Duplicate my invoice please

Hello need of duplicate invoice of purchase I made the order number: (removed per forum guidelines)
My mail : (removed per forum guidelines)
Thanks
Luciano (removed per forum guidelines)

Hello lucianonetto,
Thank you for joining us on Best Buy Unboxed! I'm very happy to help with your request!
Based on the information you provided, I was able to locate the order and have some information for you. Please watch for a private message from me. To check your forum inbox, ensure that you have signed in with your user name and password, then click on the envelope icon in the upper right of this page.
I'm grateful that you wrote to us!
Regards,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

Validation Check - Duplicate vendor Invoices

Hi,
We have a situation where the Duplicate Vendor Invoices have been entered by the users, bearing the same date and reference nos. as the original ones. When we checked we observed that, the system gives the warning message, but the same is ignored by the users. To prevent the same from happening again, we want to convert the warning message into the error message.
Could any one guide as to how can we set up the validation checks, such that the system would throw an error message. In the vendor masters, we have set up the check for Duplicate Invoices.
Thanks in advance.
Best Regards,

Hi,
If you already know the message number, then go to T.code:OBA5 or
T.code:SE91 (if its an custom message class) and change the message from waring to Error.
If you are not aware of Message, and try to post a duplicate invoice & when the warning message comes, double click on the same, it will give you the message number.
This will resolve your issue.
Please let me know the result of the same
Thanks
Kalyan

Duplicate AP Invoices Error Setting

Hi,
How do I set duplicate AP invoices error in SAP?
Thanks,
Teo

Hi
If you have to do this, you need to check the field "Chk Double Inv" in the vendor master.
What happens?(please read the help for this field in SAP)
Checking Logistics documents
Firstly, the system checks whether the invoice documents have already been entered in the Logistics invoice verification; the system checks invoices that are incorrect, or invoices that were entered for invoice verification in the background.
Checking FI documents
The system then checks whether there are FI or Accounting documents that were created with the original invoice verification or the Logistics verification, and where the relevant criteria are the same.
Checking Logistics documents
In checking for duplicate invoices, the system compares the following characteristics by default:
Vendor
Currency
Company code
Gross amount of the invoice
Reference document number
Invoice document date
If all of these characteristics are the same, the system issues a message that you can customize.
When you enter credit memos or subsequent adjustments, the system does not check for duplicate invoices.
Exception: Country-specific solution for Argentina, where invoices and credit memos are checked for duplicate documents.

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

How do i check ensure that SAP checks for duplicate vendor invoice numbers?

Hi Experts -
How do I verify that SAP checks for duplicate vendor invoice numbers and blocks duplicate invoices from being paid?
Thanks!

Hi
Pls chek the settigs by following the path
IMG>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate Invoice.
Here you make the settings for creating a duplicate invoice check.
Moreever, in the vendor master, you need to tick the check box for duplicate invoice check.
I suggest you search the Forums before posting a query. There are lots of postings on this issue.
Thanks & regards
Sanil K Bhandari

Validation for duplicate AP invoice

We would like to prevent duplicate AP invoices from being posted through FB60.   We created an FI validation in OB28 in which the prerequisite = Tcode FB60, and the check is a user exit to check the values in vendor / company code / reference fields and if those 3 fields have the same values as in an existing document, to generate an error message preventing the duplicate document from being posted.
The above works well for creating new invoices.   However, when we have to make changes to an existing invoice (created through FB60), the system also calls on that validation and generates the error message, even though the only fields we can change on the invoice is payment terms, payment method, payment method supplement and text.
Other than modifying the user exit, does anybody know of a better way to do this validation or to prevent duplicate manual invoice from being created?
thank you.

This has already been answered before so extracted part of the reply
there are two duplicate checks in SAP:
1. the one for FI documents, this is relevant for all F... postings (but nor for MIRO!)
this can be turned off or on (in vendor master record) and 6 fields are checked:
Check Flag for Double Invoices or Credit Memos
Indicator which means that incoming invoices and credit memos are checked for double entries at the time of entry.
Use
Checking Logistics documents
Firstly, the system checks whether the invoice documents have already been entered in the Logistics invoice verification; the system checks invoices that are incorrect, or invoices that were entered for invoice verification in the background.
Checking FI documents
The system then checks whether there are FI or Accounting documents that were created with the original invoice verification or the Logistics verification, and where the relevant criteria are the same.
Checking Logistics documents
In checking for duplicate invoices, the system compares the following characteristics by default:
Vendor
Currency
Company code
Gross amount of the invoice
Reference document number
Invoice document date
If all of these characteristics are the same, the system issues a message that you can customize.
When you enter credit memos or subsequent adjustments, the system does not check for duplicate invoices.
Exception: Country-specific solution for Argentina, where invoices and credit memos are checked for duplicate documents.
No message is issued if you enter a document that has previously been reversed.
Dependencies
The system only checks for duplicate invoices in Materials Management if you enter the reference document number upon entering the invoice.
In Customizing for the Logistics invoice verification, you can specify that the following characteristics should not be checked:
Reference document number
Invoice document date
Company code
This means that you can increase the likelihood that the system will find a duplicate invoice, because you can reduce the number of characteristics checked.
Example
The following document has already been entered and posted:
Reference document number: 333
Invoice date: 04/28/00
Gross invoice amount: 100.00
Currency: EUR
Vendor: Spencer
Company code: Munich
You have made the following settings in Customizing:
The field "Reference document number" and "Company code" are deselected, which means that these characteristics will not be checked.
Now you enter the following document:
Reference document number: 334
Invoice date: 04/28/00
Gross invoice amount: 100.00
Currency: EUR
Vendor: Spencer
Company code: Berlin
Result
Because you entered a reference document when you entered the invoice, the system checks for duplicate invoices.
The reference document number and the company code are different from the invoice entered earlier, but these characteristics are not checked due to the settings you have made in Customizing.
All other characteristics are the same. As a result, the system issues a message that a duplicate entry has been made.
If the "Reference document number" had been selected in Customizing, the system would have checked the document and discovered that it was different from the invoice entered earlier, so it would not have issued a message.
Checking FI documents
Depending on the entry in the field "Reference", one of the following checks is carried out:
1. If a reference number was specified in the sequential invoice/credit memo, the system checks whether an invoice/credit memo has been posted where all the following attributes agree:
Company code
Vendor
Currency
Document date
Reference number
2. If no reference number was specified in the sequential invoice/credit memo, the system checks whether an invoice/credit memo has been posted where all the following attributes agree:
Company code
Vendor
Currency
Document date
Amount in document currency
2. the one for LIV.
this can be customized (as stated above) and is relevant for MIRO (and not for F... postings!).
Company, Reference and Invoice date
Set Check for Duplicate Invoices
In this step, you can configure for each company code if the system is to check for duplicate invoices when you enter invoices.
This check should prevent incoming invoices being accidentally entered and paid more than once.
You can choose whether to activate or deactivate the check criteria of company code, reference document number and invoice date for each company code. The more criteria that you activate, the lower the probability of the system finding a duplicate invoice. The Accounting documents are checked first, followed by documents from Logistics Invoice Verification (only incorrect invoices or those entered for verification in the background).
When checking duplicate invoices, the system compares the following
attributes in the standard system:
Vendor
Currency Company code
Gross invoice amount Reference document number
1. Invoice date If the system finds an invoice that matches all attributes, the system
displays a customizable message.
If you are entering credit memos, subsequent debits, or subsequent
credits, the system does not check for duplicate invoices.
The exception is the Argentina country version, where the system checks
for duplicate invoices and credit memos.
If a previously processed document is later cancelled and then entered
again, no message is displayed.
Requirements
The system only checks for duplicate invoices in Materials Management
if you specify a reference document number when entering the invoice.
In Customizing (IMG) for Invoice Verification, you can specify that the
system check the following attributes

Duplicate Vendor Invoice

Hi All,
while doing a direct posting in F-43, i want to avoid the duplicate vendor invoice. For this i know we can go to OMRDC and there we can activate it and also for that particular vendor in XK03 we need to tick the double invoice check and also we need to configure in OBA5 the standard message with ID 117 and type as E for error and W for warning.
but now my requirement is if user is trying to do direct posting, If
Docmuent date
Vendor number
Amount
Reference
all the four matches then the error message should be displayed
if any one those mismatches then insted of error i want to throw warning message.
to full fill this function where i need to write the code, i mean user exit of customer exit (any enhancement),
the message and message type it getting from the function module CUSTOMIZED_MESSAGE
Can any body help how to proceed further....
its urgent.....
Regards,
Sunil Kumar Mutyala.

Can any body help me

After highlighting a photo, then go to "edit" to duplicate that photo, the word "duplicate" appears to be gray, it can't duplicate. why? please help....

after highlighting a photo, then go to "edit" to duplicate that photo, the word "duplicate" appears to be gray, it can't duplicate. why? please help....

That command 'Edit > Duplicate' is used for pages in the book function:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=24%26se ction=8%26tasks=true
HTH.

I just upgraded my phone. I keep getting duplicate texts. Please help.

I just upgraded my phone. I keep getting duplicate texts. Please help. Thanks!

Toggle iMessage Off then On
Turning iMessage off then on again worked for my particular issue. You can do this by following these steps:
From the Home screen, open “Settings“.
Select “Messages“
Slide “iMessages” to off for about 3 minutes, then turn it back on.
Your iPhone will be re-registered and may clear up the duplicate text message notification problem.
Repeat Alerts Setting
There is a setting that repeats notifications which could cause this issue. Check it with these steps:
From the Home screen, open “Settings“.
Select “Notification Center“.
Choose “Messages“.
Ensure that the “Repeat Alerts” setting is set to “Once“.
Send & Receive Setting
Another setting that involves sending notifications to multiple numbers could be the issue as well. Check the following:
From the Home screen, open “Settings“.
Select “Messages“.
Choose “Send & Receive“.
Ensure that only your phone number is listed in the “You can be reached by iMessage at” area. If you have an email address or anything else listed, it could cause duplicate text messages.

Duplicate got posted - Please delete

Duplicate got posted - Please delete
Edited by: 833360 on 08-Feb-2011 00:59

It isn't easy. How do you precisely identify a "duplicate post" ? Suppose two thread have exactly the same words for the title and body (and are posted by the same person), which of the two should be deleted ? They may contain different responses, different numbers of responses.
You are asking for a human being to verify every thread and compare it with previous and current threads and make a judgement call.
Hemant K Chitale

After upgrading my iphone to v5 software I have duplicate calendar entries - please help

After upgrading my iphone to v5 software I have duplicate calendar entries - please help

Have same issue, reset doesn't help (
I can delete unwanted photos and albums following way:
1) Backup all photos from device (Important!!)
2) Connect to iTunes, enter managing device, select 'Photos' link
3) Select checkbox Sync Photos from <My Pictures>, choose 'Selected folders' but select NONE of them
4) Click Apply, agree to Delete All Photos from device
5) Uncheck 'Sync Photos from', click Apply
Now i have cleared all previous synced folders, that i unable to delete from device.

Duplicate vendor Invoice check in FB60

Hi Experts,
I want to put the duplicate invoice check while posting the vendor invoice through FB60. I want the system to check the duplicate invoices in combination of the Vendor code and vendor invoice number ( we put the vendor invoice no. in the reference field of FB60 ). How to make this possible. I do not want to make the FI validation for the same. Can you please suggest how to go ahead with this.
Thanks,
BABA

Hi Shailesh,
phuu, ok, let's start from the beginning then.
Some theory first:
you need the validation because the standard check takes the doc.date ito consideration and this is not wanted. And you need the exit from the validation (! not a separate exit! not the original), locate the IF-statements where there is an ELSE option ending with function CUSTOMIZED_MESSAGE. It is up to you what to do here. In the original functoin module, the messages are issued here immediately. It can be an error or a warning, depending on the setting in table T100C. If my understanding is correct, you always want to see an error message, bt this should be done in the validation, not in the function module. So you should skip the customized_message function call and just issue the messages here as info message regardless of T100C settings. In this case, remove the function call customized_message (as many times as it occurs) and issue the message included directly as an information. Right after the message was issued, set E_RC to 4, infoming the validation that the check has failed. (Note that the customized_message function is only called if the check has failed, so no worry that you always get the message.
4. Define the exit for the validation
=========================
Go to your form pool Z_RGGBR000 (defined in V_T80D) and locate the statement APPEND EXITS. It should appear few times, locate the last occurence.
Right after that, enter the following:
exits-name = 'U901' .
exits-param = c_exit_param_none.
exits-title = text-901.
append exits.
This will define a new exit namd U901 for the validation routines. If in V_T80D, you already had a Z (or Y) report, check if the string U901 is used in that code already (check for the main program). If this is the case, instead of U901, use another name, it should begin with U followed by 3 digits. Also, you make sure the text symbol text-901 (or the 3 digits you are using) is existing, doubleclick it and enter a description like "Duplicate invoice check validation" or similar.
Well, the exit is published, we have to write the main code now.
go to the very end of your Z_RGGBR000 report and add a new form U901 like follows:
Duplicate invoice check validation
FORM U901 USING B_RESULT.
Vendor master flag
data: l_reprf like lfb1-reprf.
Result of function module
data: l_rc like sy-subrc.
Check vendor master first
select single reprf into l_reprf from lfb1 where bukrs = bkpf-bukrs and lifnr = bseg-lifnr.
Do not continue if flag is not set.
if L_REPRF is initial.
b_result = b_true.
endif.
check not L_reprf is initial.
Call modified function module
CALL FUNCTION 'Z.....your function'
    EXPORTING
      i_bukrs = bkpf-bukrs
      i_lifnr = bseg-lifnr
      i_waers = bkpf-waers
      i_bldat = bkpf-bldat
      i_xblnr = bkpf-xblnr
      i_wrbtr = bseg-wrbtr
      i_koart = bseg-koart
      i_reprf = L_reprf
      i_shkzg = bseg-shkzg
      i_xumsw = bseg-xumsw
      i_bstat = bkpf-bstat
      i_belnr = bseg-belnr
      i_gjahr = bkpf-gjahr
      i_blart = bkpf-blart
EXPORTING
      e_rc = L_RC.
Decide if validation message must be issued or not
if L_RC = 4.
b_result = b_false.
else.
b_result = b_true.
endif.
endform.
After this, activate the source code. Make sure you have defined the text-symbol 901 before!
5. Define the validation
=================
Go to OB28 now, and enter your company code(s) and the call-up point 002 (line item). If there is a validation defined already, you have to add a new step only, if not, you have to create the validation anew.
I assume there is no validation defined yet, so enter a name for the validation like FI_2 or similar. It should NOT be named DUPLIC or similar, i.e., you should not include the purpose in the validation name. This is because the validation is defined on company code / call-up point level and it may contain many steps for different purposes later. A generic name FI-2 or probably your company code followed by 2 (2 is the call-up point) is the best choice.
Before presing enter go to the last column Validatin active and enter 1 here.
Then press enter and you will get an error that the validation does not exist. No problem, go to menu path Environment --> Validation and let's create a new validation.
First, enter a description for your new validation in the right hand panel. Again, this should be a generic description, tell nothing about duplicate invoice checks here.
You may be asked here to assign a message class to the boolean class 009. You should enter here a Z message class where the validation message should be issued from. If no appropriate message class exits, open a new session go to SE91, enter a new message class Z... press create, enter a description. Then go to the Messages tab there, and create a new message with number 001 (NOT 000) and enter the message text there. E.g. Duplicate entry not allowed.
Coming back to the validation, if the message class was already assigned (this is the case if there was a validation defined earlier), you can create a new step. In case of a new validation, it will become the first step. But if there was already a validation in OB28 for your company code and call-up point 2, then it will be the last step. In the left hand panel, make sure the new (or existing) validation is selected and press the Create Step button (Ctrl-Shift-F5).
In the right hand panel, enter a description for your step. This is the point where you can enter Double invoice check or similar.
We have three parts here, a Prerequisite and a Check part, finally a message.
In the left hand panel, select the Prerequiste. This will activate that screen block in the right side. We have to make sure that our validation is called only for the relevant vendor line items, so press Ctrl-F3 to hange to expert mode ) and enter the following in the Prerequiste window in the right hand panel:
BSEG-LIFNR <> '' AND BSEG-XUMSW = 'X' AND BSEG-KOART = 'K' AND
BKPF-BSTAT = ''
Beware '' is a ' followed by another ' and not a single " !!
Then switch back to normal mode using Ctrl-F1 and check the small lamp below that should be green now. Also, you can see the field descriptions now. If the lamp is red, press Ctrl-F3 again, delete all and copy the above again. Do not bother with line breaks. Switch to Ctrl-F1 again until the lamp is green. OK, what we have told here was please call the validation only if we have a vendor number and if this is a sales relevant item (invoice or credit memo, but not a payment or similar, this is the standard logic as well), and the account type is vendor (K) and this is a normal document.
WHen you are done here and the lamp is green, then go to the left side again and select the Check part. Now you should be able to edit the Check screen lock in the right hand side again. Switch to expert mode and enter simply U901
This is the name of the form in your Z_RGGBR000 report. NO brackets, no spaces, only U901 here. Switch back to Ctrl-F1 and instead of U901, you should see the text of your form (text symbol 901 in report Z_RGGBR000).
Finally, click the Message part in the left side to be able to maintain the message in the right side. If you issued an error from the function module already, you can give here an information, or you can give it as an error if you like. The message number is one of the messages from your Z message class, you have to define the text in SE91 (see above).
When done, save the validation and you can test it immediately.
Here a brief summary what is happening:
OB28 setting defines that in your company code a validation like FI-2 or similar is active on line item level. Whenever a line item is abut to be created, the validation will be called.
However, the prerequisite of the validation is quite strict: only a limited number or vendor items will allow to continue, other line items (G/L, customer, not sales relevant vndor, etc.) will just skip the whole validation.
If the prerequsite was met, the Check part is carried out. Here we have the exit U901.
In the exit, first we check if the vendor is flagged for double invoie checks. If not, we quit and processing can be continued. B_TRUE means it is OK. If the vendor is flagged, we call the new Z function which is almost the same as the original one.
The Z function will check table BSIP, but it will skip the document date comparison. If the current invoice seems to be entered earlier (regardless of the doc.date), instead of the standard customized message (which can be E or W for instance), the very same standard message will be issued as an information. So the user will be informed about the previous document number but the processing won't be stopped. In addition, a return code will be set to 4, meaning check has failed.
Jumping back to the exit, if the return code is 4, we have to tell the validatin that the check has failed (B_RESULT = B_FALSE), otehrwise we can tell the validation that the check was OK (B_RESULT = B_TRUE).
Now we are back in the validation, and, depending on B_RESULT, we just continue processing (B_TRUE), or issue an error message from a Z message class (B_FALSE). As the main standard message was isued already from the Z function, the user should know at this stage what the matter is. Your Z message can be a bit generic one, no need to include the vendor number or the previously issued invoice, etc.
Hope that helps, points welcome
Csaba

Print Original/Duplicate on Invoice/Purchase Order

Hi all,
Is there anyway to identify particular invoice/purchase order printed before or not.
(I want to print "Duplicate" in the document, if the document printed before.)
Thank you,
BK

Hi Buddhika,
Each company PO has its own unique number range which increments subsequently. So I believe no two PO's can have same number.
Please correct me if my understanding is wrong.
Thanks,
Anil

Duplication of invoice- please help

frnds
i posted one invoice with invoice date 04/18/2007, reference 2900 and cocode xx80
vendor 123909
i tried to post another inovoice with the same informaiton except invoice date which is 04/18/2007, it allowed me to post, shouldnt it stop me to post the inovice as reference and co code and vedor was the same?
i had following settings at OMRDC 1. co code was checked 2. reference doc no was checked 3. invoice date was not checked.
how can i stop the above entry?
please let me know
thanks

Source: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/sap+solutions&
<b>Duplicate Invoice Check</b>
In which cases a check for double invoices is run through (prerequisites)? Which function module is relevant? Which fields are relevant?
Solution/Answer:
Prerequisite:
If the field 'Chk double inv.' is marked in the vendor account.
The Function Module name is FI_DUPLICATE_INVOICE_CHECK
It will check
The following fields must be identical for Duplicate invoice check
     Company code                              (BUKRS)
     Vendor number                             (LIFNR)
     Currency                                      (WAERS)
     Reference number                         (XBLNR)
     Amount in document currency         (WRBTR)
     Document date                              (BLDAT)
If the document is having any one of the above filed different then the system does not consider it as a duplicate invoice.
http://help.sap.com/saphelp_47x200/helpdata/en/ce/4f3e39ea3aee02e10000000a114084/frameset.htm

Accounting document not generating for excise invoice-please help

Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help

Dear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat

Duplicate my invoice please

Similar Messages

Maybe you are looking for