Duplicate name found in Anayze File:

Getting errors the last few days:
Duplicate name found in Anayze File: MS10-060 2265906 983583 983588 983589 Security Update for .NET Framework 2.0 SP2 and 3.5 SP1
Is SR the only way to have it fixed ?

dtemple-sgi,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Duplicate name found in Anayze File: Adobe APSB11-08

Duplicate name found in Anayze File: Adobe APSB11-08 Acrobat Professional Extended 9.4.4 for Windows (Update) (Multi-Language) (See Notes){}
These messages apparently began appearing in workstation message logs on May 21st. They are still continuing today as well.
SLES 10 server, ZCM 10.3.3

Same issue here. I have a call in with Novell for this, so hopefully it will get sorted soon. I suggest others with this issue raise calls as well to get it up the priority list.

Duplicate names of the same file at playlist

Hi. I'd try to put all my music files at the same place. iTunes should do this, but doesn't work. After several times, I could delete all files outside iTunes folder. But a lot of songs remain duplicated in the playlist. When I click to show it in finder, I see the SAME FOLDER, in other words, is the same file listed twice. I'm out of ideas, any suggestions?

If nobody answers your post within a few days (or hours on the busier forums) then it will get buried under all the new topics and gets less likely to be answered as time moves on. A timely bump is often all that is required.
I'm not sure I understand your original question. There are a number of ways to get duplicates in iTunes. You can import the same file more than once so iTunes may make two copies, typically as Song.ext and *Song 2.ext* in the same folder. Under certain circumstances, e.g. with a disconnected external drive, it may be possible to add the same physical file more than once to the database. In this case two entires point to the same file. Regular (not smart) playlists are an ordered list of pointers to files and may contain the same pointer more than once. Normally there is a warning (but you may choose to disable it) that says when the list of files that you are about to drop onto a playlist includes some that are already in it and asks you to confirm if you want to create duplicate entries.
Whatever the cause, iTunes dones't provide a simple tool for deduping your library or your playlists. You might find Show Duplicates or Show Exact Duplicates useful, but you will still have to manually select and remove duplicate entries while taking care not to accidentally remove original files you want to keep.
These problems are nothing special to iTunes and can affect any media player. Keeping your data clean is a matter of housekeeping.
tt2

Essbase add-in Error (duplicate name found in grid)

Hi,
I have upgraded from 7.3 to 9.2 essbase add-in and get the following error when zooming into a product dimension - seems to be a problem with base member name and alias showing duplicates!
However this error does not occur on a new installation of 9.2 where there was no previous version of essbase add-in!
Has anyone experienced this or know of a work around? - the Cube is built using ASO/AIS

Same issue here. I have a call in with Novell for this, so hopefully it will get sorted soon. I suggest others with this issue raise calls as well to get it up the priority list.

After I updated to iOS 8, I noticed that while copying photos to my PC, I see photos being categorized into many folders. I also found some system files in each of the folders containing photos (in the name of Local Disk). Is this usual?

After I updated to iOS 8, I noticed that while copying photos to my PC, I see photos being categorized into many folders now. I also found some system files in each of the folders containing photos (in the name of Local Disk). Is this usual?

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

Cannot duplicate event due to same file name

I'm trying to archive some video projects my boss has made using Final Cut Pro X 10.0.7 on OS X 10.7.5. The problem I'm having is that I cannot "Duplicate Project + Used Clips" like I have done in the past because this project uses clips from three different events, and each of these events contains files that happen to have the same names as files in the other events.
For example:
Event A
- 00000-1.m4v
- 00000-2.m4v
- 00000-3.m4v
Event B
- 00000-1.m4v
Event C
- 00000-1.m4v
- 00000-2.m4v
So let's say the project he's created uses all these clips. If I attempt to "Duplicate Project + Used Clips", it won't work because 00000-1.m4v from three different events is used in the project. Apparently FCP is written in such a way that it allows you to fall into this trap. What it should be doing is either not allowing you to import a file into an event if that file name already exists in another event, or it should be smart enough to rename duplicate files on-the-fly when exporting (for example, 00000-1-1.m4v and 00000-1-2.m4v). But it does neither of these things.
The problem here is that these are the three events:
Event A = 108 clips
Event B = 68 clips
Event C = 80 clips
All FCP will say is that "two or more media files use the same name - rename the file or files and try again". Only it's not talking about the name of the file from within FCP -- it only cares about the file name as seen in the Finder. So even if I went into event A and put "A-" in front of all the clilp names, it doesn't matter, because it's not really "A-00000-1.m4v" -- the file is still named "00000-1.m4v" in the Finder, and the problem is unresolved.
Does anyone know any way of sorting out this problem without a massive amount of digging around, renaming files by hand and relinking?

I'm still stuck on this problem and in a couple of days I'm going to be sitting in on a webinar that will discuss archiving in FCP X.
I have tried several things and if I'm missing something I'd like someone to let me know. I also cannot find much on this subject which is very surprising...or I'm not searching in the right places. I'm going to submit feedback to Apple as follows:
Error: “The operation cannot be completed. Two or more media files use the same name. Rename the file or files and try again.”
Operation attempted: Duplicate project with used clips.
Second operation attempted: Consolidate project media > Copy used clips only.
Cause: Two or more events contain clips with the same name.
Eg.
event-20130126
          GOPR0002.mp4
event-20130220
          GOPR0002.mp4
Background:
          This video project resulted in a one hour documentary that used recordings from 6 different cameras shot over a span of 4 months. Each day’s recording, for the most part, was broken into separate fcp events. This resulted in 48 events.
          AVCHD imports result in media files whose name reflects the date and time of the recording which makes each of the imports’ media file names unique, even across all events.
          Imports from cameras such as GoPro’s Hero use their own original file names such as GOPR0001. Therefore media file names are not unique across all events.
          Due to render and export problems, the video was broken up into 14 separate FCP X projects, aligned with what would ultimately be a “chapter” in the resulting video.
          The 14 projects “share” events; i.e. the events used in the 14 projects (chapters) are not mutually exclusive.
          The source media as well as the events span over 3 physical external hard drives.
          All 14 projects are on one hard drive.
Consideration #1:
          It would seem that one way around this problem is to merge all 48 events. I will not do this since this function moves the events rather than copies them. Additionally, I’m not even sure if I have enough space to consolidate all 48 events anywhere available to me.
Consideration #2:
          This leaves only one other option which is to rename the source media files and relink all of them across all events.
Questions:
          1.          Why can’t FCP (internally) qualify the media file names that it imports with the event name? i.e why is it left up to the user to insure that all of the media file names are unique across all events used by a project?
          2.          If it doesn’t do #1, then why were we not warned of this before starting. I find out about this when I’m done with my project and trying to archive. Now it’s a huge task to rename and relink.
Thoughts:
          Regardless of whether there is work-around to this problem, the fact that FCP has a “feature” such as events and allows projects to use more than one event but does not manage them properly reveals a weakness and flaw. If such is the case, then it would be less painful, in this situation, to force a project to use only one event.
I wish that others would speak to this problem. Or let us know what the answer to this is.
Thanks.

Three Nikon Cameras have created duplicate names of files -How do I rename?

I have loaded hundreds of photos with duplicate names from 3 cameras that use the same naming sequence. How can I at least rename one of the duplicate file names so that I don't have duplicates??????? I appreciate your help.
-Paul

Take a look at FileWrangler-it might do what you want.
Having identical files names is more of a nuisance than a problem these days since the actual files are in different folders.
Another option: you could try creating keywords like "Nikon 1", "Nikon 2" and "Nikon 3" and batch tagging the images that way.

Found a swap file by the name ".bash_profile.swp"

I am new to Mac and trying to figure out why my .bash_profile is not working. As I read suggestions, I try them. Here is my latest issue:
E325: ATTENTION
Found a swap file by the name ".bash_profile.swp"
owned by: Brian dated: Fri Apr 10 22:09:01 2009
file name: ~Brian/.bash_profile
modified: YES
user name: Brian host name: brian-principes-macbook.local
process ID: 655
While opening file ".bash_profile"
(1) Another program may be editing the same file.
If this is the case, be careful not to end up with two
different instances of the same file when making changes.
Quit, or continue with caution.
(2) An edit session for this file crashed.
If this is the case, use ":recover" or "vim -r .bash_profile"
to recover the changes (see ":help recovery").
If you did this already, delete the swap file ".bash_profile.swp"
to avoid this message.
Swap file ".bash_profile.swp" already exists!
[O]pen Read-Only, (E)dit anyway, (R)ecover, (D)elete it, (Q)uit, (A)bort:
Any suggestions?

I am new to Mac and trying to figure out why my .bash_profile is not working. As I read suggestions, I try them. Here is my latest issue:
E325: ATTENTION
Found a swap file by the name ".bash_profile.swp"
owned by: Brian dated: Fri Apr 10 22:09:01 2009
file name: ~Brian/.bash_profile
That is NOT a Mac thing, it is an Open Source Vim (which is often the default vi editor) thing. You will get this kind of behavior on any system when using Vim.
You can get this for 2 reasons. First if you are actually editing this file from another terminal session. Second, if the previous Vim editing session terminated from unnatural causes.
If you think it was from unnatural causes, then you select Recover. Save your changes :w and exit from the Vim :q
The next time you launch Vim for that file the .swp file will still exist, but this time you can choose Delete, as you have saved your recovered work the previous session.
If you are uncomfortable using vi/Vim editors, then may I suggest you try the nano editor. It will get the job done, but unlike Vim, nano is not as overloaded with features that take a long time to learn and master.

Stranger error:Old file not found.However,a file of the same name was found

Hi All,
I appologise if its not the right forum...
I am a bit baffeled here by the following error when I am trying to install Java SDK or just JRE.
I upgraded my windows 2000 box to win XP home edition, installed the latest updates etc and then tried to install java....
and got the following error
bin\appletviewer.exe:
Old file not found.However, a file of the same name was found.No updates done since file contents does not match.
I have removed everything from system that I could imagine might be using Java directly or indirectly. No JRE on the system, no old java folder under C: drive etc, But I still get the same error. I have never come accross a stupid error like this before. Any help will be appreciated. Thanks
Message was edited by:
Khalid.Ali

hunmm..thanks for the reply, I will try to find appletviewer.exe, however, my guess is that file should be there cus I am just trying to install it from standard java SDK installation.
Yes I did not do checkdisk and I will do that and post my findings

Aperture keeps multiple duplicate images in the library file which do not show up in the app

So, I recently had to merge two libraries which have some common images. Although upon import Aperture asked me if I wanted to "Add or Merge" the libraries (I selected "merge", which wouldn't import duplicates), I wanted to confirm there were no duplicates in fact brought in. I ran Duplicate Annihilator, which made a strange claim (about most photos, in fact): it showed a file as a duplicate which had no copies that I could find - searching for it by name revealed exactly one image.
Curious, I searched inside the actual photo library. Imagine my surprise when I found the following files
...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
...Library/Masters/2007/Aug 10, 2007/IMG_0002 (1)/IMG_0002.JPG
...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
which are in fact *exactly* the same image. Meanwhile, to reiterate, Aperture shows only ONE photo:
IMG_0002.JPG
Shocked, I investigated further. In fact almost every single file which was in common between both libraries was "imported but not displayed", which explains why my two libraries of sizes 50GB + 50GB after merger = 100GB when, the two libraries in terms of images had 10k + 12k after merger = 14k images.
Aperture imported all the photos into the new library. But it just opted not to use half of them.
So, now I have a bloated-by-2x library, and of course the frustration with Aperture having made such an insane, bone-headed move. Those files are essentially dead weight which will follow the library around for all eternity.
1) Why?
2) How to fix?
thanks!

I would take a step back here before going further. William's suggestion might very well clean up the library but something obviously did not go right and to start mucking about in the library might make things worst.
For starters I'm surprised to see the folder structure you showed in your first post. Aperture stores managed masters (originals) by import date and time. The structure (in all libraries I've ever seen) looks like:
So something seems wrong with your master folder.
Also the three folders you showed the first and third are identical ( the middle one has the (1) added to which is how the OS handles duplicates in a folder) so this shouldn't even be possible, those folders should not be there.
I'm wondering if this is something left over from your using Duplicate Annihlator. Do you have a copy of the library before you ran the merge and used DA on it? Would be interested to see what the master folder looks like.
Finally when you ran the merge which library did you tell Aperture to use as the master, the one that was used to resolve conflicts?
Again William's suggestion might be all you need to do but it would be good to figure out want went wrong before proceeding.
regards
Message was edited by: Frank Caggiano - A better first step might be to run the Aperture first aid tools, repairing and possibly rebuilding the library.

ERROR ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found

Hi,
SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -ctf I C:/temp/51030721/EXP2/DATA/SAPSSRC.STR C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.TSK ORA -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195133
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: ABTREE created #20071018195134
(IMP) INFO: import of ABTREE completed (39 rows) #20071018195134
(DB) INFO: ABTREE~0 created #20071018195134
(DB) INFO: AKB_CHKCONF created #20071018195134
(IMP) INFO: import of AKB_CHKCONF completed (0 rows) #20071018195134
(DB) INFO: AKB_CHKCONF~0 created #20071018195134
(DB) INFO: AKB_INDX created #20071018195134
(IMP) INFO: import of AKB_INDX completed (0 rows) #20071018195134
(DB) INFO: AKB_INDX~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO2 created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO2 completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO2~0 created #20071018195134
(DB) INFO: APTREE created #20071018195134
(IMP) INFO: import of APTREE completed (388 rows) #20071018195134
(DB) INFO: APTREE~0 created #20071018195134
(DB) INFO: APTREE~001 created #20071018195134
(DB) INFO: APTREET created #20071018195134
(IMP) INFO: import of APTREET completed (272 rows) #20071018195134
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195134
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195314
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP INDEX "APTREET~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195315
I'm getting this error "duplicate keys found". I'm finished installing the central instance and during the database instance, i got this error. I'm installing BW 3.5 on x64 windows server 2003 platform. I'm using NU kernel 6.40.
Thanks for your suggestions on how to resolve this error.
Reward points guaranteed.

Issue solved by deleting central and database instance and started a new build. it finished without an error.
Thank you.

ITunes lost all the names of my audio files

I can appreciate that there are some people who need to have organisation forced upon them because they are incapable or too lazy to do it for themselves. I personally hate apps which take control of my computer or file system and put things where I can't find them.
I have always had my iTunes prefs set to manually manage my audio files. I record messages from our Church services to put on the internet for people to listen to who are unfortunate enough not to be able to attend the service, for whatever reason. Each recording has a different speaker and message heading, which I manually type onto each file after I have converted it from AIFF to MP3. The files are all called 01 Track 01 in their default state from our CD recording equipment.
I had over 1 year's worth of speakers in a folder with, on ocassions, 2 - 3 speakers per week. On one particular day last week, I was doing something on my computer (can't remember what now) but a message appeared which said something along the lines of - 'can't complete your request because your iTunes library is not organised, do you wish to do that now?' and without thinking I pressed the ok button and the task completed.
It was not until the next Sunday when I went into the folder to retrieve the file called 01 Track 01 from amongst all the other named files, that I found over 100 files all with the titles 01 Track 01 1, 01 Track 01 2...3, etc etc. - so much for Apple's brilliant organisation, now I will have to go into each one individually and try to recognise each speaker's voice and wait until he announces his reading before I can name the files to something I will recognise in the future.
iTunes asked if I wanted to 'organise' my files - not rename them, I am so angry about this and I'm guessing there isn't an easy way to fix this - OK, I use Time Machine to backup my discs - but there is 100's of MBs of data to transfer over when it is only the names I need - I KNOW, somebody is going to tell me that it would surely still be quicker to do this than retype all the names - I WILL do this if there is no other option, but I'm hoping that Apple or somebody will be anble to suggest a quick way for me to get all the names back onto the right files.
Any suggestions anybody?
Thanks

iTunes: Specific update-and-restore error messages and advanced troubleshooting

Birthday calendar for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

my birthday events for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

I have uploaded the InDesign file so that you can take a closer look at:
http://www.hsdesign.comuf.com/downloads/
The file is called "Template_File.indd"
So, as discussed the main issues are:
1) The TOC doesn't generate all the listings (only those with the applied paragraph style "Heading 1 - Appendix")
2) When I try to create a new pargraph style and apply it to existing or new text, it reads the pargraph style in the Paragraph Style menu, but the style doesn't actually apply.
Hopefully you can figure something out from this. I really appreciate your help.
Thanks!

File Name error when creating file in Solaris C locale

Background Info:
1.In Java, we can use new File(filename) to create a new file. The filename there is a string denoting the name of the new file.
2.As mentioned in bug4409965, "The 'C' locale in a 7-bit ASCII locale, the 8bit characters enteredn are not read in properly probably because in that locale, the input byte stream is expected to contain only 7bit characters, anything else is 'garbage'".
My problem is:
when I tried to construct a filename containing non-ASCII characters in the Solaris C locale, Java works quite different from C language.
To be specify, follwing c code works quite well in C locale:
char * temstring = "\0xd6\0xd0";
FILE* fd = fopen(temstring, "w+");
fprint(fd, "test");
fclose(fd);
Although the created file can't be viewed in C locale, the filename shows quite well in other suppoted locale , which means the filename doesn't get modified.
While in Java, the following code
File f = new File("\0xd6\0xd0");
fos.println("test");
try {
f.createNewFile();
} catch (IOException e)
System.err.println(e.toString());
will generate the file in C locale as ???? as garbage file name. Even in the proper locale, the filename can't be read correctly.
I doubt the JVM in Solaris (file unixfilesystem.c) has modified the input filename and made the filename unreadable.
I just wonder if there is some workaround to solve this problem, which means I can correctly generate the filename using Java just as what the C code has done: create the file just as what I denote instead of modifing the filename.
Thanks

Hello:
Any luck with this problem?
I am facing the same problem and was wondering if you had found a solution....
Thanks
Kiran

Firefox doesn't reconvert special characters in the file names when download a file with any special characters in the file name

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/815207]</blockquote><br>
if i try to download a file with any special characters in file name (e.g. File_Name.pdf), it doesn't reconvert them from the "sanitize url" process and download the file an incorrect name (e.g. File%5FName.pdf).
This is really annoying.
Thank you for your patient

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Duplicate name found in Anayze File:

Similar Messages

Maybe you are looking for