Duplicates when Importing into Aperture

When I import photos into aperture from either my camera or computer, it imports 2 copies of each photo. How can I get it only import 1 copy?

That is definitely not normal behavior unless you are shooting both RAW+JPG and importing them both asseparate masters.
What are your settings in the Aperture import window, especially the setting for RAW + JPEG Pairs?

Similar Messages

Considering buying aperture. Have raw images processed in NIK NX2 software. What happens to those files when imported into Aperture?

Understand NiK is discontinuing Capture NX2. Therefore would like to buy Aperture as host for image management. If I do purchase and import RAW files previously processed in NX2 into Aperture. Is old processing retained? Doubtful. Or is new processing required? Have an iMac with iPhoto 10 etc.

Richard and Beverly wrote:
If I do purchase and import RAW files previously processed in NX2 into Aperture. Is old processing retained?
You can import the image files converted from RAW and edited by NX2 but they will no longer be RAW NEF files they will be non-lossy TIFF files or lossy JPEG.
Or you can import the original RAW NEF files into Aperture for Aperture to do the RAW conversion.
To my eyes/brain with the Nikon cameras I use (D2x, D100, D5100) I find that NX2 provides the most pleasing RAW conversions, but I still use Aperture for its great workflow.
HTH
-Allen

RAW NEF files imported into Aperture from a Nikon D70 are dark

I imported one roll of images straight from the CF card from my Nikon D70 into Aperture.
I also imported them into Nikon PictureProject. (the current application I use)
All the NEF's in Aperture are darker than the NEF's in PictureProject. Has anyone else seen this issue?
Also, any NEF that I have previously edited and saved in Nikon Capture Editor, do not display any of the changes when imported into Aperture. Interesting that the Finder shows the thumbnail correctly. Has anyone else seen this issue?
Thanks, Scott K.

I've imported a few of the NEF files I've gotten from my D2X, and for the most part, they look fine. A little darker than when displayed in Adobe Bridge and ACR, but not that much darker. This is probably just the way the image converter is interpreting the RAW data. A couple of minor levels adjustments for me, and they look fine.
As for Aperture not "seeing" the changes made to a RAW file in Nikon Capture. That may be due to the way Capture applies its changes to the file. If when you make a change, Capture simply adds the adjustments to a side car file, etc., and doesn't change the original RAW file (which it should never do), then Aperture is only reading the original RAW data. The side car info is not understood by Aperture. At least not now.
This is pretty much the same way ACR works.
Jeff Weinberg

Advice/howto on disorganised photos that need to be imported into Aperture

I have about 5-6 years of photos that are in different folders across my backup hard drives that I want to import into Aperture.
There are many duplicates as I had working folders that I copied periodically onto external drives into dated backup folders. When the working folders filled up, I'd delete older files to make space, knowing that I had the files backed up. I didn't perform any type of file management. Hence the backup folders contain duplicate files.
i.e.
Feb 03 backup folder contains files for Feb 03
Mar 03 backup folder contains files for Feb 03 and Mar 03
Apr 03 backup folder contains files for Feb 03, Mar 03 and Apr 03
I then run out of room on the working drive, so delete the files from Feb 03 to free space.
May 03 backup folder contains files for Mar 03, Apr 03 and May 03.
I now want to import all the files from the backup folders into Aperture, but know there will be many duplicates. Is there any way I can manage the import such that I prune out duplicates across the folders? Either within Aperture or using an external program/script. These are all original files that have not been edited.
Thanks,
Phil B.

Thanks for the advice.
I actually searched the archives after I asked the question and this comes up a lot.
I'm currently trying MrClean as a solution to delete duplicates first, and if that does not work out, will try Tidy Up!
Regards,
Phil B.

Migrating iphoto 9 with duplicate misplace FACES into Aperture 3

After importing my iphoto library all the originals and modified photos are changed into stacks. The program creates faces for both the modified and the original image. The huge problem is that if my modified image was cropped all the face rectangles are shifted. Thus not only do i get duplicate faces and unneeded photos but the duplicate faces are not even correctly labeled.

Allan,
When you import the default will probably be to store the photos in Aperture's library. This will make a copy of your photos and is called "Managed masters" in Aperture. As long as this what happens when you import, you will then definitely have 2 of each photo that you imported. It's not going to duplicate your iPhoto library per se (the library is a database that contains all the pictures and other goodies). Rather, it will copy each photo from your iPhoto library into a new library (the Aperture one).
You can also have Aperture use "Referenced" masters, by doing what gordonbmac indicated. In this case, Aperture does not manage the location of your masters. They will be wherever iPhoto has them. This may or may not be good depending on what you are going to do with your iPhoto library after. I.e., if you play with iPhoto and rearrange things, Aperture doesn't know that you moved the masters that it points to. It may mean that you will have to keep your iPhoto library around because Aperture is pointing to photos in it.
Your plan to move the iPhoto library to an external hard drive is exactly what I did when I imported my iPhoto library into Aperture. I kept it around for quite a while until I was satisfied that I didn't accidentally leave something in there that I didn't import into Aperture.
nathan

Photostream - do you automatically import into Aperture?

Interested to hear from some advanced and pro Aperture users as to whether or not you have your Photostream automatically import into Aperture, I've done this without putting much thought into it but its led to having many unneccessary photos in my library, plus I import my iPhone photos manually from time to time (paranoid Photostream has missed some I guess). Thanks.

So should I be assured that no matter what all photos I take on my iPhone are automatically imported and hence I can stop manually importing them from time to time and hence causing more duplicates etc?
I am not sure, if I understand your concern correctly.
When you are taking photos with your iPhone, they will upload to the photo stream and be stored in iCloud. But you have plenty of time, befor ethey will upload. Photo Stream will only start the upload, when the iPhone is connected to Wi-Fi, when the battery is properly charged, and when the camera.app is closed.
Your mac will import the photos only once. when you import from the iPhone and the photos have already been downloaded from the stream, they will not show in the Import panel.

Completely auto import into Aperture

hi,
i'm looking to completely automate the import into aperture...whether i connect my iphone or the sd-card from my nikon, i would
like aperture to open, import the photos into the pre-defined project and then delete the photos, without answering any questions
from aperture.
currently, i have it set so that aperture opens when things are connected, but the import process doesn't start by itself, etc.
does anyone know if this is possible?
thanks,
pete

Aperture has no built-in automatic import. You would have to program an Automator script.
import the photos into the pre-defined project and then delete the photos, without answering any questions
from aperture.
This is risky - I'd reconsider, Pete. We have seen many cases here, where the import went wrong, and if you delete the originals from the card, before you check them after importing, you may be deleting your only copies. The recommended way is to wait until the first backup of your photos has been completed, before you delete photos from your card.

What happens to CC or Watermarks when imported into PrPro

HI all,
my question (s) are about information that is stored in the out of tv safety feilds when imported into Adobe premeir pro. files will be mpeg-2 video files SD and Hd
1) what happens to closed Captioning data (does it get moved or is it stripped)?
2) what happens to Nielsen watermarks on line 22 and 20?
Can anybody give me an understanding of this.
thank you much!!
Jay Agoglia

Nothing happens to the music on your computer. Nothing will "combine" unless this other person actually downloads something to your computer. Simply logging into an iTunes account does not instigate any automatic downloads of anything.

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

Imported ID pdfs appearance alters when imported into Quark as picture

Can anyone tell me why Indesign created pdf's change when imported into a quark picture box? I receive ads from various companies for a magazine in hi-rez pdf formats and when imported the appearance changes to include all the components/elements/boxes/etc. of the make-up of the ad....the things that are not supposed to be seen. Please help... advertisers are complaining and i can not stop it, or fix it.

Quark converts PDFs to EPS internally and thus has no support for the
more advanced features of PDFs exported from InDesign.
You should request EPS or PDF X/1-a if you want to continue to use
Quark. That said, this is an InDesign forum so I will heartily recommend
you switch to InDesign.
As you've discovered more and more folks are doing just that and you're
going to be left in the dust and those advertisers are going to be
looking elsewhere to spend their money.
Bob

Help! Photoshop edited jpg color distorts when imported into Muse

Okay, so I am trying to build a photography webpage (among others) and I edit most of my photos in photoshop. All photos that I edit in photoshop and save to jpg, look great when printed, uploaded to facebook, etc. however when I import them into Adobe Muse for and put them on my webpage, the colors of the photos become desaturated and/or slightly distorted (so that they look dull). When I edit images in lightroom and save them as jpg and import them into Muse, they look fine, but colors edited in photoshop seem to mess up my photos when imported into Muse.
What am I doing wrong?!
Susan

You are using some odd color management settings and not converting to sRGB most likely... Check your settings in PS itself and the Save for Web dialog and experiment around.
Mylenium

Swf's/flash,banners When Importing Into Dreamweaver Put Out Slices..

Hi guys/gals
I think im doing it wrong or missing something, even have a funny feeling i might have to use some css? Not really sure.
My problem is after i have saved my move,banner - when imported into dreamweaver it puts all the slices out of whack ?
I cant find anywhere to import it into my photoshop layout, can't "Bring to front" in dream weaver <- ? :/
I have searched everywhere and I can't find with my terms what im looking for..I figure if nothing is coming up then im going about this
the wrong way
Any help would be muchly appreciated.
J

Hi
Slicing images from a photoshop comp and then creating a web page from them is never a good idea, and will present many compatibility problems for you. A better alternative is to use css based layouts, this does not mean that you must forget what you have done in photoshop just that the procedure is probably slightly more complex for someone who has not used css layouts before,
A good place to start would be the css basics tutorial then the, using css starter pages tutorial from the tutorials shown on this page - http://www.adobe.com/devnet/dreamweaver/css.html.
(the 2 tutorials mentioned are - http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html, and http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html.
There is also a number of videos that may interest you at - http://tv.adobe.com/product/dreamweaver/.
PZ

How do I correct the darkest blacks from becoming bright blue when imported into LR?

When shooting in RAW with a Sony RX100M3 the darkest blacks become bright blue when imported into LR. Any ideas when this happens and how I can fix it?

If this is occurring in the develop module the you have the shadow warning turned on and this shows as blue, just like the highlights show as red. You can turn this off by clicking the triangle in the upper left hand corner of the histogram.

Aperture Not Recognizing Duplicates When Importing From iPhone. PhotoStream is Involved.

Apple makes great software. Aperture is not some of it.
Here's my setup:
'11 MacBook Air OS X Lion
Aperture 3.2.2
iPhone 4 ios 5.0
1.5 TB External Drive. Aperture Masters and Library reside there, separate from each other.
I keep my photos in a structure such as: Aperture Masters > Year > Month > Date > original_photo_name
I'm running into trouble with Aperture not recognizing what photos are duplicates when it comes time to import photos. My workflow is that I'll import photos every so often, leaving them on the iPhone, and delete them twice a year.
ISSUE 1 (The Annoying One):
Aperture is showing a lot of photos that have already been imported even if I select "Don't Import Duplicates". Aperture has done this for a long time. I know that when it comes time to importing them, it doesn't import the duplicates, but this is just a sign that something doesn't work very well. (Maybe it's because I switched to an iPhone 4S and then back. I synced all my photos, and then back again to my iPhone 4, so the sequential number of the photos remained intact. I don't think that's the problem though.). This is just a minor annoyance that shows that Apple can suck at software (remember MobileMe?).
ISSUE 2 (The serious one):
short version: Some photos on my iPhone won't sync to my Aperture library because it thinks they've been synced through PhotoStream. They are not in my Aperture Library or in my Aperture Masters in the filesystem. How can I fix this. What bloody file do I have to delete for Aperture to stop being confused?
longer explanation: When iOS 5 came out, I was excited by PhotoStream. I had enabled it on my MBA, through iPhoto (I hadn't installed Aperture on it yet, as I was using an iMac to manage my Aperture Library). I believe it synced a bunch of photos from my iPhone, but then I stopped using it on my mac. Left it on on my iPhone. Installed Aperture. I initially enabled PhotoStream but swiftly disabled it once I was not sure how it would deal with photos being uploaded from my mac etc - just seemed like too much magic was going on. I then proceeded to sync my iPhone, not importing duplicates, and it synced a bunch of photos, but didn't sync some of them, displaying the following message:
Any tips on how to fix this and be able to import those images would be greatly appreciated.
P.S. - I thought that iPhoto might be causing the problem. I checked there and there were some images imported through PhotoStream, but not some of the ones which were not imported on Aperture. Putting that another way: the iPhoto library accounted for some of the images that were not imported, but not all of them. I deleted the iPhoto Library and tried reimporting with Aperture. Still no luck.

I have precisely the same problem. Very annoying. Worked fine with iPhoto, borked with Aperture 3.

Pictures in Idisc not showing up for import into aperture 3

When I attempt to import photos from the Idisc into Aperture the photo are not visible in the import window. This is also true for a thumbdrive. I can see them on the Idisc or thumbnail drive if I open the disc or thumb drive and I can open them directly into finder. Why are they not visible from within Aperture?

Select a button and see if the asset is set to be the video and appropriate timecode where there's actually a picture and not a black screen (depending on what kind of production this is, obviously..)

Duplicates when Importing into Aperture

Similar Messages

Maybe you are looking for