues with notifications on my iphone, but not all the notifications, just my email.
I checked the settings for notifications already (banner, bubble, etc)
All other items show up as a single notification, but for emails, i receive duplicates, even though I only receive the email once.
Is there something I set up wrong to have this happen (ie: iCloud, email, notifications, exchange email)?
I am definitely sure that its just email and its not any other items that are duplicated.
Thank you.

Found this answer which worked for me
For anyone else with the problem. I went into settings; Mail, Contacts, Calendars; Accounts; then turned off one of the "mail" options on my two email accounts.
One account is for email.
One account is for syncing my calendar.
at: http://www.iphoneforums.net/forum/iphone-3g-54/double-email-notifications-7603/

Similar Messages

  • Duplicate email notifications in using extended notification

    Hi,
    I have configured extended nottification to send workitem notifications to outlook email inbox by using SWNADMIN & SWNCONFIG.  I have executed the SWN_SELSEN program to send notifications out.  However, I am getting two duplicate email messages for every same workitem.  Has anyone run into this same issue?  If you have, could you share how did you solve this problem.
    Thank you for your help.
    Jennifer Tran

    If you're on ECC 5.0 or higher - check this blog out
    <a href="/people/saujanya.gn/blog/2006/12/19/how-to-get-work-items-your-outlook-inbox:///people/saujanya.gn/blog/2006/12/19/how-to-get-work-items-your-outlook-inbox
    If you're on something lower than ECC 5.0 -
    Search SDN for notes on RSWUWFML2 - that's a SAP program that you could use to send workitem to outlook email inbox.
    Hopes this help.
    Jennifer Tran
    Message was edited by:
            Jennifer Tran

  • SCSM R2 Duplicate Email Notifications

    Hello anyone! I recently installed SCSM R2 on Windows Server 2012 R2 and created my Service Manager environment. I incorporated an Active Directory connector so I could notify affected users and assigned users of incident creation, assignment and resolution.
    I followed instructions based off various guides I found and created a custom management pack to store all my templates, workflows, etc. I am only deploying three custom workflows within my Incident Event Workflow Configuration. Those three workflows are as
    follows:
    1) Create Event - Incident Created - This workflows will send an email notification to the affected user that an Incident has been created.
    2) Update Event - Incident Assignment - This workflow will send an email notification to the assigned to user.
    3) Update Event - Incident Closed - This workflow will send an email notification to the affected user when the incident has been resolved. 
    I am using custom notification templates for each of the workflows and they all three are working, doing what they are intended to do except for one aggravating issue. In regards to the "Incident Assignment" workflow the "assigned to"
    user is receiving two emails (exact replicas) notifying that the ticket has been assigned to them. My notification list within the "Incident Event Workflow Configuration" properties for the Incident Assignment workflow is as follows:
    Under Notification List:
    User - Assigned to User , Message Template - Incident Assignment Email Notification. This is the only notification added to the notification list. I do not understand why it is sending two emails to the "Assigned to User". If anyone is experiencing
    a similar issue or can help please do. Thanks!

    Thank you Andreas! This MP did fix my issue. To anyone out there that needs to know the steps taken after downloading the MP please see below. 
    1) Go to the link listed by Andreas Baumgarten above. Download the Lumagate.AssignedToNotification.xml MP. Save it to a network share you can access from your SCSM server.
    2) Navigate to the Administration tab in your SCSM console. Select Management Packs and then choose import under Management Packs in the Tasks section.
    3) Once you have imported the MP go to the Workflow Configuration section under Administration still. 
    4) Choose your desired workflow to edit (in my case, Incident Event Workflow Configuration) and click properties. 
    5) From there you can Add a new workflow and select the Lumgate MP. I was able to leave the criteria and notification list sections blank and chose "Do not apply a template" under "Select Incident Template". Make sure this workflow is
    enabled and you may need to disable your existing custom workflows if any were previously created. 
    6) Lastly, I went and customized the Notification templates from the MP to better suit my company. You can edit the HTML in the message body to fit your needs. 
    Brian Toms

  • Duplicate Email Notification

    Post Author: Selvam
    CA Forum: Publishing
    Hi,
    I have schedueld a report weekly Option(Monday to Friday) 8.00 AM with Email notification. I am getting more than 3 notification per day.  I don't know why it's happeing. I am getting this error for only Weekly schedule. I have checked the history of the report. It's having only one occurance, but we are getting more than there successful Email notification
    Please advice me.

    I've also put out a request for help.  Same issue that you are experiencing and like you I think I've tried just about everything I can think of, but no change.  Email messages are duplicated.  Quite annoying actually.

  • Receive duplicate email notifications

    I receive duplicate messages to my Apple Discussion notifications. Any way to make the duplicates stop?
    Both are to the same email address. Comparing headers shows no differences.

    Should have kept my mouth shut
    Do you have notifications enabled for this thread? For this community? If so turn it off.
    For the thread look at the top of the thread list
    For the community look at the first page

  • Duplicate email Notifications.

    Okay this notification at this particular point is a duplicate to the one I read last evening.
    http://forums.adobe.com/message/2164560#2164560
    I will edit and add other duplicates as I run across them.
    what seems to be happening is the last post read in a thread from a previous day is used as first post in a new batch of notifications the next day sometimes it further up and maybe the last to or three threads are actually new.

    Okay here is another one Hope this time I've coppied everything proper this time:
    From - Sat Aug  8 15:04:04 2009
    X-Account-Key: account2
    X-UIDL: sm_15C15A8C_45cad4a6a2f74e648825f35a48219953
    X-Mozilla-Status: 0001
    X-Mozilla-Status2: 00000000
    X-Mozilla-Keys:                                                                                
    Return-Path: <[email protected]>
    Received: from mail.sgaur.hosted.jivesoftware.com [209.46.39.252] by mail.kimbanet.com with SMTP;
       Sat, 8 Aug 2009 14:55:33 -0400
    Received: from sgaurwa42p (unknown [10.137.24.43])
         by mail.sgaur.hosted.jivesoftware.com (Postfix) with ESMTP id 52E7E24082CD
         for <*******@kimbanet.com>; Sat,  8 Aug 2009 12:55:27 -0600 (MDT)
    Date: Sat, 08 Aug 2009 12:55:26 -0600
    From: Kath-H <[email protected]>
    Reply-To: [email protected]
    To: Phillip Jones <*******@kimbanet.com>
    Message-ID: <1390869882.1206411249757727343.JavaMail.jive@sgaurwa42p>
    Subject: [Forum comments] Re: Moderation in this forum
    MIME-Version: 1.0
    Content-Type: multipart/mixed;
         boundary="----=_Part_124937_479981614.1249757726400"
    Content-Disposition: inline
    X-SilverlineSVF: SubjectLength: Subject length of 45 matches range "Between 40 & 60 chars"
    X-SilverlineSVF: Failed Tests: SubjectLength[1]
    X-SilverlineSVF: Total Weight: 1
    X-SmarterMail-Spam: SPF_None, SpamAssassin 0.2 [raw: 0.1]
    ------=_Part_124937_479981614.1249757726400
    Content-Type: text/plain; charset=UTF-8
    Content-Transfer-Encoding: quoted-printable
    Content-Disposition: inline
    Message was edited by: Jochem van Dieten to remove private informatio n

  • Notification Center Shows Duplicate Email Notifications

    I use the Apple mail app for my emails.  Under Mountain Lion, when new emails arrive, I receive a banner notification but when I look in notification center these emails appear as 2 separate notifications.
    Any advice would be appreciated.

    Ray,  I was receiving multiple notifications sent to my GMAIL IMAP account.   I noticed that when I opened the first notification I was shown mail with the "all mail" label selected.  Opening the second notification displayed the "important" lablel. 
    To resolve this issue,  I logged into the gmail web interface, opened settings, clicked on labels.  I then unchecked the "show in IMAP" box for the "all mail" label and the "important" label.
    Perhaps this will help you.

  • A workflow is sending the same email notification twice

    A workflow is sending the same email notification twice. Not every notification, but this happening only a few times randomly.  The double sent emails are arriving together , have the same date and time.
    I've checked the workflow and found that there is no double sending command in the workflow, and the workflow history also shows just 1 run and 1 email sending.
    Can somebody help me on this.

    Hi Neel,
    For troubleshooting your issue, you can take steps as below:
    1.Increasing the UserDefinedWorkflowMaximumComplexity to 30000 setting using Powershell script
    2.IISRESET
    3.Adding <httpRuntime maxRequestLength="51200" executionTimeout="3600" /> in web.config. Yes, that is "3600" unlike "300" suggested. Please note that there are multiple lines in web.config with <httpRuntime maxRequestLength="51200">.
    I made this change only in the very first one.
    4.IISRESET
    5.Removed everything from C:\Users\<userName>\AppData\Local\Microsoft\WebsiteCache from my laptop
    6.Removed everything from C:\Users\<userName>\AppData\Roaming\Microsoft\Web Server Extensions\Cache from my laptop
    7.Removed everything from C:\Users\USER\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache\ from my laptop
    8.IISRESET
    9.Restart SharePoint 2013 Designer
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/69b184bf-09ed-4e00-815a-4e40a975c4bf/prevent-sharepoint-2010-workflow-to-send-duplicate-emails?forum=sharepointcustomization
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS?

    I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS? I AM GETTING LIKE 6 DUPLICATE EMAILS FOR FACEBOOK NOTIFICATIONS. HOW CAN STOP THIS??

    Perhaps you should contact Facebook?

  • Need to stop Email Notification

    Hi All,
    I Need to stop Email Notification only from Compensation workbench, if is there any possiblility kindly guide me guys as I am stuck up due to this.
    Regards,

    Hi;
    Duplicate thread Re: Need to stop Email Notification only from Compensation workbench please post once
    Regard
    Helios

  • Email Notification Glitch || Motorola Droid 4; v.4.0.4 ICS || ongoing as of 17 January 2013

    For the past  past week or so my Droid 4 has been repeatedly and continually (non-stop!) providing "new" Email notifications when I have none whatsoever, or only one new mail. The notification I receive is that I have hundreds of new mails when either one or no new mails have delivered to my mail account (for reference, hundreds of notifications per hour). Not only that, but when I open the new mails I cannot access the contents of the mail I have received, and there are always at least three to five duplicates of each "new" mail, sometimes more.
    I have researched this issue via Google Search: Droid4, ICS and Android help communities and sites and now on this forum. I have attempted to troubleshoot to rectify the issue by disabling my Email notifications, powering down the device, powering-up again, then re-enabling my Email notifications, all to no avail. If I receive no resolution here @VerizonWireless Community, my next course of action will be to enter the same information and request for assistance w/Motorola.  
    In my research on this topic I did find the Motorola Droid 4; v.4.0.4 ICS rollout documentation, which was no help to me for this particular issue, but from which I did learn some neat things about that software version which I'd not previously known and which were helpful to me in other ways. That file is linked below as well as the attached .pdf file in hopes that it might be of help to others.
    I would most certainly appreciate any and all help and/or suggestions from anyone here at the Verizon Community.
    Thanks so much and kindest regards,
    ricemeli
    Droid 4 Update.pdf - Verizon Wireless Support
    support.verizonwireless.com/pdf/system_update/droid_4.pdf
    Cheers!

    I disabled my Email alerts and enabled gmail alerts because I couldn't stand it anymore... still hope someone here can help me, though because I very much dislike using the gmail platform on my Droid4.
    I'm uploading screenshots of examples of multiple instances showing of one actual new mail and of what I see when I open a new mail... which is nothing in the body of the mail.
    Multiple instances of some mails:
    Email body blank when opened:
    Thanks all! I appreciate any help or suggestions anyone may be able to provide.
    Kind regards,
    ricemeli

  • Receiving email notification UMS Adapter

    Hi ,
    I am using Oracle SOA Suite PS5 UMS adapter. UMS adapter is working fine while sending outbound email notifications, but the same is failing while receiving inbound email notifications, as there is no instance being created for deployed project containing UMS adapter operations type Inbound Receive Notification .
    I have checked also, there is no inbound notifications being seen in Service Engine---Human Workflow-- Notification Management.
    I have followed : http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/
    but had no luck :(
    Log Trace :
    oracle.fabric.common.FabricDeploymentException: [JCABinding] [UMSPROJ2.InboundEmailUMSService/2.0]Unable to complete initialization due to: Endpoint Activation Error.AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta****@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
    Please correct the reported issue and redeploy the BPEL process. : Endpoint Activation Error. AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
    The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta***@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
    Please correct the reported issue and redeploy the BPEL process.
    {rootCauses=[]}
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry.access$3600(AdapterServiceRevisionRegistry.java:72)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
    nRegistry.java:618)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.
    java:444)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisio
    nRegistry.java:409)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionR
    egistry.java:334)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisi
    onRegistry.java:140)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:102)
    at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevi
    sionChanged(AdapterService.java:347)
    at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.p
    rocessDefaultInSeries(FabricKernelInitializerServlet.java:824)
    at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.r
    un(FabricKernelInitializerServlet.java:773)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
    (WorkManagerExecutor.java:120)
    at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
    er.java:184)
    at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: BINDING.JCA-12517
    Endpoint Activation Error.
    AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.
    adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta***@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
    Please correct the reported issue and redeploy the BPEL process.
    at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
    pl.endpointActivation(AdapterFrameworkImpl.java:511)
    at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
    ntActivation.performEndpointActivation(JCAEndpointActivation.java:649)
    at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
    ntActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:632)
    at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
    ntActivation.performActivation(JCAEndpointActivation.java:386)
    at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
    RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
    nRegistry.java:593)
    ... 11 more
    Caused by: Unable to create Endpoint.
    at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResou
    rceAdapter.java:195)
    at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
    pl.endpointActivation(AdapterFrameworkImpl.java:492)
    ... 15 more
    <Dec 23, 2012 5:51:40 PM IST> <Error> <oracle.integration.platform> <SOA-20020>
    <Deployment of composite "UMSPROJ2" failed: [JCABinding] [UMSPROJ2.InboundEmailUMSService/2.0]Unable to complete initialization due to: Endpoint Activation Error.
    AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
    The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta**@gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to the following reason: Unable to create Endpoint.
    Please correct the reported issue and redeploy the BPEL process.: Endpoint Activation Error.
    AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
    The Resource Adapter UMS Adapter was unable to activate the endpoint oracle.tip.
    adapter.ums.inbound.UmsActivationSpec:{InboundThreadCount=1, To=abhinavgupta***gmail.com, PollingInterval=6, DeliveryType=Email, ConsumeMode=poller} due to th
    e following reason: Unable to create Endpoint.
    Please suggest !!
    Regards,
    Abhinav
    Edited by: Abhinav on Dec 28, 2012 9:52 AM

    You can use callhome
    MDS(config)# ip domain-lookup
    MDS(config)# ip name-server
    MDS(config)# snmp-server contact
    MDS(config)# callhome
    MDS(config-callhome)# email-contact <[email protected]>
    MDS(config-callhome)# phone-contact
    MDS(config-callhome)# streetaddress
    MDS(config-callhome)# enable
    MDS(config-callhome)# transport email from <[email protected]>
    MDS(config-callhome)# transport email smtp-server
    MDS(config-callhome)# no destination-profile short-txt-destination alert-group All
    MDS(config-callhome)# destination-profile short-txt-destination alert-group Syslog-group-port
    MDS(config-callhome)# destination-profile short-txt-destination email-addr <[email protected]
    MDS(config-callhome)# no duplicate-message throttle
    Regards,
    Roman

  • Receiving email notification of port state changes

    Hello
    I have a small SAN comprising 4 x MDS9509's and a Fabric Manager Server.
    The FMS is set to email fabric events, but it doesn't email on port state changes i.e. IF_DOWN_LINK_FAILURE and IF_UP. I'm assuming this is because they are not actual fabric changes.
    What is the best way for me to be able to receive email notification of these changes?
    Thanks
    Steven

    You can use callhome
    MDS(config)# ip domain-lookup
    MDS(config)# ip name-server
    MDS(config)# snmp-server contact
    MDS(config)# callhome
    MDS(config-callhome)# email-contact <[email protected]>
    MDS(config-callhome)# phone-contact
    MDS(config-callhome)# streetaddress
    MDS(config-callhome)# enable
    MDS(config-callhome)# transport email from <[email protected]>
    MDS(config-callhome)# transport email smtp-server
    MDS(config-callhome)# no destination-profile short-txt-destination alert-group All
    MDS(config-callhome)# destination-profile short-txt-destination alert-group Syslog-group-port
    MDS(config-callhome)# destination-profile short-txt-destination email-addr <[email protected]
    MDS(config-callhome)# no duplicate-message throttle
    Regards,
    Roman

  • Prevent Sharepoint 2010 workflow to send duplicate emails

    I have SharePoint 2013 as environment but am using SharePoint 2010 workflow on a list. There is a field in this list called "Order Status" which has different status such as Processing, Shipped, Cancelled, Hold. There is another list which updates
    this Order Status. I have the workflow send out an email when the Order Status changes to Processing and another email when Order Status changes to Shipped.
    The issue is that there are multiple emails being sent out when any of these status changes to either Processing or Shipped. There is no other workflow attached to this list 
    How do I prevent the workflow to send duplicate emails? I have seen that a flag could be setup to track the email sent once but that method does not work correctly and it still sends out duplicate emails. Or maybe I am not doing this correctly
    Any suggestions, comments or have anyone resolved this successfully
    Thanks Snehal H.Rana SharePoint Consultant

    Hi Snehal
    If you check the workflow history, you will probably see that every time an item is added or modified, the workflow runs twice. That’s why you’re receiving two email notifications. 
    The reason for this is timing. If your workflow is very short and the SharePoint server is very slow, the first instance of the workflow may finish well before the item is fully saved and committed to SharePoint. As the item is being processed, the workflow
    event receiver can fire again, and start another instance of the workflow.
    The solution for this problem is to add a step at the end of your workflow which will pause the workflow for a few minutes .
    Another Option is to use a Flag.For Setting up flag correctly check the following link
    http://www.mssharepointtips.com/tip.asp?id=1145
    Please 'propose
    as answer' if it helped
    you, also 'vote
    helpful' if you like this
    reply
    Amit Kotha

  • SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

    I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
    of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
    out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
    I need help to resolve this issue or at least the cause of the problem.
    Any help is greatly appreciated.

         
    Try below:
    http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
    Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly 
    2) Test the connectivity with the SMTP server.
    In order to do that follow these steps:
      Open  cmd
      telnet <SMTP server name> 25 ( We connect smtp server to the port 25)  
                     you should see a response  like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
                     Beware that different servers will come up with different settings but you will get something
                     If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or 
                     the smtp server is not responding.
      For testing response from your server
                       For testing response say ehlo to it.
                            Type :
                                        ehlo <servername>
                            output:
                                        250 <servername> Hello [IP Address]
      Now a test mail can be sent from that SharePoint server. 
                          Now we need to enter the From address of the mail.
                          Type :
                           mail from: [email protected]
                           output:
                           250 2.1.0 [email protected]….Sender OK
     It's time to enter the recepient email address.
    Type : rcpt to: [email protected]
    output:
    250 2.1.5 [email protected]
     Now we are left with the data of the email. i.e. subject and body.
    Type : data
    output:
    354 Start mail input; end with <CRLF>.<CRLF>
    Type:
    subject: this is a test mail
    Hi
    This is test mail body
    I am testing SMTP server.
    Hit Enter, then . and then Enter.
    output:
    250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
    Type: quit
    output:
    221 2.0.0 <servername> Service closing transmission channe
    3)  Check alerts are enabled for your web application
          verify if the windows timer service is running or not.
          Run this stsadm command to check that
          Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
         This should return <Property Exist="Yes" Value="yes" />
         If you don’t get this, Enable alerts by:
         stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
          If its already enabled, try turn off and turn on it back.
    4)  Check the Timer job and Properties
           Go to
           MOSS 2007:  Central Administration > Operations > Timer Job Definitions (under Global Configuration)
           In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions 
           Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
                       job-immediate-alerts
                       job-daily-alerts 
                       job-weekly-alerts
           stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
           The expected output is:
           <Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.  
           If you don’t get this, run the following command to set its value.
           stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
    5)  Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for      all.
    6)  Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones       won't be delivered unless the user has at least read
    permission.
    7)  If it is happening for one user, can also try to delete and re add the user in the site.
    8)  Most importantly , you should try this one.
          Run this SQL query to the content db < Select * from Timerlock>
          This will give you the name of the server which is locking the content database and since when.
          In order to get rid of that lock 
          Go to that server which is locking the content db and then restart the windows timer service.
          within some time it should release the lock from content db, if not then at the most stop the timer job for some time
          Once the lock will be released then try to send some alerts
          You will surely get the email alert.
    I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
    If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
    Even after this if it is not working, then you can try these few more steps too
    9)  Try re-registering the alert template:
    stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f  "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
    10)  Try to clear the configuration cache
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for