Duplicate IP alerts

Hi all,
We're receving duplicate IP address warnings which we believe are to do with teamed NICs on servers. A few minutes later we get a resolved message:
Duplicate IP on host ON100-K9 (192.168.xxx.xxx) at 2012-08-19 22:57:20 +0100 - IP 192.168.yyy.yyy detected on (MAC Address1 MAC Address2)
Duplicate IP on host ON100-K9 (192.168.xxx.xxx) at 2012-08-20 16:20:59 +0100 - No duplicate IPs detected
Is there any way of configuring the Onplus device to recognise teamed NICs or to ignore them?
Regards,

Hi Chris,
This is a known deficiency in OnPlus duplicate IP monitoring, OnPlus does not currently support the announcement of the same IP address across multiple hardware interfaces. You are very likely correct that you are seeing this issue because you have a server/device that has multiple NICs bonding via ALB/LACP or other NIC teaming strategy.
Until the OnPlus product team adds a feature to OnPlus to allow for multiple 'devices' to be aggregated into the same device, I'm afraid that the only alternative is to drill into the ON100 device and to disable the Duplicate IP monitor for the time being on this network.
-mike

Similar Messages

Duplicate Invoices alert

Hi All,
I have a requirement for report development for Invoice processing purpose.Let say in one month i have total invoice processed in SAP 1000.out of it 25 invoices are duplicate.means it has already processed by unknowingly.
I want to display in report as that 25 invoices should be highlighted.
Criterias for Dupliacte invoices
Vendor Code,Invoice Reference Number,Invoice date,Invoice amount and PO number should be same
1 invoices is duplicate for one vendor(means 2 invoice invoice are posted through upeer criteria)
same for another invice also with different vendor.
So i need to display in alert position in report all invoices which are duplicate invoice for different different vendor .
Thanks in advance

It is highly unusual that a same Invoice number is used again unless you have a recurring number range.. Moreover you could have teh same reference info and company code and create a new document... The Invoice # is not the same and hence would let it go. the check is performed on the accounting documents first not the accounting document # and then the LIV document
check this note for further clarification
LINK: [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=305201]

Duplicate ItemCode Alert On AR Invoice

Hi All,
I am looking for an alert that will find duplicate ItemCodes on a single invoice.
Once the invoice is posted it must alert a user that the specific invoice contains duplicate ItemCodes.
Any help will be appreciated.
Regards,
Quinn

Hi Rahul,
Thanks for the reply.
I have a SP already but they want me to take it off.
They want to let the Invoice go through and only be alerted to the event.
Regards,
Quinn

Duplicate iMessage Alerts With 4S

Hello,
I'm using an IP4S and have a small annoyance. When I receive a text message the phone alerts me correctly. As soon as I pick up the phone and enter my unlock PIN I get a second alert for the same message. I have my message notifications set to never repeat. Any way to stop this, so it only alerts me once and doesn't repeat the alert when I unlock the phone?
Thanks!

No one is doing anything wrong. Apple can fix this. Notice that you always get the text message first. Here's what's happening to millions of people:
- Your friend's iPhone is on the default setting, to "Send as SMS when iMessage is unavailable."
- Your friend sends a message from a place where data service (3G, etc.) is spotty, or has cut out for a second, and there is no wi-fi. This triggers iMessage to send the message via SMS, which basically goes through the voice channel of the cellular network, which almost always works. Therefore, you receive the text message.
- Shortly afterward, many times within seconds, your friend regains data service (back on 3G or wifi or whatever) and their phone automatically sends the message again via iMessage.
- You receive a duplicate message.
Solution? On the receiving end, if two messages from the same person contain the same exact text and are received within a minute of each other, iMessage shouldn't show the second one. I'm open to other ideas, but I for one would be happy if my phone did exactly this.

Duplicate calendar alerts

Whenever I create an event in calendar on my iphone running iOS 8.1 it seems to create duplicate alerts in calendar on my MacBook Air running Yosemite. This is driving me bonkers. Anyone having this problem too? How to sort it?

I solved my double alerts problem by deleting my old gmail calendar. I had imported the calendar into Apple Calendar and then disabled the gmail calendar by unchecking the box next to it in Apple Calendar so the events did not show up on the calendar, but the alerts were still appearing. After I deleted the calendar the alerts stopped so now I only get an alert from the imported event in Apple Calendar.
Gmail and mac mail don't play well together! There is a good discussion here and Steve's Fix worked for me, particularly stopping mac mail from saving drafts to the server.
https://discussions.apple.com/thread/5468664?start=15&tstart=0#thread-message-23 500944

Sender FTP MVS file duplicate Handling

Hello,
I am facing the following challenge in one of my current development. I know it is an age old issue but Would greatly appreciate
some new inputs/views into this.
The following is the scenario.
1. PI 7.3 Sender File adapter (FTP) reads the file from the mainframe (MVS)
2. The MVS dataset is like
     TEST.MVS.DATA.C001D00
     TEST.MVS.DATA.C002D00
     TEST.MVS.DATA.C003D00 ....
3. For a specific reason the MVS file is not allowed to be deleted/archived, were as the new file will be keep on adding (004, 005, 006 ....)
3.1 Handled this using "ftp. ignoreSourceFileDeletion " -- true
4. Now the challenge in SAP PI is "how to READ the NEW files ONLY, ignoring/skipping the old files"
4.1 The file size is big enough to avoid reading all files and filter/delete using Mapping/Script
5. I have used the default "Duplicate Handling" option available in the File Sender adapter, but
        5.1 the problem is, the channel throws the duplicate error after processing the first file (DATA.C001D00)
            but dose not move on to process the next file (since the first file is still available on the FTP, as mentioned in step 3).
        5.2 For every poll interval it throws the duplicate error/message (in CC monitor) for the first file again n again.
        5.3 Duplicate handling config :- Duplicate Message Alert Threshold = 0
Pls let me know if you have had a similar scenario and how to handle it.
Adapter module would be a last resort :-)
Thanks in advance
Prasanna

Hi Hareesh
Thanks for the reply. The mainframe dosent allow the file permission to be changed!!
We have figured out to use an abap program (bg scheduled job) which will do the ftp pull and also maintains the filename, timestand and size in an custom table. So every time it will check the table entries and will get the latest files only.
Marking it as answered!!
Regards
Prasanna

Duplicate message handling in the sender file adapter

Hi,
I enabled duplicate file handling check in the sender file adapter so that whenever there is a duplicate file it should send me an alert also it should disable the channel so that i do not get that duplicate file alert message again and again.
My question is will it activate the channel again as soon as a new file arrives or do i need to manually do that.
Michal's PI tips: Duplicate handling in file adapter - 7.31

Hi Hema,
You will have to activate the channel manually. The idea behind the 'disable' functionality is to avoid further file processing through that channel which can only start once the channel is activated again manually.
Regards,
Abhishek

Duplicate handling Not Working

Hi PI EXperts,
I need your help here.
I am using the option of Duplicate handling in sender FTP channel as below:
Enabled Duplicate handling: Yes, Duplicate message alert threshold:0.
But I found few duplicate files are processed and archived twice?
These files have same name(with extension) , are of same size and last modified time stamp is also same.
Please let me know how I can resolve this issue so duplicate files are not processed more than once ?
Regards,
SV

Hi PI experts, I have checked the message logs. I have noticed that duplicate files are being processed again. As per my understanding, PI does not have sufficient rights to delete the (duplicate) files; it can only pick, process and archive them. Due to this, a duplicate file stays for 24 hours in the FTP folder and the duplicate check gets expired the moment the file remains there for 24 hours. Due to this, PI treats this duplicate file as a new file and reprocesses it. Please let me know if my understanding is correct or there could be some other reason for this? If my understanding is correct, I believe one option to resolve the issue is as below Option 1: Modify file properties so that PI has sufficient rights to delete duplicate files. Please let me know your thoughts. Regards, SV

How to send one mail if multiple updates happend using alert

Hi all,
I have one requirement.i had created one alert on a table.
It will fire only for update of the table.but i am getting mails on each update.
If 10 records updated then i am getting 10 mails.Is there any way to get one mail to show all the updated records in one mail.
reply me if anybody known.It would be helpfull to me.
Thanks,
Kumar.

Hi Kumar,
936453 wrote:
Hi all,
I have one requirement.i had created one alert on a table.
It will fire only for update of the table.but i am getting mails on each update.
If 10 records updated then i am getting 10 mails.Is there any way to get one mail to show all the updated records in one mail.Please see old threads which can help you on this
https://forums.oracle.com/forums/search.jspa?threadID=&q=Periodic+AND+Alert+AND+Multiple&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Duplicate+AND+Alert&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
;) AppsMasti ;)
Sharing is Caring

Suppressing rows in the next mail alert (EBS)

Hi All,
I am working on an alert and looking to suppress those rows from appearing in the alert which were processed in the last alert.
i.e. Everytime the alert runs, it should NOT pickup the rows shown in the last alert.
I know there is a flag called ''suppress duplicates'' in alert sets page, however it doesnt seem to be working.
(I am not sure how to use this)
Can anyone help please.
Thanks in advance.
-Nil
Edited by: nimTree Consulting on Jun 10, 2009 11:01 AM

Hi,
I know there is a flag called ''suppress duplicates'' in alert sets page, however it doesnt seem to be working.
(I am not sure how to use this)This feature would work for a detail action (not for a summary action).
Note: 1056367.6 - Alert Sends Multiple Messages for Single Action w/ Suppress duplicate Enabled
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1056367.6
Can anyone help please.Review the following document and see if it helps.
Note: 76318.1 - How to suppress Duplicate Values in Reports
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=76318.1
Regards,
Hussein

LMS 4.2.2 DFM still not possible to disable Duplicate IP false positives?

I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!

I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!

Duplicate IP detected

ONplus keeps on detecting an IP conflict which I can't seem to pinpoint :
Duplicate IP on host ON100-K9 (192.168.2.27) at 2012-10-31 15:55:10 -0400 - IP 192.168.1.101 detected on (24:AB:81:2C:57:38 F0:CB:A1:17:E4:F7)
I currently use 3 IP ranges all trunked on Ethernet 0/1.
192.168.10.x IP Phones
192.168.2.x Data Lan
192.168.20.x Guest Vlan
192.168.1.x is the management IP range on the ASA5510. This IP range is configured on the management interface of the ASA and ther eare no devices connected to that port. A show interface on the ASA confirms Management0/0 "management" is down and line protocol is down. What could be causing that?

Hi Anthony,
I'm not sure as to what could be triggering the the Duplicate IP alert in your case. I will look into this with the team and get back to you.
Thanks,
The OnPlus Team

Same system being shown multiple time in Solution for Early Watch Report

Hi Gurus ,
I have some satellite system configured to Solution Manager . Today I can see the same system entry multiple time in the
Operations: Solution Monitoring -> Early Watch Alert.
eg .,
I have a system whose SID is ABC , i can see the ABC entry for todays date (i.e., 4 FEB 08) nearly 4 time .And this systems are not rescheduled for the next EWR (i.e scheduled for 11 FEB 08- since we have kept a period of 7 days )
Please suggest
Anthony

Hi Anthony,
There was an error, that EWA sessions for one systems were scheduled multiple times per week.
Please check [SAP Note 1083108 - Duplicate EarlyWatch Alerts|http://service.sap.com/sap/support/notes/1083108]
Search for SAP Notes with key words: EWA, multiple, duplicate.
Application area: SV-SMG-OP
What's the software configuration of your SolMan?
Best regards,
Ruediger

Prometric history to pearson......help

hi!
My name is Muhammad Usman
i gave my Oracle Database 10g: Administration I OCA paper on 7th sep 2009
i successfully passed the paper and they gave me two numbers which were printed on my score report generated by prometric
Prometric Testing
ID:SRxxxxxxx
Confirmation
Number
S0BSYDxxxx
Now problem is that i want to give my SQL paper in order to complete OCA certification at pearson.
how my record will be move to pearson.
i have registered my self to pearson.While i was registering they ask my testing id and i gave Prometric Testing
ID:SRxxxxxxx.
now how can i check my certifications at oracle i.e what certification i did.
please help me.....its written on prometric site that your registeration will get expirre on 28th aug 2010 so than i will not be able to access on prometric . i have to complete my all this registeration before 28th on pearson.
i just want that pearson and oracle should have my record.
please help......

** Duplicate Post Alert .... see {thread:id=1118049}.

PI 7.0 SP15 alerts JMS Duplicate message error

Hi all,
We have a scenario where in we receive BAPI calls to R/3 from web through MQ and XI.
WEB -> MQ->XI->R/3 (Request / Response send back similarly)
We have modular configuration in the channel.
All these BAPI messages are queries needed to build an order for example product information / customer information etc.
We have PI 7.0 SP15
Sometimes we receive the error ' Duplicate JMS message with JMS ID##### detected.Duplicate will be ignored' in the sender JMS channel.Because of this error XI is not able to process subsequent messages and the channel keeps on throwing the same error.We need to clear the queue and then restart the channel to make it work.
Can any one please tell me what is the reason for occurence of this error..?
Is this ID generated in JMS or in XI?If so how this could be handled without clearing the queue's..?
When we analyzed the messages in the queue we found out same xml messages been send twice which i would imagine the query been send twice(which is a possiblity from the web) would that have caused this JMS duplcate message error??!!
Also because of this error XI is throwing multiple alert messages at the rate of 3 per second which is causing the huge performance hit as the alert inbox gets filled up..We did put the suppress multiple alert check..but before somebody reacts to these alerts there are numerous of them created..any suggestions on this is much appreciated..
Thanks for your help in advance
Larry

Larry,
Is that alert rule is generic or interface specific? If it is generic then please make it interface specific.
Thanks,
Sunil

Duplicate IP alerts

Similar Messages

Maybe you are looking for