Duplicate Routing with dependencies

Hi all,
I'm trying to copy a Routing changing the Application (VERWE = 'C' instead of '1')
I'm using the FM CARO_ROUTING_READ to take the original Routing and then call FM BAPI_ROUTING_CREATE passing tables TASK, MATERIALTASKALLOCATION, SEQUENCE and OPERATION .
It works fine: duplicate all from the original but it doesn't copy the dependencies allocated in every single operation inside the routing.
Anyone have an Idea to copy these dependencies? maybe another FM, Bapi, or doing a select from a table? which one?
Thanks!
Best Regards

check the post:
BOM and Routing with Dependencies
-Murugesh AS

Similar Messages

BOM and Routing with Dependencies

Hi,
I have created BOM,Routing and dependencies.
I know we can link BOM and dependencies using BDC programming.
MY QUESTION : Is there any FM or BAPI which does link BOM and dependency & routing and dependencies where it takes Material,component and name of the dependency and link directly to respective BOM's and routings.
I would appreciate any inputs.
Best Regards,
Mark

Hello,
Please check the following DI Program/LSMW:
0170/0001/RCPTRA01/B
and the Structure BIPMZ would allow us to link the components to an Operation.
Also the BAPI: BAPI_ROUTING_CREATE
and structure: COMPONENTALLOCATION
Hope this helps.
Best Regards, Murugesh AS

[SOLVED] Routing with OSPF

Hello,
I'm running Arch linux on my server since ... 1 year. Now, I will need dynamic routing with OSPFd, for exemple ... but not package are available for zebra/quagga/ospf ... What should I use ???
What software are "up-to-date" regarding network routing with dynamic protocols ?
Thanks
Last edited by loopx (2011-11-01 15:58:16)

I'm trying to install it ... and :
[loopx@serveur yaourt]$ makepkg
==> Making package: yaourt 0.10.2-1 (Mon Oct 31 18:13:29 CET 2011)
==> Checking runtime dependencies...
==> Missing Dependencies:
-> package-query>=0.7
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
... so, how can I use AUR if I need AUR to use it ... haha
EDIT: and with another way :
[loopx@serveur yaourt]$ makepkg -si
==> WARNING: Sudo can not be found. Will use su to acquire root privileges.
==> Making package: yaourt 0.10.2-1 (Mon Oct 31 18:17:51 CET 2011)
==> Checking runtime dependencies...
==> Installing missing dependencies...
Password:
error: target not found: package-query>=0.7
==> ERROR: 'pacman' failed to install missing dependencies.
Ok, I see what should be done ..
Last edited by loopx (2011-10-31 17:20:39)

Routing Object Dependencies ALE.

Hello Everybody,
I need to copy the Routing Object Dependencies from one client to another.
I think that we need to use ALE for that.
Can someone tell me if that is possible and if it is ,
give me the detailed steps to show me how to do that?
I need it very soon , please help me with that.
Full marks assured.
Thanks,
Sneha Singh.

Hi,
Actually the Basis guy can help u in this matter boz i don't have that much detail information in ALE
Basis guy can help you . but i want to give u advice that fetch the data from system for that go to SE16 give the name of Routing table & tick on field which ever u want from system
try in this way it is fast & secure then ALE.
Thanks
shiva

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhone NO

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhones and it cuts in and out.. Drops from 3 wifi bars to 1

I am having the same problem with brand new Ipad Mini at my house.
It connects to the WiFi fine - but will not pull an IP address in DHCP mode, or if I set all the IP info statically - it still will not get any network access.
This doesn't look like a WiFi issue, as it does connect and is seen by the WiFi Access Point. All the normal WiFi fix stuff doesn't help.
- Using a Dlink DAP-2553 which is less than 2 months old.
Other devices connect fine, including Ipad 2.
This same Mini worked fine at another house and also connected to a mobile hotspot fine....so seems to be some weird IP issue with maybe this Access Point or maybe the older Router that I have (older Netgear)?
I am actually a network engineer and still have not been able to find a solution. Both the Ipad Mini and the Dlink WAP have the latest firmware loaded.
Wondering if anyone has found a solution to this problem.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

How to extend a wifi network of third party router with TC 4th generation?

After searching the communities for a while, I did not find a definitive answer on the following question:
- I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
- This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
- This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
- The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
- There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
I really would appreciate suggestions
Bram Bos

gilles13 wrote:
I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
Airport can not be used to extend a WiFi created by a non-Apple box.
You need to turn off the radio in the router (shut down the existing WiFi). Purchase TWO Airport Express units. Connect one to the router with an Ethernet cable. Configure that one as your primary WiFi network and then use the second Express as the extender.
You need to locate the second Express where it receives a decent WiFi signal. Too far away and it has nothing to extend. Too close and it doesn't buy you anything. Before you plug in the second Express, check to see where the primary WiFi disappears completely. My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
If you use Airport Utility to configure the units, it's a snap. In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

Can you use an external antenna with the 4G LTE Router with Voice?

I live in a black hole of cell service - very rural, in a valley surrounded by trees, no DSL, no cable, no other options except satellite internet which I did for 15 years and will never do again. My current data setup is a Pantech UML290 USB modem connected to a Cellphone-Mate full band outdoor Omni 3G/4G antenna on the roof. I just ordered an amplifier to boost the 4G LTE connection. The modem is plugged into a Cradlepoint MBR900 router, which then provides my home internet (way more than 10 devices, and mostly wired).
Is there a way to add the antenna and amplifier setup to the broadband router with voice so I can be assured of the signal? If so, could I then use this router to feed the Cradlepoint and continue using multiple wired devices?
I was set to order this router last night, but the CSR through chat told me that you cannot attach antenna to the router with voice - only to the one with data. This really doesn't make any sense to me, but she was firm about it. If I can attach, can I use the cables I have or will I need a different adapter?
There is so little information about this particular router. My current setup is doing fairly well, but I would love the option to drop my landline and increase signal strength for both voice and data. With no antenna, the modem gets around -125 db, and can't connect at all. With the antenna mounted on the roof, and routed through the Cradlepoint, I consistently get -85 db. 4G LTE speeds are around 15-19 Mb/s down and very inconsistent 2.5-4.0 Mb/s up. However, the 4G drops and resets multiple times a day, so I usually sacrifice the speed to get a more stable 4.5-5 Mb/s down and 0.5 Mb/s up through forced 3G.
Voice calls are spotty if received at all, and frequently drop immediately if there is any connection. And of course, the data limit has been a nightmare. I could potentially save some money by porting my landline to Verizon, but not if there is no way to boost the signals. The Omni antenna will boost all, but not sure if there's any way to route the existing antenna setup to feed both the voice and data sides, or if it would be enough to allow me to do this. This router also says it's 4G LTE only, but the specs on the antenna they sell say it boosts 3G for failover, so not sure if it will grab anything else. Any help or advice GREATLY appreciated! Thanks for reading through the whole thing.

No, not directly. You would need to transfer your data from your iPad to your Mac and then back it up to an external drive.
Pete

Frustrated - Can't connect to router with laptop after disconnect, other devices work fine.

I have a RevI Actiontec router with dual antennas(not sure of firmware as I am not at home). My wife can be on her laptop all day, then when I come home with my IPad, it make her lose connection to the router. The router still connects to my iPhone 4 and iPad (both with iOS 6.0.1), but she is unable to connect to router at all. Everything continues to function normally on my Apple devices, so we are still connected to the internet. I have a laptop as well, and when this is happening, both of the laptops stop connecting, but the apple devices and our Toshiba TV and BluRay players continue to function normally. As a temp fix, I disconnect internet from my iPad and restart the router. It works until we try to run both at the same time.
I am mildly computer literate, though I know little about network setups beyond security, MAC filtering, and other slightly advanced setup stuff.
This is really frustrating and seems to be getting worse. We used it like this in our new house for several months before this started happening.

Also check to make sure neither of the devices are set to use a static IP address.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

Wireless Router with USB + External Hard Drive = Time Capsule?

So I bought a TP-Link WR710N wireless router http://www.tp-link.com/en/products/details/?model=TL-WR710N which seems to support external storage in its USB port. I tried with various storage media and it kinda works. The bad thing is that it only sees NTFS drives. I tried an external hard drive formated for Windows and a USB stick, also formated for Windows and it discovered them. But when I tried my external hard drive which is formatted as Mac OS Extended (Journaled), which I was using for Time Machine, it couldn't see it. Neither the TP-Link software, nor the Time Machine software.
Is there any way I could use this router with this hard drive for wireless backing up with Time Machine NOT buying extra equipment (NAS, AirPort Extreme or Time Capsule) ?
Thanks.

m3adi3c wrote:
Is there any way I could use this router with this hard drive for wireless backing up with Time Machine NOT buying extra equipment (NAS, AirPort Extreme or Time Capsule) ?
Thanks.
No
Take it back and get a Time Capsule or keep it and buy a regular external drive and connect it to the Mac directly.

Duplicate record with same primary key in Fact table

Hi all,
Can the fact table have duplicate record with same primary key . When i checked a cube i could see records with same primary key combination but the key figure values are different. My cube has 6 dimentions (Including Time,Unit and DP) and 2 key figures. So 6 fields combined to form the composite primary key of the fact table. When i checked the records in se16 i could see duplicate records with same primary key. Ther are no parallel loading happening for the cube.
BW system version is 3.1
Data base is : Oracle 10.2
I am not sure how is this possible.
Regards,
PM

Hi Krish,
I checked the datapacket dimention also. Both the record have same dimention id (141). Except the Keyfigure value there is no other change in the Fact table record. I know this is against the basic DBMS primary key rule. But i have records like this in the cube.
Can this situation arise when same records is there in different data packet of same request.
Thx,
PM
null

Duplicate Routing with dependencies

Similar Messages

Maybe you are looking for