Duplicates error in user forms (FND_USER)

Hi,
In System Admin: Security User: Define,
When I queried for some user "ABC", i got the error < ORA-01422: exact fetch returns more than requested... >. Refer below link for reference.
https://docs.google.com/leaf?id=0B5DraJWCbaqSMDkwZDlhM2UtM2I2Yy00NDk3LWEyZWMtZDA5MWMyZjEzNGI0&hl=en&authkey=CJGCnacC
But in FND_USER table, there is only one record with the user ABC.
Please provide solution how to fix this.
Regards,
a.v

Have you loaded any user data or responsibility data from sql?
Check if the fnd_user_u2 index is present or not?
Do the following to check if there are 2 users with the same user_name.
select count(1) from fnd_user where user_name ='ABC'
Do the following to check if the user has the same responsibility twice.
select count(1),responsibility_id from fnd_user_resp_groups
where user_id = (select user_id from fnd_user where user_name='ABC')
group by responsibility_id having count(1) > 1
If that does not give any clues, put a trace on before doing the query. Then do a tkprof to find the statement that gives you the error.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

Similar Messages

  • Duplicates in Users form (FND_USER)

    Hi,
    In System Admin: Security User: Define,
    When I queried for some user "ABC", i got the error < ORA-01422:exact fetch returns more than requested number of rows >. Refer below link for reference.
    https://docs.google.com/leaf?id=0B5DraJWCbaqSMDkwZDlhM2UtM2I2Yy00NDk3LWEyZWMtZDA5MWMyZjEzNGI0&hl=en&authkey=CJGCnacC
    But in FND_USER table, there is only one record with the user ABC.
    Please provide solution how to fix this.
    Regards,
    a.v
    Edited by: user5835216 on Feb 6, 2011 10:49 PM

    I think you are probably posting in the wrong forum.
    Did you drop the unique index APPLSYS.FND_USER_U2 on APPLSYS.FND_USER (USER_NAME) ?

  • Session Error - Cannot call getObject on :display.session on a user form

    On an end user form I have a manager label.
    The manager attribute in the user object holds the unique identifier but I must display the full name.
    <br><br>
    So I have the following code to go get the fullname:
    <br><br>
    <block>
    <invoke name='getAttribute'>
    <invoke name='getObject'>
    <ref>:display.session</ref>
    <s>User</s>
    <ref>accounts[Lighthouse].sponsor</ref>
    </invoke>
    <s>fullname</s>
    </invoke>
    </block>
    <br><br>
    Now it does go ahead and display the fullname but at the same time throws the following error on the page:
    <br><br>
    ERROR:XPRESS exception ==> com.waveset.util.WavesetException: Can't call method getObject on class com.waveset.session.LocalSession ==> com.waveset.util.InternalError: ID not passed to ObjectCache.getObject
    <br><br>
    Since it is not a workflow I think I need to use the :display.session reference.
    <br><br>
    Is there another approach I could try? Do you have any suggestions?

    You could also use the following for your session:
    <br><br>
    <invoke name='getCache'>
                      <new class='com.waveset.session.InternalSession'/>
    </invoke><br><br>
    But the biggest problem I see is the string value User. I think it needs the following:
    <br><br>
    <invoke name='findType' class='com.waveset.object.Type'>
                        <st>User</st>
    </invoke><br><br>
    Note: I used st instead of s to avoid a strikethrough.
    <br><br>
    If I'm not mistaken, your code could then look like this:
    <br><br>
    <block>
    <invoke name='getAttribute'>
      <invoke name='getObject'>
          <invoke name='getCache'>
                      <new class='com.waveset.session.InternalSession'/>
          </invoke>
          <invoke name='findType' class='com.waveset.object.Type'>
                        <st>User</st>
          </invoke>
           <ref>accounts[Lighthouse].sponsor</ref>
      </invoke>
      <st>fullname </st>
    </invoke>
    </block> <br><br>
    Best,
    <br><br>
    Andy
    <br><br>
    <b>AegisUSA</b>
    <br>
    Denver, Co
    <br>
    "We are the Identity Company"

  • ORA-04062 error when running forms with different users

    ORA-04062 error when running forms with different users
    I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
    I wrote a stored procedure to get the data from other user's tables.
    When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
    I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
    My Forms version is 6i with Patch 15.
    Database version is 9.
    Here is my stored procedure:
    TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
    TYPE Open_Curs IS REF CURSOR;
    PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
    Curs Open_Curs;
    i NUMBER;
    BEGIN
    OPEN Curs FOR
    'SELECT Seq_No FROM '|| User_Name ||'.scenario';
    i := 1;
    LOOP
    FETCH Curs INTO Scen_Table(i);
    EXIT WHEN Curs%NOTFOUND;
    i := i + 1;
    END LOOP;
    END Get_Senarios;
    I would be happy to solve this problem. It's really important.
    Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

    I think it should be a better solution to create a package,
    and put your own TYPES and procedure into it.
    CREATE OR REPLACE PACKAGE PKG_XXX IS
    TYPE TYP_TAB_CHAR IS TABLE OF .... ;
    PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
    END ;
    Then in your Form :
    Declare
    var PKG_XXX.TYP_TAB_CHAR ;
    Begin
    PKG_XXX.P_XX( 'user_name', var ) ;
    End ;

  • XML parsing error: not well formed Location:file///c:users/

    I have been trying to download tax info from the I.R.S site. When I try to open the downloads I get this error message:
    XML parsing error: not well formed
    Location: file///c:/Users/John/Downloads/available Transcripts.xhtml
    line number 1, Column 9

    Are you sure that this is an XML file and not some other file type like PDF that got saved with the wrong file extension?
    You can try to rename the file and change the file extension to .pdf to see if that works.

  • Need to raise an error if Users puts wrong value for date datatype in Forms

    Hi all,
    I've created a new form using Template.fmb in forms 10g having some text item with data type as DATE.
    and now i wanted to raise an error if users inputs any wrong data rather than DATE format.
    Please help me if anyone knows how to do this...

    b_kapsy wrote:
    As of now i am not looking for validation, i know the validation will automatically done but if you see by default it will not raise any error message if you fill any wrong value in text item with date data type. It will freeze the cursor to the text item.That is NOT the default. The default is to issue various FRM-nnnnn messages, between 50002 and 50026. From notes I have:
    -- 50002: Month must be between 1 and 12.
    -- 50003: Year must be 00-99 or 1000-4712
    -- 50004: Day must be between 1 and last of month.
    -- 50012: Date must be entered in a format like <fxMMDDRR>
    -- 50017,18,19: Hour,Min,Sec must be between 0 and 23,59,59.
    -- 50025: Date/time must be entered in a format like <xxyytttt>
    -- 50026: same as 50012 and 50025 with <yyyy> year.
    And from my old, dusty copy of the Oracle Developer/2000 "Messages and Codes Manual", those messages have an error level = 15.
    If you are not seeing those messages, then you have done one of two things:
    1. Set your System.Message_Level to a value of 15 or higher. You should NEVER set it above zero, since all that does is hides error messages like these. If you want to bypass or prevent an error message, it should be handled in the Re: FRM-40735:Pre_Insert trigger raised unhandled exception ORA-20011.
    2. You have some bad code in an On-Error trigger that fails to handle errors correctly.

  • Error in generating form with 6i

    I have installed designer 6i rel 2 with form developer 6i on NT
    4.0.
    When in design editor, I want to generate the form with generate
    module, the system generate "CDR-21600: A running Generator or
    Utility has failed."
    Also in action column writes: " It is possible that the internal
    cache is now in an inconsistent state. You are therefore
    recommended to close and restart the application."
    Could anyone tell me what is the problem and how to solve it.
    thanks

    Here is an document which describes some known causes of CDR-
    21600 errors. I hope it will help you.
    PURPOSE
    To describe some known causes of CDI-21600 errors and to
    suggest possible solutions and workarounds.
    SCOPE & APPLICATION
    This note was written for users of Oracle Designer releases 2.1.x
    and 6.0.
    CDI-21600 errors occur most frequently during Design Capture and
    when generating forms with the Forms and WebServer generators.
    Investigating CDI-21600 errors
    In Oracle Designer Release 2.1.2 and Release 6.0, this error has
    the form:
    CDI-21600 'A running generator or utility has failed'
    The Release 2.1.1 error message was: 'Generator or Utility throw
    an Exception'
    The CDI-21600 error message means that the generator is hitting
    an unhandled exception, also known as a GPF (general protection
    fault). The CDI-21600 error masks the underlying exception error.
    To see the real error do the following:
    1. Go into the Registry Editor (REGEDIT).
    2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
    3. Set EXCEPT_HANDLING to 0 (by default it is 1).
    Repeat the action that resulted in the error.
    Known Causes of CDI-21600 Errors and Possible Solutions
    Some of the reasons why CDI-21600 errors occur are listed below.
    1. A common cause of CDI-21600 errors is failure to install the
    necessary
    Developer patches.
    See [NOTE:64630.1] Developer Patches required to run
    Designer with Developer
    2. Check that Designer is running on a supported database. Also
    check that the
    TNS connection is correct.
    See [NOTE:60705.1] Designer Certification Matrix (HTML)
    3. Check for 'dangling' foreign keys, in other words FKs no longer
    owned by any
    table in the repository. Delete all invalid constraints.
    Invalid constraints may be created if you use the repository
    dump utility to
    dump and restore external foreign keys referencing tables
    shared into the
    application system, without dumping and restoring the tables
    that own them.
    If you restore a complete dump (rather than a 'skeleton' one),
    and then use
    the 'Reconnect Share Links' option when restoring, you may be
    able to
    resolve this problem.
    To get a complete list of 'dangling' constraints in your
    repository, connect
    using SQL*Plus and use the following query:
    SELECT app.name, key.name
    FROM ci_application_systems app, ci_constraints key
    WHERE key.table_reference IS NULL
    AND key.application_system_owned_by = app.id;
    You can also run CKAZANAL.ANAL_REFERENCES on your
    repository and delete all
    the invalid constraints that it finds. You can run the Repository
    Analyzer
    from: Front Panel -> Repository Administration Utility -> Utilities.
    NOTE: There may be inconsistencies in the repository that the
    Repository
    Analyzer cannot fix. You might solve such problems by
    dropping all the
    tables of your application, recreate them from the ERD,
    then use the
    DDT and recreate your modules.
    [BUG:847190] CDI-21600 during forms generation: 'dangling'
    foreign key
    "Since the generator is running on a repository that contains
    invalid
    constraints and the Repository Analyzer solves the problem,
    bug closed as
    unfeasible to fix."
    4. Check your modules for invalid or missing references such as
    missing window
    placements.
    5. Try generating your module against default templates and
    object libraries.
    6. When capturing forms or libraries, try capturing the form or
    library without
    application logic, then capture the application logic on its own.
    See [NOTE:1064690.6] CDI-21600 when capturing design of
    form with
    application logic
    [BUG:757541] DESCAP: CDI-21600 error reported when
    capturing with
    application logic
    Fixed In Ver: 6.0
    [BUG:926383] Duplicate of [BUG:757541] This has been fixed in
    2.1.2 patch
    779559. However you would be advised to apply a later patch
    such as 855635
    which fixes more bugs in this area.
    7. Make sure that all objects that are referenced by the form have
    been
    captured into the repository before capturing the form.
    8. A CDI-21600 will occur if a lookup usage displays only one
    column of
    datatype DATE or if the column of datatype DATE is displayed
    as the first
    item in the block.
    Workaround
    Add more column usages to the lookup block and do not
    display the DATE data
    type column usage as the first item in the block.
    9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
    Fixed In Ver: 6.5.3.0
    Workaround
    Make sure that you have an argument in the called module that
    is mapped to
    the "Argument Passed Value" in the calling module. The only
    way to get this
    mapping back once the APV has the <Module Argument> label
    is to delete it
    and recreate it.
    10. [BUG:801736] CDI-21600 on design capture of a form with
    subclassed object
    Fixed In Ver: 6.0.3.1.0 (backport)
    Fixed In Ver: 6.5
    You have an item that has been subclassed to an object.
    Checking the Design
    Capture option 'Capture Control Blocks' causes the CDI-21600
    error. Uncheck
    'Capture Control Blocks' and the problem does not occur. Open
    the FMB in
    Forms*Builder and look at Data Blocks -> Items. Break the link
    to the
    object, save the FMB, and the form will capture (similar to
    [BUG:794872]).
    Alternatively, ensure the link can be established.
    11. [BUG:850436] CDI-21600 on generation of a form with template
    having
    subclassed object group
    You try to generate a form out of Designer that uses a user-
    defined
    template. If a collection of objects in the template is grouped
    into an
    object group, dragged into the object library and then either
    copied or
    subclassed into a form, when the form is generated you get a
    CDI-21600
    error.
    12. [BUG:822659] Module generation fails (CDI-21600) with multi-
    column PK having
    long prompt text
    Fixed In Ver: 6.5.3.2
    Module generation with multi-column primary key having long
    prompt text
    causes CDI-21600 with preference MSGSFT set.
    Workaround
    Shorten the prompt text of PKs may not be not applicable. You
    may loose end
    user information.
    You may have the same problem with a mandatory compound
    FK. CASEOFG tries to
    generate a message '<P1> must be entered', where <P1>
    contains all the
    prompts of the bound items from the FK. If you reduce the
    length of the
    prompts, or set MSGSFT = NULL or WEDI = S or property
    Mandatory?=No, it
    works correctly.
    13. [BUG:792542] Capturing application logic causes CDI-21600
    (V2 style
    triggers)
    Fixed In Ver: 6.5.5
    After removal of the v2 triggers, the form captures/merges OK
    on 5.0.24.8,
    provided patch 875027 has not been applied.
    14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
    key components
    Fixed In Ver: 6.5.11
    Generating a module with tables having a primary key not
    correctly defined
    (no PK component) will cause a CDI-21600 error. This can
    occur when
    unloading a module from the RON. If you pick up the module
    (and only the
    module) in the unload set, the table and its PK are unloaded as
    a skeleton.
    Loading the .DAT file into a new application will create a PK
    without a
    component.
    15. [BUG:771549] CDI-21600 if cannot connect to the DB with
    connect string in
    Options (Compile)
    Fixed In Ver: 6.5.13
    If you cannot connect to the DB with the connect string
    specified in options
    (Compile), the forms generator will fail with CDI-21600.
    This problem occurs when you cannot connect to the DB
    because:
    - the username or password is wrong;
    - or the SQL*Net alias is not defined in the TNSNAMES.ORA
    file;
    - or the SQL*Net listener is not started;
    - or the DB is down.
    16. [BUG:785106] CDI-21600 when generate master detail form
    with preserve layout
    [BUG:855812] is a duplicate of this bug.
    Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
    Fixed In Ver: 6.0
    Fixed In Ver: 6.5.3
    You have a master-detail Form with the Master having items
    partly on a TAB
    Canvas. Generate Module works OK. You enter Forms Builder
    and move some
    items on the tabs (just small changes, items are still on the
    same tabs).
    You change the look of the Detail and change Records
    Displayed. Now in
    Designer you generate the Module with Preserve Layout. You
    get a CDI-21600
    error. The problem might reproduce without doing any changes
    in Forms
    Builder, just by generating with Preserve Layout.
    17. [BUG:891306] If primary key column of lookup in check
    constraint comment of
    base table
    Fixed In Ver: 6.5.5
    Workaround
    Do not use the name of the bound item that is based on the
    primary key
    column of the lookup table in a check constraint comment of
    the base table.
    18. [BUG:896026] Forms gen throws assertion failure in
    CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
    Fixed In Ver: 6.5.7
    A problem is caused by a PL/SQL definition (function, package,
    procedure)
    being defined as a called module for the module you are trying
    to generate.
    To resolve the problem and enable the module to be generated,
    remove all
    Called Modules that are PL/SQL definitions (functions,
    procedures or
    packages).
    See [NOTE:2107207.6] CDI-21600 during generation of module
    or Assertion
    Failure \cv\cvi\cvibni.cpp
    19. [BUG:812333] CDI-21600 generating a web module after
    adding an unbound item
    Fixed In Ver: 6.5.3.0
    Backport [BUG:1280667] raised to fix by 6.0.3.9
    You add an unbound item (SQL expression) to a Web module.
    When you try to
    generate the module you get a CDI-21600 error. If you delete the
    unbound
    item the Web module generates correctly.
    In a test case the problem occurred during validation of the
    derivation
    text, if the master module component was in a different module.
    A workaround
    was to rearrange module components so that this was not the
    case.
    20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
    WHEN GENERATING INCORRECT
    DERIVATION EXPRESSION
    Message
    CDR-21605: Failed while processing Module <mod> in function
    CCVDiag::TraceGeneratorMessage BOF
    Cause
    The generator failed due to an unexpected error - the
    error indicates the object the generator was processing
    when it failed.
    Helena

  • Error while user creation/search

    Hi,
    I am getting the following exception while trying to create/search a user in OIM 11gR2
    oracle.mds.exception.MDSRuntimeException: MDS-00010: DuplicateRefException. In document /oracle/iam/ui/runtime/form/view/pages/userCreateForm.jsff there are multiple elements with the same ID _xg_pfl0
    Moreover I am not able to view the user form wherein I can add custom attributes. Searching Form Designer is returning no result.
    All other functionalities are working properly.

    You get this error if you have duplicate component ids on one of your pages.
    MDS its the meta data service which is used to store information about a jsf page in a special repository.

  • Error while generating form 16 in portal - Screen output without connection

    Dear Gurus,
    We are facing error while generating form 16 through portal and getting the below error in portal.
    Screen output without connection to user.    error key: RFC_ERROR_SYSTEM_FAILURE
    When we checked for dumps in R/3 the following dump is coming:
    DYNPRO_SEND_IN_BACKGROUND with error message :
    Message class : FPRUNX
    Message number: 102: No job started.
    Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
    We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
    We are not getting clue as to why this is happening. <<Text removed>>
    Regards
    Edited by: Matt on Jul 27, 2011 9:50 AM

    Dear,
    This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
    Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
    it. And try to call same transaction again.
    BR, Deepak

  • Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

    since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
    XML Parsing Error: not well formed
    locations chrome://browser/content/browser.xml
    Line Number 1191, column 20:
    utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
    please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
    I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
    Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
    1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
    2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
    3. there may have been other errors, but I did not find them.
    How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
    Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
    Thanks,
    NOEL

    Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
    firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

  • How can i disply the error in my forms which occurs from plsql package

    Dear all
    i am using 10g forms.
    i have a package and in the pkg i am reading data from flat file using UTL_FILE and comparing with what user input in the form .
    If that does not match then it is raising errors . but how can i display those errors in my forms .
    Let say in my PKG The error is "Account no does not match " . this error message i wnat to show in my Forms .
    For the error i have created one block :error.err_dtl.
    I want to show here in :error.err_dtl.

    Hello,
    Several solutions:
    You can write a procedure or a function in that package that returns a Boolean and/or an error message.
    You can also, in your package, raise the RAISE_APPLICATION_ERROR(), then trap this error in the Forms calling code, via the DBMS_ERROR_CODE and DBMS_ERROR_TEXT variables.
    Francois

  • Getting error while running form migrated from 4.5 to 6i

    I have a form built in 4.5. I have open that form in 6i and compiled it. Generated the fmx out ofit. but when I run that form then it gives me an error :
    frm40735:pre-form trigger raised unhandled exception ora-01403
    Could any one please help me out ??

    ORA-01403: no data found
    You tried one of the following in your pre-form trigger
    You executed a SELECT INTO statement and no rows were returned.
    You referenced an uninitialized row in a table
    Or connected user hasn't privileges on table's Block

  • OIM 11G-prepop adapters not able to read from User form

    When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
    I tried remapping..ect etc..ntng helped.
    None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
    Pls. help me with this.
    Thanks.
    ~VSN
    I get the below errorr:
    <BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
    java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
    at java.lang.Throwable.<init>(Throwable.java:67)
    at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
    at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
    at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
    at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
    at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
    at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
    at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
    at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
    at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
    at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
    at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
    at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
    at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
    at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
    at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
    at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
    at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
    at $Proxy284.execute(Unknown Source)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
    at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
    at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
    at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
    at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
    at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
    at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
    at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy382.onMessage(Unknown Source)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
    at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
    at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
    at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Kevin,
    For manual Proviosioning - It works fine.
    It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
    As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
    Steps I tried Already:
    1- Checking access policy
    2-remapping process form adapters
    Pls. let me know ur thoughts.
    ~VSN

  • Display error message in forms from function "verify_function"

    Hi,
    We have a number of users with our own created profile attached to them.
    We have enabled the 'PASSWORD_VERIFY_FUNCTION' for our own profile.
    Function "verify_function" is used to validate a user's password.
    In "verify_function" we have used "raise_application_error" message in case password validation fails.
    Example:
    raise_application_error(-20001,'Password must be minimum 8 characters in length and maximum 30 characters long');Question) "raise_application_error" displays the error message only in SQL Plus prompt. How do I display the same message from Oracle forms?.
    I have used DBMS_ERROR_TEXT & DBMS_ERROR_CODE in ON-ERROR trigger. This is not displaying the error message in forms in case validation failed in "verify_function". Oracle simply clears the username/password field with a new window. We want to display the error message that occured in "verify_function".
    Thanks

    use the following code in validating the item, e.g when-button-pressed
    begin
    verify_function;
    exception
    when others then
    message(sqlerrm);
    raise form_trigger_failure;
    end ;
    OR
    instead of writing a procedure rewrite it as a function to return 1 if password is correct or 0 if password is wrong
    Regards
    Jihad

  • What is  (ParamErr: error in user parameter list)

    I get the following error message when I try to send my imovie '11 project to iDvd:
    Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
    Anybody know why?

    There may be more than one cause for this error, but in most cases the project to be published includes short clips of less than about 1.5 seconds duration.
    Duplicate the project. From the duplicate, delete the short clips and try to publish. If that doesn't solve the problem, see the post by Didorx in this thread.

Maybe you are looking for