Duplicate Idocs in SAP

Hi Everyone,
I'm hoping at least one of you have had this issue and know of a fix. We received a batch of 111 850's (PO's) in our ftp In Folder and then XI created 111 855's to send back to the customer in our ftp Out Folder. In SAP I have 222 idocs from this batch! I can tell the batch duplicated 1 for 1 each order. This happens every once in a while and makes our order folks crazy because they have to Delete all the dupe orders that get in. Does anyone have a direction for me or an answer to this problem. Please let me know if I need to provide some info here.
Thanks!
Eddie
PS we are running the Seeburger Adapter incase that helps.

Hey
>>BUT!! SXMB_MONI shows 636!!! So in XI we see the 106 orders X 6 - Any Ideas???
are the messages coming from outside your landscape?
if yes,then its possible that the sender system send the message 6 times.
its possible that that they send the message to XI and they might have not got the acknowledgment for it so they send it again n again n again.
Thanx
Aamir

Similar Messages

Duplicate Idocs - XI - SAP

Hi Experts,
In our scenario Idocs are coming in SAP from XI which generates Measuring Document.
Now, Here Duplicate Idocs are getting generated carrying the same data where in one of the Idocs generates a Measuring document and other gives an Error Measuring document already exists.
We would like to find out how the Duplicate Idocs are getting generated.
Can anyone through some light on this kind of issues.??
Thank You
Deepak

Hi,
Now today also i found two Idocs, one has created the measuring document XYZ and the other is lying in 52 status-Duplicate Measuring Document Found. Document - XYZ.
Now, we checked in XI system we couldnt able to find both these Idocs, dont know how these are getting generated in SAP or by any chance if they are coming from XI ??
Also, can we have a report from SAP system showing Measuring Document generated against the IDOC number???
Can anyone guide about this ??
regards
DM
Edited by: Deepak M on Jun 30, 2010 2:40 PM

How to stop the duplicate idoc processing ? whar need to done SAP R/3

Hi All
If the Same Idoc is processed to SAP R/3 then what to do for not processing
the duplicate IDOC ?
Or some thing like this...
If by mistake same idoc processed then how to avoid to process the idoc?
what i need to in SAP R/3 side?
Regards
Kiran lvs

Hi
some thing like this:Using T.code: we19 ...Idoc processed a day ago
                                       today by using the same t.code we19 ..processed the
                                       same idoc, what i sent a day ago.
                                       Here how to stop this duplicate processing ?
I hope this is clear...else pl put a note
regards
Kiran lvs

Duplicate IDOCS

Hello all,
I am having a peculiar problem here. I have a program which reads all debi change documents and creates debmas idocs for the changed customers. Then we will run rseout00 program to process those debmas idocs. These 2 programs are scheduled as 2 separate background jobs in SAP. The problem is in the job log for these jobs, it says 22 communication idocs are created and 22 idocs are selected and processed, but when I go to we05 and check the idocs, there are 44 idocs. 2 idocs are getting published for each customer. What could be the problem? Please suggest.
Thanks,

Hi Somen,
Please check your distribution model (BD64) perhaps you have more than one receiver systems were defined/setup for message type DEBMAS.
If not, please check the partner receiver (WE02) for duplicate IDocs.
Are they the same?
Regards,
Ferry Lianto

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

Error while pushing idocs from SAP to XI

Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jain

hi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

Error when sending INVOICE01 iDoc to SAP R/3 system

Hi,
I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set". Could someone help me how to resolve this error?
Thanks,
Trifire

SLG1 or IDOC in idoc status WEDI

Unable to send an idoc from SAP R/3 to XI

Hi,
We are trying to send Z_CREMAS_SUSMM.CREMAS03 idoc from R/3 system to XI using IDOC adapter.
We have done the following steps.
On SAP R/3 system:
1.created a RFc Destination which points to the XI system using transaction SM59
2.created a port in which we have selected this RFC Destination using tansaction WE21
3.logical system for R/3 with transacion BD54
4.In WE20 transaction,we have configured the PartnerProfile by adding the IDOC message type to the outbound Parameters of XI Logical system.
On XI Sytem:
1.Created RFC destination
2.Created a Port
3.Loaded metadata
While trying to Post IDOc from SAP R/3,it is throwing an error"External segment name E2LFA1M001 cannot be interpreted"
and "Basic type CREMAS03 does not exist" on XI side.
Can anyone please provide a solution to this?

HI Jagruthi,
Have you loaded the metadata into the XI system by using IDX2?
If it is done then try to delete once and do once again.
And also delete the IDoc from IR and reimport the IDoc and activate it once again.
Regards
Goli Sridhar

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

IDoc from SAP R/3 to SAP XI

Hi All,
I am passing an IDoc to SAP XI. I have had to amend a bespoke segment on the IDoc. I have imported the new strucutre into XI. When I send an IDoc to XI the payload is not showing the new fields, even though they are populated correctly.
Any ideas??
Thanks
Martin

Hi Martin,
delete the IDoc meta data in XI transaction IDX2 and try it again.
Regards,
udo

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Problem in Outbound IDOC from SAP R/3

Hi,
I am working on to send an IDOC from SAP R/3 to XI.
I configured all necessary things as follows:
1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
My problem is I am not able to see any message in SM58 of XI server.
Could anyone help me out?
Thanks In Advance.
Yaseen.

Yasseen,
you hardly see the idocs in Xi in sm58. Try sxmb_moni.
If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
Hope it hellps,
helge

Problem when pushing IDOC from SAP to XI

Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Duplicate Idocs in SAP

Similar Messages

Maybe you are looking for