Duplicate Software Components Showing Up in XI

Hello,
While trying to do some maintenance, I deleted our main product from the SLD.  I then recreated the product and the software components that belonged in that product.  I then re-imported these software components into the Integration Builder.  Now I have two of each software component showing up in the system.  Does anyone know how I can correct this?
Thank You.

Refer the following help for
SLD preperation very good:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
Working with System Landscape Directory (SLD) :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak:
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
XI Software Logistics 1: SLD Preparation:
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Thanks,
Kalenthirababu.p

Similar Messages

  • Summary report to show all the software components and version installed

    We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
    Thanks!

    Refer steps here to delete SC file.:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

  • Message interface does not exist in any software components

    Hi masters,
    I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
    note: I have read all the posts about this problem but nothing has solved it.
    I will describe more or less how is my SLD.
    First all, my Technical System is an Web AS ABAP (non a third party).
    I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
    I have checked the GUID, and that's good.
    NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
    Regards and thanks

    did you mean:
    SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
    if is this, I have already done this, and still doesn't works.
    Thanks

  • Product version inconsistent with software components

    Hi,
    after upgrading our sandbox from 4.6C to ERP 6.0 EHP4 SP06 i've changed the product assignment in SMSY and fetched the new data using "Read System Data Remote". Now there are two problems:
    1.) Read System Data Remote shows error message S:032:000 trying to fetch data using RFC. No more explanations or long text. Although data is been read and updated and RFC test connection is ok.
    2.) The related system shows exclamation mark "Product version inconsistent with software components". The product version is SAP ERP 6.0, Product Instance is SAP ECC Server.  Now i tried "Change Product Assignment" and "Clean-Up Inconsistencies".  This results in a list of "Inconsistent Database Assignments" like "Product: SAP ERP" and "Product Instance: SAP SRM-Server". Nothing i can change here. I'm confused as i haven't defined SAP SRM-Server anywhere just SAP ECC-Server.
    Any ideas about 1.) or 2.)
    It seems to me that Solution Manager doesn't make life easier in the first.
    Thanks.

    Miguel,
    i have checked note 1165438 but can't see how this should help. The technical usage is correct and there is only one specified which is ECC / Central Applications. Still SMSY complains about SAP SRM-Server and more.
    Let me say that the system was defined as 4.6C before the upgrade and that we used Solution Manager to download all required packages for ERP 6.0 EHP4 SP06 which worked fine. The problem is as said before that after changing the product version to ERP 6.0 there are inconsistencies shown on the product assignment page (inconsistent database assignment) for SAP SRM-Server, SRM-Catalog, cProject Suite, Workforce Management, E-Recruiting, NW-Business Intelligence, NW-Process Integration, SEM, SRM-Server ECC AddOn, SRM Catalog Content, NW Mobile Infrastructure, FSCM-FSCM Server (ABAP), Application Platform-IPC and Learning Sol-Frontend ABAP. Never heard about them nor specified them anywhere.

  • Duplicate software inventory records ....

    I am getting duplicate software inventory records for the same machine in the MAP 9.0 database. I was under the understanding that once a machine was successfully scanned, additional inventory records
    for that machine would not be added during subsequent scans.
    After 4+ scans, we are seeing the same software title show up multiple times on the same machine.  For example, using
    the product name of Microsoft Office Professional Plus 2010 as an example, I get a count of 405.  But there is only about 250 unique computer names with this product.  Some machines are listed twice, some triple, some quadruple just for this one
    product (even if the ProductVersion is identical). We did 4 scans of the network in order to capture all machines, including any that hadn’t been inventoried.  So I’m not sure why it captured some machines more than once and others only the one time.

    Question: just to confirm, the de-duplication process (for generating standard pre-built reports/worksheets) in MAP 9.0 will NOT remove machines with different hashes, correct?
    Correct
    Question: does the issue you raise have anything to do with doing an AD only scan then an IP one (or the reverse) or would just a combined one (AD and IP) also lead to similar issues?
    If you use one discovery method on the first inventory scan, then use a different discovery method that does not include the host name, such as IP address, on a subsequent run, it is possible that you will see duplicate results, although I've found it to
    be less likely.
    Question: Is any inventory data populated in MAP 9.0 for a machine that does not "successfully" complete its scan?
    If you use the AD DS discovery method, then MAP will populate some information, such as OS, from fields in the AD object properties.
    Question:
    >> I need to point out that any device with a WMI status of anything
    >> other than success cannot be de-duplicated, so it will show up regardless.
    Can you be more specific.  Where will it show up? (i.e. in which MAP reports)?
    The Inventory Results report has a list of all host names discovered. If IP discovery was used, then any IP address that had something connected to that IP but MAP was unable to establish a connection to will show up with the IP address for the computer
    name in that report as well. There are several other reports throughout the tool that display machines for which MAP failed to connect, but the Inventory Results report is what I was referring to specifically.
    Please remember to click "Mark as Answer" on the post that helps you, and to click
    "Unmark as Answer" if a marked post does not actually answer your question. Please
    VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

  • IPad 2 deleted all of my contacts, when I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!

    When I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!

    Recover software as you have described is pretty much your only option - keep in mind that if wait, some of the currently recoverable data may well be over-written and lost.

  • HT202879 I am stumped - trying to open a recent Pages file but error message says that I need a "newer version" of Pages.  My software updates show that there are no updates available.  I recently updated Pages but it is not consistent.

    I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages.  My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 95 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Error while trying to import Software components from SLD.

    Hi Gurus,
    Need Help.
    When we are trying to import Software components from SLD we are getting following error. Could not read list of software component versions from SLD. In Description  i am getting following two points.
    1. Could not read list of software component versions from SLD (COULD_NOT_READ_SWCV)
    2. User credentials are invalid or user is denied access
    We have tried following
    1. LCRSAPRFC and SAPSLDAPI are working fine.
    2  SLDAPICUST is ok
    3. In nwa connections are available for LCRSAPRFC and SAPSLDAPI.
    Request you to let us know how to resolve this issue.
    Thanks in advance.

    Hello ,
    Can you check below roles assigned to the user id?
    SAP_SLD_CONFIGURATOR
    SAP_SLD_DEVELOPER
    SAP_SLD_ORGANIZER
    Thanks

  • Message interface does not exist in any software components installed on th

    Message interface does not exist in any software components installed on this business system.
    hello,
    When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
    I have deleted the business systems and the technical system and created them again, but no result.
    The product and software componets are in the technical sytem and business systems.
    Any help would be usefull.
    thanks,
    Job

    Hello!
    If someone will search in the future for this error, here is the solution:
    The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
    The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
    Kind regards,
    Klaus

  • Message interface does not exist in any software components installed

    "Message interface does not exist in any software components installed on this business system"
    Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
    Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
    Tive que configurar o XPath na mão para todas as SEFAZes!!!
    Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
    Alguém já possou por isso?!?

    para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
    (SENDER)
    <?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
    (RECEIVER)
    <?xml version="1.0" encoding="UTF-8"?>
    <nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

  • Software update show this: error NSURLErrorDomain -1100 and won't work

    Today I'm looking for updates in OS X and Mac App store show me "error NSURLErrorDomain -1100". Can you help me with this??? A lot of thanks!!!

    Software Update showed the iTunes update.
    Could you install the update?
    I was able to download the iTunes 10.7 update just now successfully.

  • Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    Hello Everyone,
    I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
    Please send me a feasible solution to this problem.
    Thank You.

    Uninstalling the iCloud control panel should allow you to do that folder deletion.

  • I try to restore my iphone 4 software it shows unkown 16 errpor

    i try to restore my iphone 4 software it shows unkown 16 errpor

    Hello jijojohn,
    After reviewing your post, I have located an article that can help with devices that need to be restored. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    If you can't update or restore your iPhone, iPad, or iPod touch
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
    Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Duplicate software componentn in Integration Repository

    Hi Experts,
    I have a scenario here in which I was trying to move my objects in Integration Repository from dev to prod by simply exporting it. I have done exporting all objects by choosing " All objects of Individual Namespaces ".
    Now, my problem is when i successfully Imported my objects to production. It does not update the existing Software component version where my object is located, but instead, it creates a duplicate Software component containing the same Software component version and namespaces(old-running in production and newly created objects).
    I haven't activated this yet, beacause I was trying to delete this, but whenever I try to delete what I have imported, it says that the old namespace would be affected since they have the same namespace in which this is already running in production.
    Do you have any idea how can I delete what I have Imported, our Go-live would be next week. and also how will I export my objects in dev, without duplicating it in prd.  Thanks in advance.

    Hi,
    I hope you  can try " Reject Changes" if didn't activated the SWCV. Else for deletion, you can use below weblog.
    /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
    Secondly have a look into below document for consistent changes for SWC while transporting,
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/adb8f911-0d01-0010-82b9-a8134d7d89d5?quicklink=index&overridelayout=true
    Regards
    Aashish Sinha

  • Error - "Message Interface does not exist in any software components"

    HI
    This is an Idoc sender - SOAP receiver scenario.
    When I try to create the receiver determination, I get a warning message -
    " Message interface does not exist in any software components installed on this business system"
    I checked all the usual things & also reimported the IDoc metadata.
    Any suggestions are appreciated!
    Thanks
    Rachana

    Hi Rachana !!
    You should also check  if the given idoc type in mapping is the same that in the WE20.
    Also try to reactivate your integration directory objects by making any dummy changes.
    Check your receiver business system (I mean XI), that the logical systems are ok.
    Check this document (page 31):
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
    Regards,
    Matias.
    Message was edited by:
            Matias Denker
    Message was edited by:
            Matias Denker

Maybe you are looking for