Duplicates: Can Aperture Help, using Filename searching?

Assuming you don't check, Do not import duplicates, when you import photos. It's my understanding that Aperture still checks for duplicates, meaning it will look to see if there is a Master already in your Library with the same filename. So, if you change the filename of your Masters when you import them, then Aperture shouldn't find any duplicates.
But, if Aperture does find another Master with the same filename and you keep the duplicate import option unchecked, then Aperture should create the new Master with a different filename. I guessing that whatever Aperture adds to the filename is some kind of a standard suffix, like the number 1 or (1), or something.
If you know what Aperture will always add to a filename in the case of suspected duplicates, then couldn't you search for that info in the filename and create a list of possible duplicates?

Kirby Krieger wrote:
This should be easy to test
You are correct.
Guess I should have tested as opposed to posted.
Sorry.

Similar Messages

  • Why can't I use the search tool on a server

    Why can't I use the search tool on a server

    Thanks.  That seems unfortunate.
    Bruce Burton
    Kiku Obata & Company
    6161 Delmar Blvd., Suite 200, St. Louis, MO 63112
    Direct 314.505.8427  Fax 314.361.4716
    www.kikuobata.com

  • Can aperture be used with IR images?

    Can Aperture be used to adjust the red, green & blue channels in an infra-red captured (via IR replacement sensor) image?

    What kind of processing do you want to do?
    If the IR-image is encoded as a false-colour RGB image, then Aperture can open it and you can use all effects and brushes on this image; only Aperture does not provide any special operations for IR images, like classification or computing the vegetation index or something similar.
    You could try to adjust the the three channnels using the "Curves" adjustment for basic corrections.

  • Can Aperture be used with iPad?

    can Aperture be used with iPad?

    Welcome to Apple Support Communities
    Aperture is available for Macs, but not iPads. However, you can use iPhoto for iPad > https://itunes.apple.com/us/app/iphoto/id497786065?mt=8

  • Itunes can't find file, finds file, then duplicates. can anyone help?

    Recently i purchased music from the itunes store. days later i went to listen and it could not locate file. so i searched and found it where it should be (in my external drive). when i played the track, it duplicated in my library!!! so naturally, i went through and deleted the duplicates (i deleted the newly added files keeping the originals). now, the files are completely gone. no originals. nothing. (and i know i will have to purchase the songs again because no, i did not back them like i should have). now when i go to play certain existing tracks (not purchased), same thing. cannot locate file, i go to my external hard drive, find the file, and it duplicates in my library, only now i am not deleting anything until i find out what is causing this. can anyone help, please?

    Does this page contain anything useful? To search for the game, follow the instructions in this article.
    (16448)

  • Can't we use Binary SEARCH  for TYPE SORTED TABLE?(Performance Improvement)

    Hi Expert!
                       I have declare a sorted type table with NON -UNIQUE, and want to use Binary search in read statement. But while  using bunary search in read statement I'm facing an error. The ERROR is
    "Table LI_MARC is a SORTED TABLE or INDEX TABLE. The BINARY SEARCH
    addition is only allowed for these tables if the key specified is an
    initial part of the table key."
    Please find detail
    TYES: tt_marc  TYPE SORTED TABLE OF marc   WITH NON-UNIQUE KEY matnr,werks.
    DATA: li_marc type tt_marc.
    READ TABLE li_marc INTO marc WITH KEY matnr = i_mbew-matnr     
                                                                          werks = i_mbew-bwkey BINARY SEARCH . 
    To my understanding , there is no need to mention Bianry Search  for sorted table TYPE. Please  let me know can  i use ?

    Hello,
    there is no need to mention Bianry Search for sorted table TYPE.
    Yes, this is because for SORTED TABLEs binary search algorithm is used by default for READ TABLE. Although you can use BINARY SEARCH addition but it's use is redundant.
    As for your case you've defined the KEY fields incorrectly There shouldn't be any "comma(s)" between the fields.
    TYPES: tt_marc TYPE SORTED TABLE OF marc WITH NON-UNIQUE KEY matnr werks.
    When you define it with commas
    TYPES: tt_marc TYPE SORTED TABLE OF marc WITH NON-UNIQUE KEY matnr, werks.
    the result is something like this:
    TYPES: tt_marc TYPE SORTED TABLE OF marc WITH NON-UNIQUE KEY matnr.
    TYPES: werks.
    Hence you were getting the syntax error!
    BR,
    Suhas
    PS: As for MARC you can use UNIQUE KEY addition because MATNR & WERKS are the key fields in the table.

  • HT204088 Why can't I use Library Search in iTunes?

    Why cant I use Library Search in Itunes?

    iTunes supports only mov mp4 and m4v video formats.  If you have added above format files to iTunes library and still not showing in the movies library, please repair your QuickTime.
    Control Panel > Programs n Features > highlight QuickTime, click CHANGE then REPAIR.

  • Can Aperture be used on a PBG4 12

    Hi,
    I have a Power Book G4 1.33gHz and a Cinema 20 Display and I'm hoping to use Aperture after maxing my memory to 1.25 G and buying a new Graphics card.
    Is this a good idea and what card would be ideal. (I do some Final Cut Pro HD movie stuff too)
    Any ideas will be welcomed.
    AP
    PBG412   Mac OS X (10.4.4)   Cinema 20

    If Adobe is supporting the 1GHz PowerBook with their pro level application why can't Apple?
    Adobe isn't using any graphics card processing like CORE IMAGE
    as graphic cards get more advanced the applcation could get faster (and graphics cards are easier to upgrade then processors (in desktop units) As well Graphics cards are advancing faster then CPU's are (they have broken MOORE'S LAW)
    GPU processing allow better realtime support for RAW image viewing and filter processing
    DAVE

  • Can you help with filename template editor, RAW copy asDNG 6 dig sequence_yd?

    lightroom 3 for pc - I need help to set up filename template editor as follows  for RAW copy as DNG
    6 dig sequence_year--Month_day.dng (copies from metadata)
    sample as follows:
    128580_2013-April-24.dng
    128581_2013-April-24.dng
    so the next # would be
    128582
    I want it to automatically go to the next #.
    Thanks for your help.
    Andy

    Nevermind I finally figured it out! :-)

  • Can Aperture be used in XGRID?

    Anyone know if there's a way to get Aperture to work in XGRID?
    Aperture runs fine on my MacBook Pro, but I have two identical MacBook Pro's and was wondering if there's a way to get the lazy MBP to do some work.

    PS - In case you think my above post sounds implausible, here's an article from O'Reilly (the book publishers) that talks about using iMovie with a laptop and XGRID.
    http://www.macdevcenter.com/pub/a/mac/2004/05/11/xgrid_pt1.html

  • Can aperture help me obtain a serial number for a stolen lens?

    Someone stole my lens at a wedding and I dont have the serial number because it was bought off ebay and I didnt bother to write it down.

    It will depend on a number of factors. First is if the camera recorded the lens' serial number. If it did Aperture might display it but I don;t believe the serial number of the lens is part of the EXIF data Aperture stores. Easy enough to check , go to View->Metadata Display->Customize and see if it is there. There is a serial number entry but I believe it is for the camera not the lens.
    Finally if Aperture is not showing it try ExifTool by Phil Harvey,  it will display all exif data recorded in the image file.
    regards

  • Function module to avoid duplicates in seacrch help through search helpexit

    Hi all,
    I have created composite seacrh help using 2 search helps( i have craeated search helps through se11).
    now after i execute my program and press f4 , it is giving duplicate values( repeated values in my list if i press f4 )
    I came to know that i can avoid duplicates if i call cooreesponding function module in seacrh help exit ( we can find this tab in se11 screens )
    Can you please help me in knowing the standard function module to avoid duplicates in seacrh help through seacrh help exit ?
    Thank u vry much in advance...

    Hi,
    check this thread
    [Thread|http://www.sapfans.com/forums/viewtopic.php?f=13&t=313139]
    Also check this FM C140_DELETE_DUPLICATES
    Rhea.
    Edited by: rhea on Dec 2, 2008 9:31 AM

  • Can anyone help with searching 'contacts' in iphone4

    Hi guys - apologies if this is a dumb question but I am new to iphone. Just got the iphone4 - the apple shop copied the old contacts from my old nokia onto my iphone, then when i got home I sync'd the iphone with itunes and it copied my contacts into 'address book' on the mac.
    I then saw that some of the names had been messed up in the process eg surname where first name should be and so on, so I spent an hour sorting it all out on the mac.
    I then re-sync'd the phone with the mac and the contacts copied back over.
    My question is this - when I want to find a person on my phone and I tap the column of letters on the right hand side of the contacts list, it takes me to the surnames - if I want to find 'natalie henshall' for example I have to press 'h'. Is there any way to change this so I can tap 'n' for natalie?
    I know it is only a minor point but I really can't get used to searching by surname!
    Thanks in advance & sorry for the lengthy post!

    thanks - i tried that before posting and it didn't seem to do anything - however after powering the phone off and back on again it is working fine now... thanks for the reply!

  • Need help using dbms_scheduler to submit an immediate job on the database

    Hi. I need help using dbms_scheduler to submit an immediate job on the database. Essentially I want to issue a one-time call to an Oracle Stored Procedure - this procedure will then send an email. I've never used dbms_scheduler before, but here's what I have so far.
    So my Program is a stored database procedure named 'TTMS.dropperVacationConflict_Notify', but my problem is that I need to pass 3 parameter values to this job each time I run it. This is what I can't figure out. The procedure expects an 'Id' as number(5), begin_dt as a date, and end_dt as a date.
    How do I pass these values when I run my job? Can anyone help?
    begin
        dbms_scheduler.create_program(program_name=> 'PROG_DROPVACCONFLICTS_NOTIFY',
         program_type=> 'STORED_PROCEDURE',
         program_action=> 'TTMS.dropperVacationConflict_Notify',
         number_of_arguments => 3,
         enabled=>true,
         comments=> 'Procedure to notify PCM of a Dropper Vacation Conflict. Pass in Dropper Id, Begin_dt, and End_dt');
    end;
    begin
        dbms_scheduler.create_schedule
        (schedule_name=> 'INTERVAL_EVERY5_MINUTES',
         start_date=> trunc(sysdate)+18/24,
         repeat_interval => 'freq=MINUTELY;interval=5',
         end_date => null
         comments=> 'Runtime: Every day all 5 minutes, forever'
    end;
    begin
        dbms_scheduler.create_job
        (job_name => 'JOB_DROPVACCONFLICTS_NOTIFY',
         program_name => 'PROG_DROPVACCONFLICTS_NOTIFY',
         schedule_name => 'INTERVAL_EVERY5_MINUTES',
         enabled => true,
         auto_drop => true,
         comments => 'Job to notify PCM of Dropper Vacation Conflicts'
    end;
    /And I use this to execute the job as needed...
    begin
        dbms_scheduler.run_job('JOB_DROPVACCONFLICTS_NOTIFY',true);
    end;
    /

    Duplicate Post
    Need help using dbms_scheduler to submit an immediate job on the database

  • I just updated to iOS 7 on my iphone 4 and now my iTunes Store doesn't work. The App Store works fine, but the iTunes comes up blank whenever I touch the icons. It doesn't even seem like it loads at all. Can anyone help?

    I just recently updated the software on my ihpone 4 to the iOS 7 and now my iTunes Store does not work. All of my other apps work perfectly fine except iTunes.  Whenever I open the app, the icons for music and movies and tv shows come up, but when I touch them, nothing happens. The screen is just blank. And I already tried updating again, updating iTunes on my computer, turning my iphone off and on, and resetting my ihpone, and nothing works. Can anyone help?

    I searched this site for ios 7 and itunes store and found numerous others with the same problem, and several suggested solutions. One said that they had blocked all cookies and that was apparently the problem. I had done the same thing - blocked all cookies. So I set cookies back to "third parties and advertisers" and that solved the problem. Now the itunes store is working. 

Maybe you are looking for

  • Final cut pro X and OS Yosemite

    Asking if compatibility between Final Cut Pro X and OS Yosemite is checked or will be a new update coming out?

  • Infotype 2

    Hello, In Infotype 2 if the firstname and lastname are same is there any function module to get the name without duplicate. Regards, Aravind

  • Question about static properties in implementation (.m) file

    I've been using some static properties in my implementation files so they can be accessed by class methods like so for example: #import etc static Class foo; // <-- Here is where I've been defining static properties @implementation Bar - init { foo =

  • What does "cannot find symbol"

    i got this when i was writing a program 2 errors found: File: C:\Documents and Settings\Project1.java [line: 7] Error: cannot find symbol symbol : class Scanner location: class Project1 File: C:\Documents and Settings\\Project1.java [line: 7] Error:

  • SHMA - Shared Objects

    hi folks, we're using shared objects and are wondering how it could be easily achieved to build the "sharded objects" automatically on ALL !!!! application-server, or do we have to start the build-programs per each server manually ???? kind regards,