Duplicate lines in worklist CAT2

Hi,
I would be very grateful if some one can help me with a CAT2 issue.
I am working in ECC 6.0 , I Iexecute CAT2 ( perfil CAT classic) for a personnel number and I can see in a worklist WBS in which I can enter hours, when I enter hours for this WBS in the Data Entry Area two lines appears in Worklist for the same WBS one with information that was in working ara at first and another one with the information enter un Data Entry Area.
Does anyone knows the reason of this ?
Thanks in advance for your help.
Sara

Hello,
Thank all very much for your help.
My problem is solved, I have copied rows from worklist to Data entry area, if I filled hour this way lines are not duplicated.
My question now is --> Is there anyway to information is showed in worklist and in data entry area in order to I don't need copy rows from one place to another ¿?
Thanks again for your help!!!
Sara

Similar Messages

New error message :duplicate line item

Hi,
We have to add a new error message so that when we try to add a duplicate line item in our qty contract
1. we should not be allowed
2. we should get a error message u201Cduplicate line item not allowedu2019
How to achieve this
Thanks
Arun

Search this forum for "USEREXIT_SAVE_DOCUMENT" and "USEREXIT_SAVE_PREPARE".

Duplicate line item in Statement of account

Dear All,
Why there is duplicate line item in Statement of account?

Hi Ajit,
In your ECC system follow below path and set Availability check rule to "B" (full delivery).
SPRO --> SD --> Basic Functions --> Availability Check and TOR --> Availability Check --> Availability Check with ATP Logic or Against Planning --> Define Default Settings
Select your sales area and set Availability check rule to "B" (full delivery).
This should fulfill your requirement.
Rgds
Sourabh

Activate function "Duplicate Line" in a UDO - SAP 8.8

He everybody,
I've created a basic UDO in SAP 8.8... How can I activate "Duplicate Line" function in this UDO, like exist in SAP B1 default forms??
It is possible??
Rgrds,
Wagner

Hi Wagner,
you have to develop this function on your own. You can use the generalservices for accessing udo data. see the sdk help center for more information.
greetings
matthias

Activate funcions "Duplicate Line" in UDO-Table

He everybody,
I've created a basic UDO... How can I activate "Duplicate Line" function in this UDO, like exist in SAP B1 default forms??
It is possible??
Rgrds,
Wagner

Hi Wagner,
Your question belongs to SDK forum. Post it there.
Thanks,
Gordon

Delete duplicate lines

hi, i have duplicate lines, how to keep one line and delete other line, please see the data.
GEOMETRY(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
-87.913022, 41.977339, -87.912718, 41.977415))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
-87.913022, 41.977339, -87.912718, 41.977415))
many thanks

Hi 908275,
Here's a quick demo:jot_test@11gR2> create table duplicate_demo (
2     id number primary key,
3     geometry sdo_geometry);
Table created.
jot_test@11gR2>
jot_test@11gR2> delete from user_sdo_geom_metadata where table_name = 'DUPLICATE_DEMO';
1 row deleted.
jot_test@11gR2> insert into user_sdo_geom_metadata (table_name, column_name, diminfo, srid) values
2 ('DUPLICATE_DEMO','GEOMETRY',sdo_dim_array(sdo_dim_element('x', 600000, 650000, .01), sdo_dim_element('y', 300000, 350000, .01)), 81989);
1 row created.
jot_test@11gR2>
jot_test@11gR2> create index duplicate_demo_spind on duplicate_demo(geometry) indextype is mdsys.spatial_index;
Index created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (1,
2 sdo_geometry(2003, 81989, null, sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(600000, 300000, 601000, 300000, 601000, 301000, 600000, 301000,600000, 300000)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (2,
2 sdo_geometry(2003, 81989, null, sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(600000, 300000, 601000, 300000, 601000, 301000, 600000, 301000,600000, 300000)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (3,
2 sdo_geometry(2003, 81989, null, sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(600000, 300000, 601000, 300000, 601000, 301000, 600000, 301000,600000, 300000)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (4,
2 sdo_geometry(2003, 81989, null,sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(600200, 300200, 601500, 300200, 601500, 303000, 600200, 303000,600200, 300200)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (5,
2 sdo_geometry(2003, 81989, null,sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(600200, 300200, 601500, 300200, 601500, 303000, 600200, 303000,600200, 300200)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (6,
2 sdo_geometry(2003, 81989, null,sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(600200, 300200, 601500, 300200, 601500, 303000, 600200, 303000,600200, 300200)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (7,
2 sdo_geometry(2003,81989,null, sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(601706,301321, 602554,301321, 601744,302032, 602612,302028, 601790,301429, 601706,301321)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> insert into duplicate_demo (id, geometry) values (8,
2 sdo_geometry(2003,81989,null, sdo_elem_info_array(1,1003,1),
3 sdo_ordinate_array(601706,301321, 602554,301321, 601744,302032, 602612,302028, 601790,301429, 601706,301321)));
1 row created.
jot_test@11gR2>
jot_test@11gR2> commit;
Commit complete.
jot_test@11gR2>
jot_test@11gR2> -- Identify which rows duplicate each other
jot_test@11gR2> select /*+ ORDERED */ b.id, a.id
2 from duplicate_demo a, duplicate_demo b
3 where sdo_equal (a.geometry, b.geometry) = 'TRUE'
4 and a.id != b.id
5 order by 1,2;
        ID         ID
         1          2
         1          3
         2          1
         2          3
         3          1
         3          2
         4          5
         4          6
         5          4
         5          6
         6          4
         6          5
         7          8
         8          7
14 rows selected.
jot_test@11gR2>
jot_test@11gR2> -- Now delete the duplicates
jot_test@11gR2> delete from duplicate_demo a where rowid > (
2     select /*+ ORDERED */ min(rowid)
3     from duplicate_demo b
4     where sdo_equal (b.geometry, a.geometry) = 'TRUE');
5 rows deleted.Regards
John

Display of resource in worklist- CAT2

Dear all,
I am facing an issue related to worklist in cat2. I am assigning person at activity level and genrating worklist via cats configuration. Every thing seems fine, but suddenly i saw that there is some problem related to display of line item in worklist. I am not able to understand on what basis system is showing line items in worklist. I check dates but certainly it not based on start and finish dates of activity because some time i can see the activity which is going to start after 2 week but i can see in work list while other activity is not displayed. I checked total available capacity also in work center but seems like that is also not behind the calculation.
Kindly help me to know this calculation. Thanks a lot.
Regards
Abhishek

Dear All,
Did any body face the same problem. Just not able to get how system is calculating the base to pop up the line item in worklist in cat2 screen.
Regards
Abhishek

Duplicate line in Global variable

Hi Experts,
I have one BODS job which will load the data from BW to Non SAP. As per my business requirement I have to trigger this job from BW Process chain. For that I have added BODS job in Process Chain Variant and given input to global variable before execute the PC, it was working fine. Now I want to change the Global parameter value for that I open the PC variant it was showing multiple line items and I am not able to run this from Process Chain. Please help me if anybody faces this issue.
Version: BW 7.3
BODS Version : 4.1 SP2
Regards
M Ramesh

Hi All,
When you use the process type "Start job in SAP BusinessObjects Data Services" in a process chain , in the variant maintenance there are duplicate entries created in the global variables. This is due to a Internal Program error.
Apply note 1989821 ( Duplicate entries in Global variables for BOBJDS job in process chain)
Regards
M Ramesh

Duplicate line added with a different billing plan in FPLTC TABLE

Hi,
when i save a order number then only 1 entry for billing plan is there in the FPLTC table.
but when i save the INVOICE there a duplicate entry is added with different bIlling plan in the FPLTC table.
can somebody tell me why this is happening.
Is there some configuration which happens at the time of saving the INVOICE. that it updates the previous BILLING PLAN NUMBER with the new NUMBER.
Should there be 2 billing Plan numbers actually??

I dont think there is a way to use 2 different Billing plans for the same line item without doing an enhancement. If I were you I would address this like a training issue rather than doing such a huge enhancement.

Query help op duplicate lines

Hi Experts,
I have a client who needs a Report that show the Item availability and what Sales Order makes up the 'Committed Stock' and what Purchase Orders make up the 'Ordered Stock' quantity in the Item Master Inventory tab.
Here is what I did so far:
SELECT T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[IsCommited], T0.[OnOrder], T0.[OnHand] - T0.[IsCommited] + T0.[OnOrder] AS 'Available', T1.[DocEntry] AS 'SALES ORDER', T2.[CardCode] AS 'Customer Code', T2.[CardName] AS 'Customer Name', T1.[Quantity]AS 'SO Qty',T4.[DocNum] AS 'PURCHASE ORDER', T4.[CardCode] AS 'Vendor Code', T4.[CardName] AS 'Vendor Name',T3.[Quantity] AS 'PO Qty' FROM [dbo].[OITM] T0 INNER JOIN [dbo].[RDR1] T1 ON T0.ItemCode = T1.ItemCode INNER JOIN [dbo].[ORDR] T2 ON T1.DocEntry = T2.DocEntry INNER JOIN [dbo].[POR1] T3 ON T0.ItemCode = T3.ItemCode INNER JOIN [dbo].[OPOR] T4 ON T3.DocEntry = T4.DocEntry WHERE T0.[ItemCode] = 'A00008'
The issue here is that when I have more Sales Orders than Purchase Orders it just fills in the lines with duplicate Purchase Orders.
Any help would be appreciated.
Thanks,
Marli

Hi Marli,
If you need detail break down, you have to separate the results to two queries. There are no relations between those SO and PO. You could not get them in one report without issue.
Thanks,
Gordon

I get unwanted duplicate lines when editing the data content of my JTable

I have created an editable JTable (filled with data from an SQL) with a modified instance of AbstractDataModel.
I have a phenomenon that I cannot explain nor fix: each time I edit a data field in the JTable and press ENTER or leave the field, the edited line is duplicated. The extra content is not sent to my SQL (if I recreate the table everything is fine, except that certainly the changed value is lost). The problem must come from the Java code.
Ok, I admit, that I am not a Java pro and might have made a really stupid error, but I cannot find it.
Has someone already seen such a behavior?
Thanks
CCH
Message was edited by:
CCHuser

Now we are drifting away a little from Java and start getting into philosophy ... :-) But one last reply I will do:
I agree that just playing around with the fuse box is dangerous and brings no benefit. But I am not that unknowing in Java... Technically saying I work in IT, but just not as a programmer but rather as a business consultant (I write the functional concepts that later the programmers have to implement and then I have to talk to them to fix functional errors and do the testing). Besides, I hold an official Java Programmer degree. But when not programming professionally and continuously gaining experience, it is very hard to keep your skill up. Therefore I do one or another hobby project with Java that I could also do better and faster with other tools such as Excel, Access or a simple batch job.
My concept for trying new things is to get a piece of code from the internet from which I assume I know roughly what it does. Then I use it in my programs, and while altering it to my needs, I continuously keep searching in API, documentation and tutorials or simple trial and error to get better insight into the details.
And as a scientist you know what I mean when I say that if I try something new, I simply accept for certain details that they work without knowing how. And over time I then take the time for the "how". Many famous people made their inventions by trial and error and while then testing their new observation and changing the surrounding conditions found out why they work. Not that I would claim for myself to be anything close to a genius inventor but I found that the approach works for me to advance in my insights of a solution.
Sincerely CCH
Message was edited by:
CCHuser

How do I find duplicate lines in Oracle Spatial?

Hi,
I am looking at all of the Oracle locator/spatial functions and I am wondering how to I find if two lines, or two polygons are the same? That is a user has partially loaded more lines into the database and the data had previously been loaded. I do not want to rely on any attribute names preferring to only compare GEOM data.
thanks,
Susan

hi
i think u can use this procedure to compare all geometry
DECLARE
v_id number;
CURSOR cur1 is select * from Layer;
CURSOR cur2(v_id number,v_geom mdsys.sdo_geometry) is select * from layer a
where SDO_GEOM.RELATE(a.geom,'EQUAL',v_geom,0.005) = 'EQUAL' and v_id <> GID;
------------------------------ define your LAYER (LINES) ----------------------------
row1 LAYER%rowtype;
row2 LAYER%rowtype;
BEGIN
open cur1;
loop
fetch cur1 into row1;
exit when cur1%NOTFOUND;
open cur2(row1.GID,row1.geom) ;
loop
fetch cur2 into row2;
exit when cur2%notfound;
select row2.id from dual;
-- or insert into ......
end loop;
close cur2;
end loop;
close cur1;
end;
-------------------------------GOOD LUCK ---------------------------------------------
--Author Geomaticien @09

Duplicate line items

Hello,
We are in SRM 5.0 with server 550 with ECS.
We have faced a issued in a PO where all the line items have duplicated again.
1   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   1   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   2   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   2   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   3   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   3   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   4   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   4   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   5   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
   5   Material Other Consulting G903520 903520 3 each 73,00 GBP Per 1 73,00 GBP 30.09.2009 Expenses 6686400 C Finance
Total Val.: 2.628,00 GBP Tax Value: 394,20 GBP
any clue why it has happened, we were not able to replicate this scenario in quality systems.
Rgds,
Madhan

You could try searching OSS, however I think this is just a program error.
Debug the used badis to see why this is happening.
Kind regards, Rob Dielemans

Duplicate line added with a different billing plan

Hi,
when i save a order number then only 1 entry for billing plan is there in the FPLTC table.
but when i save the INVOICE there a duplicate entry is added with different bIlling plan in the FPLTC table.
can somebody tell me why this is happening.
Is there some configuration which happens at the time of saving the INVOICE. that it updates the previous BILLING PLAN NUMBER with the new NUMBER.
Should there be 2 billing Plan numbers actually??

Yes, we had tried that, and just to be sure I just re-tried it myself, changing the sales office at the header level of Sales order, but still nothing has changed against the Invoice. What we did not want to do was cancel all the documents back to the sales order and then re-create. We have about 500 document/items to be changed, so that would take simply ages.
Are we up a creek without a paddle do you think?.
Jas.

Duplicate lines in logs

Some of my logs seem to be logging events 5 times. Logs affected include syslog, errors.log, daemon.log and possibly others.
This is an example from auth.log with the private bits cut out.
Nov 28 19:14:01 **SERVER** sshd[3952]: Postponed publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2 [preauth]
Nov 28 19:14:01 **SERVER** sshd[3952]: Postponed publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2 [preauth]
Nov 28 19:14:01 **SERVER** sshd[3952]: Postponed publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2 [preauth]
Nov 28 19:14:01 **SERVER** sshd[3952]: Postponed publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2 [preauth]
Nov 28 19:14:01 **SERVER** sshd[3952]: Postponed publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2 [preauth]
Nov 28 19:14:33 **SERVER** sshd[3952]: Found matching RSA key: **FINGERPRINT**
Nov 28 19:14:33 **SERVER** sshd[3952]: Found matching RSA key: **FINGERPRINT**
Nov 28 19:14:33 **SERVER** sshd[3952]: Found matching RSA key: **FINGERPRINT**
Nov 28 19:14:33 **SERVER** sshd[3952]: Found matching RSA key: **FINGERPRINT**
Nov 28 19:14:33 **SERVER** sshd[3952]: Found matching RSA key: **FINGERPRINT**
Nov 28 19:14:33 **SERVER** sshd[3952]: Accepted publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2
Nov 28 19:14:33 **SERVER** sshd[3952]: Accepted publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2
Nov 28 19:14:33 **SERVER** sshd[3952]: Accepted publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2
Nov 28 19:14:33 **SERVER** sshd[3952]: Accepted publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2
Nov 28 19:14:33 **SERVER** sshd[3952]: Accepted publickey for **USER** from xxx.xxx.xxx.xxx port 3006 ssh2

Hi Rambabu,
These duplicate reocrds are visible in PSA itself, it is in the direct output output of 2LIS_03_BF.
However, keys of DSO are 0DOC_NUM, 0DOC_DATE, 0DOC_ITEM, 0BWCOUNTER, 0PROCESSKEY. I have one to one mapping between DSO to PSA.
Issue is not it DSO data, issue is in PSA data itself. Hope I am clearly clarifying the my question.
Thanks,
Tanveer

Duplicate lines in worklist CAT2

Similar Messages

Maybe you are looking for