Duplicate reminder emails for the same event

Some of my users are experiencing duplicate reminder emails for the same event. These duplicates have the same bodies, different message-id headers and posted at exactly the same time.
Has anybody seen this sort of behavior and know a fix.

We had the same problem. At us I noticed the start/stop from the server went wrong. There were double processes running from the server. You should have 1 admin process, 1 notify process, 1 enpd process and (same as your cpu count) httpd processes.
When the other ones are more then 1, restart the system.
This receiving double e-mail reminder problem, you will only find at people who have AND event notifications on AND event & task reminders on! People who don't have BOTH activated, don't receive double reminders.
Also watchout that your test calendar system can't send e-mail notifications to your production users. But this you can see by reading the headers from the e-mail .. the system where it comes from is then different.
Hope this helps.
Greetz,
Miranda

Similar Messages

  • Using addresses, can you print duplicate mailing labels for the same address

    using my address book, can I print duplicate mailing labels for the same name and address. 

    I checked the Address Book Print Dialog and I did not see the option to duplicate a single label.
    The only thing you could try is to select the name in your list. Then do Command-P to print which should get you to this dialog box:
    Try changing the # of copies and see if that does what you want. Otherwise I'm not sure and your answer may best be found in the Address Book forum on here.
    You may not want to incue the expense but Microsoft Word will do what you want.

  • Workflow sending 20 email notifications every one hour for the same event

    Hi Experts,
    We had an issue on a clientu2019s prod system that the workflow triggered the same event 20 times in one hour. Later, a client has resolved the issue by removing the information from the workflow administration and reentering it back again. The workflow administration contains email settings, web settings, workflow roles, and active workflow maintenance. Although, the issue has been resolved but a client still needs to know how that happened. I would like to get some helpful opinions on how this happened because I am very new to the workflow. I would really appreciate your opinions.
    Thank you
    Don P.

    Hi Sue,
    Thank you for your response. I am not sure if the event has been triggered erroneously. The client told us that it didn't happen in the dev system when he tested it, but it only happen in the prod system. This project went live a little bit over a year ago without any issues, but it just happened the first on 6/22.
    The event is about to notify the user to review a new incident report (EHS), and it's same event id for all 20 email notifications. We will a client to look into their system about how this event raised?, what does the event log reveal? and if he uses the event queue. Again, thanks for your response.
    -Don P.

  • How to get rid of mutiple events showing in calenders for the same event

    How do you get rid of mutiple events that show up in your calender of the same event. It doesn't matter what kind of event it is whether personel or yearly holiday it shows up mutiple times in the month view, list view. I've gone through and deleted events manually and said for all future events but this is time consuming, because you have to do it for each event. Is there a qicker way of getting this done? Also just an off note I found out that my bluetooth headsets stop ringing throught the ear piece like they did before the upgrade, any insight into this?

    If I understand your question correctly...
    try the following
    from Sources, choose the greyed out streaming library that you want to be rid of...in your case, make sure it is the right one, since they both have the same name.
    You should get a screen that says "Library Unavailable" with 2 menu choices below that, "OK" and "Disconnect from iTunes".
    Choose disconnect from iTunes and the library should be gone from your Sources.

  • Fixing duplicate database entries for the same audio file

    My iTunes Media folder is stored on a network accessible storage server. Since upgrading to 11.1.x, my computer seems to be duplicating database entries for the same audio files - for some albums, I have 4 entries for every song, each one pointing to the exact same file. The only difference between entries is rating info and play counts, which are specific to a particular entry (I think). Has anyone else seen this behavior? Is there an obvious way to stop this from happening? I can delete and rebuild the database from media files, but that starts getting old if I have to do it every week or so. Is there a script to delete duplicate database entries? (I found a VB script on the iTunes for Windows community, but the offending machine is a Mac).
    Thank you for any assistance!
    K

      Select the photo stack under the People tab and click the rename icon (bottom left)

  • Why do i have 2 entries for the same event in iCal?

    I have just upgraded to OS Lion, purchased an iPhone 4S and have also moved to iColuds - why do I have 2 entries for all my events in iCal?

    You can just delete the ones you don't want from the document Library. Be careful though, that you do not delete the symbol(s) that are being used on the canvas.
    It's hard to say how you got so many duplicates in the first place without knowing your workflow.
    My guess is that you created a new symbol every time you added something to the canvas, but that is only a guess.
    HTH
    Jim

  • Multiple event handlers registered for the same event and error when adding users to sec groups

    Project Server 2013 CU April (May) 2014
    I've created and installed two event handlers (separate dll:s) and both are triggering on Project Published - initially, both are working fine.
    After an IISReset, trying to create a new security group (or add a user to an existing group) will result in an error on the page and a corresponding error in the ULS log - the latter indicating an error in the method security.creategroups, and specifically
    a problem 'An item with the same key has already been added.'
    An SQL trace reveals a break in execution after executing the proc 'pub.MSP_ADMIN_ReadEventReceivers' which returns all registered event handlers.
    In my case, the result of that proc execution shows that there are two event handlers registered with an EVENT_ID of 53 (Project Published) and with ORDER_FIRED set to 1 and 2 respectively.
    I tried removing one of the event receivers using the Central Admin PWA interface and then everything worked just fine - I added the event receiver back again, and everything STILL worked! IISReset and I got the error back again. :-(
    Since there's obviously some problem with reading multiple entries from that table regardless of the ORDER_FIRED differentiation, I tried temporarily modifying one of the '53' entries in the table directly and then the sec group was created just fine!
    I would like to know if anyone else has seen this? I've seen this on three separate installations now after deploying a second event listener onto those systems.
    /Lars Hammarberg
    //Lars Hammarberg www.connecta.se

    Hi Lars,
    yes I have seen the same issue. It is not related to April CU. I had the error before with SP1.
    It is not only an issue with the security groups. At least in our case nothing worked at all. No custom field editing, all Queue Jobs failing.
    For your case I suggest you consolidate your code in one eventhandler.
    Theory says that you can have more than 1 (up to 999) eventhandlers for one Event (http://msdn.microsoft.com/en-us/library/ms481079(v=office.12).aspx) but that seems not to
    work. Not sure, if it worked in earlier versions.
    Kind regards
    Christoph
    Christoph Muelder | Senior Consultant, MCTS, MCSE, MCT | SOLVIN information management GmbH, Germany

  • Insert several dates for the same event

    Hey guys,
    I have two tables joined. 1 with dates and venue, the other
    with speakers.
    How can I add more dates to the same speaker during his
    programme of appearance. i.e. Speaker A will be appearing for the
    following dates: 20/02/2007 - 27/02/2007 & 5/03/2007.....
    I was thinking of a Date fiels and a dropdown dynamic field.
    But I'm having problems figuring it out...
    Any help would be very much appreciated..
    Thanks

    Thanks Sabaidee,
    Please find below the whole code:
    <cfset CurrentPage=GetFileFromPath(GetTemplatePath())>
    <cfif IsDefined("FORM.MM_InsertRecord") AND
    FORM.MM_InsertRecord EQ
    "insert">
    <cfquery datasource="utcg302">
    INSERT INTO speaker (speakerName, venue, eventDate)
    VALUES (
    <cfif IsDefined("FORM.speaker") AND #FORM.speaker# NEQ
    "">
    <cfqueryparam value="#FORM.speaker#"
    cfsqltype="cf_sql_clob"
    maxlength="150">
    <cfelse>
    </cfif>
    <cfif IsDefined("FORM.Venue") AND #FORM.Venue# NEQ "">
    <cfqueryparam value="#FORM.Venue#"
    cfsqltype="cf_sql_clob"
    maxlength="50">
    <cfelse>
    </cfif>
    <cfif IsDefined("FORM.date") AND #FORM.date# NEQ "">
    <cfqueryparam value="#FORM.date#"
    cfsqltype="cf_sql_timestamp">
    <cfelse>
    NULL
    </cfif>
    </cfquery>
    </cfif>
    <cfquery name="rsInsert" datasource="utcg300">
    SELECT speaker.speakerID, speaker.speakerName, speaker.venue,
    speaker.eventDate, review.reviewID, review.review
    FROM speaker INNER JOIN review ON speaker.actID =
    review.actID
    ORDER BY speaker.eventDate
    </cfquery>
    <form
    action="<cfoutput>#CurrentPage#</cfoutput>" id="insert"
    name="insert"
    method="POST">
    <label for="textfield">Date</label>
    <p>
    <input name="date" type="text" id="date" />
    </p>
    <table width="200">
    <tr>
    <td><label>
    <input type="radio" name="Venue" value="Stoney" />
    Stoney</label></td>
    </tr>
    <tr>
    <td><label>
    <input type="radio" name="Venue" value="William Edwards"
    />
    William Edwards</label></td>
    </tr>
    </table>
    <p> </p>
    <p>
    <label for="select">speaker</label>
    <select name="speaker" id="Speaker">
    <option value="">Choose One</option>
    <option value=""></option><cfoutput
    query="rsInsert">
    <option
    value="#rsInsert.speakerID#">#rsInsert.speakerName#</option>
    </cfoutput>
    </select>
    <p>
    <label for="Submit"></label>
    <input type="submit" name="Submit" value="Submit"
    id="Submit" />
    </p>
    <input type="hidden" name="MM_InsertRecord"
    value="insert">
    </form>

  • How do i invite more than one invitee on different days for the same event

    Hi all,
    I basically want to create one event that occurs on several months with a group.  I know how to invite lots of people on one day but not several days.
    Please advise.
    Thanks

    hi Abbey!
    just checking. have you seen these user tips and KB docs yet?
    Natalie Beresford: multiple iPod/iTunes installations
    How to use multiple iPods with one computer
    iTunes: How to share music between different accounts on a single computer
    keep us posted.
    love, b

  • Sideways and Vertical displays different for the same song

    When I play music on my iPod touch 4th generation, the name of the song appears normally in the vertical position, but the first word is omitted in the sideways display. ("Awake And Alive" displays as "And Alive" when sideways.) How can I fix this?

    Hello Beverly,
    Thank you for the question.  I would be concerned too if I received two emails for the same purchase. 
    I suggest checking your purchase history in the iTunes Store to see if there are two separate charges listed for this song.  Use the steps in the following article to check your purchase history in the iTunes Store:
    iTunes Store: See your purchase history and web order numbers
    http://support.apple.com/kb/HT2727
    If you do in fact see two separate charges for the same song, you can report the issue to the iTunes Store using these steps:
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Find the full article here:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Multiple SCOM Alerts for the same unique Windows Event

    Multiple SCOM Alerts are being raised for a single Windows event.
    For e.g., below is the event :
    Date and Time: Description:
    12/15/2014 5:15:36 PM Initiating move for database 'xxxdb02' (FromServer=xxxdagnode1.dt.inc, ToServer=, MoveComment=<Null>)
    Log Name:
    Microsoft-Exchange-HighAvailability/Operational
    Source:
    Microsoft-Exchange-HighAvailability
    Event Number:
    306
    Level:
    4
    Logging Computer:
    xxxdagnode1.dt.inc
    User:
    NT AUTHORITY\SYSTEM
    Event Data:
    < DataItem type =" System.XmlData " time =" 2014-12-15T17:15:37.9848250-05:00 " sourceHealthServiceId =" 261D34BA-3596-ABCF-3728-B5A0AC035D90 " >
    < UserData >
    < EventXML >
      < UniqueId > 2014.12.15.05.15.35.285#9#xxxdagnode2#4d0ce477-5f5c-4304-8c59-292a4a8ca809 </ UniqueId >
      < DatabaseName > xxxdb02 </ DatabaseName >
      < DatabaseGuid > 4d0ce477-5f5c-4304-8b59-292a4a8ca809 </ DatabaseGuid >
      < ActiveServer > XXXDAGNODE1.dt.inc </ ActiveServer >
      < ActionCategory > Move </ ActionCategory >
      < ActionInitiator > Automatic </ ActionInitiator >
      < ActionReason > StoreStopped </ ActionReason >
      < AmRole > PAM </ AmRole >
      < PAMServer > xxxdagnode2.dt.inc </ PAMServer >
      < MountFlags > None </ MountFlags >
      < DismountFlags > SkipCacheFlush </ DismountFlags >
      < MountdialOverride > None </ MountdialOverride >
      < FromServer > xxxdagnode1.dt.inc </ FromServer >
      < TargetServer />
      < TryOtherHealthyServers > True </ TryOtherHealthyServers >
      < SkipValidationChecks > None </ SkipValidationChecks >
      < MoveComment > <Null> </ MoveComment >
      </ EventXML >
      </ UserData >
      </ DataItem >
    But three alerts were raised for this event.
    I double checked with the Unique ID for the Windows Event.
    Also the Duplicate alerts show the Same event in the 'Alert Context' field.
    My environment:
    3 SCOM 2012 R2 UR3 Management Servers.
    1 SQL DB Server
    Service Manager Connector is configured for Alert Sync. However this issue also affect the alerts that are not synced.
    Anybody else faced this issue?

    Hi,
    It seems like that you are using rule to monitor this event, unlike monitors, rules can continue to send alerts as long as the condition that caused the alert persists or repeats. Depending on what the rule is checking for, a single issue could possibly
    generate a huge number of alerts. To prevent the noise of too many alerts, alert suppression can be enabled for a rule.
    More details, please check article below:
    http://technet.microsoft.com/en-us/library/hh212847.aspx
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Marking duplicate opportinities for the same project

    Hi
    Can we mark duplicate opportunities for the same project??
    Regards
    Aakshi

    Hi,
    Pls go to, Enterprise mangaer --> Monitoring -> incident --> Search for the target and  select as "show all"  will give you alert details.
    Enterpise --> Monitoring --> Incident Manager: Search -->
    Last updated : Date Range:< >
    Target Name : D B NAME
    Target Type:<DB TYPE>
    Include members             : Target and all  member
    Status : Show both open and closed
    Supressed : Show all
    2)Please verify your notification setup
    Setup --> Incident Rules => Select your rule(will be in the alert) -->edit --> Select the event --> NExt --> Add actions --> edit
    Repeat Notifications
    Both basic and advanced notifications can be sent repeatedly. The repeat notifications will stop only when one of the following conditions is met: The incident is acknowledged, the incident has cleared, or the maximum number of repeat notifications has been reached. Repeat notification is not supported for corrective action job status updates and causal analysis status updates on events.
      Send Repeat notifications  --> Enabled?  if is enabled then  u will get repeated notification.
    OR if you set the frequency like 15 mins , 5 notification then u will receive  5 on every 15 mins if the alert persists.
    Regards
    Krishnan

  • TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    Sometimes deleting the account and then re-creating it can solve this issue
    Write down all the information in accounts before doing this
    Highlight the account on the left and click the minus button
    Then click the plus button to add the new account and follow the prompts

  • How can I use the same event case for different controls dynamically

    OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
    LabVIEW: Version 8.2
    I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
    Thanks for any help here.
    Regards,
    Johannes
    Solved!
    Go to Solution.

    Hi Johannes,
    collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
    Mike
    Attachments:
    Unbenannt1.PNG ‏11 KB

  • Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

    Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
    the incorrect entry? Adobe installed a very quick update today.

    They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
    You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
    * Shockwave Flash 10.1 r53
    * Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from the link in article below
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
    #* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Maybe you are looking for