Duplicate responsibility on end date
Hi,
We have EBS 11.5.10.2 on AIX servers. When I try to end date one responsibilty it ends but it duplicates and I can not end the new one. I checked metalink and found patch 5121512 which is superseded by patch 6241631.
I am a newbie and I dare not try to apply this patch which will be hard for me because of the prerequisite patches and mini-packs. So what I want is to learn which table(s) hold these user responsibility data and what will be the outcome if I directly delete this data? Is there any other non-patch workaround to this problem(any scripts etc.)?
I will be very grateful for any help. Thanks.
Burak
Hi,
I am a newbie and I dare not try to apply this patch which will be hard for me because of the prerequisite patches and mini-packs. So what I want is to learn which table(s) hold these user responsibility data and what will be the outcome if I directly delete this data?Do not update the tables directly as this is not supported. Instead, clone your production instance, and apply all the necessary patches on this new cloned instance, test the instance after patching and make sure all work properly, then apply the same patches on your production instance.
Is there any other non-patch workaround to this problem(any scripts etc.)?Log a SR and check with Oracle Support if there is any workaround you can implement to avoid applying those patches.
Thanks,
Hussein
Similar Messages
-
Duplicate responsibility if end date is applied on responsibility
Dear All
We are facing strange problem in Oracle Applications 11.5.9. When ever we apply end date to any responsibilty , it then duplicate the same responsibilty one with end date and the other is open, and user can still use the responsibilty.
Your help is really appreciated. thanks in advance
CheersYou need to apply patch (5121512) then run the concurrent request "Workflow user/role validation".
Refer to Note: 403385.1 for more details -
For disable any responsibility we are end date that from front end.
for disable any responsibility we are end date that from front end. what nay command from backend for disable the responsibilty.?
Refer the following thread
delete a responsability
Re: delete a responsability
Regards
-Mahesh -
QM Notification: task end dates not pulled through from response profile
Hello,
I am experiencing a problem with the end dates of the tasks in QM notifications not pulling through (from the response profile) when tasks are determined.
When I do the simulation of task determination, the gantt chart shows all the tasks together with the end dates. But when the actual determination is done these dates are not populated in the planned finish date fields.
I have double checked the configuration: priorities, response and service profiles are set up correctly. I have also searched SAP notes without success.
I thank you in advance for your responses.
Kind regards,
Theo.Yes, I know, but as far as I understand binding the values back from rule to the workflow is something that doesn't work. I have never tried it, but I have seen posts here about people complaining that this kind of binding does not work.
Have you tried to bind for example some hard coded value back to the workflow (something that should definately work)? Does it work? If not, I suggest you to ask this from SAP that is it supposed to work and if not, why do they have this option to for binding from rule to workflow. Or then just forget what you are trying, and use some of the suggested workarounds.
Regards,
Karri -
Hello Gurus,
I required a script which will check the END_DATE of the responsibilities assigned of a particular user.
Also how can I extend the END_DATE of the assigned responsibility from backend.
Please suggest.
Thanks-
Pokhraj DasHello Gurus,
I ran the below sql to check the end of any responsibilities.
=================
select a.USER_NAME, a.EMPLOYEE_ID, b.RESPONSIBILITY_ID, c.RESPONSIBILITY_NAME, b.START_DATE, b.END_DATE from apps.FND_USER a, apps.FND_USER_RESP_GROUPS b, apps.FND_RESPONSIBILITY_VL c where a.USER_ID=b.USER_ID and b.RESPONSIBILITY_ID=c.RESPONSIBILITY_ID
and user_name = UPPER('&user_name');
===========
From the above query NO END_DATE is showing so far/
But when I am checking from FROENT_END it is showing the responsibility end date as 10-Sep-2013.
Please help to fix the issue.
Regards-
Pokhraj Das -
How to end date a responsibility?
How to end date a responsibility from backend?can any body plz suggest
Sami,
Please check the other thread:
Delete responsibility from backend that is assigned to user
Re: Delete responsibility from backend that is assigned to user -
Can not do Surrogate bidding after Bid invitaion End date has been reached
We are on SRM 5 server 5.5
We are using surrogate bidding to capture bid responses and we manually receive vendors responses by the End date on the Bid invitation . We are unable to do surrogate bidding after the End date has been reached hence we then change the End date to a later date so that we can do surrogate bidding.
Is there a way that this can be done without changing the bid inviation end date ?
RegardsSAP standard you can not do Surrogare Bidding after the submission date
We are going to use Follow On documents -
Survey questionaire disappearing when updating the start date and end date to previous year
Hi Experts
When the start and end dates are updated to the previous year dates the questionaire is disappearing from the assignment block, is this a standard behaviour or this is a bug which needs to be raised to SAP.
Please advise.
Appreciate for a quick response as this is quiet urgent.
Regards
AMHi AM,
Check the SAP Note 1629777 - SVY: Survey becomes invalid if the from date < sysdate
This should resolve the issue.
Regards,
Gervase -
PROTOCOL_ERROR: Response contains no data
Does anyone have any ideas what could be causing this:
Sat Mar 24 15:06:49 2007 Found 1 servers
Sat Mar 24 15:06:49 2007 attempt #0 out of a max of 90
Sat Mar 24 15:06:49 2007 trying connect to PRIMARY '#commented out by hoos#'/xxxx/xxxx
Sat Mar 24 15:06:49 2007 INFO: New NON-SSL URL
Sat Mar 24 15:06:49 2007 Local Port of the socket is 58238
Sat Mar 24 15:06:49 2007 Remote Host #commented out by hoos# Remote Port xxxx
Sat Mar 24 15:06:49 2007 INFO: sysSend 573
Sat Mar 24 15:06:49 2007 parsed all headers OK
Sat Mar 24 15:06:49 2007 sendResponse() : r->status = '200'
Sat Mar 24 15:06:49 2007 PROTOCOL_ERROR: Response contains no data - isRecycled:0
Sat Mar 24 15:06:49 2007 *******Exception type [PROTOCOL_ERROR] (Unexpected EOF reading HTTP status - connection reset) raised at line 774 of ../nsapi/URL.cpp
Sat Mar 24 15:06:49 2007 Marking #commented out by hoos# as bad
Sat Mar 24 15:06:49 2007 got exception in sendRequest phase: PROTOCOL_ERROR [line 774 of ../nsapi/URL.cpp]: Unexpected EOF reading HTTP status - connection reset at l
ine 2562
I couldn't find any resolutions in the newgroups or toubleshooting patterns. I'll be raising a support case with BEA shortly in the mean time could this be an application issue or, as I think, more probably a problem caused by a network device?
I can see that the issue seems to be with a response being 0 bytes in size as the connection was reset.
This trace is from a test server under load but the WLS configuration is the same as the productin server which we believe to be under the same loads as we are testing. We do not see this issue on the live servers, but I'll be double checking the logs on the production servers anyway.
Hussein Badakhchani
http://dev2dev.bea.com/blog/hoos
London Middleware
http://londonmiddleware.org/index.html
Edited by hoos at 03/24/2007 9:44 AM<p>Jesus, thanks for the response. The wl_plugin version and build are: Build date/time: May 7 2004 10:16:34 Change Number: 381825, obtained from the wl_bridge.</p>
<p>I'm loathed to change the wlproxy configuration because it is the same as that used on the production servers and my understanding is that there is no issue on that environment. However its worth testing it as an experiment.</p>
<pre>
<IfModule mod_weblogic.c>
WLProxySSL ON
Debug ON
DebugConfigInfo OFF
DynamicServerList ON
WLLogFile /var/log/xxxxx/apache/wlproxy.log
FileCaching OFF
ErrorPage http://noservice.htm
ConnectTimeoutSecs 180
WLSocketTimeoutSecs 180
WLIOTimeoutSecs 300
ConnectRetrySecs 2
Idempotent OFF
</IfModule>
<p>What is odd is that browsing to the bridge sometimes ends up with the application error page being displayed rather than the bride. This seems to be consistent with proxy log error messages.</p>
</pre>
<p>
Hussein Badakhchani
London Middleware
</p> -
Modelling Time Dimension with Fact Table containing Start Date and End Date
Hi Gurus,
I have a time dimension with Year till Date. I have a fact table which consists of Start Date, End Date, Person ID, Department ID.
How do i design Time dimension with fact table the below scenario
In the dashboard i have start Month and End month as prompts.
In the report i need to display Count(Person ID) > Start Date and < End Date along the trend.
For instance, i have selected Jan-2009 as start date and Apr-2009 as End Date, then i need to display Count(Person ID) of Jan-2009, Feb2009, Mar-2009 andApr-2009.
I Can not connect Time dimension with only Start Date or only with End Date to get the trend along the months.
Please advice on the issue which i am having.Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks -
Define the start and end dates of an assigned academic period in fee calc.
Define the start and end dates of an assigned academic period
Message no. HRPIQ00ACCOUNTING132
Diagnosis
The academic calendar assigned to the top organizational unit does not contain a start or end date for the academic period (academic year and session) assigned to fee calculation period Z000.
System Response
The system will skip fee calculation period Z000 and continue processing with the next fee calculation period.
Procedure
1. Check which academic calendar is assigned to the top organizational unit.
2. Check which academic period is assigned to fee calculation period Z000. You check this setting in Customizing for Campus Management in the IMG activity Assign Academic Years and Sessions to Fee Calculation Periods.
3. In this academic calendar, create the start and end dates of the relevant academic period using standard time limit 0100 (standard duration of academic period) or a corresponding user-defined time limit.
For more information, see
Define Top Organizational Unit
Define Mandatory Time Limits for Academic Calendar
please give me the needful information to solve this problem.
Regards
Arun RaiArun,
Have you looked in the Student Accounting Cookbook
http://www.sdn.sap.com/irj/scn/advancedsearch?query=studentaccountingcookbook on page 13?
Page 1-18 will help you setup the Oranizational unit, the academic calendar and the modules.
Bev beck -
SAP CRM Tables and Fields for Contract start and End dates
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Tejacorrection
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi = CRMD_ORDER_I-GUID AND
OBJTYPE_HI = '06'
OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora -
IT 581 not taking end date except 31.12.9999
PA 30>IT 581>Create
start date is 01.04.2012
If end date is 31.07.2012
System not considering date before 31.12.9999.
System showing following error-
End date before leaving date (31.12.9999)
Message no. PG211
Diagnosis
The end date entered falls before the employee's leaving date (31.12.9999).
The infotype has time constraint 1. This means that it must always be available during the employee's activity (employment status other than 0)
System Response
The infotype operation cannot be carried out.
Procedure
Control the validity period of the infotype record currently being processed and the employee's employment status in the Actions (0000) infotype for this period.Dear Sarika,
Info-type 0581 works as the start date as the hiring date or the date your are opting for HRA exception with the end date as 31.12.9999. When you create another record from a particular date it will delimit the old record and create a new record from that date to end date 31.12.9999.
It is not different for different PSA, might be there is another record which will be valid after the end date you are trying to give. But the end date will always be 31.12.9999 till the record is delimited or the person is terminated.
Regards,
Prateek -
Query to end date all reponsibilities of a user
Hi,
One of the user in our 11i has around 120 responsibilities. I wanted to end date them at a time. If you do have a query, pl post here.I agree with Kevin, try to avoid updating FND tables and use APIs instead.
Note: 394784.1 - Is there a Stardard API Which Can be Used to Disable or End Date a Responsibility?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394784.1 -
SQL Query to put end date to user account from Backend.
We are using Oracle Apps 11.5.10.2. with oracle 9i Database.
I want to put end date to user account who has left a week ago, (Responsibility ->Sysadmin - Go to : User)
i cannot give the enddate as sysdate, i need to put the end date (25-JUN-09) from back end.
I want a query so that the workflow tables also get updated accordingly.
Regards,
JennyYes i can give the back dated end date, but when i check the record history from Front end,
(Help ---> Record History) These details are not updated , they will show the Updated By : username and Updated Date to sysdate and not the back dated date given.
Maybe you are looking for
-
Warning while opening a report
Hi I am getting a warning while i try to execute a report. The warning says "warning following error for partial InfoCube = 0PCA_C01 in RSDRC_CUBE_DATA_GET_RF, Error SQL Error:1578" Can any one tell me what the issue is and the possible solution ? Re
-
Websites loads pixelated images in firefox after update to version 23
After firefox updated to version 23 blogs that have image is loaded pixelated. I'm on windows 7. I tried every solutin I seen: open firefox in safemode ; deselect the "Use hardware acceleration when available" box ; also the page basic style didn't h
-
No curser in find window (command f)
Hi, When I use command f, the pop up window has no cursor or blinking type position marker. I can type in a search term but cannot edit or highlight the term I type in the window except with delete key. Ideas?
-
hi FOR CONSIGNMENT PROCESS FOR CONSIGNMENT FILLUP AND CONSIGNMENT ISSUE INSPECTION LOT IS CREATED? BUT THE STOCK WILL NOT BE THERE IN CONSIGNMENT ISSUE STAGE REGARDS
-
IMAP Mail Setup with self-signed SSL certs
I am unable to set up IMAP access to an email account of mine on the new iPhone mail app. The setup stalls at "verifying" and I can't seem to save the info entered and then disable SSL in the advanced setup. Also, it doesn't seem possible to install