Duplicated text in TO, CC, BCC lines (very weird...)

I'm using Mail 3.1 on 10.5.1 and it was fine for weeks, but now... not so much. I'm not even sure what to look for to solve my own problem, so I'm hoping to get some help. So here's what happens when I type anything into any of these fields. Let's say I'm emailing "Joshua", and to help illustrate the issue I'll put each keystroke on a new line:
j = j
o = jjo
s = jjojos
h = jjojosjosh
u = jjojosjoshjoshu
a = jjojosjoshjoshujoshua
If I press any of the arrow keys, delete or tab it will just iterate the last "letter". That is to say:
keystrokes j,o,s,[delete],[delete],[delete] = jjojosjosjosjos
As you can see, this is pretty inconvenient... A coworker told me he had a similar issue with iChat, so I have hope there's a fix out there! I've since switched to Thunderbird, but boy, that is one miserable app...
Thanks.
p.s. I also sometimes experienced beach balls when downloading new mail and then full on crashes every time, but uninstalling GrowlMail (seems to have) fixed that.

do you have/use, by any chance plug ins or also input managers - such as grammar or spell check. These are known to cause some issues in Leopard and may in be incompatible. If you do I would advise you get rid of them and see if that solves your problem.
also you could log in as another user and try if you can duplicate that weird behavior, if not, then your issue may definitely be user specific.
Let me know what you find.
hope this helps

Similar Messages

Crystal 2008: Text, Can Grow=true, Max Lines=0, truncated after 2 lines

I have a fairly simple, grouped report with a handful of fields in each Detail section, one of which is a note/text field. I put the text field on its own line and set Can Grow = true, max lines = 0 so that it will display what it needs to display.
This happens to be a crystalreports.com report using data coming from Salesforce, and I can see in the source report that I have about 7 lines of text for one of my groups, but crystal is truncating it after two lines, and in the middle of a word.
The word ('for') doesn't have any obvious special characters in it, so I'm guessing that there's some sort of character limit that I'm bumping up against.
I have another record that is returning more than two lines, though; are there particular characters that could cause this? I can scrub the data and/or put Salesforce Validation Rules in place to try and prevent them from getting in.
Any suggestions would be appreciated.
Duncan

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

How can I get two lines mail list like Windows Live Mail and How can I get to, cc, bcc lines like Windows Live Mail?

I wish to move Thunderbird. But i have two main problem.
* I want two lines mail lis like Live Mail,
* I want to, cc, bcc line like Live Mail. I mean when, I write an e-mail address I will key "," (or another character) then I will enter next email address. Auto address completion must work for each address which I enter the address line.
Can i do those on Thunderbird?
I searched on the internet and there are much people who want this features.
Thanks..

I see the dropdown menus for CC and BCC, but they don't work. I click on them and there is no response except the name I already had in the "TO" field disappears! The attached screenshots shows the name in the "to" field, then the result after choosing "add CC" - the "to" name disappears.

Copying the item text in case of multiple line items

Hi All,
                I have a scenario where the sales order gets created in our SAP through a 850 idoc. The incoming idoc has only one item segment which carries the total order quantity ( for example say 1000). Since my company has contractual agreements with the end customer for doing multiple shipments , our sales department splits the total quantity into multiple line items in the sales order. Say splitting the 1000 quantities into 5 line items of 200 each.
The problem here is that when the sales order got created , all the related item text were copied only to the first line item ( of 1000 qty) and which is standard SAP. Since the order quantity was manually split, the related item text are not carried to the subsequent line items. The issue comes when an outbound (810) idoc is sent to customer . As I told earlier since only the first line item has the item text , the 810 idoc which was created for the first line item only has the item text . The rest of the 810 which were subsequently created for multiple shipments/invoices on different dates didn't have the item text in the 810's. This is becoming a major problem as the 810 files are failing at our trading partners end because of missing text.
Now my question is, Is there a way that I can make the item text copy automatically when multiple line items are created manually by business. Like is there a way where I can modify MV45AFZZ to copy the item text in their respective segemnts ( z003,z004 etc) to "N" number of line items.
Also please suggest if there is a better way of doing it. Suggstions are most welcome !!!.
Regards
Amrith

Hi,
First of all try to avoid doing select into corresponding fields. THis would improve the performance of the program.
Try to do a single fetch from the BSIS table . fetch the hkont, belnr, dmbtr fields in to a master internal table. Manipulate and play with the data as required. Don't hit the data base table more than once (unless it is required) . This would improve the performance of your code.
Try to code this way.
types: begin of ty_bsis,
             hkont type hkont,
             belnr type belnr_d,
             dmbtr type dmbtr,
          end of ty_bsis.
data: it_bsis type standard table of ty_bsis,
         wa_bsis type ty_bsis,
select hkont belnr dmbtr
          from bsis
          into table it_bsis
          WHERE HKONT IN S_RACCT
        AND PRCTR IN P_PRCTR
          AND MONAT IN S_POPER
         AND BUKRS EQ P_BUKRS
         AND GJAHR EQ P_GJAHR
          AND PRCTR IN S_PRCTR.
Using the data availabe in the it_bsis, you can manipulate as required.
Hope this would be helpful
Regards
Ramesh Sundaram

How to place two text fields on the same line in adobe

I am trying to create a form on adobe and I would like to have two unique text fields on the same line. Is this posible?

If you are using FormsCentral it is, the fields can be placed "side by side" in a row. There is a "+" sign on the right side of the field that brings up a toolbar to add a field adjacent. You can also right click on a field and select "Insert beside", or you can "drag and drop" fields next to one another or to a new row.
Thanks,
Josh
PS - One note, if you are using the "desktop" application of FormsCentral that comes with Acroat Pro XI make sure the application is up to date by either using the "Help" - "Check for updates" menu item or by signing into the application so that you have the latest features including the side by side layout.

In Mavericks "Mail" I am unable to access the BCC: line or to put a contact on that line for sending.

In Mavericks Mail I am unable to access the BCC: line for sending a blind carbon copy. I open my Contacts list, select a person, and when I click on the BCC: box above in the Contacts window, the person is not entered onto a line in the email for receiving a BCC: and the BCC: line does not even appear. Thoughts from all you experts out there?

I managed to find the answer to my own question. As shown in the screenshot below, the header field area on a new message contains a small lined box in the lower left corner of it. If you click on the lined box, it allows you to customize the Header field, such as adding a BCC: line.
Message was edited by: Radiation Mac

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

Ruth Schreiber
To what Premiere Elements 12 title template (lower 3rd type) are you referring?
It is not clear what you want to do.
a. Are you able to double click the template to open it in the program's Titler?
b. Can you select the present text with the Selection Tool to move it to custom locations?
c. Can you edit the existing text in the template?
The following uses the Aquarium lower 3rd template...where do you want to write text in the template?
We will be looking forward to your follow up.
Thanks.
ATR

Fill BSEG-LIFNR and LFA1-NAME1 in line item text field of Bank GL line item

Hi all,
I need to develop a program to populate the Vendor Number (BSEG-LIFNR) and Vendor Name (LFA1-NAME1) in the line item text field of Bank GL line item.
The UI design will have the input data as:
   - Company Code
   - Posting Dates (both from and to date)
   - Execute Icon
Please let me know how to proceed on this.
Thanks and regards,
Anishur

program a bdc to tcode fb09
A.

Mail doesn't display full email text, only displays the subject line

Mail doesn't display full email text, only displays the subject line.
My preview shows first three lines of email, but when I chose the email specifically mail doesn't display any lines of text. Been this way for about ten days. Please help. Ben

Awesome. Rebooting the phone worked. I had never turned the phone off before (for the next guy - you hold down the "sleep" button for longer than you'd think and that'll do a full shutdown). thank you for your help.

Print different text elements on the same line

Hi all,
1.
Is it possible to print different text elements on the same line ? with multiple write_form
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
         element       = 'TITLE1'
         WINDOW        = 'INFO'
     EXCEPTIONS
          ELEMENT       = 1.
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
         element       = 'TITLE2'
         function      = 'APPEND'
         WINDOW        = 'INFO'
     EXCEPTIONS
          ELEMENT       = 1.
How to print TITLE1 and TITLE2 on the same line ?
TITLE2 in bold.
2. How to print 2 text elements on the same line with include statement ?
/: include test1 ...
/: include test2
Thanks
Edited by: Moo Yac on Sep 22, 2008 8:23 AM

To be more specific :
I want to print the following
Text_symbol1:$Var1$      Text_symbol:$Var2$
on the same line.
where Text_symbol1 and Text Symbol2 are defined in SO10 for different languages.
Thanks.

Can I read the texts msgs from the other lines on my account?

Can I read the texts msgs from the other lines on my account?

rcschnoor wrote:
tikibar1 wrote:
If the phone is using Verizon Messages and you know the MyVerizon password, then you can read the messages from your computer.
Of course, this assumes the messages had not been deleted on the phone by the user.
Of course! And that also applies to reading the texts on the phones themselves.
Deleted texts will still show up on the text logs, though.

I'm trying to print onto mailing labels, but it won't line up correctly. It looks right on the template and the 1st row prints right. The text keeps moving down a line on each row of labels, preventing it from printing the rest of them correctly.

I'm trying to print onto mailing labels, but it won't line up correctly. It looks right on the template and the 1st row even prints correctly. The text keeps moving down a line on each row of labels, so the rest of it will not print correctly.

There are several ways you can go about this.
1. Most labels come with Word templates or downloadable Word templates. Simply open those in Pages.
2. Make a table with extra cells for the thin spaces between the labels and skinny those down to match the spaces. ie You have big fat cells for the actually labels and thin narrow empty ones for the gaps.
3. Make a floating Text box the size of one label, format with dummy text just the way you like it.
+Menu > Format > Advanced > Define as Placeholder text+
You can now drag and drop snippets of text, the addresses etc onto those and it will replace them matching the style of the existing text.
You duplicate that text box into position of the other labels by clicking on it with the command kety held down, then drag copy it up or across with the option and shift keys held down. Fine tune the positions with:
+Inspector > Metrics > Position+
Peter

JButton text on more then one line

Hi everybody!
I would to like if it is possible for a JButton to have a text on more than 1 line! I wanna do something like:
JButton muButton = new JButton("MY" + "\n" + "BUTTON");
Thanks!

Hello Deepak,
you have to use HTML-tags:
new JButton("<html>Zeile 1<br>Zeile 2</html>");
Bye
J�rg

The text in my icloud calendar is very faint

The text of my iCloud Calendar is very faint. Almost impossible to read. I can't find any settings where I can change it. It is not a computer problem as every other program and website opens fine. Is this something that other people are experiencing?
Thanks

Your comp must be the same size as your intended delivery product.
Many effects are not supported as flash vectors so when you have a comp with these effects exporting a flash file that includes these effects means that you're really getting a movie file with raster effects and therefore the file size is going to be bigger than a straight flash file.
My advice, if you are delivering flash then author in flash. AE is frankly lousy at it. About the only useful feature is to export a XFL file and open that in flash to finish it.

Images Problem in Firefox -- very weird -- please help!

Hi all, I need your help here with ideas...
I have built a site that is 100% Flex, full size. It uses images in two different ways: Image controls and HTML text. Both are populated dynamiccally from XML resources.
In IE, these all work perfectly. But I get some very weird behavior in Firefox.
I have a list with a custom item renderer using Images. When the user clicks on the list, a pop-up Canvas is displayed with the same image and an Text area with htmlText in-line Images. In Firefox, these images do not populate -- neither the table nor inside the text -- but the text shows perfectly, even spaced around where the image would be.
But elsewhere in the application, I have an Image control populated the same way, except driven by a datagrid selection, and that one WORKS FINE. I also have other Text areas using htmlText, populated the same way, and the in-line Images work great there in Firefox.
What is going on???

I think I figured it out.
The slashes in the image paths went the wrong direction. \ in stead of /
Apparently, this is no problem for IE, but chokes Firefox. Keep an eye out.

Duplicated text in TO, CC, BCC lines (very weird...)

Similar Messages

Maybe you are looking for