Duplicates - AT WIT'S END (HELP!)

I have an 8703e on the Sprint network. I have wiped my Blackberry. I have used Desktop Manager Advanced Settings. My BB is set to not accept duplicates and wireless synch is turned off. Nevertheless, when I am starting with the BB "clean," and I synch my Contacts and Calendar, I end up with duplicates. I have 356 contacts in Outlook, but 616 were added to my handheld. I have 200+ Calendar entries and more than 1700 (yes, 1700!) were added to my handheld. I am at a loss and do not know what to do. Can someone help me....please????

Yes, I have. Still gives me the stupid error message.

Similar Messages

At wit's end with imovie project -- need Help!

Aloha:
I am in the middle of doing a documentary movie of the yearly Air Show put on by my RC model airplane club. Over the past several years I have made a handful of other documentaries and all with out problem, they worked just fine.
On this one, however, I have run into problems that are new and completely frustrating. I have finished editing the movie and all works well in the iMovie mode. I can play the entire movie and all the parts and pieces work just fine. But when I burn the results onto a DVD some scenes (only a few) lose camera audio. This is also true if I export it to Quicktime.
My movie uses camera audio, imported background music and narrative voice-over. And all those play just fine in the iMovie program. But there are several spots where the camera audio doesn't come across in the final product, just total silence except for the background music or any voice-over narrations that may be present during those times. The camera audio just does not come through.
I am at wit’s end and need some help. Has anyone come across this and what did you do to fix it?
Thanks
Dan Page
Maui, Hawaii

Hi: Thank you very much for the rapid come back, most appreciated.
Hi Dan
A wild guess. Can it be so that those clips are
recorded in Your Camera with
the sound set to 12-bit (often factory/default set).
Should be 16-bit
I'll check the camera for that, but the same camera was used in all the clips and only two or three were missing audio when exported.
Try to extract the missing sounds from each clip and
redo a disk image in
iDVD and see if the sound is back.
That sounds like a great diagnostic and should be far less time consuming than burning a DVD.
Thanks for the hints.
Dan Page
Yours Bengt W

Internal Mic not Working, external mic quits arbitrarily, I'm at wit's end!!!!

Hey kids!
The Computer: Toshiba Satellite A355D-S69221
The Program: 32 Bit Windows Vista
The issue: Internal Mic not recognized, external mic quits midway through conversation, Realtek Digital output not plugged in.
So being the smart guy I am, a few weeks back I decided to do the smart thing and delete all the speech recognition software off this thing. I don't need it, so wth.
Now, my internal mic quit. I reinstalled the software, rolled back drivers, deleted drivers to rebuild the driver stack, did a BIOS update, did the GTA ViceCity cheatcode start (unplug everything hold power key 30 seconds, reboot, f2 to enter bios, f9 to update, f10 to save), and nothing.
I did notice that when I had the Realtek Digital Output set as standard, my mic jack was illuminated by a red LED, and the Realtek HD manager wouldn't pop up when I plug something in.
The last irritating part is that I will talk to my wife via vo/ip, the external mic I am using will just quit mid conversation, and I have to reload a driver to get it to work again. I am at my wit's end with this thing, can anyone help? The last thing I am goign to do is another system restore from an earlier date than I used before. Does anyone have any other hints/clues/ideas?
KFD

Thanks Jeff. No this isn't some kind of emergency so no one really minds my tinkering until it does get back up.
OK, I got it now. This is what my cyrus.conf looks like. It doesn't look like there's anything wrong with it...
# standard standalone server implementation
START {
# do not delete this entry!
recover cmd="ctl_cyrusdb -r"
# this is only necessary if using idled for IMAP IDLE
# idled cmd="idled"
# UNIX sockets start with a slash and are put into /var/imap/socket
SERVICES {
# add or remove based on preferences
imap cmd="imapd" listen="imap" prefork=0
imaps cmd="imapd -s" listen="imaps" prefork=0
pop3 cmd="pop3d" listen="pop3" prefork=0
pop3s cmd="pop3d -s" listen="pop3s" prefork=0
sieve cmd="timsieved" listen="sieve" prefork=0
# at least one LMTP is required for delivery
lmtp cmd="lmtpd" listen="lmtp" prefork=0
lmtpunix cmd="lmtpd" listen="/var/imap/socket/lmtp" prefork=0
# this is only necessary if using notifications
# notify cmd="notifyd" listen="/var/imap/socket/notify" proto="udp" prefork=1
EVENTS {
# this is required
checkpoint cmd="ctl_cyrusdb -c" period=30
# this is only necessary if using duplicate delivery suppression
delprune cmd="ctl_deliver -E 3" at=0400
# this is only necessary if caching TLS sessions
tlsprune cmd="tls_prune" at=0400
LIMITS {
imaplimit value=0
But yet it insists with the message: relay=cyrus, delay=239180, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: No such file or directory_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
when I try to send a message through the server. Could this be a permissions thing? I've fixed the permissions a lot of times and nothing seems to get changed...
Again, thanks for everyone's help. I'm sure this is something dumb that I'm just missing but since I'm not familiar enough with the system it's hard for me to figure out what that is!

Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
 ipconfig /flushdns
 ipconfig /registerdns
 ipconfig /release
 ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
 netsh int ip reset c:\resetlog.txt
 netsh winsock reset
 ipconfig /flushdns
 [restart laptop]
5) Configuring the TCP/IP in several settings
 Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
 I have used the following settings:
 a) Obtain an DNS server address automatically
 b) OpenDNS
 208 67 222 222
 208 67 220 220
 c) Google DNS
 8 8 8 8
 8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
 Computer Browser [changed from manual to automatic]
 DHCP Client [already set to automatic]
 DNS Client [already set to automatic]
 Network Connections [already set to automatic]
 Network Location Awareness [changed from manual to automatic]
 Remote Procedure Call (RPC) [already set to automatic]
 Server [already set to automatic]
 TCP/IP Netbios helper [already set to automatic]
 Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
 Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
 Manufacturer . . . . . . . . . : Intel Corporation
 Provider . . . . . . . . . . . : Intel
 Version . . . . . . . . . . . : 13.2.1.5
 Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
 Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
 Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
 Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
 Instance Status Flags . . . . . : 0x180200a
 Device Manager Status Code . . : 0
 IfType . . . . . . . . . . . . : 71
 Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
 BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
60-02-92-C6-D3-E8 Infra <unknown> -62 11 HOME-C7D4-2.4
60-02-92-A1-75-E0 Infra <unknown> -58 6 HOME-B917-2.4
00-1D-D5-D5-34-F0 Infra <unknown> -73 6 HOME-34F2
60-02-92-A1-75-E1 Infra <unknown> -58 6 (Unnamed Network)
06-1D-D5-D5-34-F0 Infra <unknown> -78 6 xfinitywifi
C4-27-95-C9-C4-2D Infra <unknown> -57 1 HOME-C42D
02-1D-D5-D5-34-F0 Infra <unknown> -74 6 (Unnamed Network)
00-0D-97-07-E0-79 Infra g -75 6 (Unnamed Network)
00-1D-CF-2A-44-C0 Infra <unknown> -86 6 HOME-44C2
02-1D-CF-2A-44-C0 Infra <unknown> -86 6 (Unnamed Network)
F8-E4-FB-3C-87-A2 Infra <unknown> -89 6 YVNM7
06-1D-CF-2A-44-C0 Infra <unknown> -87 6 xfinitywifi
0C-F8-93-7A-13-50 Infra b -87 6 PKennedy
06-F8-93-7A-13-50 Infra b -89 6 xfinitywifi
02-F8-93-7A-13-50 Infra b -87 6 (Unnamed Network)
E0-88-5D-C8-A9-DC Infra <unknown> -80 1 HOME-A9DC
E2-88-5D-C8-A9-DD Infra <unknown> -79 1 (Unnamed Network)
16-CF-E2-43-0B-30 Infra <unknown> -88 1 xfinitywifi
60-02-92-F0-A8-C0 Infra <unknown> -90 11 HOME-96A6-2.4
60-02-92-C6-D3-E9 Infra <unknown> -63 11 (Unnamed Network)
02-1D-D4-EB-87-00 Infra <unknown> -88 11 (Unnamed Network)
06-1D-D4-EB-87-00 Infra <unknown> -88 11 xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 63 Yes HOME-C7D4-2.4
Infra <unknown> Yes 70 Yes HOME-B917-2.4
Infra <unknown> Yes 43 Yes HOME-34F2
Infra <unknown> Yes 70 Yes (Unnamed Network)
Infra <unknown> No 40 Yes xfinitywifi
Infra <unknown> Yes 71 Yes HOME-C42D
Infra g No 43 Yes (Unnamed Network)
Infra <unknown> Yes 28 Yes HOME-44C2
Infra <unknown> Yes 20 Yes YVNM7
Infra b Yes 21 Yes PKennedy
Infra <unknown> Yes 33 Yes HOME-A9DC
Infra <unknown> Yes 35 Yes (Unnamed Network)
Infra <unknown> Yes 16 Yes HOME-96A6-2.4
List of preferred networks: 3 item(s)
 Profile: xfinitywifi
 SSID: xfinitywifi
 SSID length: 11
 Connection mode: Infra
 Security: No
 Set by group policy: No
 Connect even if network is not broadcasting: No
 Connectable: Yes
 Profile: HTC Portable Hotspot 9F50
 SSID: HTC Portable Hotspot 9F50
 SSID length: 25
 Connection mode: Infra
 Security: Yes
 Set by group policy: No
 Connect even if network is not broadcasting: No
 Connectable: No
 Reason: 0x00028002
 Profile: belkin.332
 SSID: belkin.332
 SSID length: 10
 Connection mode: Infra
 Security: Yes
 Set by group policy: No
 Connect even if network is not broadcasting: No
 Connectable: No
 Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
 Connectivity settings provided by hardware manufacturer (IHV): No
 Security settings provided by hardware manufacturer (IHV): No
 Profile matches network requirements: Success
 Pre-association status: Success
 Association status: Success
 Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
 Configured security type: Open
 Configured encryption type: None
 802.1X protocol: No
 Key exchange initiated: Yes
 Unicast key received: No
 Multicast key received: No
 Number of security packets received: 0
 Number of security packets sent: 0
 Security attempt status: Success
Connectivity
 Packet statistics
 Ndis Rx: 2068
 Ndis Tx: 2543
 Unicast decrypt success: 0
 Multicast decrypt success: 0
 Unicast decrypt failure: 0
 Multicast decrypt failure: 0
 Rx success: 3954
 Rx failure: 0
 Tx success: 537
 Tx failure: 4
 Tx retry: 2
 Tx multiple retry: 2
 Tx max lifetime exceeded: 0
 Tx ACK failure: 18
 Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: ‎00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
 Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
 Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
 Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
 Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
 Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
 Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
 Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
 Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
 Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1 19 ms 13 ms 17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 13 ms 27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3 20 ms 26 ms 21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4 18 ms 34 ms 22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 19 ms 18 ms 18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 35 ms 18 ms 18 ms 209.85.249.217
7 21 ms 19 ms 19 ms 72.14.233.93
8 * * * Request timed out.
9 * 2509 ms 677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1 54 ms 23 ms 12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 22 ms 19 ms 17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 19 ms 19 ms 18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4 18 ms 18 ms 18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5 19 ms 18 ms 22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 22 ms 36 ms 19 ms 209.85.249.217
7 26 ms 23 ms 25 ms 209.85.143.112
8 * * * Request timed out.
9 * * * Request timed out.
10 972 ms * * 216.239.51.97
11 148 ms 97 ms 95 ms 216.239.46.241
12 324 ms 130 ms 432 ms 209.85.246.252
13 * * * Request timed out.
14 1403 ms 101 ms 126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1 13 ms 13 ms 25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 15 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 20 ms 19 ms 17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4 17 ms 20 ms 20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 17 ms 18 ms 38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6 18 ms 18 ms 36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7 * * * Request timed out.
8 * 2191 ms 35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9 * * * Request timed out.
10 * * * Request timed out.
11 86 ms 84 ms 84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12 86 ms 86 ms 87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 87 ms 84 ms 85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1 16 ms 16 ms 19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 18 ms 13 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 21 ms 19 ms 21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4 18 ms 21 ms 18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name Test Result Test Summary
Hardware Test Passed Wireless Hardware is enabled
Driver Test Passed Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test Passed Radio is ON
Scan Test Passed There are 25 Networks available to connect
Association Test Passed Associated
Authentication Test Passed Authenticated
Signal Test Passed Signal Quality: Poor
Ping Test Failed No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.

Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity Domain
User Description
45 EvtEngine
3/8/2015 20:40 Success
Connection SYSTEM
iAMT - Failed to read Windows Events Log
46 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158 S24EvMon
3/8/2015 20:47 Error
Driver SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163 S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179 S24EvMon
3/8/2015 21:03 Information
Driver SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186 S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

HT4356 Am at my wit's end trying to print to epson workforce 845

I am at my wits's end trying to print my iPad 2 to an epson workforce 845. Have looked on Epson, Apple, been 3 hours on it, downloaded epson's print utility, but it nothing I do seems to work, trying also to set up with my MacBook Pro for wireless. It worked for awhile and quit. But my iPad has never worked. It works with ease on my HP at home, but not my Epson. get message: no AirPrint found. Geez alou, someone help me before I shoot myself (only joking about shooting myself)

What make and model router do you have?
Make sure they are on the same wifi network. If they are, you'll likely have success turning off the router, the printer, and the iOS device and powering them back on.

At wit's end with printing

I am begging for some help here. I have read everything I can find on printing within Aperture. The best guides appear to be published by Apple, and so I have followed those. I also have a couple of books that I use as well. I have a long history of successful printing on a pc so this is very frustrating for me.
I calibrate my monitor (iMac) with Gretag EyeOne Display2 hardware. I have used the recommended 2.2 gamma setting, the 6500K, and 120 luminance. I use a profile for my paper. Color management in my printer drive is off. On my pc, the profile was spot-on. I have yet to print a "spot-on" photo within Aperture.
I just tried a beautiful shot of two girls (both gorgeous green eyes on my monitor). The print is dark as heck and colors are totally off. I need to print these for a project that is due soon. I am at my wit's end.
Can someone help me? I am starting to get a bit desparate, as the paper and ink-wasting is costing me a ton of money. I will be forever grateful if someone can point me in a direction that will help. Not sure where else to go from here.

it's a long reply, but bare with me. i hope this is of some help for you.
the colors are still black/brown (when they should be blue, for instance).
the colors are still black/brown??? does the print look like it was almost flooded with ink that you can't quite make out what you've printed, or that where it's suppose to be blue it's black/brown in color?
when an image prints very dark, i can only assume that somewhere in the set-up color management is happening twice.
go to this link, http://files.support.epson.com/htmldocs/r220_/r220__rf/softx3.htm and then scroll down to Color Management section. note the screen capture for the Stylus Photo R220 print dialogue. i know you've already checked, but would you check again to make sure that your setting is not the same as in the screen capture. that is Off (No Color Adjustment) is the only option you want selected.
(one more thing that you could double check, and this is going to sound very absurd, because it's most probably not possible. would you check to see if the ink cartridges are where they are supposed to be, and that they're the right color? if you have printed with these same ink cartridges without any color problems on your pc, then it rules out misinstalled or mislabled ink cartridges.)
by the way, dale's suggestion is the right direction. you want to put aside (remove) custom profiles and other existing profiles and use only what the R220 driver installs by default.
meanwhile, for the purpose of meeting your deadline, i suggest that you make your prints with what have worked for you. after you've taken care of that, you can continue with your current Color Management issue.
one more thing. it's not your imagination, there is very little information about color management and printing in Aperture.
Mac OS X (10.4.7)

When I try to duplicate a project in iMovie 11, nothing hapens. I click on the project, then click on duplicate. Nothing happens. Help!

When I try to duplicate a project in iMovie 11, nothing hapens. I click on the project, then click on duplicate. Nothing happens. Help!

Is it Mac OS formatted?
If it is not, it will not work with FCP.

At my wits end - HELP!!!!

After 22 total restores and many many crashes and quits I brought the iPhone 3G to the Genius Bar, they replaced it without questions when I told them what was happening making me think I was NOT alone (although, the Apple Forums are FULL of problems with 2.0 and iTunes problems).
I got the new iPhone 3G on Friday afternoon, I have already had to do 2 total restores on the new one! Crashs, quits, and the stuck Apple logo killing the phone has been my experience. The last two times it died was was using Safari - it crashed leaving me with the Apple logo and would not restart.
The second time I just deleted AIM on the iPhone as it was quitting. It killed the iPhone. The first iPhone died differently so many times I lost count. Unfortunately the new repacement one that was BRAND new, not a replacement part seems no better.
I have tried running only a few apps and restoring it from different Macs and have even re-downloaded the Firmware several times.
I am now going to try to run the iPhone without ANY third party apps at all and see what happens. Kind of kills the point of owning an iPhone 3G, but I am at my wits end with this phone.
The restores take forever and when it happens on the road it leaves me without a phone! This is the worst experience I have ever had with an Apple product, maybe the worst with any product. This was no ready for public consumption.

Michael,
They replaced my iPhone 3G with a brand new unit (not refurbished or service part). Opened it in front of me and it was a new SIM that they activated by transferring only my account to the new iPhone 3G. Also when I restored these units I set them up as a NEW iPhone and did not use the backup in order to risk a corrupted backup. I even re-downloaded the firmware several times and used two different Macs.
I finished running onyx, ran it twice, rebooted and ran it again. I did not find much. I deleted all the applications from iTunes on my MacBook Pro. Rebooted and downloaded them from App Store one by one.
I plan on running the iPhone 3G with NO apps for a day or two first. I need to have a working phone and the discussions here are FULL of people having similar issues with having to restore. One guy restored 33 times, even beat me. I saw people with 8 to 20 crashes and restores, so apparently I am NOT alone.
I sure hope Apple has an update soon! I have filled out feedback form.
If I see the iPhone working without apps, I will try one at time with the simple ones first. I have lost hours and hours on this problem. I either need to move on or get a Blackberry. After three weeks, no fixes from Apple is not encouraging. They should at least acknowledge the problem.
They were supposed to certify apps, it is pretty clear they never looked at them or tested them. They need to allow developers to talk to each other and get rid of the stupid NDA.
It is totally unacceptable that if ONE app quits, and even after a reboot of the iPhone it still does not allow ANY of them to run again. I have had ONE app quit, immediately leaving me with an Apple logo and a bricked phone. Hard restart still left me with an Apple logo on a bricked phone.
No quitting app should KILL the iPhone, unacceptable. We need a software fix now. What a terrible rollout of what should be a fantastic product. I got to wonder how many returns there will be. I am getting close to doing something I have not ever done, return an Apple product for being dissatisfied. I really could not recommend the iPhone to anyone at this point.

At wit's end with Add-On disconnecting. HELP!

I've now been struggling with this problem for the better part of a week trying different things, working with SAP support -- but to no avail.
Here's the deal: I wrote a simple add-on using the UI-API. It adds one button to Order Entry. I run the add-on through VB.NET with SBO running and it works great. I compile, create the add-on installer, create the .ard file and add the add-on in SBO.
The add-on installs just fine. Now when I go to start the add-on in SBO (whether automatic or manual), the add-on will disconnect and send me the message "Add-on...is disconnected. Restart, Ignore, Continue...". I've narrowed down the disconnection to the line of code where the add-on is grabbing the Application: SBO_Application = SboGuiApi.GetApplication()
I've now gone as far as using the simple "Hello World" sample from the SDK and I don't change anything. It still has the same problem.
I've upgraded to patch 32 (per SAP's instructions) and it still doesn't help.
HELP!! Any ideas??
I really appreciate it. If someone helps solve this problem, I will buy you dinner.
Thanks,
Curtis

Are you getting the connection string from the UI API - you MUST NOT use the development string
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
Here is a code snippet (VB .NET 2003) that will show you how to get the string from the UI API
#If DEBUG Then
            '1a. This is for Testing Purposes
            sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
#Else
            '1b. This is for Add-On Purposes
            sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
#End If
(ensure the development string is not set up in the project properties and compile your .exe in release mode - recompile your installer with the new exe and then create a new .ard file and install)
if all else fails add message boxes to every line of your .exe startup cade and see where the app breaks - then you wil have an idea of how to fix it (you can also catch exceptions to check the system errors)
Hope this helps..

Having continuous issues with my iMac, all I want to do is perform a clean install... at my wit's end. Help please. :(

I apologize in advice if this story is discombobulated or more information is needed to provide me with an answer. I will do my best to provide as much details as possible, but this is a problem that has been occuring for the past few weeks and some things I've forgotten the specifics of.
I will start by explaining that my iMac specs are:
Processor 3.06 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Version 10.6.8
I've owned this iMac since about April of 2010. I've never had any problems with it until recently. At one point in time, I had a Boot Camp partition made in order to install Windows, as I wanted to run some games that weren't available to Mac users. After awhile, I eventually bought a Windows Laptop for my gaming needs. When this happened, I decided to erase previously stated Boot Camp partition in order to free up more space on my hard drive.
After a few months, had major issues involving a trojan virus on my laptop, it destroyed my hard drive, and I wasn't able to buy a new one at that time. Recently decided to try and create a new Boot Camp partition to reinstall Windows. When I attempted that, (I apologize, I don't remember the specific error) it wouldn't allow me, and from what I remember after doing some google research, it sounded like somehow my hard drive had become disorganized, and needed to somehow be reorganized.
At some point in my google research I found that using the Repair function in Disk Utilities would possibly help. When I tried that, (the only reason I know this is because I tried just now to get the error to pop up) I'm given a message "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
So here I'm thinking, "okay! No big deal! I have the disk still, I will just back up my hard drive to an external hard drive". So I buy an external HDD, back up everything I need. I then put the disk in, and my optical drive spends some time thinking, then spits it back out. It does this repeatedly. I do some more google research, find that optical drives crapping out on mac users isn't all that uncommon. I try to clean it with a trick someone suggested. I then tilted my iMac to one side, it accepts a cd! I try it again, and I'm no longer able to trick my iMac into reading disks. Sad face.
Instead of hefting large sums of cash at Apple to replace my optical drive, I buy a far more affordable external cd/dvd drive that is working perfectly fine. So after waiting for that to be delivered, 3 days later, I'm excited to finally get a clean install with my OS X drive. At this point, I care little about repairing, and have decided to just completely clean install. I restart my iMac, boot from disk, and I get the spinny thing for about 20 minutes. I think, "hmm... should it take this long?" So I reboot and try again. Same thing. I then let it run overnight, and wake up to spinny thing. When my Mac is on, it reads the dvd just fine. It just won't boot from it and let me start the clean install.
So then I get the idea maybe I can do a remote install of the disk from my friend's macbook. No such luck, won't seem to recognize anything. Then I see that I can make a copy of the disk image to my computer, and burn that image to a partition made on my external HDD, so that I can boot from that. Well, the only info I could find was a gentleman burning a downloaded version of OSX Lion, but I figured, "hey, its the same thing, right?" I guess not. I tried copying the image using the restore function in Disk Utilities, and it does indeed show up when I hold Option at start up, but booting from it does not start up properly. It starts up like any normal time I restart. I'm thinking its cause the way I copied it didn't involve a .dmg file.
So I try to copy the image to a file on my computer, but when I do that, I get some sort of input/output error.
What can I do at this point? I thought I originally set up Time Machine but when I checked recently, no such luck. All I want is a fresh reboot of my Mac. I'm guessing somehow my hard drive became corrupted in some way. I mean, it truly doesn't seem to be affecting anything, except somehow even after deleting all known movie, music, game, etc. files, I still am using up 270 gb of space. Maybe I never un-did the Boot Camp partition properly and kinda screwed myself on this one.
I've tried just about everything. I never invested in Apple Care, but even had I done so, I think it would have exceeded the warranty, as I had thought it was 2 years. I could be wrong, either way, its water under the bridge now. I need to fix this myself. I'd still like to use my iMac for general use, and to utilize the 1 TB of storage it possesses.
Any help is greatly appreciated, sorry for the wall of text, its been a complicated few weeks. Thanks!

Whew... never buy an iMac or Laptop from Apple without the 3 year extended AppleCare... well 2 years extended... & I think they should be called on this, they should come with a 5 year Warranty, with more available if you want.
I think, "hmm... should it take this long?"
No way, Houston, we haave a problem, not sure what... RAM, Logic Board, etcd.
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Report outcome please.

I Am At My Wit's End...Going Crazy...Ready To Pull My Hair Out HELP!!!!!!!!

someone PLEASE help me!
here is my problem:
my loop browser likes to delete my loops. they just disappear for no reason....user loops as well as the apple ones. i have my loop folders where i believe is the correct location. but they aren't in the browser. i take that back....every time i open logic, some folders appear, some disappear...i open it again, different ones are there....the ones there the last time are now gone. basically they keep appearing and disappearing....most of them...some have never shown up in the browser. the last time i checked...all i had in there were the ones for the symphony jam pack. i'm afraid next time i open logic none will be there. i keep moving them in and out of the user and apple loop folders thinking that might do something. gah! i just don't know what to do. and god only knows if all the samples and loops i created are anywhere on my computer anymore. oh...and if i try taking the individual folders or files and drag them into the browser, logic freezes. and it doesn't matter anyway because those that i succesfully loaded into the browser that way have also disappeared.
can someone please please please help me. i am desperate. i have had the most obnoxious day already. i am having all these problems with the computer, my car was towed (not my fault either), i woke up at 3am because i couldn't sleep....i'm just stressed and all i want to do is work on music.
thank you for your help!
also...i still haven't arse to register my copy....is it possible that there is some patch that i missing that i would remedy this. i'm just wondering if this a software bug or i just completely lose at the computer.

maybe it does have to do with other apps. i wish i would have paid attention to when this started occuring so i could narrow down which application might be the culprit.
the only thing that seems to be working right now is if i take my loop folders out of library/audio. i dragged some to my desktop (don't ask me why i did this) and imported them from there. for some reason they are staying in my loop browser. also when asked where i wanted to put the files, i selected them to go where the rest of the loops are at....in the proper directory. i'm thinking of trying this with all the loops and see what happens. something is corrupted and i'd like to know what and why. i admit, which i am embarrassed about, my computer is a mess. i really need to organise it and all that. actually, i am hoping hoping hoping to get a macbook just for my music. it would make life easier for me seeing i am quickly running out of room on all my hard drives.
the only loops i am having trouble locating are all the ones i made recently. which i am upset about. but i am sure they are here somewhere. i just need ot wade through the mess to find them.
thank you for your help.

I'm at the end of my wits. Please help.

Greetings,
My Acrobat 8 will not print in Portrait Mode. It is set to print in this
mode as well as all my three printers. However, Preview in Acrobat shows the
size of the page 11X17 in portrait mode, and when I click on it it switches
to 9X11 Landscape Mode.
Switching back and forth does not make a difference in printing: it comes
out landscape anyway.
I deleted the preference folder, but it didn't help a bit.
Should I re-install it now?
Thanks in advance

"Bill@VT" <[email protected]> wrote in message news:[email protected].. > Do you have 11X17 paper in the printer. Some printers communicate back > about the paper installation as I understand it and it may be telling > Acrobat that it has different paper and then Acrobat prints accordingly. > Such a function may be a printer driver issue and not one of Acrobat. Thanks for your response. Well, actually, the printer is fine: I'm able to print from Word or Photoshop, etc without any problem. I'm also able to print without a problem from Acrobat on my laptop.

Someone PLEASE help. I am at my wit's end... (Question concerning iTunes installation error)

This is SUPER frustrating. A couple of months ago, I tried to update my iTunes to iTunes 10.5. After I had installed it, I got the infamous "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I was, consequently, having problems with my laptop as a whoel at the time and thought that this was the source of the problem. However, I just got my laptop back after having it fixed by technicians. I have tried to download iTunes again and I am getting the same message. I have scoured through countless questions here on the Apple Support website and on the internet in general. NOTHING has worked. I have an iPod nano 6th generation and haven't been able to properly manage my music because of this. Please help!!

Thanks - I'm usually better with my netetiquette, but I had just spent a very frustrating time trying to figure out what should have been a very simple thing.
I still have no idea why the headphones started working. But I did finally figure out that GB has multiple input settings for my pre-amp (mobilepre usb) - although this is way more hidden than it should be. Problem is solved.
And to anyone I may have offended with my rant - my apologies. I'll try to keep that down in future.
Thanks again.

At wit's end..please help!

I am having multiple problems with my itunes. First off, I would post the diagnostic, but when I try to run it, itunes just freezes up.
The main problem I am having is getting to my purchases that need to be downloaded. I have 34 in the queue, and whenever I click on "Check for downloads" all I get is the "Itunes store temporarily unavailable-try again later". This has occurred on five different internet connections (including my home connection) over the course of 4 months now. If I try to do the same through the "my account page" I get the "accessing itunes store" and then it just stops and nothing happens. I have read countless posts here with similar problems, tried all the solutions including updating my itunes, going through the msconfig, flushing the dns, uninstalling the Norton trash (with the tool) that came with the computer, etc., etc. ad nauseum. I even contacted support, who were of no help. Does anyone have any ideas how I can get around this?
Message was edited by: spn357

Okay, so here are the diagnostics:
Microsoft Windows Vista Home Premium Edition (Build 6000)
Hewlett-Packard HP Pavilion dv6500 Notebook PC
iTunes 8.2.1.6
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.2.2
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number < Edited by Host >
Current user is not an administrator.
The current local date and time is 2009-08-02 18:26:17.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {69D35568-8D7B-49DF-9392-14C589F1F600}
Description: Broadcom 802.11b/g WLAN
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:30:00 1970
Lease Expires: Thu Jan 01 04:30:00 1970
DNS Servers:
Adapter Name: {3C4C231C-BD71-4AC7-A165-5023550969D3}
Description: NVIDIA nForce Networking Controller
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Sun Aug 02 07:14:46 2009
Lease Expires: Sun Aug 02 07:14:45 2009
DNS Servers: 192.168.2.1
192.168.2.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
An unknown error occurred (-28).
Secure connection attempt to iPhone activation server unsuccessful.
An unknown error occurred (-28).
Last successful store access was 2009-08-02 18:25:01.
** iPod/iPhone Connectivity Tests **
iPodService 8.2.1.6 is currently running.
iTunesHelper 8.2.1.6 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
Scott's iphone, iPhone running firmware version 2.2.1
Serial Number: < Edited by Host >
Most Recent Device Not Currently Connected:
iPod classic running firmware version 1.1.2
Serial Number: < Edited by Host >
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
I know it says that the connection failed because it timed out, but I have a touchy internet connection. I don't think this is the root of the problem, because as I have said before this has occurred from five different internet connections, including my home connection. Plus, the store works normally. It is the "check for available downloads" that gives me the problems. Could it have something to do with the secure connection line in there, and if so, how do I fix it?

HELP! "Reduce background noise" changes from audio clip to clip, even though the percentage is the SAME. At my wit's end...

I am working on a lengthy editing project and am near tears at this point. Any and all advice would be deeply appreciated.
I am using a2012 MacBook Pro running Mavericks (10.9.5) and iMovie 10. I have been using the "reduce background noise" feature in iMovie 10, with movies where audio is detached, and I have a series of clips stitched together (the result of editing, or adding voiceovers). I'll add 4% reduce to the first clip, and it sounds great. I do the same to the second clip and it sounds as though the setting is at 100% — even if it's at 0%. In other words, the audio is really distorted.
I have tried relaunching iMovie and the MacBook itself, to no avail. The first clip is fine, all those that follow sound horrible, no matter how I change the setting.
Again, any and all advice or suggestions would be very welcome. Thanks!

I'm not sure if anyone is going to read or respond to my plea, but just in case, I thought I'd better update. I went into our local Verizon store today and explained my problems. I was nervous to do so because I didn't purchase my phone there and didn't know if they'd refuse to help based on that fact. The local store of a competing carrier will not help you if your phone wasn't purchased in their store.
What I found out was that my method for pulling the battery was wrong. I didn't realize the phone needed to be turned on when you did that. I did it the correct way and now most of my problems are gone. The one problem it is still having is not being able to update from 2.2.1

Duplicates - AT WIT'S END (HELP!)

Similar Messages

Maybe you are looking for