Duplicate IP 0.0.0.0 Conflict on 802.1X Windows 7 Clients

Hi,
Ever since we implemented ISE 1.x with 802.1X authentication about two years ago, a number of our Windows 7 user stations occassionally report the well known error message: "duplicate ip 0.0.0.0" . Only wired stations are affected and it happens randomly but not frequently. On further investigation I found that the conflicting device mac address in every case is in fact the bia of the switch port that the Windows 7 PC client is connected. The characteristics of each case is consistent with the Cisco device tracking process as detailed in TAC Document ID: 116529, Updated: Oct 09, 2013
     http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/8021x/116529-problemsolution-product-00.html
We have Cisco C6500 access switches with IOS Ver: 12.2(33)SXJ1.The output of "Show ip device track all" command on the switches:
 access-switch#sh ip device track all
 IP Device Tracking = Enabled
 IP Device Tracking Probe Count = 3
 IP Device Tracking Probe Interval = 30
I found that Cisco recommends three Solution options as follows:
 1. ip device tracking probe delay 10
 2. ip device tracking probe use-svi
 3. ip device tracking probe interval <seconds>
However, the ios only shows track probe "count" and "interval" for change. There is no option to change the probe delay or use-svi in this IOS.
What is your advice?
Many thanks.
Sankung

You may have a look at this document if you have not seen it yet. It goes over device tracking a little more in detail and possible workarounds.
http://tekdigest.blogspot.com/2013/11/windows-7-with-address-conflict-for-ip.html
HTH
luke

Similar Messages

  • IP address conflict on Windows 7 clients after change 3560 to 3650

    Hi,
    after a switch change 3560 to 3650 some Windows 7 clients show a popup with the message "IP address conflict". Because of using manual DHCP (MAC reserve an IP address) i would exclude the possibilitiy of using an duplicate IP address. After search i found this document:
    http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/8021x/116529-problemsolution-product-00.html
    I tried the command 
    ip device tracking probe delay 10
    on the 3650 sw. Till now there are no messages with duplicate IP addresses on clients which connected to 3650 sw.
    But on on 3560 sw th command does not exist. Anybody who has a similar problem or an idea to solve the problem on the 3560 sw.
    The command "sh ip device tracking all" on 3560 shows that ip device tracking is disabled.
    Thx for any help.

    IOS version 12.2.(46) SE
    the suggested command does not exist.
    btw the ip address conflict popup appears on clients which are connect to the 3560 too.
    any other ideas?

  • How can I resolve conflict between itunes and Windows 8.1

    When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer.  It is fine on other devices such as ipad and Windows phone.  I can also pick up emails on online on the same laptop.  There appears to be a conflict between itunes and Windows 8.1

    Please see  Boot Camp for comments.

  • Conflict Resolver Pop-up Window Won't Go Away

    Since recent update of Snow Leopard, I have been unable to resolve between 8 and 10 (the count changes) calendar conflicts between iCal and Entourage 2008. The notifications are apparently generated by MobileMe though I do not subscribe to the service.
    Entourage groups my sync services as calendar/Mobile Me and contacts/Mobile Me and there does not appear to be an obvious way to unlink the two. Nor can I access any preferences in MobileMe without ostensibly signing up for an account. And I am stuck with pushing data from Entourage to iCal and address book so I can sync my iPhone.
    No matter how many times I go through the exercise of "resolving conflicts and re-syncing" via the pop-up, the window reappears on top of any program in current use. Even "x-ing" out the window is only a max 5 min fix before the window reappears. I was using the same settings in Entourage prior to the new OS 10 update so I think this is just a VERY annoying bug. Advice please? Apple, please fix asap!!

    I am having the exact same problem. I just, finally, installed SL today, and updated everything, including the 800+ mg security update to SL. I use Entourage and an iPhone. Prior to this installation I had no trouble syncing my Entourage cal with my iPhone cal (via iCal, of course, but I never use it separately). I got a Sync Conflict box with about 12 errors. There had been some odd changes in the times of the events, but as they had all occurred in the past I didn't care that much. I went through choosing the best version (sometimes between just Entourage and iCal, sometimes with the iPhone tossed in the mix), thinking it was done. But I've been repeatedly asked to review the same events more than four times in the past half an hour. It would appear that this is a bug of some kind. As I'm new to SL I don't know if it is from the update or the original disk, but I'd like it to go away. Please help.

  • Duplicate entries in Add-Ons list? (Firefox 17 on Windows 8)

    I'm not sure why, but I seem to have duplicate entries in the Firefox Add-Ons list.
    They are:
    Intel Identity Protection Technology 2.1.42.0
    Intel Identity Protection Technology 2.1.42.0
    NVIDIA 3D Vision 7.17.13.529
    NVIDIA 3D Vision 7.17.13.529
    Software: FF Version 17.0.1 on Windows 8 (Windows Updates are current).
    Hardware: Dell XPS 8500 Desktop, Intel® Core™ i7-3770 3.4 GHz with 1 GB NVIDIA GeForce GT 620 Graphics

    I was having another issue where I could not see anything in the list of Extensions, although I knew there were many.
    I unlinked this device from sync and did a reset, then re-synced.
    Things seem to be working now.

  • Copy / Duplicate a CD works for the MacOS but not for Windows

    Hi all,
    i burnt some jpg's on a CD with my Mac (drag & drop within
    the Finder). This went fine: i can read the CD on my Mac
    and on my Windows-PC.
    As i need y couple of copies from this CD, i thougth that
    the "drag & drop" thing within the Finder is to much effort
    and i created an image of the CD with the DiskUtility.
    After that i burnt the image on new, empty CDs. All of them
    worked fine on my Mac, but non of them were readable on
    any Windows-PC.
    So i started a workaround with the "burning-folder". That
    works, but it is a little bit uncomfartable in comparison
    to working with images.
    Sadly i found no way to create an burn an image which works
    on Windows-PCs.
    Is there no way to copy / duplicate CD, that are readable
    on Windows-PCs?
    Thanks a lot, Stefan

    Hm, i testet something and i do not know, why two different things come out:
    1) i began to create an image from the CD, which i created at first, which works
    on my Mac and on my Windows-System.
    So i could choose the following formats: read-only, compressed, read/write, DVD-/CD-Master.
    2) if i create an image from an existing folder from my harddisk, i have the same options
    PLUS "hybrid-image". If i choose this format and burn it, the CD works on my Windows-System, too.
    So the question is, why the hybrid-image only available for images which are created
    from hardisk-folders and not from an CD?!

  • Getting a smaller duplicate of my firefox page everytime I open a new window and I have to close it out, nothing is working and even ran a virus scan- getting f

    Geez, have to go to 10 different things to even get here!!!! I am having a problem with getting a smaller version of firefox every time I open a new window but it is blank, it looks like your web page, I have to close it out to view my page I was opening. I ran a virus scan and there is nothing. I have windows and firefox is my home page, btw when I go to IE I do not have this problem, Seems like when firefox installs a new version something happens,.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Conflicts between Itunes and Windows Vista Home Premium Edition

    I am looking to purchase a new pc with Windows Vista. What are some possible problems I could have with Itunes?

    I have a new Windows Vista Home premium laptop and am NOT able to use the latest version of iTunes. Hopefully by the time you get your new computer, Apple will have taken the time to fix the garbage program that they are passing off as the latest version of iTunes.

  • Flash Video Encoder conflict with Safari for Windows

    I installed Safari for Windows (AMD/Windows XP) without the
    options (no Bonjour) and found that it disabled Adobe Flash Video
    Encoder (tries to reinstall, can't find msi, can't reinstall from
    disk, 1 keeps asking for disk 1). Uninstalled Quicktime, didn't
    help. Uninstalled Safari, rebooted, still can't get Flash Encoder
    working.

    timtro;
    Many (myself included)won't be installing safari/win until
    the final
    release, and I suspect Adobe won't test much until then
    either, so it's
    probably best to report this to apple as a possible bug with
    their
    beta. -Tom Unger

  • Itunes or quicktime conflicting with my os-windows xp

    Everytime I have installed my itunes, i find when I turn off my computer and restart, my cd/dvd drive D: is not recognised. From what I can understand, the computer loads the driver for the D: Drive, but seems not to be able to find the hardware. I have had to do a complete reinstallation to original settings to get the cd/dvd drive back and operational. The problem only began when i installed itubes.

    hi tj!
    Everytime I have installed my itunes, i find when I turn off my computer and restart, my cd/dvd drive D: is not recognised. From what I can understand, the computer loads the driver for the D: Drive, but seems not to be able to find the hardware.
    a couple of preliminary questions before we proceed.
    is that a Packard Bell that you're installing itunes on? (the vast bulk of disappearing optical drive reports that we get are for Packard Bells.) if you don't have a Packard Bell, could you let us know what make and model of PC you have?
    when you go into your Device Manager (right-click "My Computer", select "Manage", click "Device Manager", are you seeing a code 41 error message next to your optical drives? or is it some other error message code?
    love, b

  • Conflict with WRT160N and Windows Wireless Network Connection

    I have a WRT160N router connected to a Verizon FIOS cable modem with five computers (all Windows based) wirelessly connected to the N router.  Four of the computers auto detect the N router connection when the computer starts up using Windows Wireless Network Connection and operate well.  One of the computers, which is the only one running Easylink for router configuration, will not connect through the Wireless Network Connection.  I have to use Easylink to manually connect.  The WNC gives a msg that Windows cannot configure this wireless connection and to configure the wireless connection using Wireless Zero Configuration service.  When I configure WZC correctly the WNC sees all available networks and allows me to select the Advanced Wireless checkbox to allow Windows to connect to the wireless network.  However, when I reboot the computer none of the configuration parameters are saved and I am back to manually connecting using Easylink and going through the entire process again.   Any suggestions?    Thx  

    Uninstall the EasyLink and connect manually. I think EasyLink 3.0 or later is coming soon ..
    For information on upgrading the firmware on the linksys routers :
    http://linksysfirmwares.googlepages.com/upgradingfirmware
    For information on wireless security :
    http://linksysfirmwares.googlepages.com/wirelesssecurity
    C | EH
    linksyshelp.blogspot.com

  • Conflict: My OS is Windows 2000 Pro. and I have a 3rd gen. ipod nano.

    I know that I need to have either Windows XP or Vista to run itunes 7.6, but I was wondering if there is an older version of itunes that I could download and if it would work for my ipod.

    There is an older version of iTunes that will work with Windows 2000 but it's below the required specification for the latest Nano:
    iTunes 7.3.2 for Windows 2000
    iPod: Minimum System Requirements

  • Conflict between flash player &windows 8.1

    I downloaded windows 8.1.  When trying to play videos, I always receive the message to update adobe flash player.  When I try to update response is that it is already part of windows 8.1.  How can I fix this?

    Flash Player for Windows 8 and 8.1 IS embedded by Microsoft. It updates through Windows Update ONLY.
    A lot of websites have trouble recognizing IE11(part of Win 8.1) and the Plugins in it. The recommneded workaround is to enable Compatibility View for those websites until Microsoft releases an update to fix it: http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

  • Intel Management Engine Info conflict on T530 with Windows 7

    I have updated Intel Management Engine Firmware to version 8.1.20.1336 a few months back. Now looking at the info by running MEInfoWin.exe from Command Prompt, I get this:
    BIOS Version:_______xxxxxxWW (x.xx )
    MEBx Version:_______8.0.0.0066
    Gbe Version:________1.3
    VendorID:__________8086
    PCH Version:_______4
    FW Version:________8.1.20.1336
    UNS Version:_______8.0.3.1427
    LMS Version:_______8.0.3.1427
    MEI Driver Version:___8.0.0.1262
    According to the readme file, the UNS, LMS and MEI Driver versions should all be higher (e.g. 8.1.20). How do I update these last 3 versions?

    usually i go for the newer version.
    and on my thinkpad i installed power management driver version 1.66
    and for ime firmware the second link you provided.
    good luck

  • ISE/802.1x - IP Conflict at 0.0.0.0?

    Has anyone seen this issue?
    We have Windows 7 clients running 802.1x that will pop up a message in the eventlog that there is an IP conflict with 0.0.0.0. This seems to cause an infinite loop of DHCP NACK and BAD_ADDRESS in the scope.
    I am on code 1.1.1.268.
    Thanks in advance.
    -Ryan

    Hello i have the same issue only on a windows7 computer (all other computers are windows7 WindowsXP and are working fine)
    switches : 3750-X in version 15.0.1.SE2
    dot1x activated on switches, not on computer
    sometimes, a duplicate message IP 0.0.0.0 appear on the W7 computer, and it is not able to commmunicate after that, even it has a FIXED ip
    This is not a real duplicate Ip, the MAC AMC that has taken the IP 0.0.0.0 is a4:4c:11:44:xx:xx (seems to be a cisco switch ....)
    I have found at : http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_1_se/command/reference/cli1.html#wp9596478
    that
    The ARP probe default source IP address is the Layer 3 interface and 0.0.0.0 for switchports.
    Since i have no IP for the user vlan on the 3750-x switch where ip device tracking is done, i assume this 0.0.0.0 Ip is viewed because of ARP probe requests sent by the switch ....
    But we don't have the ip device tracking probe delay parameter on 3750 switches ... only seen on 4500
    If anyone can confirm that ...
    Perhaps adding an IP in the user vlan could be a workaround as it won't use 0.0.0.0 IP for arp probes ?
    Ce message a été modifié par: Guillaume BARBEROT

Maybe you are looking for