Duplicate from 9i to 10g

Hii All,
Can I duplicate the database from 9i to 10g using 10g RMAN command?
thankss in advance

hi,
No, you can not do that. RMAN 10g executable is not compatible to take RMAN backup of 9i. Moreover, RMAN DUPLICATE works only with 10g. As per Oracle Documentation, the compatibility matrix doesn't support this.
Hope it helps !
Cheers !

Similar Messages

Duplicate from ASM

Hi all,
I have had a request to do a duplicate from ASM on Solaris x86-64 (Little Endian) to a Windows 32 bit server (also Little Endian). I am thinking this would be a two step process.
1. Take a rman 'backup as copy' then restore to a Solaris x86-64 file system.
2. Then use the rman 'CONVERT DATABASE ON TARGET PLATFORM' to create the scripts to do the conversion to Windows 32-bit. Also run utlirp & utlrp to convert wordsize at the end of it.
Has anybody done this before?
Cheers
VicC

Hi,
I assume that you are using database 10g or higher. One way to achieve this is to
1. Create a database on Windows same Oracle version as on Solaris.
2. use impdp to plug the tablespaces from Solaris.
Regards,
Edited by: gjilevski1 on Aug 13, 2010 7:40 AM

Best app to remove duplicates from iTunes 2014

Hi All,
I've been trying to research the best application to sort and remove duplicates from my iTunes library. I have over 7000 songs and iTunes built in duplicate finder doesn't look at the track fingerprint, which is useful for those songs which are labelled "Track_1" etc.
Has anyone reviewed any recent products? I was looking at TuneUp, but after reading so many negative comments, I've decided not to go down that path. I would prefer a program that did most of the work for me, due to the amount of songs. Happy to pay for a good product...
I do have MusicBrainz Picard, which has done a great job of tagging, but don't remove duplicates.
Thanks in advance :-)

Tune up is a great app. When they moved from version 2 to version 3 is when it went to crap and all heck broke loose. They shut their doors but they have since re opened and went back to developing version 2. I use that version and I am pretty happy with it as being an overall cleanup utility. I also use Musicbrainz and a couple of other utilities but in the end if you have an enormous library 20k plus then you are going to have a few slip through. I would probably go with Tuneup if I were you and a thorough third party duplicate finder. Dupe Guru's music edition seems to do a pretty good job.

How to delete duplicates from iTunes but not hard drive

I'm running iTunes 10 and have my music stored on both my NAS drive and backup drive. Each track appears twice on iTunes: once as lossless for streaming and and once as compressed AAC files for synching to ipods and iphones.
For some reason, when my PC is turned on after being turned on, the linkstation cannon be 'seen' by iTunes, and therefore if I try to play a track, 'the original file cannot be found'. If I use the 'add folder to library' option in the 'file' dropdown menu, the tracks are located again.
Unfortunately, I the last time I did this it resulted in 4 copies of each song on itunes; 2 lossless and 2 AAC.
I have 2 questions:
Firstly is there an easy way to delete the duplicates from my iTunes library so that I am left with only 1 lossless and one AAC copy, but not deleing the files from my NAS and backup drive?
Is there a way I can just store my music as lossless, but convert it easily to aa more compressed format for synching to iphone and ipod?
Thanks!

You can try my new DeDupe script. It should be able to get rid of the redundant copies while keeping one copy of each track in each format. See this thread for background.
I've not used the feature, but iTunes can downsample to 128k AAC on the fly as it syncs your devices. Of course you might find the process is too slow for your needs or find that 128k is too much compression.
tt2

Oracle report from 6i to 10g

hi all,
We try to move oracle report from 6i to 10g. however we found that the report's record ordering is different.
The case is that, the record in report is ordered according to the attribute "break order".
There is no "order by" in sql".
It runs without problems in 6i, but in 10g , the ordering of the record has no ordering.
Please help to solve the problems or give some advice. Thanks.

Break order property only works for ordering in break groups. For other groups (like the lowest level group) you have to use order by in your SQL.
That was also the case in 6i, so you may just have been lucky that it worked at all.
This is from the Help:
The Break Order property is the order in which to display the column's values. This property applies only to columns that identify distinct values of user-created groups (i.e., break groups ). The order of column values in a default group is determined by the ORDER BY clause of the query for SQL queries

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Reports upgradation from 6i to 10g

Hi!
We are upgrading all our reports and forms from 6i to 10g.
I am facing the following problem.
In our 6i report, we were scheduling a report from the report server (frequency every hour).
Here the output pdf file we are storing in a folder on the server.
We are assigning the full pathname and file name to the Desname in the After Parameter form Report trigger.
Desname := directory path||filename.pdf
This command works in 6i. The output pdf file is generated in the respective folder. But however this command is not working in the 10g server.
If we dont assign the path and file name to the Desname parameter then the o/p file is generated. It is going to the default location.
Can anybody help me in solving this problem? Is there any other method to achieve the same result?

Is there anybody who can help me on this? I need help urgently in this matter.

Report upgraded from 6i to 10g not displaying data.

Hi,
I upgraded one report from 6i to 10g,
When I'm running the report for the same set of data.
After changing the layout for few fields in the subframe.
first time it has shown the data in the report output but now same report with same data is not displying the output.
I'm sure this is due to some layout problem.(may be due to upgradation from 6i to 10g)
Please guide me to resolve this problem.

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

Stored procedures not working after migrating from 8i to 10g

The Oracle stored procedures are generating an error following upgrading a ColdFusion web application from Oracle8i to 10g release 2.
"Error","jrpp-102","05/28/08","13:35:09","insite","Error Executing Database Query.[Macromedia][Oracle JDBC Driver][Oracle]ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'S_DEFAULT_LETTER_SETTING' ORA-06550: line 1, column 7: PL/SQL: Statement ignored The specific sequence of files included or processed is: new_letter.cfm, line: 63 "
I've been looking at this for about 3 days with a colleague in the office. We can resolve this be recreating the stored procedure with a new name (e.g. adding the suffix "_v2"). Its not really practical for us to do this throughout the system. Anyone know what the root cause might be?
I'm currently connecting to Oracle10g using SQLTools and Oracle8 client. I've yet to upgrade to Oracle10 client.
I've tried selecting all the stored procedures and re-compiling them but it appeared to make no difference.

The Oracle stored procedures are generating an error following upgrading a ColdFusion web application from Oracle8i to 10g release 2.
"Error","jrpp-102","05/28/08","13:35:09","insite","Error Executing Database Query.[Macromedia][Oracle JDBC Driver][Oracle]ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'S_DEFAULT_LETTER_SETTING' ORA-06550: line 1, column 7: PL/SQL: Statement ignored The specific sequence of files included or processed is: new_letter.cfm, line: 63 "
I've been looking at this for about 3 days with a colleague in the office. We can resolve this be recreating the stored procedure with a new name (e.g. adding the suffix "_v2"). Its not really practical for us to do this throughout the system. Anyone know what the root cause might be?
I'm currently connecting to Oracle10g using SQLTools and Oracle8 client. I've yet to upgrade to Oracle10 client.
I've tried selecting all the stored procedures and re-compiling them but it appeared to make no difference.

Problem in migrating from 6i to 10g and I need help

I'm trying to change my program from 6i to 10g
I migrated libraries and
every thing is ok but when I try to migrate forms I had this error
ERROR opening D:\10gnkinkos\SHIFTS.fmb :oracle.forms.jdapi.JdapiException: A subclassed module could not be found during loading
Check subclass and library dependencies

With "the browser opening a white page" do you mean that the Forms Java applet won't start at all or is it starting with a Forms with a white canvas without any items on it?
If it is the first (Java not starting) there must be something wrong with your Forms setup. First try to run with the default setup without specifying a form. It should display test.fmx that it is included with the Forms setup. This Forms just tells you the setup succeeded and displays a single OK button

Deleting Duplicates from a table

Its a huge table with 52 fields and 30k rows. I need to delete the duplicates based on one of the fields. GROUP BY is taking a lot of time. Is there a quicker way to delete the duplicates using SQL.
Thanks.

How many duplicates have you got? Do you have even a vague idea? 1%? 20%? 90%?
One way would be to add a unique constraint on the column in question. This will fail, of course, but you can use the EXCEPTIONS INTO clause to find all the ROWIDs which have duplicate values. You can then choose to delete those rows using a variant on teh query already posted. You may need to run %ORACLE_HOME%\rdbms\admin\utlexcptn.sql to build the EXCEPTIONS table first.
This may seem like some unnecessary work, but the most effective way of deleting duplicates from a table is to have relational integrity constraints in place which prevent you having duplicates in the first place. To paraphrase Tim Gorman, you can't get faster than zero work!
Cheers, APC

Urgent: Calling Reports from Oracle Forms 10g (10.1.2.0.2) fails

Problem displaying a report from within Oracle 10g forms.
After a lot of work, we are able to access and actually display a report directly from Internet explorer and view the report from the report server as well.
The successful url was:
http://york.vrc.virginia.gov:7778/reports/rwservlet
?report=/u01/app/oracle/produ ct/vrcmidtier/reports/vrc/pmw41051.rdf
&userid=vrcpr/vrcpr@vrctest&destype=cache&desformat=HTML
The form displays correctly back to the screen
When executing from within the form, however, the report runs but does not display back to the screen.
Forms Steps so far:
created a report object called pmw41050
static parameters are:
file name: /u01/app/oracle/product/vrcmidtier/reports/vrc/pmw41051.rdfination format
execution mode: batch
communication mode: synchronous
destination name; null
destination format: HTML
reportserver:: vrc_york_midtier
Built a when button pressed trigger as follows:
declare
l_report_file varchar2(200);
l_report_id REPORT_OBJECT;
l_report_status varchar2(200);
begin
-- capture the report
l_report_file := 'pmw41051';
l_report_id := find_report_object(l_report_file);
-- set the parameters for this output
set_report_object_property(l_report_id, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property(l_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(l_report_id, REPORT_DESTYPE, CACHE);
set_report_object_property(l_report_id, REPORT_DESFORMAT, 'PDF');
set_report_object_property(l_report_id, REPORT_SERVER, 'rep_york_vrcmidtier');
set_report_object_property(l_report_id, REPORT_OTHER, 'PARAMFORM=NO');
set_report_object_property(l_report_id, REPORT_DESNAME, 'DESNAME');
-- and run the report
l_report_status := run_report_object(l_report_id);
-- monitor progress
while l_report_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
l_report_status := report_object_status(l_report_status);
end loop;
message('back from the report'); -- test message for return
end;
The report executes without error (as indicated by the message on the last line) but does NOT display back to the screen
checking the rwservlet/showjobs verifies the report completed and the reportcan be displayed from there.
So, bottom line: how to make a 10g form call report and display it on the screen?

Thanks MIke for your feedback...
Will this surfice?
Procedure Test_Report Is
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

Steps to upgrade from 9i to 10g

How to upgrade from 9i to 10g?
i dont have any idea

Choose an Upgrade Method
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/migprep.htm#1006935
10g Upgrade Companion: Doc ID: Note:466181.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3420297705404971166::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,466181.1,1,1,1,helvetica
Adith

Duplicate from 9i to 10g

Similar Messages

Maybe you are looking for