Duplicate messages in sender mail adapter

Hi,
We are using the sender mail adapter to retrieve messages from an IMAP mail server. Messages are being picked up correctly, but when we have large messages (with e.g. PDF attachments) things go wrong.
The time it takes to retrieve the mail message is longer than the poll time. In this case the adapter logs in again in the mail server to retrieve the first new message from the inbox. However the first adapter threat is already retrieving that message. This results in a duplicate message in XI. (messages are set to be deleted when read).
We have tried all kind of settings in the adapter but without any results. The adapter works fine with very small messages.
Does anyone recognize this problem? 
PS. please do not post links to sap help or the mail adapter FAQ. Useful answers will be rewarded.
Thanks,
Christiaan Schaake

Hi Christiaan !
I understand your problem. Could you set your IMAP account to avoid multiple simultaneous sessions?? maybe if there is only one session allowed per user or per time, then parallel XI threads will not be able to start downloading the messages.
If you cannot use a longer poll interval, then you could develop an adapter module for the Mail sender adapter that could be used to verify if the current mail is just being downloaded by other thread. This adapter module could check the unique mail data (date/time + subject + etc.) against a local table.
Regards,
Matias.
PD: please award points if helpful.
Message was edited by:
        Matias Denker

Similar Messages

  • Working with XI Message and Sender Mail Adapter

    Hello
    I have a task - To use one email address for several interfaces. In this case I think XI Message is the choice.
    The question is How to tie payload and SOAP header?
    Do I need to pass SOAP Header as mail message body and payload as mail attachent?

    hi,
    >>>>I have a task - To use one email address for several interfaces. In this case I think XI Message is the choice.
    you can store the address anywhere
    (in XI table, in R3 table)
    and just get if from the mapping (via lookup)
    and then put it in the adapter specific identifirers
    (THeaderTO field)
    then mail adapter will use it
    Regards,
    michal

  • Sender Mail Adapter Error: exception caught during processing mail message;

    HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
    Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
    Following are the details provoding in sender mail adapter:
    URL: provided url in the format: pop://<server name>
    Authentication method: plain
    provided user credinetions to access mails.
    poll interval - 1min
    content encoding none.
    processing parameters : quality of service-exactly once
    Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
    Verified for unread mails in the mail box and made sure that there are few unread mails.
    Also, created data types and other components in IR and completed mapping.
    But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
    please let me know what needs to be done to resolve this error.
    Thanks.

    HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
    I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

  • Sender mail adapter : no messages and no error log

    Hello,
    I have configured a sender mail adapter to read mails from the inbox. I have used IMAP protocol. URL is specified as imap://EMHBSEXM01/Inbox. User name and password is also specified properly. I have kept poll interval to 1 minute. Messages in the inbox are in unread status. But the mail is not getting processed. I do not see anything after 1 minute. I tried using generate fetch report flag. But even then it does not create any message in SXMB_MONI. I checked runtime workbench for Mail adapter but I do not see any message for the same. Is there something that I am missing?
    Thanks,
    Dev

    Hi All,
    I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
    exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
    Does anyone have any idea what this error is?
    Thanks in advance,
    Devendra

  • Sender Mail Adapter

    Hi,
      I am working on Sender Mail Adapter. I have done the total configuration but unable to sucess the scenarios. In the CC monitoring, it is saying that "Not Intialised" Even though i send and receive the messages from My Lotus Notes Inbox. I activated all the objects.
    I have done the following examples:
    Transport Protocal: POP3
    Message Protocal: XIALL
    Given the URL and UserId and PWD also
    Poll Intevel: 1 (Mins)
    Adapter Status: Active
    Please help to me solve this problem. I already raised the one more thread today but didn't get solutions.
    <b>Note: Do i need to do any setting from the Lotus notes(Mail Server) to diver my messages.</b>
    Thanks in Advance,
    <b>I found the problem with SMTP Address. Can i use the SMTP Url for POP3 or IMP4 protocal. Is there any thing else because if i use the Same SMTP Address, it is giving exception</b>
    Best Regards,
    Vijay
    Message was edited by:
            Gangisetty Vijaya Bhaskarudu
    Message was edited by:
            Gangisetty Vijaya Bhaskarudu

    Hi Gangisetty,
        SMTP is the out going server(for sending mails out) while POP3 is the in coming(receiving mails) server. So for a sender channel, you need to use the POP server details not SMTP.
    cheers
    danus

  • Sender Mail Adapter - forcing content as an attachement

    Hi all,
    We are using the Sender Mail Adapter to pull emails from the inboxes of some users of an exchange server.  We use the Mail Package option.
    We have noticed that the content of the emails are by-default added as attachments when there are no real attachments to the emails.  However the content is not added as an attachment when one or more attachments are present in these emails.
    Is there a way of forcing the Sender Mail Adapter to always add the content as an attachment and keeping the other attachments as well?  and of course maintain the Mail Package message type as the main payload...?
    Many thanks,
    Aldo

    Hi Stefan,
    Thanks for your reply.  I am glad to hear that I am wrong again )
    In your opinion is it possible to force the Outlook Exchange server to add the content attachment every time?  I mean by doing some configuration on it...?
    The reason why we would like to do this is because when - in the content tag of a Mail Package message - we have MIME message parts that are of content-type text/html we are having problems in decoding the html back to a readable format.
    To do this we use the apache QuotedPrintableCodec Java class.
    This works fine when the content type of the message is just text/plain but we get an exception when we try with text/html.
    The exception we get is:
    org.apache.commons.codec.DecoderException: Invalid URL encoding: not a valid digit (radix 16): 13
    I don't know if this is because of the two character sets we have in the payload (utf-8 and iso-8859-1) or if it is for other reasons...
    If you could help me figure out how to forward any HTML email to another system in a readable format it would be great.
    Thanks for your support,
    Aldo

  • Sender Mail Adapter Configuration - Process Multiple Attachments

    Dear sirs,
    I need to process several attachments at the same mail message as individual payloads.
    In default configuration of sender mail adapter only the body of message is used as payload.
    So I added PayloadSwapBean Module at Processing Sequence and it processed the attachment I set in Module Configuration.  I'm not able to process all attachments available, just one attachment is sent to PI pipeline.
    How can I process all attachments of a single mail message?
    Thank you in advance.
    Fabio Purcino

    Hi Jose,
    We are trying to implement reading multiple attachment in sender mail adapter. 
    Our Requirement is : Reading a mail having multiple .xls files. This should be read and converted to payload .
    package multiswap;
    //import com.sap.aii.adapter.xi.ms.XIMessage;
    import com.sap.aii.af.lib.mp.module.*;
    import com.sap.aii.af.lib.trace.Trace;
    import com.sap.aii.af.sdk.xi.mo.Message;
    import com.sap.aii.af.sdk.xi.mo.MessageContext;
    import com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageOperator;
    import com.sap.aii.af.sdk.xi.mo.xmb.XMBPayload;
    import com.sap.aii.af.sdk.xi.util.PayloadType;
    import com.sap.aii.af.service.auditlog.Audit;
    import com.sap.aii.af.service.cpa.*;
    import com.sap.engine.interfaces.messaging.api.MessageDirection;
    import com.sap.engine.interfaces.messaging.api.MessageKey;
    import com.sap.engine.interfaces.messaging.api.Payload;
    import com.sap.engine.interfaces.messaging.api.auditlog.AuditLogStatus;
    import java.util.Hashtable;
    import java.util.Iterator;
    import java.util.Locale;
    import javax.ejb.*;
    public class MultiSwapRead
        implements SessionBean, Module
        private static final String VERSION_ID = "$Id: //tc/xpi.af/NW731EXT_07_REL/src/_af_application_ejb_module/ejbm/api/com/sap" +
    "/aii/af/app/modules/PayloadSwapBean.java#1 $"
        private static final Trace TRACE = new Trace("$Id: //tc/xpi.af/NW731EXT_07_REL/src/_af_application_ejb_module/ejbm/api/com/sap" +
    "/aii/af/app/modules/PayloadSwapBean.java#1 $"
        private static final String SIGNATURE_PROCESS = "process(ModuleContext , ModuleData)";
        protected Hashtable cachedChannels;
        protected SessionContext myContext;
        public MultiSwapRead()
            cachedChannels = new Hashtable();
        public void ejbRemove()
        public void ejbActivate()
        public void ejbPassivate()
        public void setSessionContext(SessionContext context)
            myContext = context;
        public void ejbCreate()
            throws CreateException
        public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
            throws ModuleException
            if(TRACE.beLogged(200))
                TRACE.entering("process(ModuleContext , ModuleData)", new Object[] {
                    moduleContext, inputModuleData
            ModuleData outputModuleData;
            Iterator itr;
            outputModuleData = inputModuleData;
            String chid = moduleContext.getChannelID();
            TRACE.infoT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, (new StringBuilder()).append("performing payload swap for channel ").append(chid).toString());
            LookupManager lman = LookupManager.getInstance();
            Channel chan = null;
      try {
      chan = (Channel)LookupManager.getInstance().getCPAObject(CPAObjectType.CHANNEL, chid);
      } catch (CPAObjectNotFoundException e1) {
      // TODO Auto-generated catch block
      e1.printStackTrace();
      } catch (CPAException e1) {
      // TODO Auto-generated catch block
      e1.printStackTrace();
            Direction direction = chan.getDirection();
            String swapkey = moduleContext.getContextData("swap.keyName");
            String keyvalue = moduleContext.getContextData("swap.keyValue");
            Object obj = inputModuleData.getPrincipalData();
            Object pivotedObj = inputModuleData.getSupplementalData("mp.pivoted");
            boolean pivoted = pivotedObj == null || !(pivotedObj instanceof Boolean) ? false : ((Boolean)pivotedObj).booleanValue();
            Message mo = null;
            if(obj instanceof com.sap.engine.interfaces.messaging.api.Message)
                mo = (Message)((com.sap.engine.interfaces.messaging.api.Message)obj);
            } else
            if(obj instanceof MessageContext)
                mo = ((MessageContext)obj).getMessage();
            } else
                TRACE.warningT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, "no message found");
            if(mo != null && XMBMessageOperator.numberOfPayloads(mo) > 0)
               // String midstr = XMBMessageOperator.getMessageId(mo).toString();
                MessageKey auditkey = new MessageKey(((com.sap.engine.interfaces.messaging.api.Message) mo).getMessageId(), com.sap.engine.interfaces.messaging.api.MessageDirection.INBOUND);
                itr = (Iterator) mo.getAttachments();
                if(swapkey != null && keyvalue != null)
                    StringBuffer textSwappingbyBuf = new StringBuffer();
                    textSwappingbyBuf.append("Swap: swapping by '").append(swapkey).append("' ? '").append(keyvalue).append("'");
                    String textSwappingby = textSwappingbyBuf.toString();
                    TRACE.infoT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, textSwappingby);
                    Audit.addAuditLogEntry(auditkey, AuditLogStatus.SUCCESS, textSwappingby);
                   while (itr.hasNext()){
                    boolean swappedp = swapPayloads(mo, swapkey, keyvalue);
                    String swappedStatus = swappedp ? "Swap: successfully swapped" : "Swap: no matching payload found";
                    Audit.addAuditLogEntry(auditkey, AuditLogStatus.SUCCESS, swappedStatus);
                } else
                    StringBuffer textInvalidBuf = new StringBuffer();
                    textInvalidBuf.append("Swap: parameter missing ");
                    if(swapkey == null)
                        textInvalidBuf.append("swap.keyName");
                    if(swapkey == null && keyvalue == null)
                        textInvalidBuf.append(" and ");
                    if(keyvalue == null)
                        textInvalidBuf.append("swap.keyValue");
                    String textInvalid = textInvalidBuf.toString();
                    TRACE.warningT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, textInvalid);
                    Audit.addAuditLogEntry(auditkey, AuditLogStatus.WARNING, textInvalid);
            } else
                String messageEmpty = "Swap: message is empty or has no payload";
                TRACE.infoT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, messageEmpty);
            return outputModuleData;
        private static boolean swapPayloads(Message mo, String swapkey, String keyvalue)
            swapkey = swapkey.toUpperCase(Locale.ENGLISH);
            keyvalue = keyvalue.toUpperCase(Locale.ENGLISH);
            int ifound = -1;
            for(int i = 0; i < XMBMessageOperator.numberOfPayloads(mo); i++)
                XMBPayload pldi = XMBMessageOperator.getPayload(mo, i);
                String pldivalue = null;
                if(swapkey.equals("PAYLOAD-DESCRIPTION"))
                    pldivalue = pldi.getPayloadDescription();
                } else
                if(swapkey.equals("PAYLOAD-NAME"))
                    pldivalue = pldi.getPayloadName();
                } else
                    pldivalue = pldi.getContentAttribute(swapkey);
                if(pldivalue == null)
                    continue;
                pldivalue = pldivalue.toUpperCase(Locale.ENGLISH);
                if(pldivalue.indexOf(keyvalue) < 0)
                    continue;
                ifound = i;
                break;
            if(ifound >= 0)
                XMBPayload pldfound = XMBMessageOperator.getPayload(mo, ifound);
                if(pldfound.getPayloadType() != PayloadType.APPLICATION)
                    XMBPayload pldapp = XMBMessageOperator.getApplicationPayload(mo);
                    if(pldapp == null)
                        pldfound.setPayloadType(PayloadType.APPLICATION);
                    } else
                        pldapp.setPayloadType(PayloadType.APPLICATION_ATTACHMENT);
                        pldfound.setPayloadType(PayloadType.APPLICATION);
                    TRACE.infoT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, "successfully swapped");
                return true;
            } else
                TRACE.warningT("process(ModuleContext , ModuleData)", ModuleCategories.SAP_MODULE_ROOT, "no matching found");
                return false;
    We couldn't go further. Please have a look in highlighted code.
    Regards,
    Kesava.

  • Sender Mail adapter encounters MalformedInputException

    I have a sender mail adapter that processes the attached .csv file.  All is working fine.  I use FCC in module to convert the attachment and pass to an IDOC adapter for processing in SAP system.
    My problem is sometimes the sender mail CC fails with ...........
    exception caught during processing mail message[1]; com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
    It only fails with some files.  At the moment when we test we FORWARD the email to our email account.  If I detach the failed email attachment and attach it to a NEW email it will then work.
    So why does it not work when forwarding emails?  But it works when I attach the same file to a new email and send?
    Other threads for this error seem to point to encoding.  But how do I know which to use.  I currently use the following in my module config:
    Transfer.ContentType     application/octet-stream;charset="ISO-8859-1"

    I have this in my configuration:
    localejbs/AF_Modules/PayloadSwapBean   on local
    TRANSFORM
    localejbs/AF_Modules/MessageTransformBean   on local
    txtxml
    TRANSFORM   swap.keyName   payload-name
    TRANSFORM   swap.keyValue   MailAttachment-1
    txtxml   Transfer.ContentType   application/octet-stream;charset="ISO-8859-1"
    txtxml   Transform.Class   com.sap.aii.messaging.adapter.Conversion
    txtxml   Transform.ContentDescription   MailAttachment-1
    txtxml   Transform.ContentDisposition   attachment;filename="MailAttachment-1.bin"
    txtxml   xml.conversionType   SimplePlain2XML
    txtxml   xml.documentName   MT_BCD_INVOICES
    txtxml   xml.documentNamespace   urn://federalmogul.com/BCDTRAVEL/FINGLOBCD001/00
    txtxml   xml.fieldNames   COST_CENTRE,EMPLOYEE_ID,PRODUCT_GROUP,COMP_CODE,BCD_ACCOUNT,INVOICE_DATE,TRAVELER_NAME,TRAVELER_FIRST_NAME,INVOICE_NO,AMOUNT_EXCL_VAT,CURRENCY1,AMOUNT_VAT,CURRENCY2,AMOUNT_DOC_CURRENCY,CURRENCY3
    txtxml   xml.fieldSeparator   ;
    txtxml   xml.lastFieldsOptional   YES
    txtxml   xml.processFieldNames  fromConfiguration
    txtxml   xml.structureTitle   RECORDSET

  • Sender "Mail" adapter - CSV file attachment

    Hi there
    I'm looking for some help in configuring a sender mail adapter that receives ".csv" files. I did read some blogs that mention using the "PayloadSwapBean" module to read the mail attachment instead of the mail content. My problem is to now convert the ".csv" file into a message. Is there a module that I can use ( is it the "MessageTransfomBean" ) and how. Any help would be appreciated.
    Thanks
    Salil

    Hi Salil,
    If you want to send a mail with a body and attachments, the message sender HAS to provide an XI message with attachments. I doubt a CSV file does justice.
    As Renjith said you need to convert CSV to XmL.
    A short description about the Standard Modules:
    MessageTransformationBean is a standard module used to apply the XSLT mapping to the adapter module by using <i>Transform.class</i> ( This xslt mapping is done to create a mail package, Dont confuse with the actual mapping in your case this is NOT for converting csv to xml).
    Also this module can be used to change the name and type of payloads by using <i>Transform.contentType</i>, <i>Transform.contentDisposition</i>, <i>Transform.contentDescription</i>.
    PayloadSwapbean is a standard module for replacing payloads with other payloads (SWAP)
    If you want to give each attachment a certain name use Parameters, <i>swap.keyname</i> for name of the payload and <i>swap.keyvalue</i>.
    I Hope the use of standard modules is understood.

  • Sender Mail Adapter, technical Acknowledgement

    Hi all,
    I have a SMTP --> XI --> Proxy Scenario. For the inbound message I get via SMTP, I'd like to send a technical acknowledgement back to the Sender (via SMTP, too). The acknowledgement has a specific message structure, for example it contains the DocumentID of the inbound message I get via SMTP.
    My idea now is: Within ReceiverDetermination, I configure two receivers:
    1. Backend system for the Inbound Proxy
    2. original Sender System
    Within Interface Determination, I'll do 2 mappings:
    1. Mapping from source message to ABAP proxy interface
    2. Mapping from source message to technical acknowledgement structure
    Then, receiver agreements / receiver communication channels for both interfaces.
    My question now is: is there a more elegant solution then doing the scenario like described above? Maybe something I can do in the Sender Mail Adapter to create the specific technical acknowledgement and sent it back to the sending application?
    Best regards
    Holger

    Hi Holger !
    XI supported acks are not available for your scenariom because the smtp/mail sender cannot request it.
    http://help.sap.com/saphelp_nw04s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
    You should create some kind of artificial ack, that should be part of your own protocol. What I meant with the SYNC proxy, is to use its response message as your own defined ack, because it is not supported as is.
    If you call your proxy async, then you will not receive any feedback to use it as ack info.
    Another idea could be to forget the ack per se, and just use define an alert in case of problems with the scenario to send a mail to the specified users.
    Regards,
    Matias

  • Sender Mail Adapter - default interface name

    Hi,
    I need to receive through one e-mail sender channel tree different kind of messages.
    In sender mail adapter I specify ecept other parameters "Default Interface Name". When I send a message with a same as defined in an interface the message is processed correctly.
    But when I send a different kind of message then I get an error : "Receiver could not be determined".
    Is any way around how through one sender e-mail adapter receive a different kinds of messages ?
    Thanks for any help,
    Marian

    Hello Marzian,
    have you find a solution for this problem?
    We're facing the same issue.
    thanks,
    -Peter Ha

  • Sender Mail Adapter issue

    Hi All,
    We are getting this error in Sender Mail adapter.
    "exception caught during processing mail message; java.net.ConnectException: A remote host refused an attempted connect operation"
    It is a (Lotus Notes) Mail to File scenario.
    Used POP3, and gave the URL as POP:// ** .
    I have tried pinging the server and getting a good response.
    I have also tried the OS01 ans it returned a response : Program Terminated.
    I am not sure if the POP3 port is enabled.
    Are there any check points we are missing ?
    Please throw some light on this as we need to solve this asap ..
    Yashwanth
    Edited by: YashwanthSVK on Aug 2, 2011 7:18 PM

    Shabarish is right.
    This seem a connectivity issue. Try to ping Mail server from your PI System and check pop3 port.
    This document can be helpful for you:
    http://wiki.sdn.sap.com/wiki/display/XI/SMTPConfigurationinSAPXI

  • Sender  Mail Adapter - java.lang.NullPointerException in CC monitoring

    hi,
    I configured my Sender Mail Adapter correctly.
    I have the correct POP URL, authentication. I'm not using PayloadSwapBean right now.
    I can't get rid of the exception inside my Channel monitoring.
    exception caught during processing mail message; java.lang.NullPointerException
    does anyone know why?
    I've been told the POP account has emails already.
    I will try to create an outlook account for this POP e-mail account in the mean time to see the e-mails.
    Thank you

    thanks aaron.
    I don't see the folder ./SYS/../j2ee/...
    will it be under another folder?  I don't see a trace log folder either.
    I think the problem might be in the Module tab.
    I tried.
    AF_Modules/PayloadSwapBean
    localejbs/AF_Modules/PayloadSwapBean
    /localejbs/AF_Modules/PayloadSwapBean
    sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    /localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    they all produce the same error. I wonder if these Beans actually exist.
    I think we might have to reinstall this Mail Adapter altogether.
    Or maybe it's really the connection to the Mail Server. But would it display this kind of message.
    This is what I'm looking at.
    Also, i had to use this URL
    pop://server:995/
    (995 is using SSL and it is the default port).  When I use this, I see the Java Null Pointer Exception a lot less frequently. Weird.

  • Using header paramter SHeaderX-MS-HAS-ATTACH  in Sender mail adapter

    I am trying to check if an e-mail contains attachment in reciever determintion
    I set the Variable Header XHeaderName1 to be SHeaderX-MS-HAS-ATTACH
    in Sender mail adapter
    I added a condition in the receving determintation
    XHeaderName1 = yes
    I see the DynamicConfiguration tab in sxmb_moni and the value of SHeaderX-MS-HAS-ATTACH is "yes"
    but the message fails with the error
    No receiver could be determined
    any ideas?

    Hi,
    In Receiver determination you need to set SHeaderX-MS-HAS-ATTACH = yes instead of XHeaderName1.
    As far my understanding, in receiver determination you need to verify the condition with  SHeaderX-MS-HAS-ATTACH = yes (check with syntax also ie. case sensitive and all)
    Thanks
    Swarup

  • Error when using Variable Transport Binding in Sender Mail Adapter

    Hi,
    I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
    I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
    I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
    However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
    Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
    Any ideas why this is happening?
    Thanks,
    Brad

    Hi Luciana,
    Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
    Good luck!
    Cheers,
    Brad

Maybe you are looking for