DUPLICATE POST - DELETE/IGNORE
DUPLICATE POST - DELETE/IGNORE
Message was edited by: BallisticJack
transact wrote:
The administrator, can he delete this post? Because it's here 3 per.
Thanks.
TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time.
Similar Messages
-
>Duplicate post deleted to comply with the VZW ToS, Please follow the original post at the link below. This thread will be locked<
Unsatisfactory Moto X Rollout
Message was edited by: Verizon Moderator><here ya go:
http://cache.vzw.com/multimedia/mim/stratosphere/stratosphere.pdf -
Duplicate post - please ignore - sorry! :-(
Duplicate post - please ignore - sorry! :-(
I hate sites like this. There's no way to get from one
sublevel to another
without going to the top level.
I suggest you not use fly-out-type menus, but instead, have
subordinate
sectional navigation on each page within a given section. You
can easily do
this with a single template using Library items in an
editable region for
the sectional navigation, or better, using server-side
includes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Andrew_G" <[email protected]> wrote in
message
news:e3bcqe$1fc$[email protected]..
> Hi
>
> I have eight categories to display in my site
navigation.
> Each category has at least one (some have two) levels of
subcategories.
> For example for one of the categories :-
> Health > Level One.
> Mens Health > Level Two cascading from this.
> Prostate Trouble > Level three cascading from Mens
Health.
>
> I only want users to see the level ones (Health in the
example above) on
> initial browsing of the site and then by clicking on
these the associated
> sub-categories (of that category only) will be
displayed.
> How can I organise my navigation using templates or
libraries to allow
> this?
> With only one template it's all or nothing as far as I
can workout and I
> suppose what I want is the equivalent of 8 libraries (?)
to correspond
> with my
> 8 navigation headings.
> I hope this makes more sense to you Dreamweaver experts
than it does to me
> reading it back
> Many thanks
>
> -
Duplicate post, please ignore
Hi everybody,
At first, don't mistake me if my english language is very medium, moliere's language is my native language.
So I installed Oracle 11g R2 on Linux Platform, and I try to create a new connection via SQL Developer.
I put login, pass I create while proceeding installation
and database name on SID
But I have a TNS error when
Best regards,
Transact
Edited by: transact on 4 déc. 2010 13:48transact wrote:
The administrator, can he delete this post? Because it's here 3 per.
Thanks.
TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time. -
Duplicate post deleted by Moderator.
xxxxxxxxx
*Dear Vishwa.*
*This is My Problem.My Problem Not Solved.So Will Try For Diff Methods.I'm Not Playing.*
*I'Know How to Use Forum.*
*How to insert the Pageno. in consider PONO.*
You definitely dont know how to use the forum. If you did know, you will definitely not post more than one thread for the same issue. First. learn how to use the forum, then you will get requried answers. -
Ignore
anonymous_user wrote:
Does this problem occur if you use the default (non-modified) awesome rc.lua?
Does it change anything if you place the mouse cursor over the awesome bar before typing the command?
I copied the rc.lua from /etc/xdg/awesome, as per the ArchWiki's page on AwesomeWM. I've made only one change since noticing this problem (changing the wallpaper), but the problem was there from the start.
Nothing changes if I place the mouse cursor over the bar at any point.
I forgot to mention in the OP that the escape key doesn't close the prompt when I open it a second time (after entering something). I can, however, press Mod+x to change it to a lua code prompt, but that behaves the exact same way. -
Sorry, I'm new to all this and I just inserted a flash file
into my dreamweaver html page. the whole page is black, and while
the movie is loading, there is a large white BOXLee,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Duplicate post - ignore please
duplicate message whoops! please see the other post ;)
transact wrote:
The administrator, can he delete this post? Because it's here 3 per.
Thanks.
TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time. -
I spent a lot of time chasing this down so thought I'd post something since I didn't immediately find the Metalink note mentioned below.
I migrated a 6i form to 11g then tried to compile the module in Forms builder. It closed on me with no error. I couldn't find any log or error file. Compiling the form with frmcmp gave me an error file but it seemed to randomly stop at different points no matter how many triggers I eliminated. In addition to that, compilation of the PL/SQL didn't cause a crash.
I finally stumbled upon a Metalink note that provided the answer: "An Item's Column Name Property Containing a Long DECODE Function Causes the Forms Compiler to Crash [ID 465970.1]." Sure enough, I had a column name with a decode in it. After I removed that, the compilation succeeded. The solution in the note says to reduce the length to less than 140 - that didn't work for me. I had to remove the decode altogether.
Edited by: Tammy Osborn on Oct 19, 2010 1:13 PMtransact wrote:
The administrator, can he delete this post? Because it's here 3 per.
Thanks.
TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time. -
Please help me to delete a duplicate post on this forum?
Hi everyone,
I have two discussions on this site, quite similar, and the reason why is I forgot to write some stuff. So, I now have this 'duplicate' old post with incorrect and misleading info...the post I want deleted is here: https://discussions.apple.com/message/23607239#23607239
I found out the only way to delete a post is to report it, but I cannot report my own post. And I'm Level 1 anyways, only Level 2 and up can report posts. So I'm calling all Level 2+, to help me delete this post. Simply click on the link and report as a duplicate post. Thanks in advance.mende1 -- what? Did you do the link I gave, as that is the incorrect and old info one!https://discussions.apple.com/message/23607239#23607239
Kind regards
Krishna (krishnalovesyou) -
Duplicate post, please delete this one. sorry
this is a duplicate post. sorry guys, didnt mean to.
When I encountered this in CP 1 or 2, it was because 'export
as .zip
file' (or whatever that option is) was not checked. You gotta
publish to
a .zip file to get the supporting SCO files...?
Erik
Dana_L wrote:
> Cap4 did not publish
> any of the SCORM resources (manifest, SCORM support,
etc) or zip the files.
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips! -
Mods, could you delete duplicate posts?
Hello Mods,
Could you please remove duplicate posts here:
http://discussions.apple.com/thread.jspa?threadID=974752&tstart=0
There must have been some sort of error with the software and my post was repeated three times.
thank-you,
littleshoulders [:-)I just encountered the same. First my reply said it had timed out. Next a message that I could not reply more than once in 30 seconds, then posted another reply. Still nothing in this thread but probably will be duplicated.
http://discussions.apple.com/thread.jspa?messageID=4625467
EDIT: Then, "First my reply said it had timed out. Next a message that I could not reply more than once in 30 seconds, then posted another reply. Still nothing in this thread but probably will be duplicated.
http://discussions.apple.com/thread.jspa?messageID=4625467
Now, "An error has occurred. We apologize for the inconvenience."
-mj
[email protected] -
How to avoid duplicate posting of noted items for advance payment requests?
How to avoid duplicate posting of noted items for advace payments request?
Puttasiddappa,
In the PS module, we allow the deletion of a component pruchase requisition allthough a purchase order exists. The system will send message CN707 "<i>A purchase order already exists for purchase requisition &</i>" as an Iinformation message by design to allow flexible project management.
If you, however, desire the message CN707 to be of type E you have to
modify the standard coding. Doing so, using SE91, you can invoke the
where-used-list of message 707 in message class CN, and to change the
i707(cn)
to
e707(cn)
where desired.
Also, user exit CNEX0039 provides the possibility to reject the
deletion of a component according to customers needs e. g. you may
check here whether a purchase order exists and reject the deletion.
Hope this helps!
Best regards
Martina Modolell -
duplicate post, can be deleted.
Edited by: ksmek on Nov 6, 2008 10:18 AMI hate sites like this. There's no way to get from one
sublevel to another
without going to the top level.
I suggest you not use fly-out-type menus, but instead, have
subordinate
sectional navigation on each page within a given section. You
can easily do
this with a single template using Library items in an
editable region for
the sectional navigation, or better, using server-side
includes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Andrew_G" <[email protected]> wrote in
message
news:e3bcqe$1fc$[email protected]..
> Hi
>
> I have eight categories to display in my site
navigation.
> Each category has at least one (some have two) levels of
subcategories.
> For example for one of the categories :-
> Health > Level One.
> Mens Health > Level Two cascading from this.
> Prostate Trouble > Level three cascading from Mens
Health.
>
> I only want users to see the level ones (Health in the
example above) on
> initial browsing of the site and then by clicking on
these the associated
> sub-categories (of that category only) will be
displayed.
> How can I organise my navigation using templates or
libraries to allow
> this?
> With only one template it's all or nothing as far as I
can workout and I
> suppose what I want is the equivalent of 8 libraries (?)
to correspond
> with my
> 8 navigation headings.
> I hope this makes more sense to you Dreamweaver experts
than it does to me
> reading it back
> Many thanks
>
> -
Duplicate Post in Error... Apologies
Duplicate Post. Please ignore.
If you know how to remove it please let me know though
Edited by ejb3workshop at 12/05/2007 4:47 AM
Edited by ejb3workshop at 12/05/2007 4:50 AMDuplicate Post. Please ignore.
If you know how to remove it please let me know though
Edited by ejb3workshop at 12/05/2007 4:47 AM
Edited by ejb3workshop at 12/05/2007 4:50 AM
Maybe you are looking for
-
My final cut wont let me download my footage.....why?
ok first let me say that to fix this i can delete final cut and start over however i cant seem to delete all of final cut. the main bulk of it is hiding someplace and i cant seem to get it all. very frustrating. i have used "FIND" and delete everythi
-
Itunes causes Windows Vista Explorer shortcut buttons to misbehave
Hi, I've been observing some strange phenomena on my Windows Vista which my wife recently correlated to running ITunes. I'm pretty sure she is right about ITunes being the cause. When ITunes has been running for a while, the shortcut buttons at the b
-
OS 10.4.5 Crashes
Hi, For reasons I cannot explain my G4 powerbook running on OSX10.4.5 is unexpectedly crashing. It was working fine then the screen went halftone shaded (like with dashboard) and the following message came up "You need to restart your computer. Hold
-
Infosource to be used for both Direct update and Flexiable update
Hi, I had a Data source 0CUST_SALES_ATTR. A infosource is created Direct Update of Master Data from DS:0CUST_SALES_ATTR to 0cust_sales. So the Data source 0CUST_SALES_ATTR is being used to load ATTR data of 0CUST_SALES. Now as per my requirment c
-
Hi all, My client has a requirement to capture a simple handwritten signature on a PDF form whenever they use the form with one of their customers. They have a tablet pen with their laptops and just want the signature on the form as the image and lef