Duplicate Warning message

Upon saving a document SAP warnings that a simular document with the same customer/vendor reference number already exists. (by this stage the person keying the document may have spent 30 mins keying in a large document).
Is there a way to set up functionality so that a warning message occurs earlier?

Possibly could achieve this with the B1 Useablility Package Add-On... have to check if it can activate a message box after query when leaving a field.
Or a cheaper, but not as effective, way around it may be to add a UDF with a formatted search running a query to check for a duplicate ref no for that customer that is activated once you leave the reference number field, and have it return something like 'DUPLICATE' if it exists, the user would then need to check this field.

Similar Messages

  • A/P Invoice Entry - Duplicate Invoice Error vs. Warning Message Control

    In configuration, the duplicate invoice message has been defined as an error instead of a warning.  This affects all invoice entry dialog transactions.  Is there a method  or approach to change only transaction F-63 Park Document so the message is a warning intead of an error?   Thxs.

    Hi
    we have to activate certain setting in MM.
    Step - 1
    SPRO - MM - Logistic Invoice Verification - Incoming Invoice - Set Check for Duplicate Invoices - Activate Check box for reference field.
    Step - 2
    In Vendor Master XK02/FK02 goto Payment Transaction & click on check box - Check double Inv
    Step - 3
    There is also a Std Report for checking the invoices for which same reference feild was given
    S_ALR_87012340
    Hope its useful, give if found useful
    Regards,
    ram

  • How to Capture warning message in SHDB recording

    Hi SDN,
    I am getting problem in Recording FB03 through SHDB.
    when i am clicking on save as complete button i am getting a warning message as duplicate entry.
    when click on enter button the actuval object got saved bu from recording it is not captured.
    how we can continue with this

    Hi
    Sorry
    i know that
    i don't want to display messages.
    when i am recording a Transaction code.
    i am getting a warning message as check for duplicates.
    when click on enter button that warning message is got disappiared but that enter click is not recorded in FB03 recording.
    when i process that recording it is stopping that transaction code at that warning message in BDC.
    please suggest

  • Warning message while posting Credit Memo.

    Hi Guru,
    Currently the Invoice shows a soft warning message if a same number
    in Reference field (XBLNR) is used to post two different inovices.
    the client wants the same kind of Soft message to be appeared in case of a same number is used in the Reference Field when Posting credit memo. I think the check shd be against Accounting Doc right??
    Incase of invoice we have a check for duplicate invoice in SPRO and we can maintian it..
    What about credit Memo??? we do have any config...to my knowledge we need technical development.
    In Se91 i will go and create new Message and assign it to M8(Message Class for invoice)........and do assignments in OBA5
    Now the soft warning msg can be achieved only by calling this msg in ABAP Code right??? can be done thru Config..?????.
    if any other details if i need to know please do let me know.....or anyother suggestions....to achieve this,,,
    Is it a Config or Developement ???
    Thanks for the support
    Balaji

    In OBA7 if i check the "Reference number" that means while entering the document the reference number is compulsory field.
    and in vendor master i already checked the docueble invoce check that is why while posting KR it is giving the warning message.
    Regards,

  • Warning message on creation of IT0105 records

    When I create a IT0105 record, subtype 0004 (phone number) for example and enter a phone number that already exists on another record I get the following message
    ID/number already used for Person number nnnn.  This is a warning message and I can return through it.  Is there a way to make this message not display?  I am trying to create records in IT0105 via a dynamic message and even if I use the /D in the dynamic action to perform the action in the background I still get the "ID/number already used for Person number nnnn" displayed.  I do not want the message to display in the dynamic action so I would like to know if there is a way to suppress this message in all cases.

    David :
    The checking for duplicate values in IT0105 is done in PAI 'CHECK_USERID' (include MP010530), and is not configurabled (i.e. hard-error if subtype is '0001', warning if different subtypes). Therefore, I don't think you can suppress the message, unfortunately.
    Rgds.

  • Getting warning message in my webmail after upgrading to snow leopard

    Hi,
    After upgrading to Snow Leopard Server, I'm getting strange warning messages in my web mail,
    Find the warning messages below, Looking forward to your support.
    Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 420
    Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 95
    Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 347
    Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 289
    Thanks,
    Gulab Pasha

    The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
    SL may have taken the initiative and quarantined what it determined were borked fonts and put them aside to avoid calamity.
    Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
    That said, rumor has it that the next update will correct some spurious font handling....best to wait if housecleaning doesn't help at this time.

  • Weblogic Message Bridge Producing Duplicate JMS Messages

    We have a message bridge that we use to integrate with TIBCO. The message bridge is deployed on a WL cluster. We see duplicate JMS messages produced by the bridge when it is deployed on the cluster. We don't see this behavior when only one ManagedServer in the cluster is active,.
    TIBCO version: 4.4.3 V5
    WLS: 10.3.3 with patch for bug BUG8732539 (BQC6)
    java -version
    java version "1.6.0_17"
    Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
    Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2121-linux-x86_64, compiled mode)
    We are also seeing a lot of exceptions related to
    <May 27, 2011 4:11:57 PM PDT> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
    However the bridge is active. We are monitoring the message-out count on TIBCO and we observed that we see duplicates whenever there a message is re-delivered. We opened a case with Oracle support and they suggested patch 10258751 which didn't help. The next suggestion was a patch for "Bug 11852771 - [WLS10.3.2]MISSING AND DUPLICATE IN JMS QUEUE MESSAGE MONITORING" but I don't think it will help since our JMS consumers are getting duplicate messages and this is not just a UI issue.
    Here is the message behavior when we send a single message:
    Timelines
    11:34:17 --> Message sent to TIBCO EMS queue
    11:34:17 --> WL MS3 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:17 --> WL MS1 says it got the message and committed the transaction
    11:34:17 --> Message is visible in the JMS queue in the admin console
    11:34:17 --> TIBCO EMS has still not received an ACK from WL for the message
    11:34:31 --> TIBCO EMS resends the same JMS message to WL
    11:34:31 --> WL MS2 says it got the message and committed the transaction
    11:34:31 --> WL MS1 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are two messages in the JMS queue)
    11:34:31 --> TIBCO EMS has still not received an ACK from WL for the message
    11:34:54 --> TIBCO EMS resends the same JMS message to WL
    11:34:31 --> WL MS4 says it got the message and committed the transaction
    11:34:31 --> WL MS2 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are three messages in the JMS queue)
    11:34:31 --> TIBCO EMS receives an ACK from WL for the message
    MS04
    ####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: true
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-6A59E8FE76C4FC4CA149
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <MS04> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<193654.1306521294611.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    MS03
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257342> <BEA-000000> <Bridge MessageBridge1 Successfully got connection to the target destination>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1: both source and target adapters support XA = true>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 supportsMDBTX = false supportsXA = true async = true>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 WorkMode = Exactly-once>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntimeVerbose> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 Entering processMessages() ------ >
    ####<May 27, 2011 11:34:17 AM PDT> <Error> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-3AA29116A4CA622834EA> <> <1306521257343> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
    at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
    at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:200)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
    at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
    at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    ... 8 more
    ).>
    ####<May 27, 2011 11:34:17 AM PDT> <Warning> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257344> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    .)>
    MS02
    ####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271386> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: true
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-679AF074F381152F047C
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271392> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<196075.1306521271386.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:54 AM PDT> <Error> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:225)
    at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    ... 2 more
    ).>
    ####<May 27, 2011 11:34:54 AM PDT> <Warning> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    MS01
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257536> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: false
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-72BC818FE2BB8C2655C6
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257542> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<195581.1306521257536.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:31 AM PDT> <Error> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
    at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    ... 1 more
    ).>
    ####<May 27, 2011 11:34:31 AM PDT> <Warning> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    .)>

    @Tom, thanks for your hints and sorry for my delayed response. Here are my answers to your queries…
    -- Does messaging work, without any exceptions, when only one bridge is active?
    It works fine when only one node of the cluster is active. -- I'm not familiar with Tibco monitoring, but I suspect that the "message-out count on TIBCO" stat doesn't always imply that there's a duplicate message. It could mean that an initial message delivery attempt failed, it's transaction rolled back, and the message was redelivered. Redelivery after a failure is normal - the original delivered message, if one actually made it onto a WebLogic queue, should be discarded by WebLogic when its failed transaction eventually rolls back (before its ever handed to a consumer application).
    You are absolutely right. The mismatch in count was due to redelivery attempts. We could see that as soon as we turned on trace in TIBCO-- The posted stack traces look like they may be JVM stdout/stderr scrapes, which are often automatically truncated, for example, see the "... 8 more" listed at the bottom of one of the stack traces below. There might be more information in the full stack trace for the "Resource manager is unavailable" exception. Full traces are logged in each WebLogic Server's log files.
    I tried redirecting the output and even set "stdout Stack Trace Depth:" to -1 but I am not albe to see the complete trace.-- The setTransactionTimeout NullPointerException error message looks like it is collateral damage from the original reported "Resource manager is unavailable" exception that's thrown earlier during the enlistResource() step. If you are truly getting duplicates, then I think this is a clue that the bridge is somehow (stupidly) trying to proceed with forwarding the message despite the fact that there's no current transaction on the thread...

    I have a case open with Oracle support and we have extensive debugging turned on. Here is what the engineer came back with. There is an issue with XA transactions in JCA adapter when it talks to third party providers like TIBCO. Since the resource names are not unique across the cluster, a XA transaction is started on multiple nodes in the cluster for the same message. All transactions abort but the message is persisted and TIBCO redelivers the message since the connection is severed when the transaction aborts. We were able to reproduce this scenario at will with our setup and Oracle was able to reproduce the issue too. 
-- Can you check the state of the message on the WebLogic Q? The fact that a message is shown on the WL console doesn't necessarily mean that the state of the message is visible (it could be waiting for the transaction to commit - something that apparently never happens). On the console: Services -> Messaging -> JMS Modules -> [module name] -> [destination name].

    Our consumer was getting duplicate messages. This confirms that the console was not giving us incorrect information. The console showed that 2/3/4 messages were in "current" state when we expected only one message.
-- Make sure that the bridge's Tibco destination is a Tibco queue not a Tibco topic (it's happened).

    Yeah we made sure it was a Queue.
-- Can you post your bridge and destination stanzas from your config.xml? 

    Will try to do this shortly but have to strip out lot of information.
-- I vaguely recall that there was a problem with untyped connection factories in Tibco at one point (not sure). You might want to try changing the Tibco configuration to spin-up "XA Queue Connection Factory" instead of just an "XA Connection Factory" (plus modify the bridge configuration accordingly).

    We tried this but it didn't eliminate this issue. One thing we did notice however was that the number of rollbacks were greatly reduced.

    Here is the workaround that Oracle is suggesting: Create pinned destinations and assign it to a distributed queue. This will keep the transactions local and hence eliminate the duplicate transactions and rollback. We tried it and it eliminated the dups issue. However I discovered another bug during my testing. Our cluster messaging mode is "Unicast" and message forwarding from zero consumer queues to queues with consumers fails. We have four/five nodes in the cluster and two consumer threads. I observed that the zero consumer queues always forward to one queue in the cluster that has consumers. The forwarding stalls when I bring down the node that has consumers. Again, we were able to reproduce this issue at will and Oracle has acknowledged that it is a bug. They've reported that Unicast fails without any warning whereas Multicast fails with a warning in the log. We have observed this message forwarding stalling even with UDQs.
    I have another case open for an issue where our message bridges that transfer messages from TIBCO to WLS stalls after sometime. The status is shown as active but it is not doing anything. The server instance shows stuck threads trying to roll back a message. TIBCO logs indicate that it is receiving a request to rollback a transaction but it is not finding the transaction to rollback. The only way to recover from this condition is to restart the cluster. I am fairly confident that he root case for this issue is again the XA transaction issue. I changed our UDQ to pinned destination in one environment and we are no longer seeing dups or bridge stalling there. Hopefully Oracle can resolve the message forwarding issue.Thanks again….

  • Duplicate DME message

    Hi there
    We have a problem that users often resubmit the DME file and then creates duplicate payments into suppliers bank account.
    Is there anyway that one can get a pop-up message, warning or error to notify the users that the DME file they are creating already exist?
    Thanks.

    Hi,
    Normally, warning message <u>F0417</u> should be displayed in such case. Which print program are you using to create DME file?
    Kind regards, Kyoko

  • When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48"  What does this mean?

    When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized.  Can't create record file, Please Report"  I press O.K. and this pops up - "Error occurred Result= -48".  Can't figure out why.  First time I have every had problems>  What's up with this?

    a -48 error is a duplicate filename.
    the first things i'd try are the oddball problems fixes:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Warning Message in Xcode

    Hi Everyone,
    I have version on my plugin for InDesign Server, I compile with Xcode 3.2.1 on Mac machine, every time I compile I get a bunch of warning messages like these:
    "Duplicate resource(resType 'CLST' ID 300)
    "Duplicate resource(resType 'FACT' ID 500)
    Any idea what are those warnings?
    P.S. using release version of InDesing CS4 on Mac
    TIA,
    Kamran

    Hello CodeJingle,
    Thank you so much for your help!!!
    Yes, I have merged all my movies into one - that’s how I’ve been able to get it to last for around 8 minutes - but it still bombs out.
    I will now take your helpful advice
    Kind of the opposite of what I was doing, and try to keep everything in memory.
    I will now start testing…
    Loading every piece of graphics onto the first frame of the stage - and not letting them free.
    I’ll set all cast members to [preload before frame one] and [cast member Unload: 0-never]
    I’ll also try to preload all my sound files too.
    And although it’s all in the one movie now - I will also try the ‘forget’ function between two movies.  (I’m not using any MIAW’s)
    After a ‘go to movie’ what commands / lingo code, do you guys use to "forget and completely close" an instance of an old movie?
    Is it just the ‘forget’ function.
    I'll let you know how my testing goes.
    Thank you again for your help
    Regards
    Milky

  • I am getting a warning message when i am trying to create a host-named sitecollection.

    Hi guys,
          I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
    http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
    When i tried to create a customer root site. I am getting a warning message
    " WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
    Application.  The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
    this port."
    I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
    Can anyone help me to solve. And i wanna know why this error message comes!!!
    Thanks in advance
    Rajendran.

    First, you shouldn't create a host named site collection on a Web app that has host header named.  Doing that implements host names at two different levels and will not work reliably.  Second I'm not sure what you mean when you say you didn't
    use the FQDN but used just the domain name.  A Full url will always be either an FQDN or a shorter Netbios name.  If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url  There is no way
    to use just the domain name.  For example, Contoso.com is the domain name.  Server.contoso.com or WEbsite.contoso.com are FQDNs.  YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
    still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain.  What is the URL for your root site and your host named site?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Warning message in ALV report

    Hi Experts,
    In ALV report i am getting warning like
    " Field string LS_HEADER is not referenced statically"
    Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
    How to correct this warning message.
    Thanks in advance.
    Thanks,
    Madhu.

    Dear Madhu,
    You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
    Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
    Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
    Regards,
    Naveen

  • Warning message in BW Report  through Portal

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
    Can u help me how to remove this ?

    Hi Manohar,
    Edit to add: Here I assume you have a Web Application Designer (WAD) report.
    You can suppress system and warning messages in WAD. Try this and see if it helps.
    - Go to your WAD report
    - In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
    - Click Web Item
    - Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
    Hope this helps,
    Regards,
    Petter
    Message was edited by: M Petter

  • Error message into warning message KO450

    Hi,
    There are  unsettle RA  value in project PAD-9114. Because of  this unsettle RA  value in  the project  we are not able to  close the project and receiving error message like below:
    1.There is still WIP for wbs
    2.Balance of  wbs is not zero.
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    How  to change  above  error message   into warning message so that   it will allow us to  close  the project.
    With regards,
    V.krishnamoorthy

    Hi,
    Thanks  for your answer. But still i am receiving the same error
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    With regards,
    V.krishnamoorthy

  • Standard warning messages in Vendor Request Form

    Hi All,
    Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
    For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
    Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
    These messages are displayed only at two places:
    1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
    2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
    I want to know, from where these messages are being populated and how to suppress these messages.
    Kindly suggest.
    Thanks in advance!
    Message was edited by: Oxana Noa Zubarev

    Hi All,
    Attaching the screen shot for refernce:
    After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
    There are we are getting these error message as highlighted above.
    Let me know if any info from my end would help in getting the root cause.
    Thanks in advance.

Maybe you are looking for